Webel IT Park Kalyani 07 IDM 20 21 09

Amount

Full Height Modular Partition Works

1a) Providing , fixing & Supplying Full Height (70 to 80mm thk.) modular (Partly solid and partly glazed or fully solid or full glazed partition with acoustic Pre-Laminated tiles and touhened glass system aluminium partition product should be manufacturing as per specifications given below: All aluminium or metallic parts section made from (aluminium alloy 63400-WP or IS: 733 & IS IS: 733 & 1285:2002) shall undergo a 8-10 stages anti rust treatment and shall be powder coated with Epoxy polyester in Glossy finish to a thickness of 60 to 70 microns. The frame structure is made by joining different Extrusions by means of brackets made of 3 mm Thk HR (IS-2062) and screws as per elevations defined by client. All the hardware items should be as per BIFMA / ANSI standards. All other items as per IS standards. All modular partitions shall be mounted on floor gaskets made of rubber / PVC to provide gripping with the floors. Each frame shall be provided with minimum two or more 12mm levelling bolts which allow 40 to 50mm adjustment for floor unevenness as well as false ceiling height difference (up to 15 mm). Provision for Horizontal adjustment is given between Side track inner and side track outer extrusion at wall side with adjustment up to 20 mm. The levellers shall be concealed inside the skirting.

1b) The main vertical member of the frame bearing the load of brackets and storages shall be made of minimum 2.5mm thick Aluminium Section (aluminium alloy 63400-WP or IS: 733 & IS IS: 733 & 1285:2002). The horizontal members shall be made of minimum 1.5mm thick Aluminium Section. The thickness of the frame shall be minimum 70 to 80mm inside. The thickness of trims and tiles shall not be considered while measuring the thickness of the frame. The frames shall be in the form of prefabricated modular structures. Frames can have 1-4 modules in prefabricated form. Additional height shall be achieved by mounting modules over them. The bottom module shall be mounted over a skirting of atleast 85mm height. The skirting shall be designed so that switches can be provided on the skirting level. All the modules shall be of the same height. The frames shall have prefabricated slots for vertical and horizontal passage of wires. The frames shall also have prefabricated slots for fixing brackets used to support worktops, overhead hampers, gable ends, etc. TILES: The tiles shall be made of 1.5 thick steel tiles on both sides.

1c) PRELAM MDF (One side decorative lamination other side balancing lamination as per requirement) Prelam tiles (both side of partition) are made of 9mm thick MDF board (IS: 14587-1998 ) , the cut edges of tiles are covered with 0.5 mm thick PVC lipping. Medium density fibre board conforming to IS: 14587-1998 for prelaminated made of wood fibre bonded with Urea formaldehyde for interior grade.ACCOUSTIC FABRIC TILES (both side of partition): All Fabric tiles shall be made of 1.5 to 2mm thick galvanized steel (Grade of Zinc Coaling 350g/sqm) as per IS code 277) tiles warped with fabric by default, so that there should not be any development of fungus in future. Fabric is pasted on them by PVA glue. It should be possible to replace the fabric by peeling it off. GLASS TILES: The glass tiles (both side of partition) shall be made of 6mm thick (IS-2835) Clear toughened glass. ACCOUSTIC PINUP TILES: The pinup tiles shall be made of polypropylene sheet encased in 0.80mm thk CRCA steel (IS-513 CR1) (powder coated with Epoxy polyester in Glossy finish to a thickness of 40 to 60 microns after 7-8 tanks anti rust treatment of surface)/ GI (Grade of Zinc Coaling 350g/sqm as per IS code 277) sheet of 0.8mm thickness. The casing thickness shall be 7mm. Fabric shall be pasted over the polypropylene sheet by PVA glue. The total thickness of the tile including the stiffeners shall be 10-12mm.

1d) MARKER TILES: The marker tiles shall be made of 4mm thick toughened glass painted from Inside, which act as a glass marker tiles. ACCESSORY TILES: The accessory tile (both side of partition) ) shall be made of Aluminium extrusion of 1.2mm thickness. The tile shall have horizontal recesses of 6mm width and 3mm depth at a distance of 27mm from each other over the entire surface of the tile. The recesses shall be used to hang accessories such as Paper Tray, Binder Bin, Telephone Holder, Bottle holder, Utility trays, etc. as per requirement. The above modular partition should be as per specification and sample approved by client . All the exposed partition paned edges shall be fixed with aluminium extrude box shape powder coated trims. Ends must be covered with Die cast aluminium. The rate shall include all design, any support (if required) above false ceiling for fixing the partition, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof. (Mode of measurement will be the single side exposed surface area below false ceiling of modular partition.)

Extra Providing glass wool of 50mm thick having density of 48 Kg per cum. to be inserted into the pre - fabricated slot covered the glass wool by marking cloths treated with Naptha @ 0.07 Ltr.per Sq.m. of cloths for acoustic purpose. complete as per directions of Engineer-in-Charge.

DOORS

Providing and fixing 12 mm thick frameless toughened glass (IS-2835).door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes, Door handle (Stainless Steel 'D' or 'H' type of size 900 mm x 25-30 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality) ,locking arrangement and stopper etc. for fixing required door fittings, all complete as per direction of Engineer-in charge. All floors & roof. The above item should be as per specification and sample approved by client. All hardware fittings are stainless steel 304grade. Above item complete in all respect. All floors & roof.

Providing and fixing door shutter / door jamb will be made out of 20 SWG M.S sheet. The shutter are to be finished with minimum 32 mm thick high quality Flush Door with 1mm Laminate pasted on both sides of the frame work fitted with connector and with a vision panel (150 mm x 1050 mm of 5 mm thick glass) All the panels are to be fitted by using CRCA " C" profiles and PVC extrusions are used as trimmings. The shutter will be fixed on Pivot hinges duly powder coated and will have door closures, 30mm dia SS H handles, 3ft long, and locking arrangement, door stopper and all other fittings required for smooth operation and locking all inclusive of approved quality as per drawing & direction of Engineer-in-Charge. All MS components and aluminium profile are finished by 40-50 microns epoxy powder coating.

Half Height Modular Partition works

3a) Providing fixing & Supplying make Half Height Partition of 1200m height of minimum 60-70mm thickness modular grid system fitted and fixed in position as per drawing and direction including providing height adjustment . The frames shall be of 2 to 2.5mm thick section thickness Aluminium (aluminium alloy 63400-WP or IS: 733 & 1285:2002) with 8-10 anti-rust treatment and shall be powder coated with Epoxy polyester in Glossy finish to a thickness of 60 to 70 microns. Top and Vertical trim is of aluminium (aluminium alloy 63400-WP or IS 1285:2002) 60-70 microns smooth powder coating Epoxy polyester in Glossy finish. Separate raceways would be provided for Power and Data/Voice. All raceways shall not exceed 150mm height and shall be made of Aluminium. Data/Voice raceway shall be at the skirting and Power above the worktop. The raceway for the Electrical and Data/Voice shall have provision for carrying up to a maximum no. of Cables.

3b) PRELAM MDF TILES(One side decorative lamination other side balancing lamination as per requirement) : Tiles are made of 9mm thick MDF board ( Both side of the partition , IS: 14587-1998) , the cut edges of tiles are covered with 0.5 mm thick PVC lipping. Medium density fibre board conforming to IS: 14587-1998 for prelaminated made of wood fibre bonded with Urea formaldehyde for interior grade. Tiles Laminate of approved shades by the client PINUP TILES : The pinup tiles shall be made of polypropylene sheet encased in CRCA steel/ GI sheet of 0.8mm thickness above the Worktop. The casing thickness shall be 7mm. Fabric shall be pasted over the polypropylene sheet by PVA glue. The total thickness of the tile including the stiffeners shall be 10-12mm as per client requirement. MARKER TILES: The marker tiles shall be made of 4mm thick toughened glass painted from Inside, which act as a glass marker tiles above the Worktop. Above worktop Pinup tiles & Marker Tiles combination as per client requirement. FABRIC TILES: All Fabric tiles Both side of the partition(as per requirement) shall be made of 1.5 to 2mm thick galvanized steel (Grade of Zinc Coaling 350g/sqm as per IS code 277) tiles warped with fabric by default, so that there should not be any development of fungus in future. Fabric is pasted on them by PVA glue. It should be possible to replace the fabric by peeling it off. All raceways shall not exceed 150mm height and shall be made of Aluminium. Data/Voice raceway shall be at the skirting and Power above the worktop. The raceway for the Electrical and Data/Voice shall have provision for carrying up to a maximum no. of Cables.

