CSIND-Construction of Lock Cum Bridge across Badagara -Mahe Canal at Moozhikkal in Kozhikode District -Mechanical Works.

Amount

Fabrication ,Supply & erection of MS & SS embedded parts( SS304 L) Gade with planing for wheel track and without planing for seal track and sill track) for 3 types of shutters

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od4610/2017_2018/MH : Supply of MS Bolts and Nuts

85.108 : Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied

od16411/2016_2017/MH : Fabrication, Supply, erection and assembling of wheel track, sill seat and seal track in correct position and alignment by welding SS Embedded parts in 304L Grade as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

Supply of materials, fabrication,painting and erection of 3 types of MS shutter

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.110 : Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.112 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350microns over the grit blasted and cleaned surface to class A standard of IS 14177 including cost of all materials , labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc complete as per the direction of departmental officer at site

85.111 : Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

od19134/2016_2017 : Supplying of SS Bolts and Nut with washer

Supplying and fixing of flat type rubber seal at the bottom side , angular type at outer and inner vertical side of 3 types of shutters (4Nos.))

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117 : Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Supplying and fixing 300 dia cast steel thrust roller assembly for Type 2 and Type 3 shutters, 564mm dia cast steel thrust rollers for lock gates (Type 1 shutters)

od16405/2016_2017/MH : Supplying and fixing cantilever type cast steel thrust roller assembly having OD 564mm ,ID 200 ,90mm tread width, SS(304) shaft L=345.5mm, spherical roller bearing (no:22222E) and self lubricating roller bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete

od5595/2017_2018/MH : Supplying and fixing cast steel thrust roller assembly having OD 300mm ID150, 90mm tread width, SS(304) shaft D=80 L =242 and 22214E self aligning spherical roller bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete

Supply of materials, fabrication,painting and erection of hoisting bridge for 3 types of shutter

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.103 : Supply of MS checquered plates including cost of conveyance charges

od16408/2016_2017/MH : Supply of 40mm GI pipe

od16406/2016_2017/MH : Supply of MS Bolts and Nuts

85.124 : Fabrication and supply of Hoisting bridge unit in structural steel confirming to IS2062Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc

od6878/2017_2018/MH : Painting the exposed surface of the hoist and supporting structure with two coats of synthetic enamel paint conforming to IS 2932 with minimum film thickness of 25+/-5 micron per each coat over one coat of of alkayed based micaceous iron oxide paint with minimum film thickness 65+/-5 micron over 2 coats of zinc phosphate primer with film thickness of 40+/-5micron per coat so that the film thickness of all coats including priming coat not les than 175 micron over grit blasting the surface to class B standard of IS14177 including cost of all material labour testing of paint, incidental charge, hire of Tand P

85.136 : Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Supplying, stacking, erecting and trial run of rope drum hoisting Unit having 30 T and 15 T capacity for type 1, Type 2 & Type3 shutters respectively including line shaft,wire rope, dial guage and all other accessories

od20919/2016_2017 : Supplying and stacking of 30 Tonne capacity rope drum hoisting unit having 13 m lift at a hoisting speed of about 0.79 m/min(+/-10%) through pulley arrangements with 4 numbers of falls on either side with 22mm tested ungalvanized wire rope 6/36 construction, fibre core having breaking capacity 28848Kg and driven by TEFC squirrel cage induction motor hoist duty type having capacity not less than 12.5HP and driven through self locking worm reducer and open gear reduction unit excluding the cost of line shaft but including 12 nos. of plummer blocks with bearings for line shaft supported at proper intervals and including cost of electro magnetic thruster brake assembly manual operating systems, as per drawings specifications and statutory requirements etc complete but excluding cost of wire rope

85.128 : Providing Line shaft ,material : MS rolled/ forged steel

od16410/2016_2017/MH : Cost of supplying and stacking 20mm tested ungalvanised steel wire rope 6/36 construction, fibre core having breaking capacity 23853Kg tensile designation of 1770 confirming to IS2266-2002

85.125 : Conveying and erecting in position the already supplied rope drum hoisting units (15T/ 20T/25T/30T) capacity on the hoisting bridge and correcting the alignment as far as possible manually as per the direction of departmental officer at site including cost of all labour, machinery, lead and lift and all incidental and conveyance charges etc complete

85.135 : Conveying and Fixing wire rope already supplied to the new gates and Hoisting unit safely and conducting Trial run

od16412/2016_2017/MH : Providing Dial guage assembly with with Dial, 1 5/8 feet worm reducer, chain & Sprockets, Frame and other accessories.

od3502/2021_2022/MH : Cost of supplying and stacking 22mm tested ungalvanised steel wire rope 6/36 construction, fibre core having breaking capacity 28848 Kg tensile designation of 1770 kg/cm2 confirming to IS2266-2002

od3513/2021_2022/MH : Supplying and stacking of 15 Tonne capacity rope drum hoisting unit having 6 m lift at a hoisting speed of about 0.50 m/min(+/-10%) through pulley arrangements with two numbers of falls on either side with 20mm tested ungalvanized wire rope 6/36 construction, fibre core having breaking capacity 23853Kg and driven by TEFC squirrel cage induction motor hoist duty type having capacity not less than 3HP and driven through self locking worm reducer and open gear reduction unit excluding the cost of line shaft but including 12 nos. of plummer blocks with bearings for line shaft supported at proper intervals and including cost of electro magnetic thruster brake assembly manual operating systems, as per drawings specifications and statutory requirements etc complete but excluding cost of wire rope.

Dismounting and removing of existing shutter and hoisting mechanism for type 3

od5956/2017_2018/MH : Dismounting and removing the existing operating mechanisms supporting structure complete and safe keeping of same in the nearby bank cutting and removing the existing shutter complete and stacking at place away from site as per the direction of Departmental officers at site

civil works for Type3 shutters grooves and sill

4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Bidder Name

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY