Earthan to BT Constructing of Sara Main Road to Zadi Faliya EMRS School Road Ch 0/0 to 0/400 Ta,Vansda Dist.Navsari.

Name of Work:- Earthan to BT Constructing of Sara Main Road to Zadi Faliya EMRS School Road Ch 0/0 to

0/400 Ta,Vansda Dist.Navsari.

: : BILL OF QUANTITY.' : :

Percentage Rate Tender

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

1 Clearing and grubbing road land including uprooting rank 0.24 Hect 34889.38

vegetation grass bushes,shrubs,sapling and trees girth up to

300 mm removal of stumps of trees cut earlier and disposal

of unserviceable materials(D) By mechanical means in area

of thorny jungle

2 Earthwork in cutting in all sorts of soil and soft murrum 299.00 Cum. 106.81

including conveying and putting the stuff in spoil bank

maintaining minimum distance of five meter between top

edge and cutting and toe of spoil bank.

3 Supplying and fixing reinforced concrete heavy duty non- 30.00 rmt 1968.38

pressure pipes with collars for culverts carrying heavy traffic

as per IS 458-1991 specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(v) 600mm dia.

4 Earthwork for embankment including breaking clods, 545.00 Cum. 173.67

dressing with all lead and lift and including watering rolling

and consolidation of subgrade in layers at O.M.C. to

required dry density including filling the depression which

occur during the process using power roller 8T to 10T.(E)

From Borrow area within 3.0KM. lead

5 Supplying, Stacking, Spreading & rolling of Hard Murrum on 54.00 Cum. 684.58

road side for hard side shoulder of work as per specification

including filling the mesure boxes of standard size etc.

6 Construction of granular sub-base by providing coarse 264.00 Cum. 765.85

graded material grading-II, spreading in uniform layers with

motor grader on prepared surface, mixing by mix in place

method with rotavator at OMC, and compacting with

vibratory roller to achieve the desired density, complete as

per clause 401.B

7 Construction of Granular Sub Base by providing coarse 256.00 Cum. 813.46

graded machine crushed B. T. material satisfying MOST

Specification of Grading - I using 53 mm to 26.5 mm @ 30%

(M.C. Metal), 26.5 mm to 4.75 mm @ 60% (M.C.Metal),

mm below @ 10% (Stone Dust) including spreading in

uniform layer with motor grader on prepared surface, mixing

by mix in place method with rotavator at OMC and

compacting with vibratory roller to achieve the desired

density with C.B.R. > 30% etc. complete.

8 Providing, laying, spreading and compacting graded stone 249.00 Cum. 1340.27

aggregate to Wet Mix Macadam specification including

premixing the Material with water at OMC in mechanical

mix plant carriage of mixed Material by tipper to site,

laying in uniform layers with paver in sub- base / base

course on well prepared surface and compacting with

vibratory roller to achieve the desired density.

9 Providing and applying evenly Priming coat with emulsion 2395.00 Sqmt 63.41

asphalt at the rate of 7.50 Kg/ 10 Sq.m on road surface

using emulsion SS-1 (Himcol Made) pressure spreayer etc.

complete including the cost of asphalt

10 Providing and laying bituminous base course 37.5mm thick 179.60 MT 2811.32

compacted in one layer with tack coat of Emulsion RS1 at

the rate of 2.50 Kg / 10 Sqmt. and using B.T. stone

aggregate or required gradation and asphalt (VG-30) grade

for mixing @ 1.99 % by weight of total mix for mixing

including heating the aggregate and asphalt by drum mix

plant and spreading the same by paver finisher and

consolidation with vibratory roller including providing all

meterials, equipments, tools and plants, oil, kerosene, fire

wood, labour chrges etc. complete.

