Karnataka

To Be Opened

Works

Roads

Road Development works on Highway connecting Ahmednagar (SH-173) to B.B.Nagar Cross road (SH-220) from ch.0.00 km to 4.80 km via Sanehalli, Shettihalli, Bagur, Ailapura, Mantenahalli, Lakkenahalli, Madhure in Hosadurga Taluk, Chitradurga District

Public Works Department

PRAMC PWD Bengaluru | Bangalore, Karnataka

Amount: ₹3.9 CrCloses: 25 Sept 2026Closed

Timeline

Published17 Sept 2026
Pre-Bid Meeting22 Sept 2026
Closed25 Sept 2026
Bid Opening28 Sept 2026

Tender Value

₹3.9 Cr

EMD Value

₹5.8 L

Closing Date

25 Sept 2026, 5:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Work Description

Road Development works on Highway connecting Ahmednagar (SH-173) to B.B.Nagar Cross road (SH-220) from ch.0.00 km to 4.80 km via Sanehalli, Shettihalli, Bagur, Ailapura, Mantenahalli, Lakkenahalli, Madhure in Hosadurga Taluk, Chitradurga District

Tender Information

Tender ID

PWD/2026-27/RD/WORK_INDENT44147

Reference Number

PWD/2026-27/RD/WORK_INDENT44147

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PRAMC PWD Bengaluru

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredTo qualify for award of this contract, each Tenderer should be registered as Class-I Civil Contractor in KPWD

RequiredAnnual turn over certificate

RequiredSECTION 2 ITT 3 2 To qualify for award of this contract each Tenderer in its name should have in the last five years ie 2021-22 to 2025-26 b Satisfactorily completed as prime contractor at least one similar nature of work Civil Engineering Construction and Road Works Only value not less than Rs.194 Lakhs.

RequiredSECTION 2 ITT 3.2 AS PER KW DOCUMENT

RequiredSECTION 2 ITT 3.3 AS PER KW DOCUMENT

RequiredSECTION 2 ITT 3 3 Each Tenderer should further demonstrate aAvailability by owning at least 50 percent of the required following key and critical equipments for this work b The remaining 50 percent can be deployed on lease/hire for all works provided the relevant documents commitment agreements etc for availability for this work are furnished

RequiredSECTION 2 ITT 3 5 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their Available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity AXNX1.5-B Where, A is Maximum value of civil Engineering works executed in any one year during the last five years updated to 2026-27 price level taking into account the completed as well as works in progress.

RequiredGST Registration Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidder s end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka Public Procurement Portal due to internet connectivity issues and technical glitches at bidder end.

The bidder shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable.

The employer reserves the rights to reject one or all tenders without assigning any reason.

The employer is not responsible for any delay in accessing Karnataka Public Procurement portal.

Contractors should be registered with KPWD Class-I Registration and the tenderer should submit the Registration Certificate along with technical bid.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the orginal documents before approval.

All the items in the tender include all lead, lifts, labour, loading, unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of Engineer-in-charge of this work.

Contractors should follow strictly prevailing rules of labour act.

In case if the death of a contractor, after executing the agreement / commencement of the work, his legal heir, if an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work.

The Item rates quoted shall include cost of Royalty charges on construction materials and other taxes as per rates provided in prevailing Govt orders at the time of execution and including cost and conveyance of all materials curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as directed by the Engineer-in-charge of the work.

All materials required for this work shall be procured by the bidder himself and should be got tested by the quality control authorities at his own cost before use on the work. Department will not supply any materials.

The tenderer should submit proposed methodology and programme of construction backed with equipment and material planning, & deployment duly supported with broad calculation and quality management , plan, proposed to be adopted justifying their capability of execution and completion of the work as per technical specifications and within the stipulated period of completion.

Materials like steel,cement etc., required for the work shall be procured by the tenderer themselves and should get tested by the quality control authority at his cost before used on the work.

All documents should be uploaded by the contractor is to be attested by the authorized notary or an officer not below the rank of Executive Engineer and should be produced for verification at any stage of process as and when saught for .Failure to produce original documents leads to rejection of Tender.

Financial Year will be reckoned as the period between first day of April and Thirty-first day of March of succeeding year (both days inclusive).

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Units, Rates & Prices shall be quoted by the tender in Indian Rupees only

Item for which no rates or price has been entered in will not be paid for by the Employer when executed & shall be deemed covered by the other rates & prices in the bill of quantities.

The royalty charges on construction materials will be deducted as per prevailing Govt orders.

The field Lab/Mobile Lab shall be preferably located, adjacent to the site with the required amenities as per the clause. Failing which 1% of the amount of work done will be penalized.

Tenderer shall obtain the Work done Certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the tender. The Original Certificate shall be produced at the time of opening of Technical Bids for physical verification.

Tenderers are requested to read the Bid documents carefully and upload the necessary documents before submission of their bid.

To qualify for award of this Contract, each tenderer should give all details and documents as per KW-4

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer PWD, PRAMC, during office hours on all working days. It may be noted that if any of the dates mentioned above happened to be a general holiday the next working day will hold good in lieu of the dates mentioned.

