Repair of Hatchery, Feed store and Mortality/ Disposal Pit at Poultry Project IPDP Mattan

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Providing and Fixing plain water proof/Fire resistant Ply wood for ceiling of variours rooms at Hattchery section inclcuding frame work whhere ever neccssery. (Marine Grade) vigwam or equivalent with certification.

Earth work in excavation by manual foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50M from edge of cutting

Providing and laying Soling including compacting, watering including all carriages of material complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 aggregate excluding carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing and laying in position specified grade Rienforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement all work up to all levels 1:1.5:3 (1 cement: 2 coarse sand: 4 ) crushed excluding carriages of material

Centering and shuttering including strutting propping etc. and removal of form work.

Rienforcement for RCC works including bending, cutting all complete and carriage upto site complete.

12mm thick cement plaster 1:4(1 cement :4coarse sand) finishedexcluding carriages upto site of work

Dry random rubble masonry with hard stone in foundation and plinth (with bond stones)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 60 x 60 CM size with spacers all complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete with spacers to be decided by incharge Engineer

Providing and applying white cement based putty of average thickness 2 mm of approved brand and manufacture.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 16 MM Thick (Area of slab over 0.5 sqm)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 32mm OD(SDR-7.4)

PN-16 pipe , 25mm OD(SDR-7.4)

External work including trenching, refilling etc PN-16 pipe , 25mm OD (SDR-7.4)

Providing and fixing PPR Union 32mm

Providing and fixing PPR Union 25mm

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with padestal all complete.

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: Range of three squatting plates with 10 liter P.V.C. automatic flushing cistern

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040mm bowl depth 250mm

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia of jaquar or equivalent make

Providing and fixing CP Brass Single lever sink mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia of jaquar or equivalent make

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete 40 mm flexible pipe

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with fittings and the base support for tank

Providing and Fixing Gyser of 50 ltr capicity of standard quality like Havells Venus etc

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 of jaquar or equivalent make

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.of jaquar or equivalent make

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 of jaquar or equivalent make

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 of jaquar or equivalent make

PVC WASTE FITTINGS ( For external use excavation and refelling of earth is included) PRINCE B TYPE OR EQUIVALENT A) PVC Pipe of 100mmdia

B) PVC Pipe of 75 mm dia

C) PVC Door bends 100MM

D) PVC Reducers

E) PVC Door Tees

F) PVC caps 3''

G) Floor trap 3''

H) floor trap 4''

I) Pvc Connection

J) PVC Door bends 75 MM

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar

Providing woodwork of 2nd class kail wood in frames of doors , windows, clestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fasteners to be paid separately)

Providing and fixing glazed shutters for doors , windows and clerestory windows using 10 kg/sqm ( 4 mm thick) float glass panes including ISI marked M.S. pressed butt hinges bright finished or required size with necessary screws 35 mm thick in second class kail wood.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supply, Installation, Testing and Commissioning of 3 star rating 1.5 Ton Inverter type (Hot and Cold) split Air Conditioner suitable for operation on AC supply single phase 50Hz 230V with hermetically sealed inverter compressor with air cooled condenser latest R410A/ R-32 refrigerant fan motor, start and run capacitors, relay and over load protector internal unit with one indoor and one outdoor unit. The indoor unit fitted on wall by employing suitable clamps and the outdoor unit will be placed on angle iron stand fitted with nut/bolts outside the room to avoid noise, including standard length of suitable size copper tubing covered with nitrilic foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ PVC insulated copper cable and a battery operated wireless remote unit. The job includes repairs to walls wherever the same are cut and the AMC of AC for a period of one year from date of successful commissioning. (Panasonic/Daikin/ Godrej/LG/ Lloyd/ Voltas)Sample to be approved before installation including Supply, Installation, Testing and Commissioning of 4KVA automatic relay type Voltage Stabilizer for 1.5 ton AC operating from input voltage 90-260V thereby producing 230+-3 output voltage.sample to be approved before installation. 1.5 Ton capacity

Supply, Installation, Testing and Commissioning of 3 star rating 1.5 Ton Inverter type (Hot and Cold) split Air Conditioner suitable for operation on AC supply single phase 50Hz 230V with hermetically sealed inverter compressor with air cooled condenser latest R410A/ R-32 refrigerant fan motor, start and run capacitors, relay and over load protector internal unit with one indoor and one outdoor unit. The indoor unit fitted on wall by employing suitable clamps and the outdoor unit will be placed on angle iron stand fitted with nut/bolts outside the room to avoid noise, including standard length of suitable size copper tubing covered with nitrilic foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ PVC insulated copper cable and a battery operated wireless remote unit. The job includes repairs to walls wherever the same are cut and the AMC of AC for a period of one year from date of successful commissioning. (Panasonic/Daikin/ Godrej/LG/ Lloyd/ Voltas)Sample to be approved before installation including Supply, Installation, Testing and Commissioning of 4KVA automatic relay type Voltage Stabilizer for 1.5 ton AC operating from input voltage 90-260V thereby producing 230+-3 output voltage.sample to be approved before installation. 1.00 Ton capacity

Carriage of Material by mechnical Transport fo an average lead of 17 kms 1.SAND/AGGREGATE

2.BRICKS

MORTALITY/WASTE DISPOSAL PIT AT POULTRY PROJECT OFFICE MATTAN Earth work in excavation in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50M from edge of cutting

Providing and laying Soling including compacting, watering including all carriages of material complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 aggregate excluding carriages upto site of work

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) excluding carriages upto site of work

Providing and laying in position specified grade Rienforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement all work up to all levels 1:1.5:3 (1 cement: 2 coarse sand: 4 ) crushed excluding carriages upto site of work.

Centering and shuttering including strutting propping etc. and removal of form work.

Rienforcement for RCC works including bending, cutting all complete and carriage upto site complete.

12mm thick cement plaster 1:4(1 cement :4coarse sand) finishedexcluding carriages upto site of work

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete with spacers to be decided by incharge Engineer

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Carriage of Material by mechnical Transport fo an average lead of 17 kms 1.SAND/AGGREGATE

2.BRICKS

REPAIR OF FEED STORE AT POULTRY PROJECT OFFICE IPDP MATTAN Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.