Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.1 LAccepted-AOC KORAMANGALATH HOUSE TOMY LANE SOUTH PANAMBILLY NAGAR KADAVANTHRA P O KOCHI 682 020 | KOCHI | ERNAKULAM | KERALA | 682020 | L1 | Accepted-AOC BEING LOWEST TENDERER | |
| 2 | L2₹17.6 L+₹10,480 (0.60%)Rejected-Finance 22 1685 ST JACOB CHURCH LANE PAMBAIMOOLA EDACOCHIN ERNAKULAM KERALA 682010 | ERNAKULAM | ERNAKULAM | KERALA | 682010 | L2 | Rejected-Finance NOT BEING LOWEST TENDERER | |
| 3 | L3₹18.4 L+₹95,320 (5.46%)Rejected-Finance BLDG NO XXVIII 378A NORTH CHAMPANOOR ANGAMALI SOUTH P O PIN 683 573 | ANGAMALI | ERNAKULAM | KERALA | 683573 | L3 | Rejected-Finance NOT BEING LOWEST TENDERER | |
| 4 | L4₹18.7 L+₹1.2 L (6.99%)Rejected-Finance 18 837 KILIYARAA HOUSE PERUMPADAPPU PALLURUTHY PO KOCHI 682 006 | KOCHI | ERNAKULAM | KERALA | 682006 | L4 | Rejected-Finance NOT BEING LOWEST TENDERER | |
| 5 | L5₹19.8 L+₹2.3 L (13.3%)Rejected-Finance | L5 | Rejected-Finance NOT BEING LOWEST TENDERER |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
21 Aug 2023, 6:00 pmClosed
GE FORT KOCHI
GARRISON ENGINEER MILITARY ENGINEER SERVICES GE FORT KOCHI -682 001
REPAIR TO PLASTER, SANITARY FITTINGS, INTERNAL WATER SUPPLY, RAILING, STAIR CASE, PLASTER AND OTHER MISC WORKS IN CERTAIN OTM ACCN AT INS DRONACHARYA, MES COLONY AT FORT KOCHI
2023_MES_605983_1
8932/E8/GE_FORT_KOCHI
Open Tender
Civil Works
Item Rate
270 days
FORT KOCHI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE FORT KOCHI
₹40,000
Yes
4 Nov 2023
28 Jun 2023
29 Aug 2023
28 Jun 2023
21 Aug 2023
7 Aug 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises, all as specified and directed.
M&L PCC 40 mm thick, type B-1, 1:2:4, using 20 mm graded stone aggreage as in levelling the undulated floor area all as specified and as directed.
M&L 15 mm thick screed bedding layers in cement mortar 1:4 for laying floor finishes tiles, all as specified and directed.
M&L rendering plaster 10 mm thick in CM 1:3 on brick or concrete surfaces, finished fair and even .for receiving wall tiles, all as specified and directed.
M&L joint free non skid ceramic coloured tiles 7 to 8 m thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour to match complete all as specified.
M&L 10mm thick dark shade vitrified ceramic tile, square/rectangular, polished, area of each tile not exceeding 0.36 sqm in floors/skirting set jointed and pointed in neat cement slurry and pointed to match, all as specified and directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour to match complete all as specified.
M&L for glazed ceramic tiles, coloured of size 300 x 400/450 x 7 mm thick as in dado/skirting and riser to steps and jointed in neat cement slurry and pointed in white or coloured cement to match complete, all as specified and directed.
Dismantling wrought iron or mid steel work of any description not otherwise provided for etc. all as specified and as directed.
S&F stainless steel grills/railings fixed to walls/floors of Grade-316 including all pieces, drilling holes, sweling, buffing, complete all as specified and as directed.
S&F in repair 32 mm brass chromium plated bottle traps for washbasins with inlet and outlet screwed for pipe or copnnections including necessary packing,union and cap and fixed complete all as specified
S&f in repair 20 mm dia curtain rods, anodised aluminium alloy fixing with brackets, all as specified and directed.
S&F in repair 30 mm dia stainless Steel fancy type(powder coated) curtain rods with decorative single Knob and brackets on either sides in Doors/Windows as per sample complete all as specified
S&F in repair waste coupling brass, chromium plated for wash hand basin with long screwed shanks and fly nuts fixed in repair 32mm bore, all as specified and directed.
S&F in repair 15 mm concussive push button taps of cast copper alloy, screwed for iron pipe and fixed, all as specified and directed.
S&F in repair waste coupling brass, (40mm) chromium plated suitable for steel sink including strainer etc complete, all as specified and directed.
S&F sheet glass ordinary quality & glazing with aluminium / wooden beading and clip in square n-exc. 0.5 sqm in each pane 4 mm thick including hacking down complete all as specified & directed.
