Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC H 10 KARNI NAGAR NEW NAGAUR ROAD NEAR MANDORE POLICE STATION 8TH MILL MANDORE JODHPUR 342304 | JODHPUR | JODHPUR | RAJASTHAN | 342304 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹10.1 L+₹79,270 (8.54%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹10.1 L+₹84,645 (9.12%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹10.9 L+₹1.6 L (17.5%)Rejected-Finance 33 MAHAVEER NAGAR NANDRI ROAD PO SARAN NAGAR JODHPUR 342015 | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L4 | Rejected-Finance Not lowest bidder |
Tender Value
₹11.8 L
EMD Value
₹23,680
Closing Date
23 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Banar
Garrison Engineer, Banar, Jodhpur-342027
REPAIR/MAINT OF SUMMER AND WINTER APPLICANCE AND ITS CONNECTED ITEMS AT RALAWAS UNDER GE BANAR
2023_MES_575674_2
8822/71/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer, Banar
₹23,680
Yes
29 Mar 2023
1 Mar 2023
25 Mar 2023
1 Mar 2023
23 Mar 2023
9 Mar 2023
Amount
Inspection,checking adjustments and minor repairs of storage water heater 25/35/50 ltr capacity of any type any make vertical/ horizontal type which includes the following :- (a) Inspection, taking out of drain plug & dewatering and refix the same complete all as directed . (b) Checking water tightness of storage tank . (c) Checking stop cocks with outlet/inlet pipe of geysers, pressure reducing valves etc to ensure free movement of water and easy functioning of parts. (d) Inspecting over flow vent pipe connections to ensure water-tightness and proper flow. (e) Checking and correct earth continuity of electrical items. (f) Checking functioning of heating element and correct setting adjustment of thermostat upto 55º C. (g) Adjustment of reducing valves, checking of dead weight type high pressure release valve and visual check of fusible plug for its intactness. Note : Spare part shall be measured and paid sepratly under respective items as supply only.
Taking down geysers of any type and any capacity due to rusting of bolts/seepage of wall and re-installation at any location including S&F in repair of heavy duty pin type fastener 4” long and making necessary inlet/outlet electric & water supply connections from existing source to geyser complete all as specified.
Supply only heating elements of 1.50 KW capacity complete all as per site requirement.
All as per Item Ser No 3.00 but Capacity 2.00 KW
Supply only thermostat cutout suitable for 1.5/2.00 KW geyser all as per site requirement..
Supply only Stainless steel connection pipe 15mm bore,heavy duty suitable for 1.50/2.00 KW geyser all as specified.
Supply and fix in and replacement of glass wool for geysers complete all as specified.
S&F in replacement base assembly, compatible to existing gyser, with inlet and thermostat pipe with drain plug inclusive of clamps for holding the element with nuts, bolts and gasket complete all as specified.
S&F in replacement Multifuction /Non return valve 15mm/20mm dia connecting up complete all as directed.
M&L for replacement of copper conductor cable 4 Sqmm 3 core upto 5 m with and including plug top 5 Amp inbuilt suitable for desert cooler complete all as specified.
S&F in replacement indicator lamp set with wire kit for geyser of any type colour green & red complete all as specified.
S&F in replacement stainless-steel inner tank of minimum 20 gauge sheet rated pressure not less than 7kg/sqcm suitable for 25 ltrs capacity geysers (wt not less than 3.75 kg) as per sample complete all as specified.
S&F in replacement of stainless-steel inner tank of minimum 20 gauge sheet rated pressure not less than 7 Kg/sqcm suitable for 50 ltrs capacity geysers (wt not less than 5.25 kg) as per sample complete all as specified.
S&F in replacement outer body of MS sheet not less than 20 gauge suitable for 25 ltr geyser duly painted with white synthetic enameled paints complete all as specified.
S&F in replacement outer body of MS sheet not less than 20 gauge suitable for 50 ltr geyser duly painted with white synthetic enameled paint complete all as specified.
S&F in replacement bottom cover of MS sheet 20 gauge suitable for 25 ltrs capacity geysers and providing a coat of red oxide to inner surface and applying one coat of synthetic enamel paint by spray painting to outer surface complete all as specified.
S&F in replacement bottom cover of MS sheet 20 gauge suitable for 50 ltrs capacity geysers and providing a coat of red oxide to inner surface and applying one coat of synthetic enamel paint by spray painting to outer surface complete all as specified.
S&F in repair 3 core PVC insulated copper cable of size 2.5 Sqmm multi stranded complete all as specified.
M&L for painting of outer surface of 25/50 ltrs storage type water geysers after cleaning of dust & other organic/inorganic materials if any and applying one coat of synthetic enamel white paint by spray painting and writing MES No on the geyser complete all as specified.
S&F in replacement Metal Clad Plug and socket with box 20 Amp with MCB single pole complete fixed properly on wall surface with the provisioning of suitable sizes of bolts, nuts, washer and to connect by using cable PVC insulated copper stranded conductor of size 4 Sqmm all as specified.
Supply and fix in repair Pin Top 15 Amp complete all as specified.
Supply and fixing in repair Metal plug and socket boths 20A single phase 3 pin as per IS 8804 suitable for existing metal clad box complete all as specified.
Material and labour for painting to old steel surfaces of Desert cooler of Air flow capacity up to 5000 Cu M/hr with two coats of synthetic enamel spray paint hammer tone paint of approved colour make ICI paint (Dulax closs), asian paint (Apcolite), Jenson & Nicholson,over one coat of red oxide on external surface and two coats of anti corrosive black paint inside the Body tank and side grills over a coat of Red Oxide on internal surfaces including scraping/rubbing with wire brush on old surface of Desert cooler. and writing of MES No in 25mm height etc complete all as specified and directed by Engineer-in-Charge at site
M&L for replacement of copper conductor cable 40/0.75 Sqmm 3 core of length 3 to 5 m long with plug top 5 Amp inbuilt suitable for desert cooler complete all as specified.
M&L for Replacement of PVC water distributor with PVC pipe and PVC pipe elbow complete for desert cooler upto 5000 CFM all as specified.
M&L for replacement of Fan blade of desert cooler heavy duty MS suitable for 4000/5000 CFT cap complete all as specified.
M&L for replacement of Water lifting submersible pump of head 1.2 m approx suitable for desert cooler as per existing capacity complete all as specified.
M&L for replacement of fan motor with outer ring and nut-bolts for desert cooler upto 5000 CFM copper wounded, three speed complete all as specified.
M&L for Taking down u/s desert cooler motor, cutting of burnt out winding and rewinding with super enamelled copper conductor including fixing of motor to existing location complete all as specified and directed by Engr-in-Charge.
Supply & Fix in repairs wood wool Pad (set of three), minimum weight 0.80 kg, inside panels of desert coolers complete all as directed by EIC.
M&L for Replacement of rusted and leakaged body parts (Water tank) of Desert cooler of 4000/ 5000 CUM/hr capacity as required at site with thickness not less than 16 gauge of sheet.
All as per Item Ser No 32.00 but herein Side lags (Set of three)
All as per Item Ser No 32.00 but herein Top cover
All as per Item Ser No 32.00 but herein Front grill with connection strip
All as per Item Ser No 32.00 but herein Supporting legs with frame and clips incl nuts & bolts of desert cooler.
M&L for taking down fan of any type/make and size carefully from fan hook, dismantling of blades and transporting from any location in side army area to MES E/M store yard for washing throughly of bearing/bush by petrol , washing and cleaning the fan blades , body , canopy etc throughly , provision of new greasing , replacement of worn out/ defective unserviceable parts including fan rod (wherever necessary ) reassembling the same and testing the fan on full load to entire satisfaction of Engr-in-Charge Note:- (i) Replacement of defective / unserviceable parts will be paid separately under relevent items of this schedule(ii) The cost for labour to taking out and refixing the new material is deemed to be inclusive of quoted rates. (iii) Any type of petty items which are not included in this schedule will deemed to be inclusive of quoted rates.
M&L for Hanging carefully ceiling fan in hook and make connection with exsiting point wiring including provision of three core (FRLS)cable not less than 0.75 sqmm of size from ceiling rose or connector to ceiling fan complete all as directed by Engr-in-Charge. Note:- Any petty items like as nut bolts washers & safety pin etc required for hanging deemed to be inclusive of quoted rates.
M&L for Removing rusts/dusts cleaning thoroughly with petrol to the ceiling fan in situ and spray painting with one coat to ceiling fan of any size and type with 1st quality synthetic enamel paint as per exsisting colour to fan body, down rod/ canopy etc and writing the MES number as MES/NT-(No) on the fan body in black paint all as directed by Engineer-in-Charge.
M&L for taking down burnt out ceiling fan of any type and size , dismantling the fan blades ,opening the cover to Cutting the existing copper winding and rewinding the armature (Rotor) with super enamelled copper wire of suitable gauge incl all insulating materials complete and re-assembling the fan, fan blades and hanging in fan hook to the same location by providing three core copper (FRLS) cable not less than 0.75 sqmm from ceiling rose or connector to fan and satisfactory testing on full speed to entire satisfaction of Engineer-in-Charge.Note:- (i) Contractor will produce guarntee letter for rewinding of fan minimum 1 year from the date of installation and testing (ii) The cost of transportation will deemed to be inclusive of quoted rates.(iii) Cost of labour for taking down and refixing will deemed to be inclusive of quoted rates.(iv) Any petty items required for fixing will deemed to be inclusive of quoted rates.
M&L for Turning of fan shaft after re-metalling and welding including cutting threading welding and the materials for exhaust fans of any size complete all as specified.
M&L for Filling (Metalling) the worn out shaft at bush/ball bearing seat by welding and machining for proper fixing of ball bearing/bush of any size of ceiling fan complete all as specified.
S&F in repair of fan blades set of ceiling fan for any sweep of the existing make all as directed by Engineer-in-Charge.
S&F in repair of plastic canopy upper & lower of any size and make of ceiling fan fixed with suitable size of screws all as directed by Engineer-in-Charge.
S&F rubber reels incl shackle clamp, bolts, nuts, washers split pins of appropriate size as required at site all as directed by Engr-in-charge.
S& F ball bearings of suitable size to ceiling fan including testing complete all as specified and directed by Engr-in-charge.
S&F bush bearing made out Gun metal suitable for ceiling fan complete all as directed and specified by Engr-in-charge.
M&L for down rod of 15mm dia GI pipe heavy duty 45 cm long incl machining/ threading/drilling hole of size suitable for nuts and bolts washer and split pin suitable for any type and sweep size of fan complete all as specified.
M&L for Dismantling of 600mm sweep wall mounting Air circulating fan any make for washing thoroughly of bearing/bush by petrol / cleaning of fan blades and body etc ,greasing and oiling complete, re-fixing the same to existing location after painting with synthetic enamel paint of approved make with spray gun of one coat as per exsisting colour , connecting and testing on full speed to entire satisfaction of Engineer-in-Charge of following sizes (i) Replacement of defective / unserviceable parts will be paid separately under relevent items of this schedule(ii) The cost of labour to taking out and refixing the new material is deemed to be inclusive of quoted rates. (iii) Any type of petty items which are not included in this schedule will deemed to be inclusive of quoted rates. of size
All as per Item Ser No 49.00 but 380-450 mm sweep any make
M&L for taking down the burnt out 600 mm sweep wall mounting air ciculator fan any make dismantal the blades ,opening the cover to cutting the existing copper winding and rewinding the armature (Rotor) with super enamelled copper wire of suitable gauge incl all insulating materials varnishing and heating complete and refixing at same location after painting to entire body of wall mounting fan with synthetic enamel paint as per exsisting colour by using spray gun incl satisfactory testing on full speed complete all as directed by Engineer-in-Charge of the following sizes Note:-(i) Cost of items except rewinding will be measured and paid separately under relevent items of this schedule (ii) Quoted rate is deemed to be inclusive of transporting and taking down unserviceable/defective parts.of size
All as per Item Ser No 52.00 but 400-450 mm sweep any make
S&F in repair condenser of 240 volts 2.5 MFD suitable for ceiling fan 1200/1400mm sweep size incl testing complete all as specified.
