REPAIRS TO PLASTERING, BRICK WORK AND PERIODICAL SERVICES TO BOUNDARY WALL/CULVERT AT SOUTH OF RAILWAY LINE AT MISSAMARI UNDER GE MISAMARI

Amount

Demolition of brick work built in cement mortar incl all quoins arches pillars etc of any description, complete all as specified and as directed.

M&L for Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L for brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site, complete all as specified and as directed.

M&L for 15 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick below or above ground level complete all as specified and directed.

M&L for 100 mm thick cement concrete (1:2:4) type B2 (using 40 mm graded stone aggregate) as in path, hardstanding, sub base, complete all as specified and as directed.

Demolition of re-inforcment cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate as in cover slab and set in cement mortar (1:6) including necessary form work and mould complete all as specified and as directed.

M&L for TMT Bars 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4, complete all as specified and directed. .

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes, complete all as specified and directed.

Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedded and pointed in any morter etc, complete all as specified and directed.

M&L for Granite of any type of 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick screed bed in CM 1:6 in floors, complete all as specified and as directed.

M&L for Granite of any type of 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 10 mm thick screed bed in CM 1:4 in vertical surfaces of wall , complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to Fe-290 (Gde-E-165) complete all as specified and directed.

M&L for MS work for fencing post and struts made from angle iron and flat iron in any section including cutting tops to shape , drilling holes and notching for fixing of wires etc confirming to Fe -290 or Fe -330, with and incl necessary nut and bolts of 12mm dia of reqd length complete all as specified and directed.

Dismantling fancing wire mesh, any type complete all as specified and directed.

Supply only chain link MS Zink coating 60gsm as per IS 4826 fencing of 75mm mesh size and 4mm dia or wire complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh, size and any type of standards rails straining bolt etc including provision of binding wire complete all as specified and directed.

S & F in repairs Galvanised 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs straining and fixing to any type of standard rails straining bolts, includigng, securing or tying at crossings with and provision of steel wire, staples or steel pins, etc complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of wall and applying one coat of cement base paint, complete all as specified and directed.

M&L for complete removal of existing old surface of wall and applying two coat of cement base paint, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for Complete removal of existing old treatment of walls including cornices, plasters etc and applying two coat of white wash complete all as specified and directed

M & L for preparation of old decorated plastered or unplastered surfaces and apply one coat of white wash on walls complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a redoxide primer complete all as specified and directed.

Shree Krishna Traders

BEE KAAY TRADERS

M/S RANA ENGINEERING ENTERPRISE

shree kamakhya traders

M/S Mahabir Traders

M/S Singha Enterprise

M/S K.K.TRADERS

LAXMI & GANESH ENTERPRISE