CONSTRUCTION OF PRAYER HALL AND CLASS ROOM AT KALAVAD HIGH SCHOOL CAMPUS FOR KALAVADMUNICIPALPALITY AT KALAVAD DISTRICT, JAMNAGAR. 2nd Attempt

Name of Work :- Construction of prayer Hall and class room at Kalavad high school campus for Kalavad Municipalpality at Kalavad District,

Quantity Unit Item Items of work. Tendered rates Per Total amount

Quantity Unit Item Items of work. Tendered rates Per Total amount

estimated No. according to

estimated quantity.

but may be Rs. In figure Rs. In words

246.00 Cum. 1 Demolition including stacking of serviceable 1108.12 one thousand one hundred Cum.

materilas and disposal of unserviceable materials eight rupees and twelve

with all lead and lift. (i) R.C.C. work paise

108.00 Cum. 2 Demolition of Brick work and stone masonry 576.30 five hundred seventy-six Cum.

including stacking of serviceable materilas and rupees and thirty paise

disposal of unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

163.00 Each 3 Dismentling doors, windows, ventilators etc. 263.35 two hundred sixty-three Each

(wood or steel) shutters including chowkhats rupees and thirty-five paise

architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and

lift.(ii) Exceeding 3 Sq.M. in area.

692.00 Sqm. 4 Dismentaling tiled of stone floors laid in mortar 50.28 fifty rupees and twenty-eight Sqm.

including stacking of serviceable materilas and paise

disposal of unserviceable materials with all lead

752.00 Cum. 5 Excavation for foundation in all sort of strata for all 213.61 two hundred thirteen rupees Cum.

depth including sorting out and stacking of useful and sixty-one paise

materials and disposing of the excavated stuff

with all lead. & lift .

51.00 Cum. 6 Providing & Laying Cement concrete 1:2:4 (1- 3803.65 two hundred thirteen rupees Cum.

Cement:2-Coarse sand:4-Crush stone aggregate and sixty-one paise

20MM nomiman size) and curing complete

excluding cost of formwork in Foundation and

81.00 Cum. 7 Providing and Laying Controlled C.C. M-300 4795.48 four thousand seven hundred Cum.

with curing etc. complete including the cost of ninety-five rupees and forty-

formwork but excl. the cost of reinforcement for eight paise

R.C.C. work in foundation, footing, base of

columns and mass concrete.

21.00 Cum. 8 Providing and Laying Controlled C.C. M-300 with 4968.19 four thousand nine hundred Cum.

curing etc. complete including the cost of sixty-eight rupees and

formwork but excl. the cost of reinforcement for nineteen paise

R.C.C. work in Columns Upto Plinth.Below G.L.

86.00 Cum. 9 Providing and Laying Controlled C.C. M-250 7981.83 seven thousand nine Cum.

curing etc. complete including the cost of hundred eighty-one rupees

formwork but excl. the cost of reinforcement for and eighty-three paise

R.C.C. work in Columns for all floor.

59.00 Cum. 10 Providing and Laying Controlled C.C. M-300 with 5954.96 five thousand nine hundred Cum.

curing etc. complete including the cost of fifty-four rupees and ninety-

formwork but excl. the cost of reinforcement for six paise

R.C.C. work in PLINTH BEAMS for all size.

122.00 Cum. 11 Providing and Laying Controlled C.C. M-250 5872.83 five thousand eight hundred Cum.

with curing etc. complete including the cost of seventy-two rupees and

formwork but excl. the cost of reinforcement for eighty-three paise

R.C.C. work in Slab Beams for all floors

7.00 Cum. 12 Providing & Laying Controlled cement concrete M- 5077.59 five thousand seventy-seven Cum.

250 and finishing smooth with curing etc. rupees and fifty-nine paise

complete, including the cost of formwork but

excluding the cost of reinforcement for R.C.C.

work in Coping all floors

143.00 Cum. 13 Providing and Laying Controlled C.C. M-250 7242.02 seven thousand two hundred Cum.

with curing etc. complete including the cost of forty-two rupees and two

formwork but excl. the cost of reinforcement for paise

R.C.C. work in Slab for all floors.

6.00 Cum. 14 Providing and Laying Controlled C.C. M-250 8262.53 eight thousand two hundred Cum.

with curing etc. complete including the cost of sixty-two rupees and fifty-

formwork but excl. the cost of reinforcement for three paise

R.C.C. work in Staircase for all floor.

10.00 Cum. 15 Providing and Laying Controlled C.C. M-250 6532.49 six thousand five hundred Cum.

with curing etc. complete including the cost of thirty-two rupees and forty-

formwork but excl. the cost of reinforcement for nine paise

R.C.C. work in Lintel for all floors

5.00 Cum. 16 Providing and Laying Controlled C.C. M-250 8908.90 eight thousand nine hundred Cum.

with curing etc. complete including the cost of eight rupees and ninety paise

formwork but excl. the cost of reinforcement for

R.C.C. work in Chhajja all floors

101.00 Cum. 17 Providing and laying Cement Concrete 1:4:8 (1- 2942.13 two thousand nine Cum.

cement : 4-coarse sand :8-crushed stone hundred forty-two rupees

aggregates stone 40mm nominal size) and curing and thirteen paise

complete excluding the cost of form work in

Foundation & plinth.

39.00 Cum. 18 Brick work using common burnt clay building 4310.73 four thousand three Cum.

bricks having crushing strength not less than hundred ten rupees and

35kg. / sq.cm. in cement mortar 1:6 (1-cement:6- seventy-three paise

fine sand) in foundation & plinth.

4.00 Sqm. 19 Half brick masonry in clay building bricks having 640.77 six hundred forty rupees Sqm.

crushing strength not less than 35kg. / and seventy-seven paise

sq.cm.in cement mortar 1:4 (1-cement:3-fine

sand) in Foundation and Plinth.

1087.00 Cum. 20 Filling available excavated earth (excluding rock) 137.47 one hundred thirty-seven Cum.

in trenches plinth side of foundations etc. in layers rupees and forty-seven

notexceeding 20 cm. depth consolidation each paise

deposited layer by ramming and watering.

2085.00 Cum. 21 Filling in foundation and plinth with murrum or 304.60 three hundred four rupees Cum.

selected soil in layers of 20cm. thickness and sixty paise

including watering, ramming and consolidating

630.00 Cum. 22 Brick work using common burnt clay building 4614.83 four thousand six hundred Cum.

bricks having crushing strength not less than fourteen rupees and eighty-

35kg./ sq.cm.in Super structure above plinth three paise

level in cement mortar 1:6 (1-cement:6-fine

sand) in super structure for all floors.

