SPL REPAIR OF BLDG NO.- 1192 (COOK HOUSE) AND RENOVATION OF DAMAGED ROAD AT PM SHRI KV UNDER GE (A) NO.1 JODHPUR.

Amount

Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land, complete all as specified and as directed.

Demolition of Cement concrete (including cutting of reinforcement if any) in any description and any position not otherwise specifically provided for and removing debris out of MOD land, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc complete all as specified and as directed.

M&L for 15-18mm thick Udaipur green marble machine cut in cooking platform laid over 10mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and rounding the edges , complete all as specified and as directed.

M&L for 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc , complete all as specified and as directed.

M&L for ceramic tiles 9-10 mm thick light shed (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) all as specified and as directed by Engr -in-charge.

M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) ,complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8mm tk (Square/Rectangular) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including over 15 mm thick screed bed or bedding layers in CM (1:6) for laying in floors finishing ,complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the flooring including 15mm thick screed bed in CM (1:6) including rubbing and mirror polishing complete all as specified and as directed by Engr -in-charge.

M&L for 20-25 mm thick machine cut KOTA stone slab riser of step , skirting, dado etc(Single piece for steps), machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing all as specified including backing coat of 10mm thick in CM (1:4) , complete all as specified and as directed.

Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water, complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement , complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth , complete all as specified and as directed.

Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar , complete all as specified and as directed.

M&L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 , complete all as specified and as directed.

M&L for three coats of white wash including preparation of new/old surfaces on walls , complete all as specified and as directed.

M&L for three coats of white wash including preparation of new/old surfaces as on ceilings , complete all as specified and as directed.

M&L for preparation of old surfaces of wall including complete removal of existing treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying two coat of oil bound distemper over one coat of primer , complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coat of oil bound distemper over a coat of 2 mm thick Birla/JK wall care putty on wall, complete all as specified and as directed.

M&L for one coat of white wash including preparation of old surfaces as on ceilings , complete all as specified and as directed.

M&L for two coat of cement based paint on newly/ plastered/ unplastered surfaces on wall & including preparation, complete all as specified and as directed.

M&L for one coat cement based paint on old plastered/ unplastered surfaces of wall & including preparation, complete all as specified and as directed.

Taking down chowkat with shutters (without taking off shutter from frame) size area n.exc1.50 sqm each, complete all as specified and as directed.

Taking down chowkat with shutters (without taking off shutter from frame) size area exc 1.5sqm but n.exc4.0 sqm each, complete all as specified and as directed.

M&L for preparation of new/old surfaces of wall including complete removal of interior treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying Two coats of 100% Premium acrylic emulsion paint weather proof (plastic paint) and including priming coat of interior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.

M&L for pressed steel door frames (105X60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, PCC etc, complete all as specified and as directed.

M&L for pressed steel door frames (165X60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, PCC etc, complete all as specified and directed

M&L for 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides if one face is covered with decorative face veneer with lipping/frame to match, complete all as specified and as directed.

S &F of factory made 40mm thick 2nd classhard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed by Engr -in- Charge.

S&F 40mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009section 8 clause 8.24 (a) and as directed.

S&F aluminium extruded section door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

S&F 12 mm thick toughened glass as in door/window or partition complete including design etching work /sun control film as directed and all necessary stainless steel fittings arrangement like hinges, clips, handle etc, complete all as specified and as directed.

S&F stainless steel body bottom floor spring machine screwed suitable for glass door complete all as specified and as directed

S&F in repair double action floor spring hydraulically regulated made of aluminium 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty.including fixing of broken tile, complete all as specified and directed.

M&L for fabrication of powder coated aluminium frame work as in frames for aluminium windows with or without rebate or for sliding windows(two track/three track ) , ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets for securing Jallies etc & the likes complete all as per sample kept in GE Office & fixed in position complete all as directed Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately, complete all as specified and directed.

M&L for Pre powder coated aluminium window shutters prepared for sliding or hanging etc including handles, tower bolt and hinges complete using section weighing 0.55 kg/RM including necessary joinng cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.,complete all as directed & specified

M&L for Pre powder coated aluminium door shutters using section weighing 0.55 kg/RM including necessary joinng cleats, glazing clips, rubber packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc, complete all as specified and directed.

M&L for Pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators, complete all as specified and directed.

S&F PVC door seal fixed at door to cover the gap between floor and door, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in bed block for hold fast, Kerb stone, including necessary form work , complete all as specified and directed.

Taking down of steel window and ventilators, complete all as specified and directed.

S&F factory made box type windows (steel) (BWM) with side hung shutter with coolar opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded. Note.:Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same. (ii) Glass panes & wire cloth shall be measured and paid separatly.

All as per item No. 43.00 here in above but without glazing bars.

S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded,complete all as specified & directed. Note.:Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same. (ii) Glass panes & wire cloth shall be measured and paid separatly.

All as per item No. 45.00 here in above but without glazing bars.

S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and directed.

S&F of box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, complete all as specified and directed.

Supply and fabrication of Mild steel guard bars, grills, grating, and similar work and welded to window frames, door frames (made up of angle), balcony railing confirming to FE 290, gde E-165 etc , complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm , complete all as specified and directed.

M&L for stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc, complete all as specified and directed.

S&F of stainless steel butt hinges medium weight, cold rolled of size 100 mm size., complete all as specified and directed.

S&F Anodised Aluminium handles 150 mm size D type with plate , complete all as specified and directed.

S&F Anodised aluminium barrel tower bolts, 150 mm size stove enamelled black, with bright bolt and fixed, complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet,cast orextruded sections& fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F 150mm double action spring hinge, brass with phosphor bronze wire spring bright polished , complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,with single shoes double shoes fixed in floor Overall length of cover plate 140mm , complete all as specified and directed.

Hacking out old broken glass (any thickness , size , quality or description ) from metal frame incld punching or drilling out old glazing pins /spring clips and provding and fixing new ones, complete all as specified and directed.

S&F 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane, complete all as specified and directed.

S&F 4 mm thick figurred , pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane, complete all as specified and directed.

S&F 4.80 mm thick plain Sheet glass/ tinted or coloured film as required, ordinary quality and glazing withsecured in wooden beads or snap fit glazinng clips square exc 0.5 sq. m in each pane, complete all as specified and directed.

S&F in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end , complete all as specified and directed.

M&L for 7.5cms thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4,, complete all as specified and directed.

M&L for preparation of the new surfaces of steel & applying two coats of synthetic enamel paint over one coat of red oxide primer over 10Cm width or girth all as specified.

M&L for two coat of synthetic enamel paint over a coat of pink primer on new wooden surface including preparation of surface, over 10Cm width or girth , complete all as specified and directed.

Taking up or down GI steel /CPVC water tubing 15/20 mm bore and connection, including cleaning for refixing or remove to site, complete all as specified and directed.

Taking up or down GI tubing/CPVC 25 mm bore and connection, including cleaning for refixing or remove to site, complete all as specified and directed.

S&F CPVC tubing having outer dia 20mm SDR-11 Including all fitting (eblow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid to floor , complete all as specified and directed.

S&F CPVC tubing having outer dia 25mm SDR-11 Including all fitting (eblow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid to floor , complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and directed.

S&F in repair of bibcock 15mm dia, cast copper alloy fancy type, long body screwed for iron pipe or for brass ferrule , complete all as specified and directed.

S&F in repairs angular stop valves cast copper alloy chromium plated(ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union , complete all as specified and directed.

S&F stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 20/ 25mm bore of iron pipe or union and fixed in repair , complete all as specified and directed.

S&F pillar taps 15mm bore , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe , complete all as specified and directed.

S&F in repair 15 mm bore fancy type sink cock (wall mounted) with 150mm (6") long swivel spout, wall flange and provision for WP connection, cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.complete all as specified and directed.

S&F in repairs Stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as directed incl taking out & removal of old sink arrangement .

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repairs light coloured (Ivory) vitreous china, wash hand basin of size 550mm X 400mm flat back with pedestal Including bracket , CP waste coupling ,chain and plug, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC Waste coupling & flexible waste pipe , complete all as specified and directed.

M&L for 75mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate.

M&L for 110mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate, complete all as specified and directed.

Dismentaling of cast iron/pvc soil waste & vent pipes 100/110 mm dia incl all fittings etc , complete all as specified and directed.

Dismentaling of cast iron/pvc soil waste & vent pipes 75 mm dia incl all fittings etc , complete all as specified and directed.

Supplying and laying of 75 mm dia PVC pipes SWR laid in trenches , complete all as specified and directed.

Supplying and laying of 110 mm dia PVC pipes SWR & Plain PVC fittings Laid in trenches , complete all as specified and directed.

Supplying and laying of 75 mm dia PVC pipes SWR fittings on walls / ceiling or laying in floors , complete all as specified and directed.

Supplying and laying of 110 mm dia PVC pipes SWR fixed to walls / ceiling or laying in floors , complete all as specified and directed.

S&F 75 mm bore PVC bends any radius with oval acess door, complete all as specified and directed.

S&F 110 mm bore PVC bends any radius with oval acess door, complete all as specified and directed.

S&F 32/40mm bore low or high density polyethylene waste pipes (LDPE) of pressure rating 10Kg/Sqm fixed complete to walls, ceiling or floors etc , complete all as specified and directed.

S&F in repair 15mm bore PVC connection (for Flushing cistern) 600mm long best quality with PTMT nuts complete all as specified and directed.

M&L 40 mm thick PCC (1:2:4) type B1 using (20mm graded stone aggregate) as in floor , hard standing flooring finished even and smooth without using extra cement, complete all as specified and directed.

M&L for laying 40-50 mm thick Machine cut sand stone slabs as in plinth protections laid over 20 mm thick cement sand screed in CM1:4 over 50 mm thick PCC all as specified and directed incl filling the joints of sand stone slabs with neat cement mixed with pigment to match the shade of slabs., complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wid (120mm thick of roof slab), complete all as specified and directed.

M&L for design mix M -25 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves , complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces , complete all as specified and directed.

M&L for design mix M -25 as beam, roof beam, cantilevers, lintel beam, etc. complete all as specified and as directed by Engr-in-Eharge.

M&L for HYSD steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for column,beams, Roof, complete all as specified and directed.

M&L for HYSD steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Supply and fabrication of Mild steel soft drawn binding or tying wire 1 mm dia, annealed, complete all as specified and directed.

Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land, complete all as specified and directed.

M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.

M&L for plain cement concrete 1:2:4 type B-0 (using 12.50mm graded stone agg) over roof for making good depression/undulation and as in roof kerb to match the existing, complete all as specified and directed.

Dismantling existing water tank of capacity exceeding 500ltrs and not exc 1000 ltrs and removing from site, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) white, hoisted and fixed in position all as directed of capacity 1000 ltrs a Including 20mm bore brass ball valve high pressure with polythene float , complete all as specified and directed.

Supply only integral water proofing compound (ISI marked), complete all as specified and directed.

Demolition of stone masonry /block walling built in cement mortar, complete all as specified and directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6 , complete all as specified and directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and directed.

M&L for precast cement concrete solid building blocks type B1 1:2:4 (20mm graded stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:4 cement mortar, complete, in walls, complete all as specified and directed.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc , complete all as specified and directed.

M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of RUSTOFF to remove the loose rust particles etc & throughly cleaning the surface., complete all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement on ceiling , complete all as specified and directed.

S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc., complete all as specified and directed.

S&F MS chromium plated peg set of five fixing with wall , complete all as specified and directed.

M&L writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint , complete all as specified and directed.

Supply & laying jointing and testing 150mm bore reinforced cement concrete pipes class NP-2 laid and jointed in cement mortor 1:1 complete, with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed.

M&L for cement concret (1:3:6) type C-2, using 40mm graded stone aggregate bed to drain pipe 150 mm dia including packing under and hunching against the pipe after they are laid including necessary formwork , complete all as specified and directed.

M&L for fixing TMT bar 12 mm dia by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc., complete all as specified and as directed by Engr-in-Charge.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, cooler stand, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L in repair for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc , complete all as specified and directed. ( Taking down of existing Cupboard /Almirah included in the rates)

S&F of 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board,anti fungal,moisture resistence,anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and directed by Engg-in-charge.

S&F of 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal,moisture resistence,anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading etc. complete all as specified and directed by Engr-in-charge.

S&F in repairs of Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver complete all as specified and directed by Engg-in-charge.

S&F in repairs of stainless steel cabinet / drawers handle having a length of 250mm and shape complete all as specified and directed.

M&L for 75 mm thick Cement concrete type D - 2,1:4:8 (40 mm graded agg) as in sub base to floors incl well compacting & laid to levels , complete all as specified and directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying if inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M&L machine made precast cement concrete Kerb stone blocks of approved shape size using Cement concrete 1:3:6 type C1 (20mm stone agg) laid alongside paths /hardstanding jointed & pointed in CM 1:4 , complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil,complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5mtr depth and getting out in any type soil ,complete all as specified and directed.

Returning filling in,including spreading,levelling,watering and well ramming in layers n exc 25cm in soil ,complete all as specified and directed.

Removing excavated soil n.exc 50mtr and depositing where directed at a level n exc 1.5 mtr above the starting point,complete all as specified and directed.

Hardcore of guage n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface,complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: (a)-For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, , complete all as specified and as directed. Note : Stainless steel butt hinges and necessary SS screws shall be measured & paid separately.

S&F vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with, integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M&L Concealed Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm, single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with galvanised steel sunken/concealed PIANO TYPE box (with earth dolly), with curvy PIANO TYPE cover plate for fixing of PIANO TYPE switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .

All as per item No. 139.00 here-in-above, but One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch, complete all as specified and directed.

All as per item No. 139.00 here-in-above, but One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch, complete all as specified and directed.

All as per srl item no.139.00 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point, complete all as specified and directed.

S&F in replacement of piano switch flush type single pole one way 6 Amp ISI Marked, complete all as specified and directed.

S&F in replacement of piano switch flush type single pole one way 16 Amp ISI Marked, complete all as specified and directed.

S&F in replacement of piano socket outlet 2 in 1, 5 pin, 6 Amp, 230 Volts flush type, complete all as specified and directed.

S&F in replacement of piano socket outlet 2 in 1, 6 pin, 5 and 16 amp flush type, 230 Volts ISI Marked, complete all as specified and directed.

S&F in replacement of piano socketed stepped type electonic fan regulator flush type ISI Marked, complete all as specified and directed.

S&F in replacement of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed.

S&F in replacement of LED lamp 9W complete all as specified and directed by the Engineer-in-Charge.

S&F in replacement of ceiling rose, three terminals, bakelite body, 230 volts, complete all as specified and directed.

S&F in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long complete all as specified and directed.

S&F in replacement of bldg security LED Light Luminaire of 30 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable complete all as specified and directed.

S&F in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down fan, ceiling cable end, dismantling blades and removing fan and blades, deposit to MES store yard , complete all as specified and directed.

S&F in replacement of electric storage water heater of capacity 25 litres BEE 5 star rated including proper installing arrangment on wall surface with suitable Anchor bolt fatser and Geyser connections for hot and cold water supply made of stainless steel wire braided connrtector with chrome finish heavy duty nuts of 15mm size with suitable lengh etc., complete all as specified and directed.

S&F in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed by Engineer-in-Charge. Note: (i) Rate are deemed to be included in the quoated rate for Celing fan hook of length as site reuirement /faster of size 12 mm dai and 10 cm in length

S&F Heavy duty Exhaust fan 300 mm sweep, 900 RPM, including louvers with cutting chases on brick wall and grounting with nut bolts complete all as specified and directed by Engr-in-charge.

S&F in replacement of MCB, B Curve type, 10 kA, 63Amp, SPN with over load and short circuit protection, complete all as specified and directed.

S&F in replacement of MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specified and directed.

S&F in replacement of sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete all as specified and directed by Engr-in-charge.

S&F in replacement of sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. Note:- Two run of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces.

Supply, laying testing in trenches LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 25.0 sqmm 3.5 core, complete all as specified and directed. Note : Earth work and brick work measured and paid separately

M&L for Earthing complete in repair with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead, galvanised iron or steel complete with 40 mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test piont etc. in and including light grade GI protection pipe 40mm bore up to 5m lenght for drawing in earth lead wire , all as shown in electrical plate No.3 of SSR Part-1 complete with necessary earth work in any type of soil, removal to a distance not exc. 50m, testing on completion complete all as specified & directed.

S&F MCB TPN 240 volts any rating from 40 to 100 amps, with rupturing capacity 10 KA, 'B' curve type, with over load and short circuit protection,complete all as specified & directed.

S&F MCB DB TPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 300x180mm x40 mm, complete all as specified and as directed.

M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand layer, complete all as specified and as directed. Note :- Punned thickness shall only be measured and paid.

M&L for galvanised steel tubing, medium grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings, of size 40 mm bore, complete all as specified and as directed.

S&F of sheet metal enclosure SPN with a two pin earth plug and socket with metal cladd top and one MCB,SP 20amps capacity ,complete all as specified & directed.

NOTE:- (i)- Quantities are clubbed in BOQ for different Jobs. For which ref. Annexure-I on Sl. page. No. 44 to 46 of tender document. (ii)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

Diva Infra

M/S KAUTILYA GARG

SN TECHNO CONSTRUCTIONS

RISHU CONSTRUCTION COMPANY

mahalaxmi enterprises

Narendra General Suppliers