REPAIR/REPLACEMENT OF PLYWOOD IN CHARPOY AND BED HARD STEEL REPLACEMENT FO CUSHION FOR SOFA SET, CHAIR DINING CUSHIONED, CHAIR WRITING ETC AT FURNITURE YARD BADDOWAL UNDER GE LUDHIANA

Amount

ALMIRAH LARGE STEEL S&F for the following parts of Almirah large steel including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. FD-1032, FD-1033

Mild steel lock 65mm size with key in duplicate

Mild steel chromium plated handle 100mm long.

Paint with one or more coats on almirah all as specified & directed by Engineer-in- charge.

ALMIRAH MEDIUM STEEL Supply and fixing for the following parts of Almirah medium steel including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. FD-1031,1034

Mild steel lock 65mm size with key in duplicate

Mild steel chromium plated handle 100mm long.

Paint with one or more coats on almirah all as specified & directed by Engineer-in-charge.

LOCKER BED SIDE STEEL Supply and fixing for the following parts of Locker bed side steel including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. FD-1029

Mild steel Hasp and Staple

Mild steel chromium plated handle 100mm long.

Paint with one or more coats on Locker all as specified & directed by Engineer-in- charge.

REPLACEMENT OF PLYWOOD FOR CHARPOY GI PIPE PLYTOP: M&L for removal of unsv Plywood from charpoy GI pipe and fixing new 12mm thick Plywood BWR grade with 75mm long 6mm dia fully threaded nuts and bolts with washers on both side 3 No in each long rail and 2 No in each short rail including 3 No iron strips (900x25x6mm) between two rails below Plywood top and including rounding off the corners of plywood complete all as specified & directed by Engr-in-Charge. FD-220 Make:- Archid / century / Greenply.

REPAIR OF CHARPOY GI PIPE:S&F in replacement long rail made out of 32mm dia medium grade galvanised pipe including (welding / threading ) as per existing pattern complete all as specified & directed by Engr-in-Charge.

Labour for removal of unsv short rail from frame of Charpoy GI pipe, Fixing of short rail made out of unserviceable long rail 4.01 above after cutting & threading both ends to required size to make two short rails complete all as specified and directed by Engr-in-Charge

Labour for removal of unsv leg from frame of Charpoy GI Pipe . Fixing leg made out of unserviceable short rail 4.02 above after cutting & threading both ends to required size to make two leg complete all as specified and directed by Engr-in-Charge

Supply & Fixing three way GI elbow 32mm dia suitable for charpoy GI pipe all as specified and directed by Engr-in-Charge

Supply & Fixing Check nut GI 32mm dia suitable for charpoy GI pipe all as specified and directed by Engr-in-Charge

Replacement of ply BED PLY TOP and fixing new 12mm thick plywood BWR grade with screw including rounding off the corners of plywood complete all as specified and directed by Engineer-in-Charge. FD-246 make:- Archid / century / Greenply

French polishing with one or more coats on bed frame and all as specified & directed by Engineer-in- charge.

TABLE 900MM x 600MM x 760MM WITH & WITHOUT DRAWERS M&L for providing following parts of table 900mm x 600mm x 760mm dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. Drg No FD-224,283 & 284

Table made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified & directed by Engineer-in- charge.

Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Stiffners made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Drawer made out of 12mm thick commercial Ply Wood with teak shade with 25mm dia knob complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame and four PVC shoe on the leg of Table all as specified & directed by Engineer-in- charge.

TABLE BED SIDE M&L for providing following parts of Table bed side dismantling & removing of old unsv parts from the frame complete all as specified & directed by Engineer-in- charge. Drg No FD/E6/MAP/15R

Table top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified & directed by Engineer-in- charge.

Table Bottom made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified & directed by Engineer-in- charge.

Table side made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified & directed by Engineer-in- charge.

Mild steel powder coated handle100mm long for drawer complete all as specified & directed by Engineer-in- charge.

6mm thick commercial plywood with headless nails of table bed side for fixing table back side complete all as specified & directed by Engineer-in- charge.

Drawer made out of 12mm thick commercial Ply Wood and front of drawer made out of pre-laminated particle board 18mm thick exterior gradecomplete all as specified & directed by Engineer-in- charge.

Telescopic stainless steel channel for suitable size as required and PVC shoe on the leg of Table complete all as specified & directed by Engineer-in- charge.

TABLE WRITING M&L for providing following parts of table writing including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. FD-275

Table top 1145x600mm made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete.

French polishing with one or more coats on table frame and four PVC shoe on the leg of Table all as specified & directed by Engineer-in- charge.

TABLE OFFICE CLERK STEEL S&F for the following parts of Table office clerk including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. FD-84M, FD-1004

Lock 6 lever of brass with two keys

Table top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete.

Paint with one or more coats on almirah all as specified & directed by Engineer-in-charge.

TABLE OFFICE OFFICER STEEL S&F for the following parts of Table office officer including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. FD-84M, FD-1003

Mild steel lock 65mm size with key in duplicate

Table top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top fixed with nails complete all as specified & directed by Engineer-in- charge

Paint with one or more coats on almirah all as specified & directed by Engineer-in- charge.

TABLE 900MMx600MMX760MM STEEL WITH OR WITHOUT DRAWER: S&F in replacement Table top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top fixed with nails complete all as specified & directed by Engineer-in- charge. FD-1007 & 1008

Paint with one or more coats on almirah all as specified & directed by Engineer-in- charge.

TABLE 900MMx900MMx760MM STEEL S&F in replacement Table top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top fixed with nails complete all as specified & directed by Engineer-in- charge. FD-1009

Side Rail

Paint with one or more coats on table frame and PVC shoe on the legs of table all as specified & directed by Engineer-in- charge.

TABLE DINNING FOR 4 PERSONS M&L for providing following parts of table dinning for four persons including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. FD/MAP-II/03

Table top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top fixed with nails complete all as specified & directed by Engineer-in- charge.

Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Corners Between all Legs and Rails made of first class Teak Wood duly smoothed size complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame and four PVC shoe on the leg of Table all as specified & directed by Engineer-in- charge.

PREM CONSTRUCTION COMPANY

PACHNANDA BUILDERS

B S ENTERPRISES