Building

Name of Work :- Const. Of Kuba Anganwadi Building at Sanand Ta. Sanand

Dist. Ahmedabad Package No. AHD/Anganwadi/23 (2026-2027) (Kuba) Total-1

Memorandum Showing items of Works to be Carried out

Sr. Item of Work Quantities Unit Tender Total

No. estimated RatesIn Amount

but may Figures According to

be more Rs.P.S. Estimated

or less Quantities

1 Item no- 1 Excavation for foundation upto 1.5 mt.depth 61.410 Cum 149.67

including sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50meter lead (B)

Dense or Hard soil

2 Item no- 2 Carring out plinth treatment to post 68.910 Sqm 105.95

construction / existing structure by spraying chemical

solution for termite control treatment including labour

and material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As per 6131_ part- II

Consentration Weight one percent is recommended i.e.

one litre 20 EC chemical emulsion dillute with 19 liter

give 1 % concentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqmt.

of surface is recommended as per I.S.

3 Item no- 3 Providing and laying cement concrete 1:4:8 (1- 8.480 Cum 2838.81

Cement : 4- coarse sand : 8- crushed stone aggregates

mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

4 Item no- 4 Providing and laying cement concrete 1:3:6 (1- 8.410 Cum 3228.39

Cement : 3- Coarse sand : 6- crushed stone aggregate

40mm normal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

5 Item no- 5 Filling in plinth with sand under floors 14.270 Cum 460.19

including watering ramming, consolidating and dressing

6 Item no- 6 Filling foundation and plinth with murrum 134.000 Cum 289.06

or selected soil in layer of 20 cm in thickness

including ramming watering and consolidating etc.

7 Item no- 7 Filling available excavated Earth (Excluding 23.070 Cum 130.39

Rock ) in trench plinth side of foundation . in layer not

excluding 20 cm in depth consolidation each deposited

layer by ramming and watering etc. complete

8 Item no- 8 Providing and laying cement concrete 1:3:6 (1 1.840 Cum 4046.21

cement : 3 coarse sand : 6 crushed stone aggregates 20 mm

nominal size) and curing complete including cost of form

work in (A) Wall caps/ copings.

9 Item no- 9 Providing and laying ordinary cement concrete 1.210 Cum 8963.84

1:1.5:3 (1 Cement : 1.5 corse sand : 3 graded stone

aggregates 20mm nominal size) and finishing smooth with

curing etc. complete including the cost of formwork but

excluding the cost of reinforcement of R.C.C. work in (A)

BEAMS :(ii) Having cross-sectional area more than

Sq.m. and up to 0.08 Sq.m.

10 Item no- 10 Providing and laying ordinary cement 0.320 Cum 9090.84

concrete 1:1.5:3 (1 Cement : 1.5 corse sand : 3 graded

stone aggregates 20mm nominal size) for R.C.C. Lintel

including finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

11 Item no- 11 Providing & laying Ordinary cement concrete 7.320 Cum 7258.19

1:1.5:3 (1cement : 1.5 coarse sand 3 graded stone

aggragate 20 mm nominal size) and finishing the smooth

with curing etc. complete including the cost of formwok

but excluding the cost of reinforcement for RCC work in

(II) slabs having more than 10 cm and upto 13 cm

12 Item no- 12 Providing T M T. bar reinforcement of Fe- 937.000 Kg. 76.21

500D for R.C.C. work including bending binding and

placing in position complete up to All floor Level

13 Item no- 13 Brick work using common burnt clay building 33.540 Cum 4051.78

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar

1:5. (1- Cement : 5 -fine sand) B) Conventional

14 Item no- 14 Brick work using common burnt clay building 22.770 Cum 4326.75

bricks having crushing strength not less than 35 kg./

Sq.Cm. in super structure in Cement Mortar 1:5.

(1- Cement : 5 -fine sand) (B) Conventional

15 Item no- 15 Half brick masonry in common brunt clay 11.070 Sqm 653.17

building bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in super structure above plinth up to floor two level

Conventional Bricks for All Floors.