11 Providing laying & rolling of 25 mm thick Open graded 125.70 MT 3977.49

Premix bituminous carpet with B.T. aggregate as specified

and using Emulsion RS1 for tack coat at the rate of

kg/10 sq.mt. and using bitumen grade VG-30 for Mixing with

aggregate at the rate of 3.36 % i.e. 33.60 kg / M.T. of total

mix including heating and mixing in drum mix plant

transporting and spreading the same with paver finisher and

consolidation with vibratory roller including necessary fire

wood , oil , lubricant , labour charges etc. using contractor's

own drum mix plant and equipment ,tool etc .complete in

accordance with the requirement of specification.el, oil,

lubricant and labour charges etc. complete.

12 Providing and laying seal coat with B.T. aggregate as 64.70 MT 4484.92

specified using aggregate at the rate of 0.18 Cu.mt./10 Sq.

mt. and bitumen grade VG-30 for mixing with aggregate at

the rate of 4.5 % i.e. 45.00 Kg. / M.T. of total mix including

heating and mixing in drum mix plant and transporting and

spreading the same by paver finisher and consolidation with

vibratory roller including necessary fire wood , oil , lubricant

labour charges using contractor's own drum mix plant,

machineries and equipment tools etc. complete in

accordance with the requirement of specification

13 Providing and laying asphalt painting on B.T. surface with 2395.00 Sqmt 47.02

bitumen VG-30 at rate 5.00Kg / 10Sq.mt. including

spreading stone dust for painting surface at rate of

14 Providing and fixing ordinary Kilometer stone of precast C.C. 1.00 Nos. 704.33

1:2:4 including necessary reinforcement as per I.R.C. type

design in C.C. 1:4:8 including painting,lettering etc. complete

(For O.D.R and V.R.)

15 Providing and fixing Hectometer as per I.R.C. type design 2.00 Nos. 356.50

including painting, lettering etc. complete.(ii) Fixing in C.C.

16 Informatory Signs :-Providing and fixing sing boards made 1.00 Nos. 3856.90

out of 2mm aluminium sheet; size 80 x 60cms. rectangle as

per the design of IRC-67-1977 pre treated with phospheting

process & acid teching; coated with one coat of epoxyprimer

and two coats of best qualityepoxy paint; reflectorised with

retro refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand postand frame fabricated

from suitable sizeiron angle of 35 x 35 x 3mm75x75x6mm

as required; painted with best qualityepoxy coatings in black

and whitebends. the details of symbol for eachboard shall

details of symbol for eachboard shall be as per the

instruction ofengineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x45 x 60cms. for each leg.

including excavation curing tec. complete under the

supervision of engineer in charge.(A) Engineer Grade(VR)...

17 MMGSY Logo Board:- Providing and fixing MMGSY Logo 1.00 Nos. 5050.00

Board made out of 2mm aluminium sheet, as per the

drawing & design. Pre treated with phospheting process

and acid etching coated with one coat of epoxy primer and

two coat of best quality epoxy paint, refloctrorized with retro

reflective sheeting as per the latest M.O.S.T. specification,

3.1 Mt. long stand post and frame fabricated from suitable

size iron angle of 35 x 35 x 3 mm, 75 x 75 x 6 mm as

required painted with best quality epoxy coatings in black

and white bends. The details of symbol for each board shall

be as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x 60 cms for

each leg, including excavation curing etc. complete under

the supervision of Engineer-In-Charge (A)Engineering

18 Village name/ Bump Ahed sign :-Providing and fixing sing 4.00 Nos. 5045.36

boards made out of 2mm aluminium sheet; size 90 x 60cms.

rectangle as as per the design of IRC-67-1977 pre treated

with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy

paint; reflectorised with retro refiective sheeting as per latest

M.O.S.T. Specifications; Letters and numerals should be as

per IRC-30-1968, 3.1m long (2 nos) stand post and frame

fabricated from suitable size iron angle of 50 x 50 x 5mm

painted with best quality epoxy coatings in black and white

bends. the details of symbol or inscription / numerals for

each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size

45 x 45 x 60cms. for each leg. including excavation curing

etc. complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

19 Direction sign (Junction board):-Providing and fixing sing 2.00 Nos. 14831.71

boards made out of 2mm aluminium sheet; size 244 x

122cms. rectangle as as per the design of IRC-67-1977 pre

treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy

paint; reflectorised with retro refiective sheeting as per latest

M.O.S.T. Specifications; Letters and numerals should be as

per IRC-30-1968, 3.1m long (2 nos) stand post and frame

fabricated from suitable size iron angle of 50 x 50 x5mm

75x75x6mm as required; painted with best quality epoxy

coatings in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x 45 x 60cms. for each leg.

including excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineer Grade(VR)...