3c) GLASS TILES: The glass tiles (both side of partition) shall be made of 6mm thick Clear toughened glass (IS-2835) either. ACCESSORY TILES: The accessory tile shall be made of Aluminium (aluminium alloy 63400-WP or IS: 733 & IS 1285:2002) extrusion of 1.2mm thickness. The tile shall have horizontal recesses of 6mm width and 3mm depth at a distance of 27mm from each other over the entire surface of the tile. The recesses shall be used to hang accessories such as Paper Tray, Binder Bin, Slot for Switches and sockets, Telephone Holder, Bottle holder, Utility trays, etc., as per requirement. The above modular partition should be as per specification and sample approved by client. All the exposed partition paned edges shall be fixed with aluminum extrude box shape powder coated trims. Ends must be covered with Die cast aluminium. The rate shall include all design, any support including fixing hollow post for wire management, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof. (Mode of measurement will be the single side surface area of modular partition.)

WORKSTATIONS

Supplying providing & installing Work top Straight modular Workstation, Size : 1200mm(L) X 600mm(W) X 750mm Ht. With Under structure & Accessories of Metal Key Board Tray, CPU Trolley, all complete as per drawing. The Workstation top is made of 25mm thick Prelaminated MDF board with minimum 0.7 mm thick high pressed post form laminate of approved shade (One side decorative lamination other side balancing lamination as per requirement, IS: 14587-1998). All exposed surfaces will be finished with 2.0 mm PVC lipping, the top board will be suppored on sides which will be of 18 mm thick pre-laminated MDF board with PVC edge binding. Key Board Tray - Width:600mm, Depth:270 ,Height:70mm Made up of prime quality MS CRCA (I.S. 513 CR1 ) sheet 1.0 mm thk. Tray Slide on ebco Telescopic Channel, The tray hanged below the top by steel MS brackets. Finish: All steel components should be powder coated with Epoxy polyester in Glossy/matt finish to a thickness of 40 to 60 microns after 7-8 tanks anti rust treatment of surface. CPU Trolley with locking system wheel: Width:240mm Depth: 245mm, Height: 210mm Made up of press formed MS CRCA (I.S. 513 CR1 ) sheet 1.0mm thk. Finish: All steel components should be powder coated with Epoxy polyester in Glossy/matt finish to a thickness of 40 to 60 microns after 7-8 tanks anti rust treatment of surface. The rate shall include all design, any support (if required) for Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers, nut bolts, washer, Buffer plates, fastener, anchors, SS channel, laminated glass etc. complete in all respect. The above modular Workstation should be as per specification and sample approved by client. complete in all respect. All floors & roof.

Providing, fitting & Fixing of 6mm thk Back painted glass separator with best quality brackets for additional privacy on workstation. The rate shall include all design, any support (if required) for Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof. The above modular Workstation should be as per specification and sample approved by client.

SELF STANDING TABLES

MANAGER CABIN TABLE : Supplying providing & installing free standing modular work tables and return unit with mobile pedetal(size 450X550X715mm high) drawer 750mm high along with all 18mm prelam MDF (except back which will be 8mm Prleam MDF) made 3drawer pedestal(with locking arrangement) with hydraulic channel for smooth operation ,Key board tray , CPU trolley etc. The top of main and return table shall be fabricated out of 25 mm Prelam MDF board with 0.7 mm high pressed PF laminate on top and 0.7 mm balancing laminate on bottom. The edges will be duly chamfered and finished with PVC lipping of 2.0 mm thickness. The top will be supported on 25 mm pre-laminated 2 Nos MDF boards side. All exposed surfaces will be finished with 2.0 mm PVC lipping, the board sides will be connected with Apron/Modesty panel of 25 mm thick pre-laminated MDF board with PVC edge binding. Suitable gromet to be provided for cables. The shape of the table may be rectangular, semi­circular or any other shape as approved by client. Leveller Button-Type Nylon/PVC level-adjustor. Key Board Trey - Width:600mm, Depth:270 ,Height:70mm,tray Slide on ebco Telescopic Channel, The tray hanged below the top by steel MS brackets. CPU Trolley with locking system wheel: Width:240mm Depth: 245mm, Height: 210mm Made up of press formed MS CRCA (I.S. 513 CR1 ) sheet 1.0mm thk. with width adjustable, The rate shall include all design, any support (if required) for Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers, nut bolts, washer, Buffer plates, fastener, anchors, SS channel, laminated glass etc. complete in all respect. All floors & roof. The above modular Workstation should be as per specification and sample approved by client. Main Table size 1500 mmX 750mm wide X 750 mm height and return unit 900mm X 500mm wide)

TABLE FOR MISC USE : Supplying providing & installing free standing modular work tables with pedestal drawer unit(450WX550DX715H) of 750mm high along with all 18mm prelam MDF (except back which will be 8mm thick prelam MDF) made 3drawer pedestal(with locking arrangement) with hydraulic channel for smooth operation Key board tray , CPU trolley etc. The top fabricated out of 25 mm PF bonded MDF board with 0.7 mm high pressed laminate on top and 0.7 mm balancing laminate on bottom. The edges will be duly chamfered and finished with PVC lipping of 2.0 mm thickness. The top will be supported on 25 mm pre-laminated 2 Nos MDF boards side. All exposed surfaces will be finished with 2.0 mm PVC lipping, the board sides will be connected with Apron/Modesty panel of 25 mm thick pre-laminated MDF board with PVC edge binding. Suitable gromet to be provided for cables. The shape of the table will be rectangular, semi­circular or any other shape as approved by client. ABS wire manager would provide in the Worktop as per drawing.Leveller Button-Type Nylon/PVC level-adjustor. Key Board Trey - Width:600mm, Depth:270 ,Height:70mm,tray Slide on ebco Telescopic Channel, The tray hanged below the top by steel MS brackets. CPU Trolley with locking system wheel: Width:240mm Depth: 245mm, Height: 210mm Made up of press formed MS CRCA (I.S. 513 CR1 ) sheet 1.0mm thk. with width adjustable, Finish: All steel components should be powder coated with Epoxy polyester in Glossy finish to a thickness of 40 to 60 microns after 7-8 tanks anti rust treatment of surface. The rate shall include all design, any support (if required) for Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers, nut bolts, washer, Buffer plates, fastener, anchors, SS channel, laminated glass etc. complete in all respect. All floors & roof.The above modular Workstation should be as per specification and sample approved by client. Table Size: 1200mm X 600mm X 750mm Ht.

FLOWER VASE/SMALL CENTRE TABLE : -Supplying fixing of premium quality square corner table with 6.00 mm thick toughened glass(IS-2835) with high quality teak wood framing / SS high quality chrome plated framing. Approx. Size shall be - 550mm x 550mm x 425 mm (H) (min). All materials used should be of relevant ISI specification. Approved by Engineer-in-Charge. The above table should be as per specification and sample approved by client. complete in all respect.

CENTRE TABLE : Supplying fixing of premium quality rectangle center table with 6.00 mm thick toughened glass(IS-2835) with high quality teak wood framing / SS high quality chrome plated framing. Approx. Size shall be - 1200mm x 550mm x 425 mm (H) (min). All materials used should be of relevant ISI specification. Approved by Engineer-in-Charge. The above table should be as per specification and sample approved by client. complete in all respect.

RECEPTION TABLE : Supplying fixing and installation A designer, modular Reception table with 2nos drawer unit( each unit combine with 4nos drawer and locking system & Curve, Semi curve or Rectangular type ) Table Size Minimum 2410mm (W/L), Minimum1065 (D)x and Work surface (H) is 725mm & Front facia or Counter1035mm. Desktop structure & finish: 18mm thick(Minimum) Hard wood (sal/ pine wood) Clean matt PU finish or decorative laminate(1mm thk minimum), 18mm thick Rubberized cork and Frosted Glass 10mm thick Diamond cut finishing on edges. Under Structure Made of metal or 25mm thk (minimum) Prelam MDF board (both side alminate) / PU finish. Leg: Plastic PP moulded legs are used & fitted at the bottom surface with the chipped screws. The products should be tested as per BIFMA standards. The above table should be as per specification and sample approved by client. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof

PEDESTAL :- Supplying fixing and installation Pre-Lam 3 Drawer Pedestals with hydraulic channel for smooth operation: 450mm (L) X 550mm (D) X 700mm minimum ht made of minimum 18 mm thick MDF Board with minimum 0.7 mm thick post form lamination of approved shade and quality. The top and sides,shelves made of minimum 18 mm thick PF bonded MDF board and the back will be made of minimum 8 mm thick PF bonded MDF board of approved shade and quality with combination of 2mm PVC beading on all exposed surface as per requirement. The Drawer are provided with locking arrangement, Castors, decorative stainless steel handle. The above table should be as per specification and sample approved by client. The rate shall include all design, Engineering, 3d view and shop drawing(cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. complete in all respect. All floors & roof.

STORAGE UNITS

FULL HEIGHT STORAGE : Supplying, fitting, fixing and installation of Full Height Storage size 500mm (D) x 2100mm (H) made of Top & Bottom (25mm), Two Side & Front (Door) 18mm thk.& back 8mm thick Pre-Laminated MDF (One side decorative lamination other side balancing lamination as per requirement IS: 14587-1998 . Provide 25mm thk. Pre-Laminated MDF Multiple number shelves as required. Uniformly distributed load carrying capacity for Each shelf is 40 to 50kg. Provide screw type adjustable leveller with plastic base provide vertical adjustment for floor unevenness and levelling of units and also provide door hinge(Stainless steel) locking arrangement, decorative stainless-steel door handles. requirements

HALF HEIGHT STORAGE : Supplying, fitting, fixing and installation of Half Height Storage size 450mm (D) x 1200mm (H) made of Top & bottom (25mm), Two Sides 18mm thick & Front (Door) 12mm thk & back 8mm thick Pre-Laminated MDF (One side decorative lamination other side balancing lamination as per requirement IS: 14587-1998 . Provide 25mm thk. Pre-Laminated MDF Multiple number shelves as required. Uniformly distributed load carrying capacity for Each shelf is 40 to 50kg. Provide screw type adjustable leveller with plastic base provide vertical adjustment for floor unevenness and levelling of units and also provide door hinge(Stainless steel) locking arrangement, decorative stainless-steel door handles. The shutter arrangement may be hinged type or may be sliding type as per site

LOW HEIGHT STORAGE : Supplying, fitting, fixing and installation of Low Height Storage size 450mm (D) x 750mm (H) made of Top & bottom (25mm), Two Sides 18mm thick & Front (Door) 12mm thk.& back 8mm thick Pre-Laminated MDF (One side decorative lamination other side balancing lamination as per requirement IS: 14587-1998 . Provide 25mm thk. Pre-Laminated MDF Multiple number adjustable shelf mounting holes provided on side panel for easy interchanging or fixed of shelf height as required. Uniformly distributed load carrying capacity for Each shelf is 40 to 50kg. Provide screw type adjustable leveller with plastic base provide vertical adjustment for floor unevenness and levelling of units and also provide door hinge(Stainless steel) locking arrangement, decorative aluminium/stainless-steel door handle. The shutter arrangement may be hinged type or may be sliding type as per site

OVERHEAD STORAGE :- Supplying, fitting, fixing and installation Pre-Laminate overhead Storage size 450mm (D) x 450mm (H).The cabinet top, bottom and sides made of 18 mm thick Prelaminated MDF board with PF laminate (min 0.7mm) of approved make and shutters made of 12 mm thick phenol formaldehyde bonded MDF board and 8 mm thick pre-laminated MDF board of approved make at back. Uniformly distributed load carrying capacity for Each shelf is 40 to 50kg. provide door hinge(Stainless steel) locking arrangement, decorative stainless-steel door handle.

Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick.

Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 18 mm thick.

Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 25 mm thick.

Arterior Infra Solutions India

NUNDYS

METALEX OFFICE SYSTEM PVT LTD

ADARSH INFRAINTERIO PVT LTD