16 Item no- 16 Providing and fixing alluminium anodised 5.440 Sqm 5990.68

glazed door rectangular frame 60mm x 40mm x 2mm @

1.037 Kg./ Rmt. weight, flush door shutters, solid core

construction with frame of first class hardwood with cross

board and face veneer or plywood face panels , including

anodised alluminium butt hinges with necessary screws.

including Laminated sheet 1 mm thick,S.S. stoper 30cm

long ASIS 304 grade,S.S. Aldrap 30cm long ASIS

grade,S.S. Handle 15cm long ASIS 304 grade,S.S. Handle

Door stop ASIS 304 grade(2) 35 mm thick.

17 Item no- 17 Providing and fixing window having extruded 4.790 Sqm 1713.70

aluminum Colour anodized section frame main outer size

63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal

two track member size 61.85 mm x 31.75 mm x 1.20mm

@ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm

x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

18 Item no- 18 Providing and fixing standared extruded of 3.160 Sqm 1175.56

alluminium section of size 63mm x 38.10mm x 1.2mm @

Wt. 0.643 Kg/mt with colour anodized alluminium frame

for ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

19 Item no- 19 Providing and fixing M.S. grills of required 198.440 Kg. 106.07

pattern to wooden frames of windows etc. with M.S. flats

at required spacings and frame alround, square or round

bars with round headed bolts and nuts or by screws (A)

Plain Grill. including Applying priming coat and Painting

two coats (excluding priming coat) etc. complete.

20 Item no- 20 Providing and laying Vitrified tiles 8 to10 45.250 Sqm 1484.61

mm thick, 36'' x36'' in flooring treads of step sand landing

laid on a bed of 12mm thick cement mortar 1:3 (1 cement

: 3-coarse sand ) finishing with flush pointing in white

21 Item no- 21 Providing & Fixing 30 mm thick polished 11.780 Sqm 709.06

Kota-stone slabs for Shelves of Cupboard shelves

including making grooves in walls and finishing with

C.M.( 1:1) and polishing etc. Complete.

22 Item no- 22 P & L 24"x24" vitrified 8mm thick tile 1.760 Sqm 1397.83

flooring over 20mm(average) base of cement mortar 1:6 (

1 cement:6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

23 Item no- 23 Providing and laying Vitrified tiles 8 to10 25.020 Sqm 1538.85

mm thick ,in skrting risers of steps and dedo on 10 mm

thick cement plaster 1:3 (1-cement :3-coarse sand) and

jointed with white cement slurry

24 Item no- 24 Providing and laying broken china mosaic 53.360 Sqm 747.29

flooring for Terrece using 12mm to 20mm of broken piece

of glazed tiles to be laid over cement mortar bedding of

CM (1:3) to plain or slope & to be tempered to bring

Mortar cream out upto surface using white cement

including rounding off junction and extending them up to

15 cm along the wall clearing water and oxalic acied etc

25 Item no- 25 Providing and fixing machine cut, free edges, 25.680 Sqm 2823.61

mirror polished Granite stone slab 18 mm thick for

vertical wall/ Doors/ Windows Sill, Jams for cladding as

per design including full moulded round inside edge and

laid on 10 mm thick cement mortar 1:3 ( 1 cement:

coarse sand) jointed with grey cement slurry including

rubbing and polishing finishing etc. complete.

26 Item no- 26 Providing 15mm thick cement plaster in 106.460 Sqm 176.58

single coat on Rough (Similar) side of single or half brick

walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-

cement: 3 sand) and finishing with a floating coat of neat

cement slurry.etc. complete.

27 Item no- 27 Providing 10 mm thick cement plaster in 52.210 Sqm 153.67

single coat on Ceiling / sofit of stair for interior

plastering finished even and smooth in (ii) Cement mortar

1:3 (1-cement 3 - sand )for Ground Floor

28 Item no- 28 Applying two coats of acrylic lappy (putty) 133.650 Sqm 119.82

and two coats of primer & Wall painting ( two coats)

with plastic emulsion paint of approved brand and

manufacture on wall surfaces to give an even brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

29 Item no- 29 20 mm thick sand faced cement plaster on 138.500 Sqm 300.66

walls upto 10 mt height above ground level consisting of

12 mm. Thick backing coat of c.m. 1:3 (1 cement : 3 sand)

and 8 mm. Thick finishing coat of c.m. 1:1 (1 cement

: 1 sand) etc. complete as directed.

30 Item no- 30 Finishing wall with weather proof exterior 138.500 Sqm 114.53

emulsion paint on wall surface (two coats) to give an

required shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials etc complete

31 Item no- 31 Constructing a cooking platform 60 cm. width 1.200 Rmt 2483.99

and 70 cm high resting on B.B.Masonry walls 23 cm.thick

in C.M. (1:6) with (i) Fixing or precast R.C.C.1:2:4) 8 cm.

thick slab with marble chips set in C.M. (1:6) (6mm thick

terrazo) with plastering on exposed faces walls in C.M.

(1:4) etc complete. including the approved quality

stainless steel sink of size 600 X 400 X 150 including

fixing the sink in the stone platform with waste pipe and

whole work as per instruction of Engineer in charge.

32 Item no- 32 Providing laying and jointing in true line and 15.000 Rmt 72.65

level 15mm dia. U.P.V.C. Pipe ( SCH-40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

33 Item no- 33 Providing laying and jointing in true line and 20.000 Rmt 91.84

level 25mm dia. U.P.V.C. Pipe ( SCH-40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

34 Item no- 34 Providing laying and jointing in true line and 10.000 Rmt 119.15

level 32 mm dia. U.P.V.C. Pipe ( SCH-40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

35 Item no- 35 Provdg. & fixing gun metal check or 5.000 Each 420.63

nonreturn full way wheel valve. (C) 25 mm dia.

36 Item no- 36 Providing and fixing to wall ceiling floor 10 14.000 Rmt 277.43

Kg. F/Cm2 working pressure polythene pipes for soil

waste and ventilating pipes of the following outside dia.

low density, complete with necessary fittings ,wall

clamps etc including making good the wall ceiling and

floor. (F) 75 mm

37 Item no- 37 Providing and fixing to wall ceiling floor 10 15.000 Rmt 336.24

Kg. F/Cm2 working pressure polythene pipes for soil

waste and ventilating pipes of the following outside dia.

low density, complete with necessary fittings ,wall

clamps etc including making good the wall ceiling and

floor. (G) 110 mm

38 Item no- 38 Providing and fixing PVC SWR Nahni Trap 2.000 Each 571.08

IS 14735 for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing design with

C.I. screwed down or hinged grating including the cost of

cutting and making good the walls.

39 Item no- 39 Providing and fixing Screw down Quarter 2.000 Nos 214.81

turn bib taps of following size (A) Brass chromium

plated screw down Bib tap (Ii) 20 mm dia

40 Item no- 40 Providing and fixing wash basin with single 2.000 Nos 2092.55

hole for pillar tap with C.I. Or M.S. brackets painted

with including cutting holes and making good the same

including fittings, (fixing C.P brass waste 32 mm dia),(

fixing M.I. fisher union 32 mm dia),(fixing pillar tap,cap

stan head , screw down high pressure with screws, shank

sand back nuts. 15mm dia), (fixing brass screw down stop

tap15mm dia), (fixing Rubber plug) (A) Vitreous China

(ii) Flat back wash Basin 550mm x 400mm size (i) in

41 Item no- 41 Providing and fixing water closet squatting 2.000 Nos 1535.97

Pan (Indian type W.C.Pan) size 580mm (A) Vitreous

China.(I) Long pattern, White colour including Providing

and fixing(100mm size P or S trap for water closet

squatting pan including jointing the trap with the pan and

soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)

(A) Vitreous China.),(G.I. inlet connection for flush pipe

with W.C. Pan) (C.P. Brass 1/2 turn flush cock 25 mm dia)

42 Item no- 42 Providing erecting and fixing double 1000.000 Liter 3.95

coated Syntex or equivalent PVC. (ISI) mark water

tank of required capacity each with all necessary fittings

& connection etc. comp on terrace.

43 Item no- 43 Providing and fixing S.W. Gully trap with 1.000 Nos 1292.19

C.I. Grating brick masonary chamber and water tight

C.I. Cover with frame of 300 mm. X 300 size (inside)

with standard weight (I) Square mouth traps (C) 100 mm.

X 100 mm size P type

44 Item no- 44 Constructing brick masonary chamber 1.000 Nos 2932.93

for under ground C.I. Inspection chamber and

bends with bricks having crushing strength not

less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with

frame (light duty) 455 mm. X 610 mm. Internal

dimensions, total weight of cover with frame to

be not less than 38 Kgs. weight of cover 23 Kg.

and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4

mix(1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm. size ) foundation concrete

1:5:10 inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with a floating coat of

neat cement on walls & bed concrete etc.

complete. (I) inside dimensions, 455 mm. x 610 mm.

And 450 mm. Deep for single pipe line.

45 Item no- 45 Constructing brick masonary chamber 1.000 Nos 3660.76

for under ground C.I. Inspection chamber and

bends with bricks having crushing strength not

less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with

frame (light duty) 455 mm. X 610 mm. Internal

dimensions, total weight of cover with frame to

be not less than 38 Kgs. weight of cover 23 Kg.

and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4

mix(1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm. size ) foundation concrete

1:5:10 inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with a floating coat of

neat cement on walls & bed concrete etc.

complete. [II] Inside dimensions 500 mm. x 700 mm.

& 450 mm. deep for pipe lines one or two.

46 Item no- 46 Providing and constructing soak pit of 1.000 Nos 41305.11

size 2.46mt. outer and 6.0mt. deep including 23cm

thick brick masonary for top 0.75mt. height solid

masonary in cement mortar 1:6 and remaining honey

combed masonry in cement mortar 1:6 and covered

with jodhpuri patti C.I. pipe 100mm dia 1.8mt. long

etc. comp. as directed including 15mm plaster in

C.M. 1:4 over jodhpuri patti.

47 Item no- 47 Providing and fixing 90 cm high Stainless 15.000 Rmt 3662.27

Steel railing made from anticorrosive 304 grade S.S.

pipe of 50 mm dia (16 gauge) as hand rail with S.S.

304 grade baluster of 32 mm dia (16 gauge) as a

vertical support fixed in RCC slab / steps of stair at

1.2 Mt. c/c including three horizontal S.S. pipes of

mm dia (16 Gauge) at equal distance fixed by 16 mm

dia (16 Gauge) S.S. pipe with baluster including

accessories as per detailed drawing as directed etc.

48 Item no- 48 Construction of an under ground masonry 2000.000 Litre 12.26

water tank of size 2.00 m X 2.00 m X 1.50 m =

litre capacity as per the approved drawing & design

49 Item no- 49 Providing and fixing pre-cast Rubber 45.000 Smt 686.90

Dye/steel Dye interlocking concrete block 60 mm

thick with grade of concrete M300 pnumatic

compressed /vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35mm Sand layer for levelling and filling

the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

50 Item no- 50 Providing and laying cement concrete 0.780 Cum 3697.91

1:2:4 (1 Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and

51 Item no- 51 (i) Half brick masonry in common brunt 5.460 Smt 599.84

clay building bricks having crushing strengthnot less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1 Cement:

4-coarse sand) in foundation and plinth

(B) Conventional

52 Item no- 52 Providing 15mm thick cement plaster in 13.640 Smt 205.37

single coat on brick /concrete walls for interior

plastering upto floor two level and finished even and

smooth in. (ii)Cement mortar 1:4 (1 cement:4-sand )

with finishing in floating coat of neat cement slury

53 Item no- 53 Providing and laying cement concrete 1.440 Smt 351.56

flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded

stone aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement. (B)

54 Item no- 54 Providing and laying in ground 110 mm 30.000 Rmt 334.08

diameter PVC rain Water pipe 6 Kg./ Sq.cm.

necessary fittings connection as per detailed drawing

as directed by Engineer - in - charge.

55 Item no- 55 Providing and laying in ground 150mm 10.000 Rmt 429.76

diameter PVC rain Water pipe 6 Kg./ Sq.cm.

necessary fittings connection as per detailed drawing

as directed by Engineer - in - charge.

56 Item no- 56 Brickwork using common burnt clay 1.550 Cum 4021.02

building bricks having crushing strength not less than

35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6-fine sand) (B)

57 Item no- 57 Providing formwork of ordinary timber 1.200 Smt 173.40

planking so as to give a rough finish including

centering shuttering strutting and propping etc.

Height of propping and centering below supporting

floor to ceiling not exceeding 4M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (A) Foundations Footings Bases of

Columns etc. and Mass concrete.