PERFORMANCE SECURITY: The successful tenderer shall furnish Performance Security Deposit (Achievement Guarantee ) at 5 percent of the amount put to tender with in 20 days after approve of tender plus additional security for unbalanced tender as per rule 29.5 of the tender and clause 44 of the agreement in the form of cash/Bankers Cheque,D.D,Pay order Bank Guarantee or FD,duly pledged in the nature of ENGINEER IN CHIEF , PRAMC

The Bidders shall note that the information furnished in technical Bid will be evaluated with respect to the Technical requirement Criteria set forth in the Bid Document, which is uploaded separately. The Bids meeting the minimum Technical criteria at the discretion of the Engineer-in-Charge shall only be qualified for financial Evaluation of Financial Bids.

The contractor should maintain the work during the defective liability period, i.e. for 2 years after the completion of work at his own cost.

Payment of EMD of shall be through E-Payment in favour of Executive Engineer, and shall be valid for 45 days beyond the validity of Tender.

GST Shall be paid to the tendered amount separately.

The Contractor shall prior to commencing the works,effect and thereafter maintain insurance in the joint names of the employer and the contractor refer KW4 of SBD, clause 13 of condition of contract.

Technical Criteria

General

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (b) Satisfactorily completed as prime contractor, at least one similar nature of work (Civil Engineering Construction and Road Works Only) value not less than Rs.194.00 Lakhs.

Others -- Work done certificate issued by an officer of rank not below the rank of EE or equivalent

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (C) Executed in any one financial year, the following minimum quantities of work: 1.Embankment/Subgrade: 16950Cum 2.WMM/GSB :5426Cum 3.DBM/BM/BC/SDBC:930Cum 4.Road Signages: 48No 5. Road Marking: 465Sqm

Others -- Work done certificate issued by an officer of rank not below the rank of EE or equivalent

Capabilities of Vendor

To qualify for award of this contract, each Tenderer should be registered as Class-I Civil Contractor in KPWD

Others -- Valid KPWD Registration Certificate

SECTION 2 ITT 3.3 Each Tenderer should further demonstrate: (a)Availability by owning at least 50 percent of the required following key and critical equipments for this work. (b) The remaining 50 percent can be deployed on lease/hire for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished (a) Machineries to be owned: 1. Excavator 1 No. 2. Static Roller: 1 No. 3. Tipper: 1 Nos 4. Water Tankers: 1 Nos. 5. Vibratory Asphalt Roller : 1 Nos 6. Asphalt Paver Finisher: 1 No. 7. Mechanically Operated Bitumen Sprayer: 1 No. 8. HMP: 1 No 9.Concrete Mixer Machanically operated 1 No. (b) MACHINERIES COULD BE ON LEASE or HIRE or OWNERSHIP: 1. Tipper 1 No. 2. Thermoplastic Paint Applicator: 1No 3. Water Tanker: 1 Nos 4. Concrete Vibrator: 1 No. 5. Concrete Mixer Machanically operated 1 No

Others -- Hire / Lease agreement with original invoice of the original owner and specifying period of lease / hire

SECTION 2 ITT 3.5 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their Available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AXNX1.5-B)Where, A is Maximum value of civil Engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited.B is Value, at 2026-27 price level, of existing commitments and ongoing works to be completed during the next 9 months (period of completion of the works for which Tenders are invited)

Others -- List of existing commitments and ongoing works

Financial Status

Annual turn over certificate

Others -- Annual Turnover certificate for the past five years along with Balance sheets and UDIN mentioned duly attested by Charted accountant

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26(a) Achieved in at least two financial years a minimum financial turnover (in all classes of Civil Engineering construction and Road Works only of Rs.775.00 Lakhs.

Others -- Turnover certificate from Registered Chartered Accountant, Balance sheet and Income tax returns

SECTION 2 ITT 3.3 Each Tenderer should further demonstrate(b) liquid assets and/or availability of credit facilities of not less than Rs129.00 Lakhs (Credit lines/ letter of credit/ certificates from nationalized banks for meeting the fund requirement etc. in the format

Others -- Banker certificate in the prescribed format issued by Nationalized bank as per KW-4

Others

The tenderer shall engage a road safety expert with a Minimum Qualification Post graduation in Highway Engineering / Transportation Engineering / Road Safety Engineering with a minimum work experience of 5 years in the Highway construction and road safety aspects.

Others -- Consent Letter from the Road Safety Expert in original with date, duly signed in ink

GST Registration Certificate

Others -- Scan copy of GST Registration Certificate

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹5.8 L

Important Dates

Last Activity

17 Sept 2026

Published

17 Sept 2026

Bid Opening

28 Sept 2026

Download Ends

21 Sept 2026

Pre-Bid Meeting

22 Sept 2026

BOQ Preview

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer ston...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). ...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Chevron Boards - Supply and installation of retro- reflective Chevron signboards of 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:20...

•

Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...

•

Road Delineators - Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fit...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Mechanical Means -

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

TN16.pdf

Others - Tender notification • 0.58 MB

KW4 44147.doc

Tender Document • 0.37 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Roads

Road Development works on Highway connecting Ahmednagar (SH-173) to B.B.Nagar Cross road (SH-220) from ch.0.00 km to 4.80 km via Sanehalli, Shettihalli, Bagur, Ailapura, Mantenahalli, Lakkenahalli, Madhure in Hosadurga Taluk, Chitradurga District

Public Works Department

PRAMC PWD Bengaluru | Bangalore, Karnataka

Amount: ₹3.9 CrCloses: 25 Sept 2026Closed

Timeline

Published17 Sept 2026
Pre-Bid Meeting22 Sept 2026
Closed25 Sept 2026
Bid Opening28 Sept 2026