SPL REPAIR REPLACEMENT OF NON CLOG SUBMERSIBLE SEWAGE PUMP SETS AT SEWAGE INSTALLATION AND CONNECTED ITEM UNDER GE UTILITY AMBALA CANTT.

Amount

Dewatering & Desilting/ cleaning of sewage well of depth 10 Mtr and 9 Mtr dia taking out sludge in the form of solid manually and getting out and removal to a distance exceeding 250 mtr but not exc 500 Mtr and burried the same in low laying area as directed by Engineer-in-Charge.

Supply, Install Testing & Commissioning Non clog verticle submersible pump set with motor of capacity 40 HP, 3 Ph, 415 V with minimum 25 m Head with casing and impellor of CI , Shaft of carbon steel material , non-clog to pass 50 mm size particles complete all as specified and directed by Engr-in-Charge.

Supply, Install Testing & Commissioning Non clog verticle submersible pump set with motor of capacity 10 HP,, 3 Ph, 415 V with minimum 15 m head casing and impellor of CI , Shaft of carbon steel material, non-clog to pass 40 mm size particles complete all as specified and directed by Engr-in-Charge.

Supply, Install Testing & Commissioning Non clog verticle submersible pump set with motor of capacity 7.5 HP, 3 Ph, 415 V with minimum 15 m head casing and impellor of CI , Shaft of carbon steel material, non-clog to pass 40 mm size particles complete all as specified and directed by Engr-in-Charge.

demolition of old cracked PCC foundation complete and M & L PCC foundation of minimum size 75cm x 75cm x 20cm with PCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) including 8mm thick frame base plate of size 40cm x 40cm suitable for 7.5 HP to 40 HP Non clog submersible pump including self drill bolt of size 150 mm long and 15mm dia of shank fully threaded 04 Nos made of stainless steel complete all as specified and directed by Engr-in-Charge.Note: The plateform shall be constructed in sewage well of approx. 10 mtr deep

S & F CI column pipe both end flanged ISI marked of size 150 mm dia from sewage well of size depth 10 Mtr and 9 mtr dia including lowering down the new column pipe with rubber gasket and nut and bolts including taking down old rusted pipe complete all as specified & directed by Engineer-in-Charge.

S & F CI column pipe both end flanged ISI marked of size 100 mm dia from sewage well of size depth 10 Mtr and 9 Mtr dia class A including lowering down the new column pipe including taking down old rusted pipecomplete all as specified & directed by Engineer-in-Charge

Supply and fix CI fitting for such as bends (any type radius and angle) tapers any type (staight, bends, increasing, decreasing or double branch, cross collers, caps and plugs upto 250 mm bore complete all as directed by Engineer in charge

Supply and fix cast iron sluice valve in replacement PN-1.6 with flanged ends 150 mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron cap including rubber /fiber boared gasket nuts, washers etc complete all as specified and as directed by Engineer-in-Charge.

Description all as per item 9 here in before but 100 mm bore.

Supply and fix Non Return Valve in replacement with flanged ends of size 150mm dia complete including rubber/fiber board gasket, uts washer etc complete all as specified and directed by Engr-in-Charge

Description all as per item 11 here in before but 100 mm bore.

Dismantling wrought iron or mild steel work of any description ,rusted ,worn out, complete all as specified.

Material and labour for Mild steel framed work for such as angle/ grills Chanel/stand, granting’s/Mild Steel plates etc with ends of bars shouldered and riveted or forged into spikes, frame guard bars barred iron doors, ladders, framed balusters walk ways, railings frame work as per direction and similar work conforming to Fe-290 Gde-E-165 at any installation as per requirement complete all as specified and directed by Engr-in-Charge.

Supply ,Install Testing & Commissioning in replacement Heavy Duty Fully Automatic Star-Delta Starter in steel sheet enclosure, suitable for 70-80A Range, for max. motor output 40 HP Rating 415V, 50 Hz, 3 Phase complete all as specified and directed by Engr in charge.

Supply ,Install Testing & Commissioning in replacement Heavy Duty Fully Automatic Star-Delta Starter in steel sheet enclosure, suitable for 10-20A Range, suitable for motors 7.5 HP to 10 HP Rating 415V, 50 Hz, 3 Phase complete all as specified and directed by Engr in charge.

Material & Labour PVC insulated armoured heavy duty electrical cable with copper conductor, 1100 volts grade, cross sectional area 25 sq.mm 3 core complete all as specified & directed by Engineer-in-Charge

Material & Labour PVC insulated armoured heavy duty electrical cable with copper conductor, 1100 volts grade, cross sectional area 6 sq.mm 3 core complete all as specified & directed by Engineer-in-Charge

Supply and fix auto coupling of size 150 mm dia for sewage well of size 10 mtr depth amd 9 mtr dia complete all as specified & directed by Engineer-in-Charge

Supply and fix auto coupling of size 100 mm dia for sewage well of size 10 mtr depth amd 9 mtr dia complete all as specified & directed by Engineer-in-Charge

Supply and fix duck foot bend of size 150 mm dia for sewage well of size 10 mtr depth amd 9 mtr dia complete all as specified & directed by Engineer-in-Charge

Supply and fix duck foot bend of size 100 mm dia for sewage well of size 10 mtr depth amd 9 mtr dia complete all as specified & directed by Engineer-in-Charge

Supply& fixing in foundation GI pipe for guide rail, light grade ISI marked with all fittings complete all as specified for 50mm bore.

Supply& fixing in foundation GI pipe for guide rail, light grade ISI marked with all fittings complete all as specified for 40mm bore .

Supply& fixing in foundation GI pipe for cable protaction, light grade ISI marked with all fittings complete all as specified for 40mm bore

Material & Labour for brick masonry valve pit of internal size 120cm x 120cm x 120cm with one brick thick wall using sub class ‘B’ brick in cement mortar 1:6 over 20cm thick PCC plate form with 15cm off sets on every side of 1:3:6 type C-1 including plastering of internal surfaces and exposed surfaces with 15mm thick plastering in cement mortar 1:4 and 50mm thick RCC cover in two equal parts 1:2:4 type B-1 with 10mm dia deformed bars at 10cm center to center on both side including necessary form work with 150mm dia hole in the center complete including demollition and removing of old material from the site for credit or disposal all as specified and directed by Engineer-in-Charge.

Taking down old earthing complete and M & L earthing complete with galvanized steel plate earth electrode 60cmx60cmx6mm thick surrounded by char coal and salt buried directly in ground vertically in pit of depth not less than 2.25 mtr below gound level with top edge of the earth plate at depth of not less than 1.5mtr below ground level surrounded from all sides by char coal dust and common salt in alternate layers of 15cm depth and earth plate lectrode connected to galvanised earth lead wire with GI strip of 32x6mm by means of GI nuts bolts, check nuts and washers and connected to earthing test point drawn through and including 40mm dia GI pipe for protection including 20mm dia GI pipe for watering GI funnel, PCC earth pit (1;3;6) type C-2 with CI frame and RCC cover all as shown in electrical Plate No 3 on SSR Part-I including testing all as directed by Engr-in-Charge.

Note:- Amount of credit of Rs 72735.00 for retrieved materials is mentioned in Schedule of Credit attached in tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s Kang Builders