58 Item no- 58 Supplying of crused stone aggregate of 0.200 Cum 661.90

25 to 40 mm size as directed with 5 Km. lead

59 Item no- 59 Supplying of coarse sand as directed with 0.610 Cum 419.42

60 Item no- 60 Point wiring for Light / Fan/ Bell/ Primary 15.000 No. 390.87

Point with 2-1.5 sq. mm & earth wire of 1.5 sq. mm

(green) both are of ISI marked 1.1 kv grade FRLS PVC

insulated multi strand copper wires upto max length of

mt, in below type of pipe erected with 6A Tissino Type

ISI marked flush type switch / bell push and accessories

erected on Metal / PVC /Wooden Box covered with 3 mm

thick PC (Poly carbonate) /Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

(Elect S.O.R. P NO. 17 Item No. 1-1-1 (f)

61 Item no- 61 Providing & erecting Approved make Ceiling 3.000 No. 2311.89

Fan with double ball bearing ISI mark with Condenser

volt A.C.50 Hz 1200 mm sweep complete having 3 blades

aluminium body and blade sets having ornamental design

shanks , canopy erected with earthing. [ Make shall be

approved by Engineer in Charge] (Elect S.O.R P NO.

item code 5-1-3)

62 Item no- 62 Supplying and erecting LED indoor fittings 5.000 Ea. 295.93

with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sinks hallbe

made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with

companymark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED LED driver efficiency >

85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.TheEngineer

inchargemayselect any wattage capacity between the

ranges shown.) (A) Tube Light with integral driver. (iii)

18-20 Watts, Surge-2KV,IP-20, conventional 4 feet

(Elect. SOR P.NO.56 It Code 2-15-1 Cat. III)

63 Item no- 63 Point wiring for independent PLUG with 2.000 No. 347.44

following size mains earth wire of 1.5 sq.mm (green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires upto 10 mt length, in following

below of pipe erected complete with ISI marked 3 / 5 Pin

socket and tissino type switch erected with earth

continuity connection erected on Metal / PVC/Wooden

box covered with 3 mm thick PC(Polycarbonate) /

Acrylic/Laminated sheet.[A] For 6 amp plug and 6 amp

switch with 2- 1.5 sq. mm Cu. Mains from near by

switchboard/ db board upto 6 mt.(f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete (Elect S.O.R. P NO. 18 Item 1-1-2

64 Item no- 64 Providing & erecting 240 V MCB double pole 1.000 No. 270.68

switch for motor & inductive load (C Curve) having

KA breaking capacity & confirms to IS: 8828 in existing

box having following capacity(A) 6 to 32 Amp(Elect

S.O.R. P NO. 87 Item No. 3-10-2 cat II)

65 Item no- 65 Providing and erecting Pipe type earthing with 1.000 No. 823.15

40 mm dia 2.5 mtr long 'B' grade G.I. pipe with necessary

coupling buch buried in specially prepared earth pit & G.I.

earth wire of 8 SWG erected & connected as directed (For

panel) (Elect S.OR P NO. 95 Item No. 3-14-6-B)

66 Item no- 66 Providing & erecting open well horizontal 1.000 No. 10284.83

mono block pump set with cast iron body, complete for

three phase submersible motor having SECTION 9-4 [A]

For 1.5 HP 3 phase open well horizontal mono block

pump set suitable for 190 LPM @ 20 mtr head suitable for

40 mm dia delivery pipe Catt-II (Elect S.OR P NO.

Item No. 9-4-2)

67 Item no- 67 Providing and fixing 600 mm x 450 mm 1.000 Nos 833.73

bevelled edge mirror of superior glass mounted on 6 mm

thick plywood sheet or PVC framing and fixed to wooden

plugs with C.P brass screw and washers. {SOR. P No

It. Code. 23024}

68 Item no- 68 Providing and fixing C.P. brass towel rail 1.000 Nos 603.19

complet with C.P. brass brakets fixed to wooden plugs

with cpbrass screws ( B ) 600 mm X 20mm size {SOR. P

No. 177 It. Code. 23025}

69 Item no- 69 Sheesham wood study Table and Chair. Table 1.000 No. 11992.74

dimension 34 inches length , 18 inches width and

inches height. Primary material solid sheesham woodand

secondary material 15mm solid MDF color teak finish

70 Item no- 70 2 Seater School Benches and Desks (small) 5.000 No. 5095.45

for childrens (MR)

71 Item no- 71 Furniture for Cup board 1.000 LS 20200.00

72 Item no- 72 Premium quality Kids Play school indoor 1.000 Set 20042.44

setup (1) Amazon basic junior BPA free 4 to score Giant

premium plastic games set. (MR)

73 Item no- 73 Premium quality Kids Play school indoor 1.000 Set 825.17

setup (2) Jazz Drum set. (MR)

74 Item no- 74 Premium quality Kids Play school 1.000 Set 3584.49

indoor setup (3) Play rubber tiles.

