PROVN OF CERTAIN MINOR WORKS FOR 24 GUARDS AND ASCON NODE UNDER AGE I POKARAN

Amount

Excavation in post holes (or similar holes) each n exc 0.5cu .m,getting out in soft/loose soil, returning,filling in and ramming earth or broken rubble mixed with earth around,in layer not exceeding 25 cm,watering and removing surplus soil to a distance n exc 50 m and makinggood surface complete all as specified and as directed.

M&L for PCC 1:3:6 Type C2 (using 40 mm graded stone aggregate) in walls or retaining walls, any thickness size of shape including,pilasters, boundary pillars and posts (including post and bases complete all as specified and as directed.

S&F for MS work confirming to Fe-290 Gde E-165 as in post, strut, purlins & wind ties with (MS flat iron fillet, MS plate & angle iron) necessary cutting, drilling, welding, bolting or riveting etc including embeding in concrete complete to any type of posts screwed in position with nuts, bolts & washers, etc all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile streangth of 550 Mpa as in roof covering\ cladding to wall , fixed with self tapping screws as specified.

M&L for preparation of newly steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Excavation in trenches n.exc 1.5m deep and n.exc 1.5m wide ,etc. n getting out any type of Soil complete all as specified and directed by Engr-in-Charge.

Removal of excavated surplus soil to a distance n,exc 50m and depositing where complete all as specified and directed by Engr-in-Charge.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) of thickness 75 mm as in sub base complete all as specified and directed by Engr-in-Charge.

M&L for even spreading of 25mm thick layer of sand cushioning incl watering & consolidation all as specified and directed.

M&L for 80mm thick machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of M-35 Grade complete all as specified and directed.

Returning filling in soil including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc complete all as specified and directed by Engr-in-Charge.

M&L for PCC ( 1:4:8) Type D-2 using 40 mm graded aggregate as in fdn complete all as specified and directed by Engr-in-Charge.

M&L For Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed by Engr-in-Charge.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in sub bases complete all as specified and directed by Engr-in-Charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed by Engineer-in-Charge.

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 10 mm thick , plaster in cement mortar (1:4) on surfaces of ceiling and finishing the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge.

M&L preparation of new wall surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer,including one or more coat of wall care putty on wall complete all as specified and directed.

M&L for preparation of new plastered surfaces as in ceilings, applying 3 coats of white wash complete all as specified and directed by Engr-in-Charge.

Complete preparation new surfaces of walls and preparation of surfaces (external faces) of walls and applying two coats of external weather proof paint of Apex or equivalent over a coat of primer (self coat) complete all as per manufacturers instructions, complete all as per specified and directed.

M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete complete all as specified and as directed by the Engineer-in-Charge

M&L for PCC 1:2:4 type BO using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 25 to 85 mm as per the requirements all as directed by Engr-in-Charge.

M&L rendering 15mm thick in 1:4 cement plaster on roof surface by using WPC Compund and surface finished even and smooth complete all as specified and directed.

Supply only integral water proofing compound.(ISI Marked) complete all as specified and directed by Engr-in-Charge.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forced all as specified and as directed

S&F for Non- skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with screed bed 15 mm thick CM 1:6 complete all as specified & directed

M&L Glazed ceramic coloured tiles in vertical surface size 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering CM1:4 complete all as specified and directed.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per Engr - in - charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suplying & fixing in the frame at site as per directed by Engr - in- charge.

S&F stainless steel wire cloths 0.36mm nominal dia of wire and averaging width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F SS hinges, 100mm size and fixed complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 125mm complete all as specified and directed by Engr-in-Charge.

S&F Aluminium handles, cast type, anodised of size 150mm long complete all as specified and directed by Engr-in-Charge.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F Factory made Box Type steel ventilators fixed type, incl with one shop coat of primer,complete as shown in Drawing No. CEJZ/TD/24 sh 1/1 to 1/3, and all as specified & directed.

S&F figured glass, pin head type & glazing with oil putty in square n exc 0.5 sqm in each pane 3 mm thick complete all as specified and directed by Engr-in-Charge.

