ADDITIONAL WORKS OF INDIRA GANDHI INTERNATIONAL SPORTS COMPLEX SOCIETY AT GOLAPAR, HALDWANI, UTTARAKHAND

Amount

DSR Item- 2.6.1 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

DSR Item- 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

DSR Item- 2.26.1 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil

DSR Item- 4.1.6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

DSR Item- 5.33 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

DSR Item- 5.33.1 All work upto plinth level

DSR Item- 5.33.2 All work Above plinth level

DSR Item- 5.9 Centering and shuttering including strutting, propping etc. and removal of form for : (Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick)

DSR Item- 5.9.1 Foundation, footing, bases of columms, etc. For mass

DSR Item- 5.9.2 Walls

DSR Item- 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

DSR Item- 11.21 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.

DSR Item- 11.21.1.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile

DSR Item- 11.21.2.1 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile

DSR Item- 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

DSR Item- 13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

DSR Item- 13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work

DSR Item- 11.47.1 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 500x500 mm

DSR Item- 6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

DSR Item- 13.3.1 20 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand)

NSI Item- Pool floor inlets : 110/ 63 mm dia id UPVC pipe with reducer T 110 to 63mm including tail piece of 63 mm dia 20 cm long with pool floor inlet made out of ABS plastic white colour with S.S. screws of flow rate 5000 Itr/hrs to be provided. Top of floor inlets to be in level of floor tiles provided in swimming pool as per instruction of manufacturer. Pool floor inlet to be provide of following manufacturer.

NSI Item- Stainless steel ladders shall be provided with Nos of treads three, four or five as shown in drawings of Swimming pool made out of model stainless steel AlSI-304 of width 500 mm with handrails and shall be 38 mm dia of stainless steel with non-slip 4 steps

NSI Item- Pool ladder 5 Step, dia 38 mm, SS 304 MOC, Anti slippery treads Make:

NSI Item- Pool ladder 2 Step, dia 38 mm, SS 304 MOC, Anti slippery treads Make:

NSI Item- Over flow grating channel 300 mm x 300 mm wide - shall be provided as shown in drawing with slope 1:300, towards balancing tank including Gratings made in white UV stabilized PPl of size wide

NSI Item- 900 mm SS vacuum Head Make

NSI Item- Vacuum Hose 100 FT, Vacuum hose with cuffs & sun light resistance complet

NSI Item- Algae brush 18 inch long with SS bristle

NSI Item- Curved brush18 inch long with Nylon brush

NSI Item- Telescopic pole 4.8 Mtr long with extendible up 9 Mtr made of aluminum tubing complete Make: lon Exchange India Ltd

NSI Item- Leaf Rack made of aluminum MOC complete

NSI Item- Leaf skimmer made of aluminum MOC complete

NSI Item- Test Kit for PH & Residual chlorine

NSI Item- TCCA 90- 100 kgs or Hypo liquid for commissioning

NSI Item- Shepherd Hook with 16ft Pole

NSI Item- Life Buy

NSI Item- Hair & lint catcher size 500 mm x 750 mm x 40 mm .SS Frame with mesh.

NSI Item- Diving board/Flexible spring board:- 3 nos spring & 3 nos diving board Irrespective of what is mentioned in drawings diving board/fiexible spring board shall be fiber glass board with non-slip surface covering entire length of board with the repellant, safety including anchor bolt and fitting as directed by manufacturer. The board shall have highly resistant gel coated surface which remains flexible even after UV exposure and adverse weather condition all as shown in drawing and all as per instruction of manufacturer with necessary fasting kit.

NSI Item- Spring Board @1m ht

NSI Item- Diving Board 3m Ht

NSI Item- Stainless steel. handrail shall be of grade AlS-304. Handrail shall be of dia 32mm and shall be provided as shown on drawing including brackets, fixtures and fiting complete.(length-2.5 each piece)

DSR Item- 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

DSR Item- 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers

DSR Item- 13.19.1 Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement

DSR Item- 4.2.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

DSR Item- 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

NSI Item- Supply, Installation on existing RCC pedestal, testing and Commissioning of Silent Genset of 320kVA 'Prime' rating, complete with day tank, residential silencer, AV mounting pads, Manual Control Unit, Cable Box and all standard accessories, as required for satisfactory operation of the Genset on standalone basis.

DSR Item- 11.5 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete

NSI Item- Supply and installations of Maple wood sports flooring as per specifications and conditions mentioned below:Hard maple flooring Supply of 20mm thick MFMA certify Hard maple Flooring (each individual flooring 8 strip engraving MFMA mill certification number) width of Hard Maple is 57mm and random length varying from 230mm to 1800mm, Third & Better Grade jointe together with tongue and groove on all four sides of all boards. Substructure of Maple wood shall consist of Softwood batten, Substructure of maple wood flooring shall consist of sleeper of Spruce or Pine having 63mm wide and cross section of 38 mm and laid perpendicular to the main flooring planks ata spacing 305mm centre to centre, including 9.5 mm thick rubber shock pads at 305mm centre to centre spacing and polyethylene membrane installed over the concrete base, beneath the flooring system as a vapour barfier between the concrete and wood floor. GYM FINISH Machine sanding, Two coat of oil modified Poly urethane Gym sealer and one cpats of oil modified Poly urethane Gym sports finish in accordance with manufacturer make Action, Robbins, Connors.

NSI Item- Rubber Skirting Factory supplied 75mm x 100mm rubber base molding to include air channelling in back of base to provide full ventilation of the sub-floor system. Fixed to the wall

NSI Item- Aluminium Skirting: Supply of 2.6 mm thick Aluminium Profile for periphery of sports flooring, wioth of Aluminium profile 126 mm and 6feet long with counter hole and Anodising

NSI Item- Supply &installations 7 mm thick Synthetic Sports Flooring for Multipurpose Hall, Table Tennis, Gym 7mm thick TARAFLEX SPORTS M EVOLUTION synthetic sports surface it consists of wear layer not less than 2mm thick, with double fiber glass grid for sound stability on floor. CXPTM HD double density foam backing with D-MAXTM+ ensuring highest possible resistance to indentation, durability and energy return. Surface treated with protecsol, to reduce skin burn and sanosol to avoid fungal Browth. Sheet width 1.5 mts, joined with seamless hot welding. Floorings laid with adhesive as per manufacturers instruction over existing leveled surface including game lines marking. Technical Specifications Shock absorption under EN 14808 standard not less than 25% Ball bounce under EN 12235 standards not less than 90% Abrasion resistance as per EN IsO 5470-1 shall be < 350 mg. Friction coefficient as per DIN- 18032 0.4 -0.6, Sound isolation shall be> 23 dB.

NSI Item- Supply and installtion 10 mm thick full EPDM synthetic Surface for Locker Room

NSI Item- Movable badminton post

NSI Item- Suspended Basketball Court

NSI Item- Supply of iITFaproved of 19 mm table top Table tennis Table with 2 set of necessary accessories weight of Table not less than 70 kg Make :- Joola Or Equivalent

NSI Item- BOXING RING Supply& installation of Boxing Ring podium of approved manufacturer having total Size 25.5 ft x25.5 ft including 20 ft. x 20 ft. playing area inside the rope with Height of ring 1mtr from the ground level including Base made up of 50mm X 50mm X 2.5mm thick square heavy duty steel tubing duly powder coated with nut bolting system for joining and good for easy to assemble and dismantle including Four nos ropes 3.5inch thick fully adjustable covered with finest quality synthetic fabric cover in white, blue and red colour with superlone foam pipe including Corner poles made up of 4 inch dia heavyduty steel pipe in white, blue and red colour with screw loops for tightening the ring ropes including Laminated waterproof seasoned hard wood planks of 8 ftx 3ftx 1.25 inch thick used on the top of six tables to level thefloor even throughout the surface including covering of Total Wooden plank floor with 3/4 inch closed cell high density (E.P) Expended polythene foam for shock reduction covered with waterproof canvas cover including Four protection corner padding

NSI Item- Entrance Gate signago 18 guge ss,304 grade ss,4mm ACP sheets 3mm Acrylic CNC cut 3" MS Pipe with Primer and Paint,Fts,(Aprox 100 letter of 2.5 Ft Each)( SINGLE SIDED)(Size 5ftX150ft) The structure will be single sided and and made out of SS/MS.The graphic panel will be made out of 4mm ACP sheet which will be fixed on 1” MS Frame.This sheet will have vinyl/Acrylic graphics on both sidde