75 Item no- 75 Premium quality Kids Play school 1.000 Set 607.01

indoor setup (4) Clapjoy slingo fastest finger first

76 Item no- 76 Premium quality Kids Play school 1.000 Set 7674.99

indoor setup (5) OK play see saw yellow/ green.

77 Item no- 77 Premium quality Kids Play school 1.000 Set 2513.89

indoor setup (6) OK play Rocker medium for

kids, boat ride on toy

78 Item no- 78 Premium quality Kids Play school 1.000 Set 619.13

indoor setup (7) Table tennis trainer

79 Item no- 79 Premium quality Kids Play school 1.000 Set 384.81

indoor setup (8) table tennis press button

80 Item no- 80 Premium quality Kids Play school 1.000 Set 4305.63

indoor setup (9) Dawnwake Baby play

81 Item no- 81 3D Wall painting (two 20.600 Sqm 1878.60

coats)oainting tech that creats the illusion of

depth and dimention on a flate surface wall art

that can be use public place3D model physical

body using collection of point in 3D space

connected by various geometric entities curve

surface with plastic emulsion paint of approved

brand and manufacture on undecorated wall

surface to give an even draw a pictures and

writing a slogan releated of diffrent painting and

other theme based like harritage

painting,cleaness,plastic free city,save water,

save daughter,go green,clean city, etc.shade

including throughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth etc.all

material,scaffolding, additional coats if required and

labour or painter as directed by Engineer in Charge .

Method 1. Removing Dust from wall with use of wire

brush and sand paper . 2.Prepare surface with appying

exterior puty , cement slurry, or plastering which one

required for even surface. 3. Appying Base coat of

primmer 4. apply final even coat of colour 5. Draw

line picture 6. pre detaling for painting 7. final

detailing of 3D painting 8. applying lacquer

protection coat on the whole painting area (make :-

Asian Paints, Burger, Nerolac. Equivalent brand

as approved by the authority. )

82 Item no-82 2D Wall painting (two coats) with plastic 20.600 Sqm 1373.60

emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even draw a pictures

and writing a slogan releated of SWATCHHTA

SURVEKSHAN Campain and other theme based like a

harritage,cleaness,plastic free city,save water, save

daughter,go green,clean city,City importance etc.shade

including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered

smooth etc.all material,scaffolding, additional coats if

required and labour or painter as directed by Engineer in

Charge . Method 1. Removing Dust from wall with use of

wire brush and sand paper . 2.Prepare surface with

appying exterior puty , cement slurry, or plastering which

one required for even surface. 3. Appying Base coat of

primmer 4. apply final even coat of colour 5. Draw line

picture 6. pre detaling for painting 7. final detailing of 2D

painting 8. applying lacquer protection coat on the whole

painting area (make :- Asian Paints, Burger, Nerolac.

Equivalent brand as approved by the authority. )

Rs. Thirteen Lacs Twelve Thousand Two Hundred Eighty Three & Paisa Twenty Only

I/We am / are wolling to carry out the work at

wrriten in figures and words) of the estimated rate mentioned above. Amount of my/ our tender works

*Estimated Amount *Estimated Amount

(* Please strike out whichever is not applicable.)

Notes 1 - All work shall be carried out as per Public Works Department Handbook and other

specifications of Division or as directed.

GM\W v! ov AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0lJhGGL ALHL BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

Notes 2 - All the columns is Schedule should be filled in ink and the total of the entries in the last

column should be struck by the contractor under his signature.

GM\W vZ ov VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL SMg8=FS8Z[ 5MTFGL ;CL SZJL

Deputy Executive Engineer Executive Engineer

R & B Panchayat Sub Division R & B Panchayat Divisions

Sanand Ahmedabad