45.00 Sqm. 23 Half brick masonry in clay building bricks having 739.58 seven hundred thirty-nine Sqm.

crushing strength not less than 35kg. / rupees and fifty-eight paise

sq.cm.in cement mortar 1:3 (1-cement:3-fine

sand) in super structure for all floors.

51471.00 Kg. 24 Providing Thermo machinery treated bars 95.60 ninety-five rupees and sixty Kg.

(TMTbars) confirmed to I.S. 1786 FE-550D for paise

R.C.C. work including bending,binding and

placing in position complete etc. for all floor

29.00 Sqm. 25 Providing and fixing 30mm thick flush door solid 7957.79 seven thousand nine Sqm.

core consolidation of ISI quality with both side hundred fifty-seven rupees

lamination inculding black granite frame of 20mm and seventy-nine paise

thick with inner strip of 180x20mm and outer strip

of 150x20mm inculding fixing with adhesive

material to make the door frame cutting 45° for

vertical & horizontal member inculde fixing the

door withal heavy type s.s. fixtures and fastening

with mortise lock etc. comp.

13.00 Sqm. 26 Providing and fixing FRP frame size 100 x 50mm and 2377.76 two thousand three hundred Sqm.

28mm thick FRP depress panel shutter having extra seventy-seven rupees and

reinforcement on sides and edges and in gel coat seventy-six paise

finish. The core of the shutter is to be filled up with

injected fire retardant grade polyurethene foam done

insity along with embedded wooden pieces for

stiffening and also for taking hinges and fixtures. The

whole FRP frame and shutter is to be water proof,

weather proof, tensile proof and resistance to mild

acid/alkali. Rates are to be inclusive of S.S. hinges

with necessary screws and heavy type s.s. fixtures and

fastening etc. comp.

80.00 Sqm. 27 Providing & fixing window having extruded 1705.67 one thousand seven hundred Sqm.

alluminium colour anodized section frame main five rupees and sixty-seven

outer size 63.50x38.10x1.95mm (of Jindl section paise

no. 4605, @ wt. 1.094 Kg./Rmt.), horizontal two

track member size 61.85x31.75x1.20mm (of Jindl

section no. 8758, @ wt. 0.659 Kg./Rmt.), with

sliding shutters of horizontal member size

40mmx18mmx1.29mm ( (of Jindl section no.

8947, @ wt. 0.456 Kg./Rmt.) / section 8948, @

wt. 0.457Kg./Rmt.), with 5mm thick transparent

bronze colour tinted float glass with powder

coated alluminium fittings and ixtures and

transparent silicon sealant glass fixing to frame as

per detailes etc. complete for window

3.00 Sqm. 28 Providing and fixing standared extruded of 1175.56 one thousand one hundred Sqm.

alluminium section of size 63mm x 38.10mm x seventy-five rupees and fifty-

1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) six paise

with colour Powder Coated alluminium frame for

ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation.

1440.00 Kg. 29 Providing and fixing M.S. Pipe grills to windows & 118.17 one hundred eighteen rupees Kg.

ventilators etc. welded with M.S. flats around and seventeen paise

using M.S. polished pipe of 16MM dia. Fitted with

round headed bolts and nuts or by screws etc.

complete. complete including applying one coat of

primer and two coat of enamel paint.

43.00 Sqm. 30 Providing & laying 20MM thick Green marble slab 2424.00 two thousand four hundred Sqm.

flooring in single piece over 20mm (average) twenty-four rupees

thick bases of cement mortar 1:6 (1- cement, 6-

coarse sand) only. LM 1:1:5 laid over and

jointed with grey Cement slurry including

rubbing and polishing etc. complete.

16.00 Sqm. 31 Providing & laying 20MM thick Green marble slab 2505.81 two thousand five hundred Sqm.

flooring over in skirting, risers of steps and dedo five rupees and eighty-one

on 10MM thick cement mortar 1:3 (1 cement : 3- paise

coarse sand) and jointed with white or colour

cement slurry including finished with flush pointing

and cleaning the surface etc. complete.

885.00 Sqm. 32 Providing and laying 24" X 24" Vitrified 8mm thick 1472.91 one thousand four hundred Sqm.

tile flooring over 20MM (average) base of cement seventy-two rupees and

mortar 1:6 (1 cement : 6-coarse sand) on new ninety-one paise

surface or fixing on existing flooring by adhesive

material including dismentalling of existing

flooring and jointed with colour cement slurry

including finished with flush pointing and cleaning

the surface etc. complete for light shade.

62.00 Sqm. 33 Providing and laying 24" X 24" Vitrified 8mm thick 1789.72 one thousand seven hundred Sqm.

tile in skirting, risers of steps and dedo on 10MM eighty-nine rupees and

thick cement mortar 1:3 (1 cement : 3-coarse seventy-two paise

sand) and jointed with white or colour cement

slurry including finished with flush pointing and

cleaning the surface etc. complete for light shade.

49.00 Sqm. 34 Providing and fixing wooden low hight platform 7822.45 seven thousand eight Sqm.

having size 4.50x10.87x1.05 Mt Height. The dais hundred twenty-two rupees

made up of Indian teak wood with chemical and forty-five paise

treatment wood must be seasoned and passed

out from byflex chemical treatment, wood must be

passed of 10% high temprature of seasoning

chamber, wood joints are properly fill up by fevicol

adhesive SH. The heavy wooden leg's are used

for strength of dais. The size of leg's

100mmx100mmx380mm height, the base support

of the dais will be of size :-64mmx50mm & length

as per requirement. The top of platform using with

good quality of Seasoned indian teakwood with

size of flanks minimum 250MM width & thickness

of 38mm. The flanks joints with each other tongue

and grooves with fevicol adhesive SH ,where ever

required. As per design and drawing along with

necessary fixtures and hardware. Inclusive cost of

three coats malamine sprey Polishing, with

approved brand & quality. The quoting price

should be inclusive of all types of taxes & duties,

packing, forwarding, loading, unloading (R.A.31)

403.00 Sqm. 35 Providing and Laying 40mm thick cement 297.55 two hundred ninety-seven Sqm.

concrete flooring 1:2:4(1-Cement:2-Coarse rupees and fifty-five paise

sand:4-Graded stone aggregates 20MM nominal

size) laid in one layer finisded with a floating coat

of neat cement.

403.00 Squ. 36 Providing and Laying broken china Mosaic 779.70 seven hundred seventy-nine Squ.

flooring for terrace using 12mm to 20mm broken rupees and seventy paise

pieces of glazed tiles to laid over cement mortar

1:3 to plain or slope and to be tempared to bring

mortar crème out upto surface using white cement

including rounding off junctions and extending

them up to 15cm. along the wall clearing with

water and oxalic acid etc. as directed.

32.00 Sqm. 37 Providing & Laying Ceramic tiles 6mm thick in 1017.30 one thousand seventeen Sqm.

flooring, tread of steps and landing laid on a bed rupees and thirty paise

of 12mm thick cement mortar 1:3 (1-cement, 3-

Coarse sand) finished with a flush pointing in

white or colour cement.

125.00 Sqm. 38 Providing & Laying coloured glazed tiles of the 1523.67 one thousand five hundred Sqm.

size 300mm x 200mm x 8mm / 300mm x 450mm twenty-three rupees and sixty-

x 8mm in skirting, risers of steps and dedo on seven paise

10mm thick cement mortar 1:3 (1-cement, 3-

Coarse sand) & jointed with white cement slurry.

28.00 Sqm. 39 Providing & Fixing both side mirror polished Kota 1019.39 one thousand nineteen Sqm.

stone 25mm (Avg.) thick of approved quality full rupees and thirty-nine paise

moulded round front edge fixed in wall inclu.

making groove in wall & finished the same in

cement mortar 1:2 (1-Cement : 2-sand) for

partition in urinals and filling the joints with grey or

colour cement slurry in including rubbing and

polishing etc. complete.

82.00 Sqm. 40 Providing and fixing machine cut mirror polished 4535.91 four thousand five hundred Sqm.

18mm thick Granite for jams and sills on 10mm thirty-five rupees and ninety-

thick cement plaster mortar 1:3 (1-Cement : 3- one paise

Coarse sand) and jointed with grey or coloured

cement including rubbing and mirror polishing etc.

complete. With selve piece as per required length

927.00 Sqm. 41 Providing 10mm thick cement plaster in single 178.45 one hundred seventy-eight Sqm.

coat on ceilling for interior plastering up to floor rupees and forty-five paise

two level finished even and smooth in cement

mortar 1:3 (1-cement:3sand) etc. for all floors.

13.00 Sqm. 42 Providing 15mm thick cement plaster in single 260.45 two hundred sixty rupees and Sqm.

coat on Walls for interior plastering up to floor two forty-five paise

level finished even and smooth in cement mortar

1:4 (1-cement:4sand)with a floating coat of neat

34.00 Rmt. 43 Providing cement vata 10x10 cm size quarter 24.28 twenty-four rupees and Rmt.

round in cement mortar 1:1 including neat cement twenty-eight paise

finishing watering etc. comp.

2125.00 Sqm. 44 Providing 15mm thick cement plaster in single 172.62 one hundred seventy-two Sqm.

coat on brick concrete Walls for interior plastering rupees and sixty-two paise

up to floor two level finished even and smooth in

cement mortar 1:4 (1-cement:4sand) etc.

complete for all floors

2241.00 Sqm. 45 20mm thick sand faced cement plaster on walls 323.21 three hundred twenty-three Sqm.

up to all height above ground level. Consisting of rupees and twenty-one paise

12 mm thick backing coat of Cement Mortar 1:3 (1-

cment:3-sand) and 8MM thick finishing coat of

Cement Mortar 1:1 (1-Cement: 1-Sand) etc.

15000.00 Ltr. 46 Providing & fixing Sintex P.V.C. water tank of ISI 3.95 three rupees and ninety-five Ltr.

Standard and approved quality and bound with paise

outlet and inlet G.I. fitting of required size etc.

3052.00 Sqm. 47 Applying two coats of Birla or Asian Acrylic lappy 40.59 forty rupees and fifty-nine Sqm.

and two coats of primer of approved brand and paise

manufacture on new wall surface to give an even

shade including throughly brushing the surface

free from mortar dropping and other foregin

matter and sand papered smooth.

927.00 Sqm. 48 Distempering (three coats) with oil bound 122.46 one hundred twenty-two Sqm.

distemper of approved brand and manufacture rupees and forty-six paise

and of reuired shade to Ceilling to give an even

shade, over and including a priming coat with

distemper primer approved brand and

manufacture after thoroughly brooming the

surface free from mortar dropping and other

foreign matter and also including preparing the

surface even and sand papered smooth.

2125.00 Sqm. 49 Distempering (three coats) with oil bound 110.48 one hundred ten rupees and Sqm.

distemper of approved brand and manufacture forty-eight paise

and of reuired shade on wall surfaces to give an

even shade, over and including a priming coat

with distemper primer approved brand and

manufacture after thoroughly brooming the

surface free from mortar dropping and other

foreign matter and also including preparing the

surface even and sand papered smooth.

2241.00 Sqm. 50 Finishing Wall with Weather Proof Exterior 122.14 one hundred twenty-two Sqm.

Emulsion Paint on Wall Surface(TwoCoats)to give rupees and fourteen paise

an required shape even shade after thoroguhly

brushing the surface to remove all dirt,and

remains of loose powdered materials etc.

7.00 Nos. 51 Providing & fixing wash basin with single hole for 2274.52 two thousand two hundred Nos.

pilar tap with C.I. or M.S. brackets painted white seventy-four rupees and fifty-

including cutting holes arid making goods the two paise

same including 40mm dia. C.P. brass waste and

waste pipes union and bottle trap including 15mm

dia. pillar tap & stop tap vitreous china flat back

wash basin 550mm x 400mm size in white

14.00 Nos. 52 Providing and fixing flat back Urinal of 430 x 260 1399.86 one thousand three hundred Nos.

x 350mm size white colour with 15mm dia. ninety-nine rupees and eighty-

conseal stop cock, pillaar tap including necessary six paise

waste pipe, coupling & fittting all labour and

6.00 Nos. 53 Providing and fixing water closet squatting pan 1844.26 one thousand eight hundred Nos.

(Indian type w.c. pan) size 580mm (Earthwork, forty-four rupees and twenty-

bed concrete, foot rest and trap to be measured six paise

and paid for separately) including P or S trap

100mm dia. with 25mm dia. flush valve, G.I. inlet

connection, 15mm dia. bib tap etc. complete

viterous china Long pattern white colour.