NSI Item- Big Totel Design 4mm ACP Sheets,1mm Beeding sheet 3mm Acrylic CNC Cut,3M or Avary piotter cut Vinyl,Grouting 1.5X1.5X2 cu.fts,6” garter,1”MS Pipe,10mm MS Iron sheet,2” Angle,Foundation bolt,Prime & paint(Double SIDED) The structure will be single/Double side (as per location),2” angle,1”MS Pipe,1” Foundation bolt will be used to create base structure wii be covered by 4mm ACP sheets,3MM Acrylic Letters for the content,3M/Avary Vinyl for the grapic Layout

NSI Item- Small Totem Design 4mm ACP Sheets,1mm Beeding sheet 3mm Acrylic CNC Cut,3M or Avary piotter cut Vinyl,Grouting 1.5X1.5X2 cu.fts,6” garter,1”MS Pipe,10mm MS Iron sheet,2” Angle,Foundation bolt,Prime & paint(Double SIDED) The structure will be single/Double side (as per location),2” angle,1”MS Pipe,1” Foundation bolt will be used to create base structure wii be covered by 4mm ACP sheets,3MM Acrylic Letters for the content,3M/Avary Vinyl for the grapic Layout

NSI Item- Multi Directional Signage 18 guge ss,304 grade ss,4mm ACP sheets,1mm Beeding sheet, 3mm Acrylic CNC Cut, 3" MS Pipe with Primer and Paint,1”ms Pipe for Frame,3M Or Avary plotter cut Vinyl, Grouting 2X2X2X3 cu.fts, (Double SIDED) The structure will be single sided and and made out of SS/MS.The graphic panel will be made out of 4mm ACP sheet which will be fixed on 1” MS Frame.This sheet will have vinyl/Acrylic graphics on both sidde

NSI Item- Parking Singange 304 grade SS Pipe 3MM ACP sheet, CNC Cut,3M Reflective Vinyl,(DOUBLE SIDED) The structure will be single/Double side (as per location),2” angle,1”MS Pipe,1” Foundation bolt will be used to create base structure wii be covered by 4mm ACP sheets,3MM Acrylic Letters for the content,3M/Avary Vinyl for the grapic Layout

NSI Item- Mandatory Signage PU coated ACP sheet Base ( Matt) Icons/Font/graphic-in-vinyl 3MM ACP With 3M Reflective Vinyl

NSI Item- Speed Signage 304 grade SS Pipe 3MM ACP sheet, CNC cut 3mm Acrylic letters PU coated(Matt),3M reflective Vinyl,(DOUBLE SIDED) 2”SS Pipe Gouted 1’x1’1’ Cu fts,1” SS Frame overlapped by 3M Approved Colour Scheme profile Reflective Vinyl(two colours)

NSI Item- Gate Number Signage The structure will be single/Double side (as per location),2” angle,1”MS Pipe,1” Foundation bolt will be used to create base structure wii be covered by 4mm ACP sheets,3MM Acrylic Letters for the content,1mm Beeding sheet for raising,3M/Avary Vinyl for Grpahic Layout

NSI Item- Information Signage 4mm ACP sheets, 3M Or Avary plotter cut Vinyl, Grouting 1.5X1.5X2 cu.fts,6” garter,1”MS Pipe,10mm MS Iron sheet,2” Angle,Foundation Bolt,Fastners,primer & Paint. The structure will be single/Double side (as per location),2” angle,1”MS Pipe,1” Foundation bolt will be used to create base structure wii be covered by 4mm ACP sheets,3MM Acrylic Letters for the content,1mm Beeding sheet for raising,3M/Avary Vinyl for Grpahic Layout

NSI Item- Wall Mounted Signage 5MM Acrylic Sheet,3M or Avary Plotter Cut Vubyl,1” Spacers, 5MM Acrylic Structure ,3M Vinyl For Graphic presentation,Spacers for wall mounting with Aluminium Wire

NSI Item- Lift ID 3MM ACP,3M REFLECTIVE VINYL 3MM ACP,3M REFLECTIVE VINYL

NSI Item- Room Plate 3MM ACP,3M REFLECTIVE VINYL 3MM ACP,3M REFLECTIVE VINYL

NSI Item- Celling Suspended Signage 3MM ACP Sheets,1mm Beeding sheet,3MM Acrylic CNC Cut Letters,3M or Avary Plotter Cut Vinyl,1” Spacers SS 304 GRADE ROD 3MM Acp Strcuture,3MM Acrlic CNC cut Letts passing,3M Vinyl For Graphic Presentation,Spacers for Wall Mounting With Aluminium Wire

NSI Item- Fire Exit Sigange PU Coated ACP Sheet base (matt)Icons/Font/graphic-in vinyl 3MM ACP,3M REFLECTIVE VINYL

NSI Item- Exit Sigange PU Coated ACP Sheet base (matt)Icons/Font/graphic-in vinyl 3MM ACP,3M REFLECTIVE VINYL

NSI Item- Floor Identification Signage 18 guage ss304 grade, carbone etching letters

NSI Item- Trolley mounted suction pump capacity 1.5 HP self priming Pump including rope & starter complete (i) Pool cleaner semi type with trolley, 6 Nos of float complete and including PP Rope pump with trolley starter, cable etc complete.

NSI Item- Filter made of fibre Glass and reinforced with Polyster yarn fitted with collector arms and diffusers made from unplasticised PVC and PP.Filter Diameter 2000 mm working pressure 2.5 Kg/Sq.cm, (37.5 PSI ), Test Pressure 3.75 Kg/sq.cm (56.25 PSI). Flow rate of 125 Cu.m /hr at a specific velocity of 40 Cu.m/hr/Sq.m.Filter to be supplied with lid in polyester resin and fibre glass manual air purge cap, for sand discharge, pressure guage, media-fine & course media along with 5 valve battery with lateral in PVC pipe-10 KG/CM2 ,with frontal piping and valve in 10 kg/cm2 UPVC pipe

NSI Item- Filter feed pump with preflter: 05 Nos (4W+ 1S) Filter Feed Pump flow rate 150 m3/hr at 20 mtr head with Pre Filter, 20 hp pump max. horizontal centrifugal pumps along with motor.

NSI Item- Dosing Pump with tank - Dosing pump CDS - 5 Capacity 0- 16 LPM, alum, TCCA -90 with chemical dosing tank capacity 200 Ltrs -01 Nos including metering pump 0-16 LP

NSI Item- Auto ph controller and salt clorimeter Capacity 0 - 16 LPM, acid/ alkali with chemical dosing tank capacity 200 Ltrs With slow stirrer.

NSI Item- Pool drains (drain out sump) - 500 MM X 500 MM MOC SS 304 Make-

NSI Item- Pool-2 Sets of 150 gms/hr ozonator or 1 set of 250 gms/hr with SS 316 Venturi, booster pump , ozontor panel.

NSI Item- Pool under water light 12 W LED niche type made of SS material size 125 MM Plate with 88 mm dia and 80 depth design with LED lights voltage 12 Volts with driver water seal gasket complete in all respect including water proof multi strand copper conductor cable of 2,5 sqmm 2 core with flexible conduit complete

NSI Item- Junction size 100 mm x 100 mm square type with water proof covering made of ABS plastic material & Flexible conduit.

NSI Item- Supply of Electrical accessories- Cabling for filter feed pump Cabling for under water lights Cabling for ozonator booster pump & ozonator unit Cabling for dosing pumps

NSI Item- Electrical - MCC Panel- Seven tank process powder coated, front and back door bus bar chambers, cable Galleries compartmentalized for each out going.Sheet thickness 2.0 mm thick CRCA Confirm, indoor type Degree of Protection-IP 54, Cable entry- Top Incomer-1 no.- Incomer shall consist of following components.-LED Type Indicator a. FPMCCB 250amps 1 no Incomer and FPMCCBs 100 amps 5 nos for pumps b. FASD Starters with Single phase preventer 5 nos. c. CTs-1 no. (tape wound) d. Ammeter 1 no. e. Voltmeter 1 no. f. Supply ON indication lamps -3 nos. (RYB) Individual feeder shall consist of following components: SDF Fuselink for outgoing feeder