M&L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete complete all as specified and as directed by the Engineer-in-Charge

M&L for 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25&3 parts of sand by weight all as specified and directed by Engr-in-charge

S&F Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position all as specified in SSR Pt-I, 500 litre capacity all as specified & directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge.

S&F Medium grade GI tubing 15 mm bore with all fittings , to walls, ceiling or laid in floors etc.

S&F Medium grade GI tubing 20 mm bore with all fittings , to walls, ceiling or laid in floors etc complete all as specified and directed by Engr-in-Charge.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20 mm bore pipe complete all as specified and directed by Engr-in-Charge.

S&F stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore complete all as specified and directed by Engr-in-Charge.

S&F bib taps cast cipper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F Viterious china White Wash Hand Basin fixed in repairs includign 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia & 15 mm PTMT connection pipe 450 mm long complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed by Engr-in-Charge.

S& F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

S&F towel rail 600 mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats complete all as specified and directed by Engr-in-Charge.

S&F for European type water closet,including plastic seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge.

S&F CP Health faucet spray with 1.5m long pipe with wall hook & complete all as specified and directed by Engr-in-Charge.

Supply and fix Bib taps two way type , cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC connections 15 mm size with PTMT nuts to length 450 mm complete all as specified and directed by Engr-in-Charge.

S&F PVC flushing cistarn 10 ltrs capacity ISI marked incl PVC damtake pipe PVC 450mm inlet etc complete all as specified and directed by Engr-in-Charge.

Cutting holes in to or through in brick or stone walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 as required, exc 150sqcm & n exc 400 sqcm complete all as specified and directed,

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let complete all as specified and directed by Engr-in-Charge.

PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia out let complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes of 75 mm dia, single socket fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends of 75mm dia, any radius complete all as specified and directed by Engr-in-Charge.

M&L point wiring complete with 1.5 Sqmm single core PVC insulated cable 1100 Volts grade multistranded copper conductor drawn through in PVC Casing and Capping on surface stone / brick, masonry walls, roofs floors etc including MS terminal boxes fabricaterd out of 1.12mm thick MS sheet sunk type / surface type and laminated top sheet of 2mm thick for housing switches sockets, regulators etc including provn of 1.5 sqmm dia copper conductor for earth wire connected to common dolly for One light point / Fan point / Exhuast Fan point controlled by one 5 Amps One way switch all as specified and directed by Engineer-in-Charge

All as per Item No. 69 but for one 3 pin 5/6 Amps switch socket outlet on same board

All as per Item No. 69 but for one 3 pin 5/6 Amps switch socket outlet on independent board

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed.

M&L Switch Socket Combination outlet, multipurpose, 2 pin 5 amps/3 pin 5 amps controled by one switch 5 amps, flush type complete all as specified and directed.

M&L lamp holder insulated body with back plate suitable for battern fittings

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminais all as specified

S&F Sheet Modular metal enclosure DB SPN 240 Volts 4 Way single door type with 200 Amps busbar for fixing of MCBs complete all as specified and directed.

S&F MCB Single pole and neutral, 40A, 415 Volts AC complete all as specified and directed.

S&F MCB Single pole, 5-32A, 415 Volts AC complete all as specified and directed.

supply and fix LED Lamp Retro fit type 9 watts 230 V and all as specified by Engr-in-charge

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.5 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner heathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of 6Sqmm size stranded conductor all as specified and directed by Engr-in-Charge.

Supply and laying steel water tubing medium grade, galvanised with all fitting, laid in trenches and testing for leakages complete all as specified and directed for the 25 mm dia complete all as specified and directed.

All as per Item No. 85 above but for 20 mm dia complete all as specified and directed.

Supply and laying steel water tubing medium grade, galvanised with all fitting, fixed to wall and ceilings or laid in floor and testing for leakages complete all as specified and directed for the 20mm dia complete all as specified and directed.

Supply and fix in replacement of unserviceable Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed for the 20mm dia bore complete all as specified and directed.

Supply and fix in replacement of unserviceable ball brass valves, high pressure with polythene float and fly nut alongwith socket/reducer of suitable size, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed for the 20mm dia complete all as specified and directed.

M/s Rashid Mohammed (BID ID -3145683)

Rakesh Choudhary Contractor (BID ID -3145034)