9.00 Nos. 54 Providing and fixing PVC SWR Nahni trap for 588.26 five hundred eighty-eight Nos.

drain 75 mm diameter with jali of the following rupees and twenty-six paise

nominal diameter of self cleansing design with C.I.

scread down or hinged grating including the cost

of cutting and making good the walls.

8.00 Nos. 55 Providing and fixing 40mm dia. gun metal check 663.43 six hundred sixty-three Nos.

or non return fullway wheel valve. rupees and forty-three paise

8.00 Nos. 56 Providing and fixing 25mm dia. gun metal check 420.63 four hundred twenty rupees Nos.

or non return fullway wheel valve. and sixty-three paise

11.00 Nos. 57 Providing and fixing screw down 15mm dia. bib 186.83 one hundred eighty-six Nos.

taps of brass chromium plated screw down bib tap rupees and eighty-three

9.00 Nos. 58 Provinding and fixing 600mm x 450mm bevelled 859.41 eight hundred fifty-nine Nos.

edge mirror of superior glass mounted on 6mm rupees and forty-one paise

thick AC sheet or plywood sheet and fixed to

wooden plugs with CP brass screws and washer.

9.00 Nos. 59 Providing and fixing S.W. gully trap with C.I. 1292.19 one thousand two hundred Nos.

grating brick masonry chamber and water tight ninety-two rupees and

C.I. Cover with frame of 300mm x 300mm size nineteen paise

(Inside) with standard weight.(i) Square mouth

traps. (A) 100mm x 100mm soze P type.

34.00 Rmt. 60 Providing, laying and jointing in true line and level 72.65 seventy-two rupees and sixty-Rmt.

15MM dia. U.P.V.C. pipe (SCH-40) line including five paise

fitting of PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent or as approved by

Engineer-in-charge. Pipe shall be fixed on the wall

with help of clamp at every two meter c/c or shall

be concealed as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

33.00 Rmt. 61 Providing, laying and jointing in true line and level 91.84 ninety-one rupees and eighty-Rmt.

25MM dia. U.P.V.C. pipe (SCH-40) line including four paise

fitting of PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent or as approved by

Engineer-in-charge. Pipe shall be fixed on the wall

with help of clamp at every two meter c/c or shall

be concealed as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

75.00 Rmt. 62 Providing, laying and jointing in true line and level 148.12 one hundred forty-eight Rmt.

40Mm dia. U.P.V.C. pipe (SCH-40) line including rupees and twelve paise

fitting of PRINCE / SUPREME / ASTRAL /

FINOLEX or equivalent or as approved by

Engineer-in-charge. Pipe shall be fixed on the wall

with help of clamp at every two meter c/c or shall

be concealed as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials.

149.00 Rmt. 63 Providing,laying and jointing in true line and level 897.79 eight hundred ninety-seven Rmt.

110MM Dia. U.P.V.C.SWR type B-Pipe rupees and seventy-nine

conforming to IS13592-1992 with one end plain paise

and other end socketed with rubbering & fitting

conforming to IS:14735-1999 of approved make

for drainage system pipeline,pipe shall be jointed

with each other with rubber lubricant,pipe shall be

fixed on wall using of PVC clamp of the

size160mm diameter x 210mm length x196mm

high atevery 2000mm center to center or shall be

concealed in walls as directed including

necessary fittings such as

bends,shoesetc.including testing of pies and joints

and jointed with adhesive solvent cement

including cost of all materials.

5.00 Nos. 64 Providing and fixing in position 100mm Dia. 180.77 one hundred eighty rupees Nos.

P.V.C. cowel vent to pipes 100mm dia. and seventy-seven paise

36.00 Rmt. 65 Providing and fixing hand railing by providing 2292.70 two thousand two hundred Rmt.

vertical support of 32mm dia. Stain less steel pipe ninety-two rupees and

on top 50mm dia. Stainless steel pipe rail incl. seventy paise

bending welding and fixing in R.C.C. parapet as

3.00 Rmt. 66 Supplying, fabricating and erecting M.S. stair case 4155.14 four thousand one hundred Rmt.

with hand railing 1.0 Mt. high having frame of M.S. fifty-five rupees and fourteen

angle 25x25x5MM with 25x5MM M.S. flat welded paise

horizontally with angle in treads of the stair to be

welded with aligned M.S. angle used as waist of

slab all together with vertical post & top rail of

M.S. pipe on 50MM dia. inclduing applying one

coat of red oxide and two coats of color as

directed by the engineer-in-charge with cost of

welding, cutting, bending, erecting the stair case

in position etc. complete.(R.A.)

1.00 Rmt. 67 Providing and Laying Controlled C.C. M-200 with 6854.87 six thousand eight hundred Rmt.

curing etc. complete including the cost of fifty-four rupees and eighty-

formwork but excl. the cost of reinforcement for seven paise

R.C.C. work in Slab.(R.A.)

80.00 Rmt. 68 Providing TMT Bar FE 500D reinforcement for 77.29 seventy-seven rupees and Rmt.

R.C.C. work including bending, binding and twenty-nine paise

placing in position complete upto floor two level.

12.00 Rmt. 69 Providing & Fixing Kota slab polished Kota 20 to 648.42 six hundred forty-eight Rmt.

25mm (Avg.) thick of approved quality full rupees and forty-two paise

moulded round front edge fixed in wall inclu.

making groove in wall & finished the same in

cement mortar 1:2 (1-Cement : 2-sand) for

partition in urinals and filling the joints with grey or

colour cement slurry in including rubbing and

polishing etc. complete. (R.A.)

326.00 Sqm. 70 Providing and fixing Gyproc Brand suspended 1380.67 one thousand three hundred Sqm.

false ceilling of fiber reinfoced sound proof eighty rupees and sixty-

perforated sheet of 12 to 19 mm thick incl. puff seven paise

panel with glass wool, etc. complete as required

work as per detail and drawing having alluminium

framing of 60MM x 60MM or as per the size of

perforated sheet supported by frame work as

press formed elements made from 24 gauge thick

G.I. sheet consisting "C" section runners of size

30 x 50 x 30 mm at 0.90mt center to center or

closer at necessary to derive required shape of

ceilling cross furring channel of size 70 x 10 mm

fixed to "C" runner at 0.45mt centre to centre or

closer as it is necessary by C.I. "L" angle of size

19 x 19 mm of 6 mm dia. M.S. bars to the ceilling

at 0.90 mt. etc. or closer as necessary the whole

work carried out as directed.(R.A.)

110.00 Pt. 71 Point wiring for Light / Bell with 2-1.5 sq.mm & 449.45 four hundred forty-nine Pt.

earthwire of 1.5 sq.mm (Green) both are of ISI rupees and forty-five paise

marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe

to be erected concealed in/ on surface on

wall/celing complete with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic box,

single mounting base frame covered with

textured/metallic front plate modules erected on /

in wall / ceiling as per pipe erected,with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe

and accessories Cat. III

62.00 Pt. 72 Point wiring for FAN with 2-1.5 sq.mm & 638.32 six hundred thirty-eight Pt.

earthwire of 1.5 sq.mm (Green) both are of .ISI rupees and thirty-two paise

marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe

to be erected concealed in / flushed on wall/celing

complete with 6A Modular type switch and hum

free EME four or more step type electronic fan

regulator with separately mounted and

accessories with earth continuity of following type

erected on PVC / Metallic box, single mounting

base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per

pipe erected.with necessary ceiling rose /

H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories Cat. III

22.00 Pt. 73 Point wiring for on board looped PLUG with tissino 66.66 sixty-six rupees and sixty-six Pt.

type single pole ISI marked Switch and Socket paise

erected with necessary connections erected on

wooden /Metal/ PVC Box covered with 3 mm

thick PC(Polycarbonate) /Acrylic sheet for open /

concealed wiring for following size.[A] For 6 Amp.

22.00 Pt. 74 [II] 16A Plug with 2-2.5 sq.mm Cu. Mains(a) with 163.62 one hundred sixty-three Pt.

medium class Rigid PVC pipe and accessories rupees and sixty-two paise

3.00 Pt. 75 Point wiring for Two Way Controlled Light Point 567.62 five hundred sixty-seven Pt.

with 2-1.5 sq.mm & earthwire of 1.5 sq.mm rupees and sixty-two paise

(green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in /

flushed on wall/ceiling ,complete with 6A Modular

type switches and following type of accessories

erected on PVC / Metallic box, single mounting

base frame covered with textured / metallic front

plate modules erected on / in wall / ceiling as per

pipe erected. with necessary batten/angle holder

or ceiling rose or H.D.Connector as directed. (a)

with medium class Rigid PVC pipe and

accessories Cat. III

350.00 No. 76 Providing and erecting ISI mark Medium class 33.33 thirty-three rupees and thirty- No.

RIGID PVC PIPES of following size complete to three paise

be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following dia

of pipes, in approved manner as directed (b)

600.00 Mtr. 77 Mains with 1.1 KV grade FRLS PVC insulated ISI 111.10 one hundred eleven rupees Mtr.

marked stranded Copper conductor wire in and ten paise

existing pipe erected with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following

size(a) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm for AC mains.

400.00 Mtr. 78 Providing and erecting Mains with 1.1 KV grade 82.82 eighty-two rupees and eighty- Mtr.

FRLS PVC insulated ISI marked stranded Copper two paise

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size for lighting mains (A)

With medium class Rigid PVC pipe and

42.00 Mtr. 79 Providing & erecting 240 V MCB double pole 299.97 two hundred ninety-nine Mtr.

switch for motor & inductive load (C Curve) rupees and ninety-seven

having 10 KA breaking capacity & confirms to IS : paise

8828 in existing box having following capacity for

lighting & AC Mains (A) 6 to 32 Amp. Cat III

4.00 Mtr. 80 Providing & erecting 415 V MCB Four Pole for 595.90 five hundred ninety-five Mtr.

Motor & Inductive Load (C Curve) having 10KA rupees and ninety paise

breaking capacity & confirms to IS :8828 in

existing box having following capacity Cat.III

4.00 Mtr. 81 Providing & erecting 415 V MCB Four Pole for 737.30 seven hundred thirty-seven Mtr.

Motor & Inductive Load (C Curve) having 10KA rupees and thirty paise

breaking capacity & confirms to IS :8828 in

existing box having following capacity Cat.III

1.00 Mtr. 82 Supplying and erecting tripple pole & neutral 440V 1961.42 one thousand nine hundred Mtr.

/ 500V panel mounting Copper Busbars with four sixty-one rupees and forty-

equal Nos. of electrolyte bus having current two paise

density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wraped with

colour insulating tape for phase sequence of

following current carrying capacity, erected with

necessary bus bar supports /insulators, main

cable socket to each bar, erected in existing

cubical panel with necessary connections.(A)

Suitable for 100 Amp. Capacity

1.00 No. 83 Providing and erecting Approved make Four pole 6173.12 six thousand one hundred No.

moulded case circuit breaker having breaking seventy-three rupees and

capacity ICU of 25 KA. at 415 V,having normal twelve paise

current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

2.00 No. 84 Providing and erecting Sheet Steel powder coated 6497.33 six thousand four hundred No.

Vertical MCB distribution board (VTPN) - flush / ninety-seven rupees and

surface mounted double door (IP54) fitted with thirty-three paise

copper insulated busbar, isolated neutral bar,

earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3, suitable for 63/100 AMP TPN

MCCB + RCCB as incomer and three phase

outgoing as per following .(The DBs should be

used of same company of MCB to be used) (B)6

1.00 No. 85 Providing and erecting Sheet Steel powder coated 5817.60 five thousand eight hundred No.

Vertical MCB distribution board (VTPN) - flush / seventeen rupees and sixty

surface mounted double door (IP54) fitted with copper paise

insulated busbar, isolated neutral bar, earth bar and

DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

suitable for 63/100 AMP TPN MCCB + RCCB as

incomer and three phase outgoing as per following

.(The DBs should be used of same company of MCB

to be used) (A)4 way outgoing

2.00 No. 86 Providing and erecting Sheet Steel powder coated 10965.57 ten thousand nine hundred No.

Vertical MCB distribution board (VTPN) - flush / sixty-five rupees and fifty-

surface mounted double door (IP54) fitted with copper seven paise

insulated busbar, isolated neutral bar, earth bar and

DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

suitable for 63/100 AMP TPN MCCB + RCCB as

incomer and three phase outgoing as per following

.(The DBs should be used of same company of MCB

to be used) (D)12 way outgoing

3.00 Rmt. 87 Providing and erecting Approved make RCCBs 3040.10 three thousand forty rupees Rmt.

conforming to IS: 12640 and having sensitivity of 30 and ten paise

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate

any electronic component for following Max. rating

erected as directed.(ii)63Amps. FP Cat-III

1.00 No. 88 Providing and erecting Approved make Four pole 4314.72 four thousand three hundred No.

moulded case circuit breaker having breaking capacity fourteen rupees and seventy-

ICU of 25 KA. at 415 V,having normal current rating up two paise

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. (ii)100Amps. FP

5.00 No. 89 Providing and erecting Annealed bare Copper 760.53 seven hundred sixty rupees No.

wire 8 to 16 S.W.G. and fifty-three paise

2.00 No. 90 Supplying & erecting earth pit of minimum bore 8636.51 eight thousand six hundred No.

dia.150mm size approved make Earthing Electrode thirty-six rupees and fifty-one

consisting Pipe-in-Pipe Technology as per IS 3043- paise

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has

to submit test certificate including value of earth

resistance of installation duly stamped and signed by

agency and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test report

must be submitted by Agency.(c) For Electrical

Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent

Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

30.00 No. 91 Supplying & erecting XLPE(IS:7098)(I)-88 ISI 728.21 seven hundred twenty-eight No.

unarmoured copper cable 1.1 KV grade to be rupees and twenty-one paise

erected as directed of following size.(N) 4 core

60.00 Kg. 92 providing and erecting Mains with 1.1 KV grade 180.79 one hundred eighty rupees Kg.

FRLS PVC insulated ISI marked stranded Copper and seventy-nine paise

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (g) 4 wire 4 sq. mm lighting mains

80.00 No. 93 providing and erecting Mains with 1.1 KV grade 398.95 one hundred eighty rupees No.

FRLS PVC insulated ISI marked stranded Copper and seventy-nine paise

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (g) 4 wire 10 sq. mm A.C. mains 2-

30.00 Sqm. 94 Providing & laying. Double walled corrugated 62.62 sixty-two rupees and sixty- Sqm.

pipes (DWC) of polyethylene(conforming to IS two paise

14930 II )with necessary connecting accessories

of same material at required depth for laying of

cable. below ground / road surface for enclosing

cable and back filling the same to make ground as

per original.(A)50 mm dia

62.00 Kg. 95 Providing & erecting Approved make Power 1948.29 one thousand nine hundred Kg.

Saving 50 Watt Ceiling Fan with double ball forty-eight rupees and twenty-

bearing ISI mark with Condenser 230 volt A.C. nine paise

50 Hz 1200 mm sweep complete having 3blades

with aluminium blades with , canopy & 30 cms.

down rod erected with 24/ 0.2, 3 core flexible wire

with earthing.(Havells, Orient, Crompton, Anchor,

46.00 Mtr. 96 Supplying & erecting fan hook box of 10 mm 108.07 one hundred eight rupees Mtr.

M.S. round bar bounded to the RCC bars up to and seven paise

50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary

64.00 Mtr. 97 Providing 2.5mm.thick laminated acrylic sheet to 18.18 eighteen rupees and Mtr.

cover the fan hook or Fan box. eighteen paise

2.00 Mtr. 98 Providing & erecting fresh air fan 250 mm dia with 1559.44 one thousand five hundred Mtr.

square frame make of ABS body with louvers Cat. fifty-nine rupees and forty-

2.00 Mtr. 99 Providing and erecting AC-3 duty 4 pole A.C. Coil 4793.46 four thousand seven hundred Mtr.

with 2 NO & 2 NC aux contacts complete with ninety-three rupees and forty-

415V/220V operating coil suitable for (L&T, six paise

BCH,T.C., Siemens, C&S make).(b) for 40 A

12.00 Mtr. 100 Supplying and erecting led lamps with following 188.87 one hundred eighty-eight Mtr.

wattage capacity of 220 to 240 voltage, minimum rupees and eighty-seven

15000 burning hours life, 500 V in built-surge paise

protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

0.5 (iii) 10 to 15 watts Cat-III

1.00 No. 101 Providing & erecting open well horizontal mono 18746.61 eighteen thousand seven No.

block pump set with cast iron body, complete for hundred forty-six rupees and

three phase submersible motor having [D] For 5 sixty-one paise

HP 3 phase open well horizontal mono block

pump set suitable for 1350 LPM to 310 LPM @

to 42 Mtr head suitable for 50/65 mm dia delivery

1.00 Mtr. 102 Supplying & erecting approved make motor 7486.12 seven thousand four hundred Mtr.

control cubical panel (Direct - on - line) made from eighty-six rupees and twelve

16 G. CRCA sheet duly epoxy powder painted paise

inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON-

OFF isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R- Y - B

phases, overload relay, Automatic water level

controller, Ammeter, Voltmeter each with two way

selector switch incoming, wires duly socket

crimped, main contactor & overload relay, start -

stop push buttons, to be erected on angle iron

frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T,

Siemens or BCH make only. (a) DOL up to

100.00 No. 103 Providing and erecting ISI marked PVC insulated 146.45 one hundred forty-six rupees No.

PVC Sheathed Flat flexible Submersible copper and forty-five paise

cable approved make of following Size. (c)

Core x 4 Sq. mm

70.00 No. 104 Supplying and erecting LED indoor fittings with 295.93 two hundred ninety-five No.

LEDs of wattage 0.2 Watt to 0.5 Watt assembled rupees and ninety-three

on single MCPCB, with housing used as a heat paise

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)II

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional

12.00 No. 105 Supplying and erecting LED indoor fittings with 242.40 two hundred forty-two rupees No.

LEDs of wattage 0.2 Watt to 0.5 Watt assembled and forty paise

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)II

(B) LED Lamps integral type, cool white with PC

diffuser suitable for B-22 LAMP holder. (b) 5 to

40.00 No. 106 Supplying and erecting LED indoor fittings with 1794.77 one thousand seven hundred No.

LEDs of wattage 0.2 Watt to 0.5 Watt assembled ninety-four rupees and

on single MCPCB, with housing used as a heat seventy-seven paise

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (B)

LED Panel Light with provision for Plane front

frame with translucent cover fixed to housing

complete.IP20 (vi) 36 watts, 24" x 24", Surge-

8.00 No. 107 Supplying and erecting LED indoor fittings with 3886.48 three thousand eight hundred No.

LEDs of wattage 0.2 Watt to 0.5 Watt assembled eighty-six rupees and forty-

on single MCPCB, with housing used as a heat eight paise

sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium

casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD <

%,CCT 3000 K to 6500K,Luminaire efficacy>

lumens/watt ,LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the

ranges shown.)(D) LED Panel light with provision

for Plane front frame with translucent cover fixed

to housing complete.(f) up to 36w

20.00 No. 108 Supplying & erecting recess wall mounting 591.86 five hundred ninety-one No.

speaker with 5W rated input power 3.3 K. Ohms / rupees and eighty-six paise

3W impedance, 100 - 10000 Hz frequency

response with 6 inch dia. cone type 8 ohms

speakers duly fitted in ABS plastic cabinet of

colour match with wall or ceiling of following size.

