SPECIAL REPAIR TO BLDG NO P393 FH FLAG STAFF HOUSE AT AHMEDABAD CANTT

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets

M&L for 6mm thick AC plain building boards as in ceiling complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE and having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified specified

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by GE and having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified specified

Demolition of cement concrete of any description and in any position not otherwise as dircetd and as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete all as specified.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick in CM 1:4 screed bed all as specified.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:3) complete all as specified

M&L Udaipur Green marble 18-20 mm thick laid and jointed with grey cement slurry over and including 20 mm thick CM 1:3 screed bed complete all as specified and directed.(Note: All exposed side of stone slab to be rounding)

M&L for pre Polished Chequered cement concrete tiles 30cm x 30cm x25mm thick on horizontal surfaces,set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed CM 1:6.

S&F Butt hinges, Medium weight, cold rolled mild steel, and fixed 100mm size

Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L for rendering on fair faces of brick work in two layers i.e., 15 mm thick in CM 1:4 mixed finishing the surface fair and even without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over one coat of Primer on walls complete all as specified and directed.

Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of cement based paintover one coat of Primer on walls complete all as specified and directed.

M&L 10mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface complete all as specified and directed.

M&L newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over and incl one coat of wall care putty on wall surface complete all as specified and directed..

Demolition of brick work built in cement mortar of any description.

M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete.

Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site.

Taking down chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame).

S&F mild steel angle iron work as in doors frames, chajja hollow square sections conforming to 410W(Gde E-250) quality-B including fixing of holdfast and hinges complete all as specified

S&F factory made 35 mm flush shutter, solid coare construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed.

S&F factory made 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats

S & F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

S&F 200 mm long Aluminium anodised barrel tower bolts.

S&F 150 mm size aluminium anodised door handles.

M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 300 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete all as specified and directed

M&L for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-B (18 mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle with or without opeing for AC as directed by EIC etc

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified.

S & F of mild steel work such as window guard bars and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

S&F in repair repair 25 mm dia drapery rod fancy powder coated fixed to wall with bracket & knobs complete.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F 100 mm size aluminium anodised door handles.

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E- 165)complete all as specified and directed.

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following

(a) One light point controlled by one switch.

(b) One ceiling/ex fan point controlled by one switch.

(c) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(d) One socket outlet 6 amp controlled by one switch on indepdendent board.

(e) One bell point controlled by one bell push.

(c) One light point controlled by two, two way switches.

M&L for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with suitable and required size of modular box for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F modular switch one way 6 amp 1 module all as specified and directed

S&F modular switch one way 16 amp 1 module all as specified and directed

S&F modular socket 6/16 - 2/3 pin combined 2 module all as specified and directed

S&F modular socket 6 amp 3 pin 2 module all as specified and directed

S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete

S&F modular switch two way 6 amp 1 module all as approved.

S&F modular bell push, 6 amp, 1 module.

S&F modular hum free electronic step fan regulator, 100 watt 2 module all as specified and directed

S&F bell multi music type, AC, 240 volts complete. Make-Anchor or SSK or Havells Reo as approved.

S&F LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections as directed

S&F LED batten (1.2 m) made of PVC housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus as approved.

Taking down Fans of any make, type and sweep by disconnecting Electric Connection and deposited to MES store yard.

Supply & fix exhaust fans AC single Phase 230/240 V of size 300 mm sweep with louver, metal body.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-

(a) 2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit..

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

(a) Single pole 6 to 32 amp.

(b) Double pole 32 amp.

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-5 of SSR Part-I. all specified

Shreeganesh Construction

SANVI ASSOCIATES

nevi constructions