DPR Funds RKVY 2025-26

Demolition including stacking of serviceable meterials and disposal of unserviceable materials within 100 metres lead for RCC work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Demolition including stacking of serviceable meterials and disposal of unserviceable materials within 100 metres lead for Brick work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Demolition doors, windows and clear storey windows, ventilators etc., (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc. complete and stacking them within 100 metre lead Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Augoring and boring of holes in site and under reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with augoring and boring equipment as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of different diameter , inclding VRCC M- 25 Designl mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges , seigniorage charges for finished item of work, including centering, shuttering, including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Pile caps

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Plinth beam

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Columns

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Mid landing Beams

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Stair case slab 150mm thick

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Roof beams

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Roof slab 125mm thick

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Roof slab 100mm thick

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Lintels

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Sunshades

Providing High Yield Strength Deformed(HYSD) steel bars (Fe.500-d) as per IS 1786-1985) of 8mm to 20mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved designes and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wirre, cover blocks, hairs,overlaps, spacers, dowels, wastage etc. and all operational, incidental, and labour charges such as cutting, bending,placing in position, tying etc. complete including overhead charges and contractor's profit @13.615% but excluding GST.

Filling with sand in trenches, sides of foundations with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges etc.,complete for finished item of work (APSS NO.309&310) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Basement

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Superstructure walls

Plastering with CM (1:5) 12 mm thick including cost and conveyance of all materials and all labour charges etc., complete including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST. For superstructure

Ornamental Plastering with CM (1:5) 8 mm thick including cost and conveyance of all materials and all labour charges etc., complete including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST. For Super structure

Supply and Fixing of Doors as per approved drawings with Best Teak Wood Frame Section 100mm x 75 mm and ISI marked Teak Wood Shutters Fully Panelled Doors including supply and fixing including fixing the Brass fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (Door of Size 1.20mts x 2.10 mts. Double Shutter) including Over Heads & Contractor's Profit but excluding GST.

Supply and fixing of Flush Door shutter of size 1.05 x 2.10mt with block board type with teak veneer on one face and commercial ply on another face-30 mm thick (conforming to IS:2202 of shubdwara), with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges including Overheads & Cotractors Profit @13.615% etc. complete as per specifications, but excluding GST (APSS NO.1001 & 1002)

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water,tiles, but excluding cost and conveyance of all materials etc., complete for finished item of work including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Providing Skirting to Internal walls to 15 cm height / Risers of Steps with Vitrified Polished Tiles 8 to 10 mm thick, length equal to flooring tiles set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST .

Flooring with Ceramic Tiles set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Supply & Fixing of M.S Grills to Doors, Windows ladder and Compound Wall Gates etc using M.S Flats,M.S Square Rods, M.S Pipes including Cost and Conveyance of All Materials including Welding,Fabrcation and Fixing chares etc Complete as per the directions of the Engineering Incharge including Overhead charges and Contractor's profit @13.615% but excluding GST.

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove, including Overhead charges and Contractor's profit @13.615% but excluding GST.

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST - for Internal walls

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST for external walls

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Columns

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Mid landing beams

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Stair case Slab 150mm thick

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Roof beams

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Roof slab 125mm thick

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Lintels

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Roof Sunshades

Providing High Yield Strength Deformed(HYSD) steel bars (Fe.500-d) as per IS 1786-1985) of 8mm to 20mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved designes and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wirre, cover blocks, hairs,overlaps, spacers, dowels, wastage etc. and all operational, incidental, and labour charges such as cutting, bending,placing in position, tying etc. complete including overhead charges and contractor's profit @13.615% but excluding GST.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab including Overhead charges & Contractor's Profit @13.615% etc.complete but Excluding Seigniorage charges & GST

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Superstructure walls

Plastering with CM (1:5) 12 mm thick including cost and conveyance of all materials and all labour charges etc., complete including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST. For superstructure

Ornamental Plastering with CM (1:5) 8 mm thick including cost and conveyance of all materials and all labour charges etc., complete including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST. For Super structure

Supply and Fixing of Doors as per approved drawings with Best Teak Wood Frame Section 100mm x 75 mm and ISI marked Teak Wood Shutters Fully Panelled Doors including supply and fixing including fixing the Brass fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (Door of Size 1.20mts x 2.10 mts. Double Shutter) including Over Heads & Contractor's Profit but excluding GST.

Supply and fixing of Flush Door shutter of size 1.05 x 2.10mt with block board type with teak veneer on one face and commercial ply on another face-30 mm thick (conforming to IS:2202 of shubdwara), with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges including Overheads & Cotractors Profit @13.615% etc. complete as per specifications, but excluding GST (APSS NO.1001 & 1002)

Supply and fixing of 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19gauge thickness and size of 19mm x 19mm for stiles, &15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.M.S. frame shall be covered with 5mm thick heat mouldedPVC „C‟ channel of size 30 x 50mm forming stiles, and 5mmthick, 75mm wide PVC sheets for top rail, lock rail &bottomrail on either side, and 10mm (5mm x 2) thick, 20mm widecross PVC sheet as gap insert for top rail & bottom rail.Panelling of 5mm thick PVC sheet to be fitted in the M.S.frame welded / sealed to the stiles & rails with 30mm wide x5mm thick PVC sheet beading on either side, and joinedtogether with solvent cement adhesive etc. An additional5mm thick PVC strip of 20mm width is to be stuck on theinterior side of the „C‟ Channel using PVC solvent adhesive.Complete as per direction of Engineer-in-charge,manufacturer‟s specification & drawing for finished item ofwork Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water,tiles, but excluding cost and conveyance of all materials etc., complete for finished item of work including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Providing Skirting to Internal walls to 15 cm height / Risers of Steps with Vitrified Polished Tiles 8 to 10 mm thick, length equal to flooring tiles set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST .

Flooring with Ceramic Tiles set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete excluding seigniorage charges for finished item of work (APSS No.701 & 707), Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Supply & Fixing of M.S Grills to Doors, Windows ladder and Compound Wall Gates etc using M.S Flats,M.S Square Rods, M.S Pipes including Cost and Conveyance of All Materials including Welding,Fabrcation and Fixing chares etc Complete as per the directions of the Engineering Incharge including Overhead charges and Contractor's profit @13.615% but excluding GST.

Supply and Fixing of 25mm dia 1.80 mm thick (Medium type) P.V.C. pipe of make Sudhakar/Maco plast/Modi (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Supply and Fixing of 25mm dia 2.20 mm thick heavy type P.V.C. pipe of make Sudhakar/Maco plast/Modi (ISI MARK) concealed in Roof Slab with all required accessories including masonary work and labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant Low Smoke (FRLS) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, 1 way switch, GI metal box, front plate covering to switch, Ceiling rose including all labour charges etc. complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Makes of Wires : Finolex / R.R. Cable Makes of Switches : Legrand rteor/Schneider Zen celo/Hobewell Blenge plus, Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Supply and fixing of 6A 3/2 pin wall plug socket with 6A, 1way switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete Makes of Switches : Legrand Arteor/Schneider Zen celo/Honewell Blenge plus, Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding GST

Supply and fixing of 16A 3pin and 6A 3pin plug socket with shutter and 16A modular type switch with indicator, Galvanised hot deep box, cover frame including earth connections and all labour charges etc. complete Makes of Switches : Legrand Arteor/Schneider Zen celo/Honewell Blenge plus, Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Supplying & run of 2 of 36/0.3mm (2.5 Sqmm)FRLC PVC insulated flexible copper cable of makes GM/L&T/RPG/Havells/V-Guard/Powerflex/Polycab/Gold Medal/Standard/Million/Vimal/Sun cab/Paragon/Delton (ISI MARK) in existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Supplying & run of 2 of 56/0.3mm (4 Sqmm)FRLC PVC insulated flexible copper cable of makes GM/L&T/RPG/Havells/V-Guard/Powerflex/Polycab/Gold Medal/Standard/Million/Vimal/Sun cab/Paragon/Delton (ISI MARK) in existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Supply and run of 1 of 14/0.3mm (1.0 Sqmm) FR / FRLS PVC insulated flexible copper cable of makes GM/L&T/RPG/Havells/V-Guard/Powerflex/Polycab/Gold Medal/Standard/Million/Vimal/Sun cab/Paragon/Delton (ISI MARK) in existing pipe for earth continuity including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge. complete for finished item of work Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Supply and erection of 3 phase meter board with 18'x30' peeta board with 3 No 100A 7415 V fuse unit and 32A standard make switch disconnector fuse unit complete as directed by the Engineer in charge, including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Supply and fixing SPN 8 way Distribution board with IP-43 protection (Metal Door) suitable for single phase 40A DP Isolator as incomer and 8 Nos. 6-32A 10 kA SP MCBs (make Standard/Havells/HPL/Toyoma) as outing going including internal connections and labour charges for surface / flush mounting etc., complete Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc. complete for small quarters Including Overhead charges & Contractor's Profit @13.615% etc.complete but excluding GST

Supply, transportation & Fixing of 1200mm (48") sweep 230V, A.C 50 Hz. ceiling fan of make Crompton Decora/Bajaj G Gold/Havells Deco/Usha Striker/Orient PSPO with 3 blades and double ball bearings with all standard accessories and stepped type electronic regulator of makes Miltec/Vimal opel/Maru Mantero/Starex smile/CPL including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge complete for finished item of work Including Overhead Charges & Contractor's Profit @13.615% etc.complete but excluding GST

Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high pwer LEDs having system efficacy of >=100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Supply and transportation of 45W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120-270V AC, P.F > 0.90, high power LEDs having System Efficacy > 120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Including Overhead charges & Contracto'rs Profit @ 13.615% but excluding GST

Fixing of 40W street light luminaire to the wall with 1.0 Mtr., 25mm dia Gl pipe 4 bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated and 12.70mm dia. NP bib tap 400 grams Seiko or equivalent complete including cost and conveyance of all materials to site, for finished item of work for all floors including Overhead charges and Contractor's Profit @13.615% but excluding GST

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/ Esso or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work including Overhead charges and Contractor's Profit @13.615% but excluding GST

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing etc. complete for finished item of work including overhead charges and contractor's profit @ 13.615% but excluding GST - 22.20 mm OD Pipe.

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing etc. complete for finished item of work including overhead charges and contractor's profit @ 13.615% but excluding GST - 28.60 mm OD Pipe.

Supplying and fixing NP bib taps of size 12.70mm dia of Indian make Seiko or equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying and fixing of SWR PVC pipes of 75mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work (APSS No. 1302 1319 & 1326) including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying and fixing of SWR PVC pipes of 90mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work (APSS No. 1302 1319 & 1326) including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying and fixing of SWR PVC pipes of 110mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work (APSS No. 1302 1319 & 1326) including overhead charges and contractor's profit @ 13.615% but excluding GST.

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying & Fixing 76.20mm (3") Prince/ Sudhakar or Equivalantal PVC/SWR Nahany trap with Jali for all floors including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying & Fixing white glazed flat back half stall Urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for all floors. including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces etc., complete.for finished item of work including overhead charges and contractor's profit @ 13.615% but excluding GST.

Cost and Supply 900mm dia RCC Well Rings for Septic tank including overhead charges and contractor's profit @ 13.615% but excluding GST for Covers.

Cost and Supply 900mm dia RCC Well Covers for Septic tank including overhead charges and contractor's profit @ 13.615% but excluding GST.

Drilling of borewell by down the hole hammer with DTH rig to a finished dia of 112/165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation all consolidated formation etc., and reaming the bore to subinsertion of required casing pipe etc., Including insertion of casing pipe with couplings caps any other revaent materials upto required depth as directed by the department , transportation of drilling rigs and supporting vehicle and including bore development. flushing of borewell at an average pressure of 150 PSI conducting yield test Crew charges done to the satisfaction of the department and including all labour charges and all taxes , but excluding the cost of casing pipe etc., The entir work should be carried out as per IS 2800 Part I & II 1979 and 11189 of 1985 and amended from timt to time. RATE AS APPROVED BY DISTRICT COLLECTOR 2013-14 in RWS & S Dept. including overhead charges and contractor's profit @ 13.615% but excluding GST for 112mm dia bore well.

Cost supply of 140mm dia. PVC 6kg per sqmm class III for casing CSSR Sl.no 20 Pg 66 including all charges complete including overhead charges and contractor's profit @13.615% but excluding GST.

Supply of WPSC insulated 3 core 2.50 sqm flat copper cable CSSR including Overhead Charges and Contractor's Profit @13.615% but excluding GST.

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH/Crompton. complete., ELEC 5.4.15 including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supply and Transportation of ... 1.5HP.., 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 240V ± 10%, SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Pluga / Sterling / Falcon / Kumar / Unnati Zen/Duke/Lada/Ellen/Suguna/UNltek/KSP/Anco/8abar/Fitwell ELEC 5.4.2 including overhead charges and contractor's [email protected]% but excluding GST.

Manufacture, Supply, & Delivery of HDPE Pipes 50mm dia 16kg/sqcm conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) including overhead charges and contractor's profit @ 13.615% but excluding GST.