20 Cautionary Warning Sign :-Providing and fixing sing boards 6.00 Nos. 3808.66

made out of 2mm aluminium sheet; size 90 x 90 x 90 cms.

equilateral triangle as per design of IRC-67-1977. Pre

treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy

paint ;reflectorised with retro refiectivesheeting as per latest

M.O.S.T.Specifications; 3.1m long stand postand frame

fabricated from suitable sizeiron angle of 35 x 35 x 3mm,

x 75 x 6mm as required; painted with bestquality epoxy

coatings in black andwhite bends. The details of symbol

foreach board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size

x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge.(A)

Engineer Grade(VR)

21 Road marking with hot applied thermoplastic paints with 83.75 Sqmt 367.72

reflectorising glass beads on bitumin surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm

area, thickness of 2.5mm is excludingof surface applied

glass beds as per IRC:35- 2015. The finished surface to be

level, uniform and free from streaks and holes. zebra patta

/bump patta lane/center line/ edge line/cut patta. The white

color marking should provide liminance coefficinet on

cemend road shalll be min 130 mcd/m2/lux and Asphalt

road shall be min 100 mcd/m2/lux during the service

lifeduring the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity

and skid resistance as mentioned in the section-15 of IRC

35-2015. Warranty for the Retro reflectivity should be two

22 Supplying and fixing cat eye made out from Acrilo beautile 68.00 Nos. 375.72

sterine injuction high compressed molding with reflector

made of MMC (prismatic type of size 12cm x 6cm x 2.5cm)

provided with bituminous adhesive 100g. with each unit for

fixing. (High Intensity grade)

23 Chevron sign :-Providing and fixing sign boards made out of 10.00 Nos. 3711.75

1.5mm aluminium sheet / 3mm ACP (Aluminum composite

Panel); size 60x50cm rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per

ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr

long stand post of Iron Angle 75 x75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable size

iron angle of35x35x3mm; painted with bestquality epoxy

coatings in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 7 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be

24 Regulatory/Mandatory signs :Providing and fixing sing 6.00 Nos. 3439.81

boardsmade out of 2mm aluminium sheet; size 60cms.

diameter circle asper the design of IRC-67-1977 pre treated

with phospheting process & acid eteching; coated with one

coat of epoxy primer and two coats of best quality epoxy

paint; reflectorised with retro refiective sheeting as per latest

M.O.S.T. Specifications; 3.1m long stand post and frame

fabricated from suitable size iron angle of 35 x 35 x

3mm75x75x6mm as required; painted with best quality

epoxy coatings in black and white bends. the details of

symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision of

engineer in charge.(A) Engineer Grade(VR)

25 Hazard Marker Sign :-Providing and fixing sign boards made 2.00 Nos. 3518.69

out of 2.0 mm aluminium sheet / 4 mm ACP (Aluminum

composite Panel); size 90x30 cms. rectangular as per

design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 1.8mtr long stand post of Iron Angle

75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 7 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be submitted

by contractor. (B) Class-B Type-4 Retro Reflective

26 STOP SIGN:-Providing and fixing sing boards made out of 1.00 Nos. 4676.06

2mm aluminium sheet; size 90 x 90cms. rectangle as per

the design of IRC-67-1977 pre treated with phospheting

process & acid teching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint;

reflectorised with retro refiective sheeting as per latest

M.O.S.T. Specifications; 3.1m long stand post and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm

75x75x6mm as required; painted with best quality epoxy

coatings in black and white bends. the details of symbol for

each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size

45 x 45 x 60cms. for each leg. including excavation curing

tec. complete under the supervision of engineer incharge.(A)

Engineer Grade(VR).