S&F sheet glass ordinary quality & glazing with aluminium / wooden beading and clip in square exc. 0.5 sqm in each pane 4 mm thick including hacking down complete all as specified & directed.
Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc complete all as specified
M&L for rendering plaster 15 mm thick in two coats (10 mm thick in cement mortar 1:6 and 5 mm thick in cement mortar 1:4) mixed with water proofing compound) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement., all as specified and directed. (Note- water proofing compound shall be measured and paid seperately) .
M&L for plastering in CM 1:6, 10 mm thick on walls finished even and smooth w/o using extra cement, all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer, all as specified and directed.
M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of Exterior primer (Proffesional pack of Asian paints) over a coat of external wall care putty n.exc 2 mm thick on new or old prepared plastered external surfaces and including scafoldings and cradles including hoisting and lowering as required with bracing , support complete all as specified.
Supply only liquid water proofing admixture , all as specified and directed.
S & F in repairs vitreous china wash down water closet (Pedestal pattern) white with 'P' trap complete including plastic seat cover white closed pattern with flat bottom, and cover with plastic hinges complete all as specified.
S&F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm fixed to wall by anchor bolts excluding taps, waste coupling, waste pipe etc complete .
S&F PVC valve less syphonic action type flushing cistern low level, dual flush, white with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
S&F in repairs fancy type pillar taps cast copper alloy, with capstan head, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm.
S&F in repairs PVC inlet connections 60 cm long, 15 mm bore with PTMT nuts , all as specified and directed.
S&F in repairs towel rail chromium plated, fixed in repairs complete 600mm long , all as specified and directed.
S&F in repairs door closer aluminium (extuded section) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed , all as specified and directed.
S&F in repairs Toilet paper holder SS fixed in repairs complete all as specified and as directed.
S&F in repairs Stainless steel soap dish fixed with SS screws, all as specified and directed.
S&F in repairs anodised aluminium alloy body door stopper 75 mm size , all as specified and directed.
S & F in repair CP grating 100 mm dia with /without hole, all as specified and directed.
S&F in repair plastic water closet seat cover (any type) black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, all as specified and directed.
S&F in repair aluminium wiremesh fix to wood/aluminium frames including taking out old damaged aluminium wire cloth complete all as specified.
Taking down chowkats or frames not exc 2 Sqm each with shutters (without taking off shutters from the frame), all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails . MS frame shall be covered with heat moulded palin colour PVC 'C" channel having a PVc sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVc sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the M s frame welded/sealed to the stiles & rails with suitable PVc sheet beading and joined together with solvent cement ,supplying & fixing in the frame at site as per specification & drawing.
S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing.
S&F in repair Aluminium alloy wire cloth, 0.45 mm, nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beadings, all as specified and directed.
S&F anodised aluminium extruded handles 150 mm size, all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section 200 mm size, all as specified and directed.
S&F butt hinges 75 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised C-21, all as specified and directed.
Attending day to day internal water supply complaints of Married accomodation of INS Dronacharya and rectify the complaints to the entire satisfaction of Engineer in charge. Note:- (i) The quoted rate shall be deemed to be included for the cost of minor items like teflon tape, washers, coupling,union,socket, bend, elbow etc suitable for following sizes of pipe and taking down old items etc. (ii) The materials required for replacement shall be measured and paid seperately under respective item. (iii) Emergency complaints will be attended on sundays/holidays also. (iv) Minimum one pipe fitter and one mate shall be detailed for one set of complaints, with all required tools in neat tool bag. (v) The trademen shall wear uniforms with safety shoes incl all necessary safety gear. (vi) Complaints/job cards shall be collected from complaint cell and trade men should submit the feedback of complaints the same day.
Supply only half/quarter turn 15 mm bore bib tap, cast brass chromium plated fancy type with crutch or butterfly handle, screwed for iron pipe long body, complete all as specified and directed (Weight not less than as specified in SSR)
Supply only half/quarter turn 15 mm bore bib tap, cast brass chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe short body, complete all as specified and directed (Weight not less than as specified in SSR)
Supply and fix in repair for 15mm bore bib taps, chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
Supply only 15mm dia stop valves cast brass alloy with crutch or butterfly handle complete all as specifed.
Supply only 20 mm dia stop valves cast brass alloy with crutch or butterfly handle complete all as specifed
Supply only half/quarter turn 15 mm Stop valves, cast brass chromium plated fancy type with crutch or butterfly handle complete all as specified
Supply only half/quarter turn 20 mm Stop valves, cast brass chromium plated fancy type with crutch or butterfly handle complete all as specified
Supply only half/quarter turn 15 mm dia Angle cock, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure with crutch or butterfly handle, screwed both ends iron pipe including taking down old cock,complete all as specified
Supply only Health faucet suitable for ABS Body chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete suitable for working pressures of high rise buildings upto 11 floors in all respect as specified.
S&F in repair 15mm dia brass, chromium plated WHB mixer tap for mixing hot & cold water, screwed down, complete all as specified.
Supply and fix 125 mm shower rose chromium plated with swivel joints suitable for fixing to 15 mm GI/UPVC/CPVC pipe or union including taking down old shower, all as specified and directed
Taking down old u/s pipe PP-R any type/size from wall complete incl all connecting accessories complete all as specified.
Supply and fix 20 mm 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc., all as specified and directed.
Supply and fix 25 mm 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc, all as specified and directed.
Taking down old u/s pipe GI/PVC/CPVC/UPVC from wall complete incl all connecting accessories complete all as specified.
Supply and fix 15 mm unplasticised PVC pipes of pressure rating 10kg\cm2 fixed to walls or laid in floors, complete all as specified
Supply and fix 20 mm unplasticised PVC pipes of pressure rating 10kg\cm2 fixed to walls or laid in floors, complete all as specified
Supply and fix 25 mm unplasticised PVC pipes of pressure rating 10kg\cm2 fixed to walls or laid in floors e, complete all as specified
Supply only 15 mm dia ball valves brass high pressure with polythene float and fly nut , complete all as specified
Supply and fix in repair 20 mm dia ball valves brass high pressure with polythene float and fly nut, complete all as specified
Supply and fix in repair 25 mm dia ball valves brass high pressure with polythene float and fly nut, complete all as specified
S&F 20 mm inner dia CPVC SDR 11 pipe and plain CPVC SDR 11fittings like bends, sockets, tees, union in multi storey buildings upto and including 4th storey , all as specified.
S&F 20 mm inner dia CPVC SDR 11 pipe and plain CPVC SDR 11 fittings like bends, sockets, tees, union in multi storey buildings 5th to 8 th storey ,all as specified.
S&F 25 mm outer dia CPVC SDR 11 pipe and plain CPVC SDR 11fittings like bends, sockets, tees, union in multi storey buildings upto and including 4th storey including taking down old pipe, all as specified.
S&F 25 mm outer dia CPVC SDR 11 pipe and plain CPVC SDR 11fittings like bends, sockets, tees, union in multi storey buildings 5th to 8 th storey all as specified.
Dismantling water tanks exc 250 and not exc 500 ltr cap and removing to store complete all as specified and directed.
Dismantling water tanks exc 500 and not exc 1000 ltr cap and removing to store complete all as specified and directed.
Dismantling water tanks exc 1000 and not exc 2000 ltr cap and removing to store complete all as specified and directed.
S&F 500 Ltr capacity rotational moulded polyethyene water storage tanks (Cylindrical vertical with closed top) twisted and fixed in position all as specified in SSR Part-I, all as specified and directed.
S&F in repairs toilet paper holder SS fixed in repairs complete all as specified and as directed.
S&F in repairs sinks with drainage boards made of stainless steel 1 mm thick kitchen with plugs , washers and waste; including bedding in cement mortar to dwarf wall/Granite or including fixing and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete (sink counter sunk into granite platform), all as specified and directed.
S&F in repair PVC Bathroom Cabinet mirrorof size 600x450mm complete all as specified and directed. Make prayag or equilant.
S & F in repair Glass shelf 600 MM, all as specified and directed. . Make:- Jaquar or equivalent
S & F in repair 15mm CP wall mixer for mixing hot and cold water screwed down for iron pipes complete all as specified and directed by Engr Make Jaquar FRL521-N
S&F in repairs anodised aluminium alloy body door stopper 150 mm size, all as specified and directed.
M&L in repairs for PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to wall GI brackets /clamps all as specified and directed ( the portion of pipe inserted to the masonery /slab shall be fixed with water proofing bathseal tape two way to the entire width of masonry/slab.), all as specified and directed. . Note:-Pipe are to be fixed away from the wall using suitable clamps and bolts.
S&F 1000 Ltr capacity rotational moulded polyethyene water storage tanks (Cylindrical vertical with closed top) twisted and fixed in position all as specified in SSR Part-I.
S&F 2000 Ltr capacity rotational moulded polyethyene water storage tanks (Cylindrical vertical with closed top) twisted and fixed in position all as specified in SSR Part-I.
S&F In repair 250 Ltr capacity PVC Loft water storage tanks (Rectangular with closed top) fixed in position all as specified and directed by Engineer-in-charge..
M&L for brass spindle suitable for bib tapes /stop valves/mixer of size 15/20mm as per site requirement , all as specified and directed.
S & F as in repairs 50 mm bore high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc, including required bend complete all as specified.
-Ditto- all as per item No 88 here in before but 40 mm bore
ZOOM ENTERPRISES
K R JOSEPH AND SONS
Anaswara Constructions
ST ANTONY CONSTRUCTIONS
General Engineering and Constructions
M-TECH ENGINEERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .