CERTAIN PROVISION WORKS AS A PROVN OF BATHROOM AT HAAT GATE TCP AND CAT WALK TCP OF 20 MTN DIV PRO UNIT, PROVN OF TILING , GRANITE FOR COOKING PLATFORM AND OTHER CONNECTING MISC WORK AT BLDG NO 4/R/5 (QTR NO 129 TO 133) AND 159 OF 20 MTN DIV SIG REG

Amount

Schedule 'A'

M& L for Surface dressing n exc 15 cm deep for adjoining area complete all as specified and directed

Excavation in trenches n.exc 1.5 in deep and n.exc 1.5 m wide for foundation etc not exc 10 sqm on plan and getting out in soft / loose soil

Returning filling in, incl spreading, levelling watering & well ramming in layers n.exc 25cm in soft/loose soil.

Removing excavated material (soil) n.exc 1.5 km & depositing where directed by Engr-in-charge.

M&L for Plain Cement concrete (1:4:8) type D2 (Using 40 mm graded stone agg) in foundations,filling and mass concrete complete all as specifide as directed by the Engr-in-charge.

M & L for RCC (Design mix) M-25 grade (using 20 mm graded stone aggregate) in Beams, cantilevers, lintels over 1.5 M span.

M & L RCC (Design mix) M-25 grade (using 20 mm graded stone aggregate) for slabs suspended on walls, beams , in floors, roofs, landings and in shelves and the like.

Form work to sides and soffit of beams, lintels,shelves of slabs/beams and similar works including supports, over hangs etc rough finished surfaces of concrete,flat.etc complete all as specified and as directed.

M & L for formwork to sides of concrete foundations,plinth beams for rough finished surface of concrete, complete all as specified and as directed

M & L for TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or secuiring with clips equality conforming to TMT bars

All as per item No10 here-in-before but 6 to 8 mm dia as in stirrups

M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II completed.

S&F factory made steel ventilator with top hung shutter including friction/ box type hinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and directed .

S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete.

M&L for 150 mm size aluminium anodised cast type handles.

S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section.

S&F 100mm size stainless steel butt hinges medium weight.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair.

M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only).

Supply only integral water proofing compound.

M&L for 5mm thick RENDERING in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement.

M&L for two coat of Oil boound distember on new wall surface including preperation of the surface all as directed and specified.

M&L for applying 1 mm thick wall care putty on new or old wall surface all as directed and specified complete.

M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of new /old wall surfaces complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth

M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge

M&L for glazed coloured ceramic tiles (350x450x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed by Engr-in-charge.

S & F of 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete

Material and labour for sand filling under floors including watering and consolidation complete all as specified and directed by the Engr-in-Charge.

M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes.

Materials and labour for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified and as directed by the Engr-in-Charge.

M&L for 75mm thick PCC type C-2 (1:3:6) using 40 mm graded agg in plinth protection path/hardstanding finished cement concrete surfaces fair and even all as directed by Engineer-in-Charge.

S&F wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length.

M&L for CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 100mm) as in repair

Supply & fix angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed by the Engr-in-Charge. Make: Essco Cat Part No DLX-ESS 526 or equivalent.

Supply & fix Bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one. Make : JAQUAR Code : CON-107 KN or equivalent make as speciifed in list of makes

S&F of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, long flush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC (Make : Sleek of Hindware, Slimline of Parryware or equivalent of Cera)

S&F central hole basin mixer for WHB complete all as specified and directed.

S&F Brass CP wall mixer for mixing hot & cold water screweddown for iron pipeand fixed complete all as specified and directed.

S&F tubular towel rail 20mm dia D type, Brass Chromium Plated 60 cm long between flanges.

S & F stainless steel soap dish best quality fixed to plugs with chromium plated brass complete all as specified and directed

S&F of PVC connections 15 mm size with PTMT nuts of length 600 mm.

S & F Grating doom 100 mm dia with waste hole of PTMT (Minimum weight 40gms)

S&F Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed.

M&L Gun-metal, globe or gate valves,15mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as direcetd.

S&F of swivel shower of CP with shower arm 150 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed (Make : (ESSCO/LEADER/SONA/Jaquar).

S&F for PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge.

S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed by Engr-in-Charge (Bore of pipe 110mm)

S&F for PVC (SWR) vent cowl fixed to PVC Pipes etc complete all as directed by Engr-in-Charge (Bore of pipe 110mm)

Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for concealed water tubing and making good, cutting n.exc 10cm girth as in brick/stone or concrete block walls.

M & L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for this following. (a) Bore tubing 15mm

(b) Bore tubing 20mm

M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters; verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.

M&L for precast RCC 1: 1.5 :3 type B-1 using 20mm graded aggregate set in cement mortar 1:4 as in manhole covers including necessary formwork complete all as specified and as directed

S&F for PVC (SWR) (Bore of pipe 200mm) pipes with working pressure 6 kg/cm2 single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge.

S&F for PVC (SWR) bends any radius fixed to PVC Pipes complete all as directed by Engr-in-Charge (Bore of bend 200mm)

M&L PCC 1:3:6 Type C-1 (20mm graded aggregate) as in coping/benching for man holes.

M&L PCC 1:3:6 type C-2 concrete bed for 200mm drain pipes including packing under & haunching against the sides of pipes after they are laid & tested dia of pipe 150mm

S & F PVC(SWR) Pipes single socketed in any length with rubber rings 75 mm dia

S & F PVC (SWR) vent cowl of 75 mm dia complete all as specified and as directed.

S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

S&F of coloured Non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floor etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and as directed

M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18Sqm but n. exc. 0.36 Sqm, vertical surfaces, in skirting etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match over 10mm thick rendering in CM(1:4) complete all as specified and directed.