[[Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ](b)Square shaped

260 x 260mm size speaker

4.00 No. 109 Supplying , installing & testing approved make 2654.28 two thousand six hundred No.

Microphone for Speech, Music, & Close to lip fifty-four rupees and twenty-

singing with inbuilt protection against breath & eight paise

wind noise with capability to capture sound from

long distance & wide area with frequency

response 50 - 16000 Hz, having sensitivity 1.8mv

/ Pa & impedance 430 ohms(Lo -Z) supplied with

quick detachable holder, 6 Mtr long. Twin core

cable & 3 pin XLR connector. [[Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ]

240.00 Set. 110 Supplying and erecting Flexible PVC insulated 31.31 thirty-one rupees and thirty- Set.

multi strand multi core 1.1 kv grade ISI marked one paise

copper wires of following size to be erected as

directed.(d) 1.50 Sq.mm 2 core round PVC

1.00 No. 111 Supplying & erecting Amplifier having following 11298.87 eleven thousand two No.

specification: hundred ninety-eight rupees

Power Output :250W (RMS) (300W Max.) and eighty-seven paise

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays

The amplifier suitable to operate 240V A.C.&

24volt D.C. (Battery) with automatic changeover

from AC to Battery operation, duly protected by

wrong Battery Polarity connections. [[Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ]

15.00 No. 112 Providing and erecting Inverter based approved 56353.96 fifty-six thousand three No.

make split air-conditioning unit consisting of hundred fifty-three rupees

condensing unit with variable speed fan motor, and ninety-six paise

inverter type hermetically sealed rotary

compressor with accessories etc. duly connected

separately erected evaporating unit and blower

motor with its accessories by means of extra

supplied proper insulated copper tubing,drain

PVC pipes suitable for ( cost includes Eco

Friendly green gas charging and 15A plug top &

Remote Control & MS Stand) with necessary core

cutting.(1)For ISEER Range (KWH/KWH)(3.1 to

3.99)(C) for 1.7 to 2 ton capacity - Premium Cat.

15.00 Mtr. 113 Supplying & installing MS standard type stand 965.56 nine hundred sixty-five Mtr.

mounting for outdoor unit of Split A.C. upto 4 TR rupees and fifty-six paise

capacity erected with necessary hardware

materials as directed.

15.00 No. 114 Supplying and installing MS angle , powder 1361.48 one thousand three hundred No.

coated / Painted standard type of wall/floor stand sixty-one rupees and forty-

mount for outdoor unit of split AC of following eight paise

capacity, erected with necessary hardware

materials as directed.

80.00 No. 115 Supply, Installation, testing and commissioning 370.67 three hundred seventy No.

including vaccumiazation and Nitrogen testing of rupees and sixty-seven paise

following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with

fittings, with suitable adjustable ring type hanger

supports, jointing/brazing including accessories,

insulated with XPLE Class-0 tubular

insulation/with Class-0 closed cell elastometric

nitrile rubber tubular sleeves sections of specified

thickness as given below for Suction and Liquid

lines, all accessories as per specifications etc with

necessary refrigerant joint as required :(B) 9.5 mm

dia (OD) (Soft drawn) with tube thickness 1.2 mm

with 19 mm thick insulation

80.00 No. 116 Supply, Installation, testing and commissioning 664.58 six hundred sixty-four rupees No.

including vaccumiazation and Nitrogen testing of and fifty-eight paise

following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV system, complete with

fittings, with suitable adjustable ring type hanger

supports, jointing/brazing including accessories,

insulated with XPLE Class-0 tubular

insulation/with Class-0 closed cell elastometric

nitrile rubber tubular sleeves sections of specified

thickness as given below for Suction and Liquid

lines, all accessories as per specifications etc with

necessary refrigerant joint as required :(D)

mm dia (OD) (Soft drawn) with tube thickness

mm with 19 mm thick insulation.

400.00 No. 117 Supplying & erecting XLPE(IS:7098)(I)-88 ISI 137.36 one hundred thirty-seven No.

unarmoured copper cable 1.1 KV grade to be rupees and thirty-six paise

erected as directed of following size. For A.C.

1.00 Nos. 118 FIRE PUMP ROOM EQUIPMENT Supply, 140137.50 one hundred forty thousand Nos.

erection, testing & commissioning of electrical one hundred thirty-seven

motor driven MAIN PUMP of horizontal centrifugal rupees and fifty paise

end suction back pull out type capable to deliver

900 LPM at 37 MWC.The pump shall be coupled

to TEFC motor with speed of 2900 RPM and

2.00 Nos. 119 FIRE ALARM SYSTEM (CONVENTIONAL): SITC 4848.00 four thousand eight hundred Nos.

of 10 Zone Conventional Fire Alarm Comtrol forty-eight rupees

Panel With Battery backup and Manual Call Point

and Sounder on Each Floor with Cabling and

Required Accessorise.

29.00 Rmt. 120 Supplying, installing, testing and commissioning 1111.00 one thousand one hundred Rmt.

of M.S. PIPES 'C' class confirming to IS 1239, eleven rupees

with specials such as Tees, elbows, flanges.

Including cutting, Welding, fixing in underground

installation with anti corrosive wrpping & coating

100 mm Dia. Pipe

96.00 Rmt. 121 Supplying, installing, testing and commissioning 838.30 eight hundred thirty-eight Rmt.

of M.S. PIPES 'C' class confirming to IS 1239, rupees and thirty paise

with specials such as Tees, elbows, flanges.

Including cutting, Welding, fixing in underground

installation with anti corrosive wrpping & coating

80 mm Dia. Pipe

495.00 Rmt. 122 Supplying, installing, testing and commissioning 1212.00 one thousand two hundred Rmt.

of M.S. PIPES 'C' class confirming to IS 1239, twelve rupees

with specials such as Tees, elbows, flanges.

Including cutting, Welding, fixing in underground

installation with anti corrosive wrpping & coating

For fire branch pipe of 40MM pipe

5.00 Sqm. 123 Supplying and PAINTING the exposed M.S. pipes 5267.28 five thousand two hundred Sqm.

with one coat of Zinc Chromite primer with two sixty-seven rupees and

coats of synthetic enamel paint of approved twenty-eight paise

colour / shade.