NSI Item- Supplying PVC pipes & plumbing acc. 1) MS- Pipe 150 mm dia from main pool drain to balancing tank-operated through spindle valve .x 2nos 2) MS- Pipe 250 mm dia from balancing tank to strainer to 3) MS- Pipe 450 mm dia from strainer to suction header line to pump suction. 4) MS-Pipe 200 mm dia from pump delivery to header line 5) 10 kg/cm2 PVC Pipe 200 mm dia from pump header line to filter-inlet /out let/ drain 6) 10 kg/cm2 PVC Pipe 100 mm dia from filter -inlet to pool 7) 10 kg/cm2 PVC Pipe 63 mm dia from pool header line to floor inlet 8) 6.0 kg/cm2 PVC Pipe 250 mm dia from overflow channel to balancing tank.-4 lines. Flow Control Valves, Non Return Valves and Strainers.

NSI Item- Provision of suitable size of RCC pedestal/foundation for installation of above Genset, as per the recommendations of Genset supplier, complete with material and labour, as required. Job 4 3,92,004.55 15,68,018.20

NSI Item- Provision of LT, XLPE insulated, Aluminium conductor Armoured cable of 3.5Cx240 sqmm from Genset to 'HMDB'. Note : The work includes laying, clamping and fixing of above cables, to be routed on suitable clamps/tray inside covered cable trench and sufficient spare length shall be provided at suitable location while OFC shall be clamped on surface or directly buried in the ground.

NSI Item- Cable termination using suitable lugs, glands, connectors (as applicable) for cables and all other required work as per site condition, as above.

NSI Item- Construction of suitable size of cable trench, provision of FRP cover and FRP open type cable tray/gratings/clamps, as per site conditions.

NSI Item- Provision of GI Plate Earthing, 600x600x6mm GI plate complete with masonry chamber cover, civil work, charcoal, salt, etc. Including excavation, backfilling, as required.

NSI Item- Supply, fixing of following size GI earth strips on surface or /in ground at 800mm below ground level including excavation, refilling, and making connections, etc., as required including riveting, nut bolts, washers, welding, bitumen, GI Spacers, saddles, etc. all other fixing accessories making connections with equipment /earth station, etc., as required

NSI Item- 50mm x 6 mm GI strip (For LBD)

NSI Item- 25mm x 3mm GI strip

NSI Item- Supply, Installation on overhead structure (c/w provision of appropriate mounting hardware/clamps), Testing, Commissioning and Aiming of integral LED Fixture, set up for external SPD of 10kV, complete with drivers. The System wattage of the offered luminaire shall generally be between 140W to 200W as per the proposed lighting design to achieve lighting level and other performance requirements set out in applicable guidelines without any exception. Overall system efficacy of the offered floodlight shall not be less than 100 lumens/watt at CRI not less than 90 @ 40 deg C. Lumen maintenance shall conform to L70B50-50000hours @Ta 35 deg C. The CCT of Floodlight shall be 5700K with CRI not less than 90, Degree of Protection shall be IP66 and Impact Resistance as IK08. Design consideration for Lighting Levels and Uniformities, as calculated over design surface shall be as per attached lighting simulation. Luminaires- Supply installation Testing & Comissioning of 200W LED Luminaire make Osram, Philips, Ventura-USL. (Lux level design achieve as per norms of National Games which must be vetted by IIT or equivalent institute.)

NSI Item- Design, Supply, Installation, testing & Commissioning of Lighting Distribution Boards (MLDB) installed inside Badminton/Basketball Hall and MP hall, as described below :- Wall mounted 'Indoor' type Factory built switchgear assembly, single front construction, with degree of protection as IP 54, dust and vermin proof, fabricated out of 14/16 gauge CRCA sheet steel. Having provision for cable entry from top / bottom with removable gland plates. Powder coated & pre-treated in Eight Tank process. Pre Wired and ready to install at site. Suitable for 415 Volts, 3 Phase, 4 Wire, 50 HZ Supply. Incoming Section- 1 No. MCCB I/C Feeder, comprising of 63A, 36KA FP, MCCB with Thermal Magnetic Release Based for O\C and S\C protection, Spreader Links & Extended ROH for 63A, 36KA FP, MCCB, Phase indication light LED type, Control MCB SP 6A, 10KA and Neutral Link. Outgoing Section- Configured in 3 sections, each distributing power to 24 nos. MCB outgoing feeders and outgoing shall consist of 16A DP MCB 10KA, Set of Terminal rated for 16A and suitable to receive up to 2.5 sqmm copper cable. Other Accessories- LDB shall be provided with standard accessories, such as name plates, earth bus/Terminals, ferrules and markings, etc.

NSI Item- Cabling, Terminations and Associated Works Provision of LT, XLPE insulated, Copper conductor 'Armoured' cable of 3Cx2.5 sqmm from 'LDB' to LED lights.

NSI Item- Provision of LT, XLPE insulated, Aluminium conductor Armoured cable of 4Cx35 sqmm from 'MLDB' to individual 'LDBs'. Note : The work includes laying, clamping and fixing of above cables, to be routed on suitable clamps/tray on surface and sufficient spare length shall be provided at suitable location. Important : Additional cross structure, as proposed for lighting installation and cabling, etc. is excluded from the scope of this estimates and suitable provisions for the same need to be made in the overall estimates to complete the installation.

NSI Item- Cable termination using suitable lugs, glands, connectors (as applicable) for cables, as above.

NSI Item- Provision of suitable size(s) of closed FRP cable trays/gratings/clamps c/w securing fasteners and hangers, as per the requirements of site conditions.

NSI Item- Supply & Installation of the following CCTV survillience equipments complete with all necessary accessories

NSI Item- Dome IP Camera- 2.0 MP Outdoor

NSI Item- IP Bullet Camera 2.0 MP Outdoor

NSI Item- IP PTZ 4k Camera 8 MP Outdoor

NSI Item- 64 Channel NVR with Hard Disk

NSI Item- MEDIA CONVERTER MULTI with fittings Cat 6 Cable, Fiber Patch code & other fittingsm 4 Port Switch, Power Supply, Device Safty Box and fittings, mounting Poles and accessories

NSI Item- 5.5 inch Smart LED Monitor

NSI Item- Publicf Address System Supply & Installation of the following Public Addresss equipments complete with all necessary accessories:

NSI Item- IP/PA Horn Speaker, Mounting Accessories Bracket (for Speaker), Communication Connectors & Accessories

NSI Item- Software based management application with desktop calling software

NSI Item- Gateways/Routers

NSI Item- Design, Supply, Installation, testing & Commissioning of Lighting Distribution Boards (MLDB) installed inside Badminton/Basketball Hall and MP hall, as described below :-Wall mounted 'Indoor' type Factory built switchgear assembly, single front construction, with degree of protection as IP 54, dust and vermin proof, fabricated out of 14/16 gauge CRCA sheet steel.Having provision for cable entry from top / bottom with removable gland plates. Powder coated & pre-treated in Eight Tank process. Pre Wired and ready to install at site. Suitable for 415 Volts, 3 Phase, 4 Wire, 50 HZ Supply. Incoming Section-1 No. MCCB I/C Feeder, comprising of 63A, 36KA FP, MCCB with Thermal Magnetic Release Based for O\C and S\C protection, Spreader Links & Extended ROH for 63A, 36KA FP, MCCB, Phase indication light LED type, Control MCB SP 6A, 10KA and Neutral Link. Outgoing Section- Configured in 3 sections, each distributing power to 15 nos. MCB outgoing feeders and outgoing shall consist of 16A DP MCB 10KA, Set of Terminal rated for 16A and suitable to receive up to 2.5 sqmm copper cable. Other Accessories- LDB shall be provided with standard accessories, such as name plates, earth bus/Terminals, ferrules and markings, etc.

NSI Item- Supply, Installation on existing RCC pedestal, testing and Commissioning of Silent Genset of 62.5kVA 'Prime' rating, complete with day tank, residential silencer, AV mounting pads, Manual Control Unit, Cable Box and all standard accessories, as required for satisfactory operation of the Genset on standalone basis.

NSI Item- Provision of suitable size of RCC pedestal/foundation for installation of above Genset, as per the recommendations of Genset supplier, complete with material and labour, as required.

NSI Item- Cabling, Terminations and Associated Works Provision of LT, XLPE insulated, Aluminium conductor Armoured cable of 3.5Cx120 sqmm from Silent Genset to 'MLDB'.

NSI Item- Cable termination using suitable lugs, glands, connectors (as applicable) for cables, as above.

NSI Item- Provision of suitable size(s) of closed FRP cable trays/gratings/clamps c/w securing fasteners and hangers, as per the requirements of site conditions.

