MISC REPAIR TO WALLS, FENCING, OUTDOOR TILES, PAINTING AND OTHER MISC B/R WORK IN SUMMER CAMP AREA AND JCOS LIVING AREA AT TRANSIT CAMP PALCHAN

Amount

Dismantling PVC sheet/ flooring including cleaning the surfaces complete all as specified and directed by Engr-in-Charge.

M&L for 1.5 mm thick PVC sheets laminated plain coloured marble,mosic or molted finish laid with rubber base adhesive in floors compete all as specified and directed by Engr-in-Charge.

All as per ser Item No 2 here-in-before but on skirting complete all as specified and directed by Engr-in-Charge

M&L for synthetic wooven flooring carpet weight 1.5kg/sqm fixed with approved rubber base adhesive as in floorscomplete all as specified and directed by Engr-in-Charge.

All as per ser Item No 4 but on skirting complete all as specified and directed by Engr-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and directed by Engineer-in-Charge

Demolition of PCC in ground floors and pavings n exc 15cm thickness including below or above ground level complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:4:8) type D2 40mm graded stone aggregate in foundations, fillings and Mass concrete complete all as specified and directed by Engineer-in-Charge

M&L for 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection complete all as specified and directed by Engineer-in-Charge

M&L for Hard core of gauge n.exc 63mm, with broken stone aggregate,deposited,spread and levelled in layers n.exc 15 cm thick, watered to a true surfacecomplete all as specified and directed by Engineer-in-Charge

M&L for 100 mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in subbase of floor complete all as specified and directed by Engineer-in-Charge

M&L for providing cement conc 1:2:4 type B0 as in mud stops rounded or chemfered complete all as specified and directed by Engineer-in-Charge

M&L for 15mm thick rendering in CM 1:4 on stone masonry surfaces for laying of tiles complete all as specified and directed by Engr-in-Charge.

M&L for 20mm thick Screed bed or bedding layer in cement mortar 1:6 for laying of floor tiles complete all as specified and directed by Engr-in-Charge.

Demolition of brick work/stone masenary built in cement mortar or cement lime mortar including all quoins, arches etc complete.

M & L for chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer-in-Charge

M&L for machine pressed precast concrete interlocking paver block with Gery cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and directed by Engineer-in-Charge

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 20mm thick screed bed or bedding layer of cement mortar 1:6, all as specified and directed by Engr -in- Charge.

M&L for glazed coloured ceramic tiles of size 300X450X7 mm thick on vertical surfaces such as skirting dados, risers etc set and jointed in neat cement slurry and pointed in white/coloured cement to match with colour of tiles complete all as specified and directed by Engineer-In- Charge.

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engineer-In- Charge.

M&L for Pre-cast cement concrete block 1:3:6 type C1 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar.complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge. (Make of distemper : Asian or equivalent)

M & L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge. (Make Acrocem/Snowcem and equivalent)

M&L for one coat of synmthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., Fe 410 -W (GdeE- 250) quality-A, complete all as specified and directed.

S & F, mild steel Windows Chajja / wind ties for roof covering including screwing bolts, etc complete all as specified and directed by Engineer-in-Charge

S&F, 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed by Engineer-in-Charge

S&F, Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge

M&L for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, all as specified and directed by engineer-in-charge.

S&F for 25mm dia MS curtain rod with PVC coating (decorative type) fixed with MS hooks incl side brackets (both side) complete all as specified and as directed by Engineer-in-Charge.

M/S. TARA ENTERPRISES

NATHU RAM AND SONS

M/s Parmod Kumar

Arsh Builder

M/s Anil Kumar

V K Constructive Builders

CHOPRA BUILDERS