2.00 Nos. 124 Supplying, installing, testing and commissioning 1464.50 one thousand four hundred Nos.

of C.I. CHECK VALVES as per API stds., swing sixty-four rupees and fifty

check type with required flanges, nuts, bolts and paise

gaskets etc. complete.

100 mm nominal dia

2.00 Nos. 125 Supplying, Installing, testing and commissioning 1001.58 one thousand one rupees Nos.

CI BUTTERFLY VALVES slim seal standared and fifty-eight paise

lever operated type confirming to IS Standard with

required flanges, nuts, bolts etc. complete.

2.00 Nos. 126 Supplying, installing and commissioning of FIRE 5858.00 five thousand eight hundred Nos.

BRIGADE INLET connection of 4 way with 4 nos. fifty-eight rupees

63 mm dia. . Pipe manifold and connected to wet

23.00 Rmt. 127 FIRE EXIT SIGNAGES Supply, Installation, 6060.00 six thousand sixty rupees Rmt.

Testing & Commissioning of Fire Exit Sineges

With Arrow. 4" X 12" (M.R.)

6.00 Nos. 128 Single headed oblique type hydrant valve as per 3636.00 three thousand six hundred Nos.

IS 5290, of gunmetal construction with 80mm dia thirty-six rupees

flanged inlet drilled as per IS : 1538, outlet of

mm dia female instantaneous cupling with spring

lock, gunmetal blank cap with MS galvanized

chain and CI hand wheel. The hydrant valve shall

12.00 Nos. 129 15Mtr long, 63mm dia RRL hose conforming to IS 5858.00 five thousand eight hundred Nos.

: 636 Type A with instantaneuos male / female fifty-eight rupees

gun metal couplings conforming to IS : 903. The

hoses shall be ISI marked.

20.00 Nos. 130 Gun metal 63mm dia short branch pipe with 3636.00 three thousand six hundred Nos.

nozzle of 19mm dia conforming to IS : 903. The thirty-six rupees

branch pipe shall be ISI marked.

12.00 Nos. 131 First-aid hose reel swinging type with aluminium 5858.00 five thousand eight hundred Nos.

die-cast, red epoxy polyester powder coated drum fifty-eight rupees

containing 19mm dia, 40Mtr length rubber braided

hose. The unit shall be complete with 20mm dia

shut-off valve, jet/spray nylon nozzle ,ball balve

and wall mounting bracket with swivel arm.

12.00 Nos. 132 Supplying & erecting carbon dioxide (CO2) fire 5252.00 five thousand two hundred Nos.

extinguisher user of following capacity with fifty-two rupees

necessary user of following clamps made from

x 6 mm M.S Flat with nut & Bolts grouted in wall

complete. [A] For 4.5 Kg Capacity

1.00 Nos. 133 COMMON PUMP CONTROL PANEL Fabricating 3838.00 three thousand eight hundred Nos.

& Supply, installing, testing and commissioning of thirty-eight rupees

compartmentalised common control panel for

Electrical motor driven pumps and Diesel engine

driven pumps INCOMING 1 no. 210 A TPN

MCCB. 1 Set of 210 Amps. TPN Al. Bus bars with

colour coded heat shrinkable PVC sleeves. 1 Set

of RYB indicating lamps with individual HRC

control fuses. 1 No. Ammeter with selector

selector switch and suitable rated current

transformers. 1 No. Voltmeter with selector switch.

OUTGOING Feeder for main pump -1 No. 100 A

TPN MCCB with back up fuses Star Delta starter

with over load relay, single phase preventor and

indicating lamps with ON / OFF push buttons.

Feeder for pump -1 No.32 A TPN MCCB with

back up fuses DOL starter with over load relay,

single phase preventor and indicating lamps with

ON / OFF push buttons. -1 No. Automanual

selector switch All the components shall be

housed in a common cubical made of 16 swg.

M.S. sheet with required stiffners ( if required).

The panel will be powder coated of approved

colour both inside & out side. The panel shall

have both bottom & top cable entry provision

60.00 Nos. 134 Supplying, fabricating, STRUCTURAL STEEL 17.12 seventeen rupees and twelve Nos.

SUPPORTS such as MS channels, angles, flats, paise

rods as required at site with anchor fasteners,

clamps, threaded rods, nuts, bolts, washers etc.

complete with painting.

TOTAL COST OF CIVIL WORK RS.

Signature of Contractor P.M.C.

KALAVAD MUNICIPALITY

MUNICIPAL ENGINEER CHIEF OFFICER

KALAVAD MUNICIPALITY KALAVAD MUNICIPALITY

KALAVAD KALAVAD

1) All work shall be carried out as per Public Works Department Hand Book, I.S. Specification and other specification of the

Division or as Directed.

2) All the columns in Schedule should be filled in INK and the total of the entries in the last column should be struck out by the

Contractor under his Signature.

3) Rates quated include clearance of site (Prior to commencement of work and its close) in all respect and hold good for work

under all conditions, site, moisture weather etc.

4) The Contractor shall exhibit the board at site of work with the details of works, Tender amount and specification as per Govt.

Circular No. BBG/3277/1657/N, Dt. 26-4-78 and as per G.R. No. TNC-1090-24-C, Dt. 18-11-91, as directed by Engineer-in-

Charge of the works, exhibit board at site of the work, for which contractor is not entitled for any extra payment.

5) Contractor shall even "NIL" percentage, if no deduction is offered.

6) One percent of work done amount of this work shall be recovered from the contractor payment as “Labor Cess” in terms of the

Gujarat Govt. gazette extra ordinary dt. 12/12/2004 implementation of building and other construction works.(Regulation of

employment & condition of service act 1996)

7) Testing of materials shall be as per statement attached for quality control. The material shall be tested in GERI bill for the

testing charge shall be paid by the Department and 1% (One percent) of amount put to tenedr after deduction of cost of

material as per schadele - A shall be recovered from the Contractor's running Bill as per GR of R&B Dept. No. TNC/1085/4/C

Dt: 20-12-91 & modified R&B Dept. circular No. SSR/10000092-IB-12910-C Dt:16-10-95.

8) For R.C.C. item where there is change of grade mix or change as per actual mix design . The difference of cement

consumption shall be added /deducted from rate of original item of the rat of star rate mentioned in the tender.

Signature of Contractor P.M.C.

KALAVAD MUNICIPALITY

MUNICIPAL ENGINEER CHIEF OFFICER

KALAVAD MUNICIPALITY KALAVAD MUNICIPALITY

KALAVAD KALAVAD