NSI Item- Supply, Installation and Commission of 20Mtr height, raising and lowering type Lantern Carriage with integral power tool suitable for 10Nos of luminaires, the high mast shaft shall be in two/three section including assembly of the mast and head frame with all internal consitment as pulley, rope, integral power tool, aviation abstrusion lamp etc, on existing cement concrete foundation / pedestal as required including all installation tools, rope, crane etc. (Suitable for 50m/s wind speed). M24 x 850 mm long EN-8 grade foundation bolt along with nuts & washers - 06 Sets. Trailing Cable Shall be 5cx4Sq.mm PVC insulated only - 1 runs, 12mm thick Anchor plate & 3mm thick Template - 01 Sets.

NSI Item- Erection of the Mast and fixing of bracket Making of Civil foundation for 20Mtr Mast, which includes Excavation of Earth, shuttering, bar bending, concreting, vibrator to the concreating during casting, curing, back filling the same as per the below mentioned Grade of concrete - M20 Vibrated Grade of Steel - Fe500 Presumed Soil bearing capacity - 10 T/Sq.mtr Foundation design wind speed - 50M/s

NSI Item- Supply of Outdoor type cubical feeder pillar IP:54, rated for 415 volts 3 Phase 4 wire system. Duly Compartmentalized Panel board of suitable size not less than 30 cm and upto 45 cm deep made out of M.S. sheet (16 SWG) having door with locking arrangement for protection from rain, dust. and having following accessories mouted inside the cubical panel i/c connection, inter connection with aluminium thimbles, earthing with one nos. earth struds and the Whole panel powder coated. Mounting Arrangement : MS angle iron frame work of size 50mm x 50mm x6mm (NS) 120 cm long legs out of which 60 cm for duly grouting in cement concrete 1:2:4 (1 cement : 2 sand :4 stone aggrete 20mm). duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as required.50A, 4P, 35KA, Ics=100% Icu, MCCB - 1 No. as Incomer.32A, 1P, D-Curve MCB - 4 Nos. as outgoing.Spreader Terminals for MCCB Incoming Ternimal block - 1 Set (Suitable to terminate 4cx50 sq.mm Al.ArCable) Outgoing 3Pole 63A Ternimal block - 4 Set (Suitable to terminate 4cx25 sq.mm Al.Ar Cable) Indication lamps (RYB) with control MCB - 03 Sets. Danger notice plate in English and Local language

NSI Item- Cabling, Terminations and Associated Works Supply & laying of following sizes 1.1kV XLPE insulated PVC Sheathed Multi Stranded Flexible Copper cable. 3C X 1.5 Sq.mm

NSI Item- Supply & laying of following sizes 1.1kV XLPE insulated Aluminium Conductor armoured cable.

4C X 25 Sq.mm Ar. Aluminium

3.5C X 50 Sq.mm Ar. Aluminium

NSI Item- Supply & Making end termination of following sizes 1.1kV XLPE insulated Al.Conductor armoured cable with lugs.

NSI Item- 1.1kV XLPE insulated PVC Sheathed Multi Stranded Flexible Copper cable.3C X 1.5 Sq.mm

1.1kV XLPE insulated Aluminium Conductor armoured cable. 4C X 10 / 16 / 25 Sq.mm Ar. Aluminium

1.1kV XLPE insulated Aluminium Conductor armoured cable. 3.5C X 50 Sq.mm Ar. Aluminium

NSI Item- Supply & Making Cable glanding of following sizes 1.1kV XLPE insulated Al.Conductor armoured cable with glands.

4C X 10 / 16 / 25 Sq.mm Ar. Aluminium

3.5C X 50 Sq.mm Ar. Aluminium

NSI Item- Making of cable trench of 750mm depth and 300 mm wide in soft/semi soft soil and laying of cable in the trench. The bottom of the cable shall rest on the trench bed and the trench will be back-filled with excavated earth.

NSI Item- Supply and Making of Eathing with GI earth pipe 2.5 Mtr. Long x 40mm dia i/c accessories and interconnections, providing masonary enclosure with cover plate, with salt & charcoal etc. as required.

NSI Item- Supply & running of 1 runs of 25x3mm GI Flat for earthing as required.

ACE ENGINEERS BUREAU