S&F Granite (of any type and colour ) work, thickness of granite 20 mm (table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite.

All as per item no 71 but as in skirting ( 12 mm thick) over 15mm thick rendering in CM(1:4) all as specified and directed by Engr-in-charge.

Supply and fixed sinks without drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all complete as specified and as directed. (Make: NIRALI OR EQUIVALENT APPROVED MAKES).

S&F angle valve, fancy type chromium plated, brass, 15mm bore complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed.

M&L for providing cement concrete type B-0 (1:2:4)(using 12.5 mm size graded aggregate) in coping set incl weathering, slightly rounded or chamfered angles & thickness.

M&L applying three coat of white wash including preparation of new wall surfaces

M&L for 100 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) assub base finished concrete surfaces even and rough to receive floor finishes incl necessary form work complete all as specified and directed.

M&L for Endura tiles fo size 300 x 300 x 10 mm set, jointed and pointed in neat cement slurry over in pavement / footpath / floors over incl 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M & L 80 mm thick M-40 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 25 mm thick consolidated sand cushion and joints filled with sand complete all as specified and directd.

Surface excavation n.exc (not exceeding) 30 cm deep and avg 15 cm deep and getting out in soft / loose soil

Excavation over areas in soft/loose soil n.exc 1.5M depth for foundation etc & getting out

M&L applying two coats of cement base paint of standard quality and make ,over a coat of white primer including preparation of new /old wall surfaces complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil

M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concerete complete all as specified

S&F for mild steel tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including one shop coat of zinc chromate primer paint ( including preparation of surface) at contractor's workshop before fabrication as per direction of Engr-in Charge.

M&L for MS flat iron bent to shape, holes drilled etc complete as in wind ties etc including one coat of red oxide paint.

M&L for MS plate of any size & thickness, holes drilled or without drilled etcc including one coat of red oxide paint complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based Corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws/J hooks as specified.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws/J hooks as specified.

M&L for Preparation of new steel surfaces of any description n.exc.10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxideprimer.

M&L for rendering 15 mm thick on brick or concreteor stone surfaces in cement mortar (1:3) as in screed bed for laying wall finishes.

M&L point wiring complete with FRLS PVC insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, including cutting chasingin brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with CM(1:4) with treating the surfaces as per existing finishes complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps.

(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

All as per item 93 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.

S&F switch piano flush type 5/6 amps single pole one way all as specified.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S&F OF IP20, Class I,LED light 20W (4 feet), 5700K wall/surface mounted, integrated type with aluminum housing and decorative end caps with integragted high efficiency driver and surge suppreror of 2KV or more, luminaire > 95 lumens/Watt, power factor>0.90, operating range 140-270V, 50Hz fixed with 02 Nos of PVC round/ Square blocks screws etc complete with all accesseries internally prewired and connecting up with and complete all as specified.

S&F High Power LED street light fitting ,system wattage-35 Watt, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK07 with 10KV built in surge protection device using 2.5 Sqmm PVC insulated three core copper cable including taking down all as specified and directed.

S&F MCB single pole & neutral 6 to 32 amp, 415 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F exhaust fan of 250mm sweep A/C single phase 230/240 volts heavy duty complete with fan motor, blade, bracket and ring including grouting anchor bolts and making good to disturbed surfaces to match the existing complete including provision of PVC insulated & PVC sheathed round flexible cable of copper conductor,Three core of size 0.5 sqmm from ceiling rose to connector of fan, surface of the wall shall be made good by cement work/plastering and matching by existing colour ,all the metal part shall be painted two coats of synthetic enamel paint over a coat of primer, writting the MES no. with white colour paint complete all as specified and directed.

M&L for Earthing complete with galvanised steel plate electrode of size 600x600x6.30mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 4 mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 15mm bore (Light grade) for building LT wall panel all as directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar finnel wire mesh 20 mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soilwith and including taking down the old one complete all as shown in electrical plate No 3 of SSR Part I 2009 including testing on completion all as specified and directed.

S&F street light bracket, made out of GI pipe medium grade) 25mm bore, 1.2 m long bend to shape and fixing/grouting with wall using 2 Nos 25 x 5 mm size MS FI clamps with bolts, nuts & washers complete including drilling as necessary and two coats of Aluminium paint over a coat of Red oxide primer all as specified & directed.

S&F and testing PVC Insulated screened XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of of size 16 sqmm 4 core , providing lugs, straight through joints as required complete including jointing material as required and making connection of LT cables , including dismantling & taking out defective LT under ground PVC cable from trenches, cutting and removing defective parts complete all as specified and directed.:- Note:- Excavation & earthwork,sand cushoining,brick protection & GI pipe shall measured and paid separately,

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed

M&L for GI tubing 25 mm bore ,medium class with all necessary fittings laid in trenches complete all as specified and directed.

M & L for sand cushioning/fdn filling with river Sand to underground cable/fdn (8 cm thick before laying and 15 cm thick after laying the cable/fdn punned to a thickness of 18 cm) complete all as specified and directed

Supply and fix Gun metal gate Valves with iron wheel head of 25 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge.

M&L for cutting existing GI pipe alteration or addition of 40/50mm dia bore for insertion of reducer tee complete all as specified and as directed.

Supply and Fixing in repair MCB DB single door, powder coated sheet metal enclosure, 4 way 240 volts grade single pole and neutral with 200 amps rated bus bar,IP 20 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete including taking down the old one complete all as specified and directed by Engr-in-Charge.

M/s. RAMPHAL GARG

S.N. GHOSH AND CO.

CENTRAL ENGINEERING WORKS

M/S East India Traders

M/S ALOKE CHAKRABORTY and CO

L. B. SHARMA

BINOD TRADING CO.

M/S NAV BHARAT TRADING CO.