S&F in repair condenser of 240 volts ,10 MFD suitable for wall mounting air circulating fan 600 mm incl testing complete all as specified.
S&F in repair condenser 240 volts 8 MFD suitable for wall mounting air circulating fan 450 mm incl testing complete all as specified.
S&F in repair Condenser 240 volts 6 MFD suitable for wall mounting air circulating fan 400 mm incl testing complete all as specified.
S&F in repair ball bearings of size suitable for 600 mm sweep Air circulating fan incl testing complete all as specified.
S&F in repair ball bearings of size suitable for 450/400 mm sweep Air circulating fan incl testing complete all as specified.
S&F in repair of MS fan blades for 600 mm sweep Air Circulator fan complete all as specified.
S&F in repair of MS fan blades as per existing for 450/400 mm sweep Air Circulator fan complete all as specified.
M&L for taking down 450mm sweep any make exhaust fan carefully from site & transporting from any location inside Army area to MES E/M store yard for stripping of fan washing thoroughly of bearing/bush by petrol, washing fan blade body etc thoroughly provision of new greasing replacement of worn out/defective unserviceable parts (wherever necessary) assembling the same incl connection by providing three core copper (FRLS) cable not less than 0.75 Sqmm from ceiling rose to fan and testing on full speed to entire satisfaction and fixing at original location complete all as specified. Note :- 1. Replacement of parts/rewinding shall be measured and paid separately. 2. Quoted rate is deemed to be inclusive of transporting and taking down unserviceable/defective parts.
All as per Item Ser No 61.00 but 380 mm sweep any make
All as per Item Ser No 61.00 but 300 mm sweep any make
M&L for Rewinding of the armature of exhaust fan of 450mm sweep exhaust fan any make with super enamelled copper wire of suitable for incl all insulating materials varnishing complete incl satisfactory test run on full speed complete all as specified.
All as per Item Ser No 64.00 but 380 mm sweep any make
All as per Item Ser No 64.00 but 300 mm sweep any make
S&F in repair ball bearings of size suitable for 300 to 450 mm exhaust fan incl testing complete all as specified.
S&F in repair bush bearing made out Gun metal of size suitable for 450 to 300 mm of exhaust fan incl testing complete all as specified.
M&L for Replacement of supporting legs with frame and clips incl nuts & bolts of size suitable for 380 mm sweep size exhaust fan complete all as specified.
M&L for Replacement of supporting legs with frame and clips incl nuts & bolts of size suitable for 300 mm sweep size exhaust fan complete all as specified.
M&L for Replacement of MS fan blades for 450 mm sweep exhaust fan complete all as specified.
M&L for Replacement of MS fan blades for 380 mm sweep exhaust fan complete all as specified.
M&L for Replacement of MS fan blades for 300 mm sweep exhaust fan complete all as specified.
S&F in repairs exhaust fan louvers suitable to any sweep to out side building including making necessary arrangement like ladder/scaff holding etc and drilling of hole for fitting of exhaust fan louvre complete all as directed by Engineer-in-Charge.
S&F in repair PVC insulated copper conductor multicore FRLS 3 core 6 sqmm for 1100V conforming to IS-694:2010 complete all as specified.
M/s B. S. Solanki Builders
vinayandsons
DIWAKAR CONSTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .