Government womens college Thiruvananthapuram modernazation of office Principal room and connected works DSR 2016 with Cost Index 44.12per

Amount

Appendix: A -Renovation works

od10230/2018_2019 : Labour engaged for carefully stacking the files,chairs,tables and racks as directed by the Officer in charge and re-arranging the same after the completion of the work

15.56 : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

15.25 : Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

11.48.2 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

8.2.2.1 : Granite of any colour and shadeArea of slab upto 0.50 sqm

15.57 : Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

6.3.1 : Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With F.P.S. ( non modular ) bricks

14.5.2 : Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 5.5 mm

9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

9.5.1.1 : Second class teak wood35 mm thick shutters

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

50.14.1.1 : Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge.

50.14.1.2 : Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge

14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

14.66.2 : Finish walls with Acryllic Smooth exterior paint of required shade:Old work (One or more coat applied @ 0.90 ltr/10 sqm)

14.69.1 : Varnishing with varnish of approved brand and manufacture:One or more coats with copal varnish

14.70 : Melamine polishing on wood work ( one or more coat)Melamine polishing on wood work ( one or more coat)

14.72 : Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .

14.75 : Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under,including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

9.123 : Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.

9.124.1 : Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge.Non decorative finish

10.11.1 : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11B and K 12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 ( 1 Cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

10.30.1 : Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :4.0 mm thick glass panes

11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.40 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

17.78 : Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.

17.7.3 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

18.58.1.1 : Circular type100 mm nominal dia

19.7.2.2 : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg):With Sewer bricks conforming to IS : 4885

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

50.18.7.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

50.18.8.7.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2

50.18.8.9.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2

50.18.9.9.2 : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2

50.18.9.20.3 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow

50.18.9.22.3 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow

50.18.9.22.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

Appendix: B - Renovation works to tiled roof and ceiling

15.31 : Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

od10231/2018_2019 : Providing and Fixing 0.7 mm thick Aluminium plain sheet (size, shape, etc.. as approved by Engineer in charge) on wooden rafters with wire nails and washers, to pre-cover the roof , etc.. complete up to any pitch in horizontal/vertical or curved surfaces and including cutting to size and shape wherever required as per the direction of the Engineer in charge

od10233/2018_2019 : Reapering with departmental reapers and wire nails 50 mm long at suitable spacing

od82270/2018_2019 : Reapering with 38 x 16 mm teak wood reapers and wire nails 50 mm long at suitable spacing

od10234/2018_2019 : Supplying and fixing Second class Teak wood wrought and put up for roof members including cost and conveyance of materials etc. complete .teak wood

26.19.1 : Providing at all heights, levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical or curved surfaces i/c cutting to size and shape where required as per specifications, detail drawings and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and pproved sealent where required etc. but excluding the cost of purlins, rafters and trusses.0.71 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm.

od13166/2018_2019 : Providing lime mortar bordering to tiled roof about 65 cm2 in section as per the direction of Engineer in charge

od13167/2018_2019 : Providing mortar in lime for fixing hip and ridge tiles including finishing edges as per the direction of Engineer in charge

od13168/2018_2019 : Roofing with departmental MP roofing tiles as per the direction of the Engineer in charge

12.48 : Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

12.49 : Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately )

12.51.1 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)

12.51.4 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Barge board (Upto 300 mm)

26.22.1 : Providing and fixing false ceiling at all heights with integral densified calciumsilicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity less than 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick(galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm oflength 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended fromceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm)i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fullythreadd hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mmof length 3000 mm to be fixed on periphery wall / partition with the help ofplastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.Sscrews. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.

26.23.1 : Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise uctioncoefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043W/m K as per ASTM 518:1991, in true horizontal level suspended on interlockingmetal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm andsecondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanisedmild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge.With 15 mm thick integral densified micro edge light weight calcium silicatefalse ceiling tiles

9.34.3 : Providing and fixing 2nd class teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface.20 mm thick

9.40.1.2 : 2nd class teak wood50 x 20 mm

9.111.1 : Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood50x50 mm ( base and height)

12.57 : Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge

26.43 : Providing and fixing internal wall panels on Light gauge steel frame work with12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on 8mm thick fiber cement board conforming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / tapingscrews / fasteners @ 60cm c/c of approved make, Screws shall be of countersunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of framework to be paid for separately)

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

26.24.1 : Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectanceof 85% (minimum). Non combustible as per BS:476 (part-4), fire performanceas per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especiallyfabricated galvanised mild steel she t 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e.vertical studs ofsize 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceilingchannel section of size 50 x 32m fixed to the floor and soffit at 600mm centersusing 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with10mm bolt. This same channel is then to be fixed in horiziontal direction at600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of50mm thickness is then to be inserted in the slots and finally calcium silicatenon combustible anels/tiles are to be screw fixed with self tapping pan headnickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving aneven groove of 1 mm between the panels. The joints between the panels are tobe duly jointed and finished using recommended jointing calcium silicate basedcompound and fiber joint tape roll 50mm wide (90 metre )roll and two coats ofprimer suitable for panelling as per manufacturer's specification as perdirection of Engineer-in-Charge all complete.With 15 mm thick fully perforated square/butt edge light weight calcium silicatepanels/ tiles

15.60 : Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

Appendix:C- Office Arrangements

od10255/2018_2019 : ;Providing & Fixing Prelam storage made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding &amp; sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge anding.The units are assembled by knock down fittings such as Minifix &amp; Dowels. All the hardware and Hinges are from Hettich/Ebco. PVC edge banding are imported from Rehau or Dolken of Germany.The Storages is fitted with hinged doors with recessed ABS Handles.Size of storage 900x425x1200mmHt&quot;&lt;br&gt; of Godrej/Wipro brand

od10256/2018_2019 : Providing &amp; fixing of Compactors as per following specifications: Constrcution:Rigid upright frame made out of 1.2mm thk CRCA steel box pipe.Upright with 25x50mm rectangular slotted pipe with cladding material of 0.7mm CRCA sheet.Complete construction in knock down design for easy handling &amp; design is scalable to add bays in row wise or column wise subsequently.Shelves:Each unit has 6 loading levels formed by 5 loading shelves with a UDL(Uniform distributed load) of 80Kg capacity , 438mm depth,made of 0.8mm CRCA with stiffner.Shelves are mounted on support brackets &amp; adjustable with a pitch of 25mm. Track Material:Aluminium track material with complete track assembly on self suppported design.making the installation grouting free.25mm thk prelaminated particle board walkway to be provided for easy access.&amp; easily adjustable levellers required to keep platform &amp; track parallel on uneven surfaces.Sloping ramp in aluminium for easy trolley access &amp; reduced tipping hazard.Pulley belt mechanism for reduced noiseless &amp; oil free operation.Ergonomic plastic handle with buit in safety lock mechanism.Central locking to be provided on last unit to lock the entire assembly.Compactor Ht from ground is 2100mm(1985mm body+75mm undercarrriage+40mm channel system).All metal components to be given anti rust surface treatment &amp; powdercoated with epoxy polester powder with a DFT of 60-80 microns.Rate for 3bay drive type with one Single static+one single end + five No twin mobile unit.&lt;br&gt; of Godrej/Wipro brand

od10257/2018_2019 : Providing and fixing Visitor chairs as per the specification metioned below.Back Rest -Medium Back made out of treated ply &amp; moulded PU Foam.Seat -Fixed Seat with Waterfall edge for better comfort &amp; blood circulation.Back/Seat Foam-Moulded PU Foam with density not less than 50-60Kg/m3 .Base-MS Sledge base.Arm Rest -Fixed Armrest with PU arm Pad.Upholstery -Fabrics with 100% polyester.Weight -320 Grams per linear meter.Thickness -222GSM.Back Dimensions :- 470 (Height of seat to Back rest) X 470 (W).Seat Dimensions :- 435 (Depth from lumber point to seat edge) X 490 (W)&lt;br&gt; of Godrej/Wipro brand

od10258/2018_2019 : Providing and fixing Medium back chairs as per the specification metioned below.Back Rest -Medium Back made out of treated ply &amp; moulded HR Foam.Seat -Fixed Seat with Waterfall edge for better comfort blood circulation.Back/Seat Foam-Moulded High Resilience Foam with density not less than 58-61Kg/m3 with tensile strength of 2kgf/cm &amp; tear strength of 1kgf/cm with resilience of .Mechanism:Synchro 1 mechanism for tilting with locking at upright position.Mechanism is BIFMA compliant &amp; tested for 300000 cycles.Gas Lift -BIFMA Compliant Class 3 HP gas lift to absorb seating shocks with a higher stroke length of 120mm which is tested for 100000 cycles.Castors-50mm dia Nyloncastors with twin wheel construction.BIFMA compliant &amp; tested for 100000 cycles.Base-Nylon Base with a pitch circle diameter of 640mm.BIFMA compliant &amp; tested for a static load of 1134kg.Finished in black matt colour.Arm Rest -Poly Propylene Height adjustable Arm rest with PU pad.Upholstery -Fabrics with 100% polyester.Weight -320 Grams per linear meter.Thickness -222GSM.Back Dimensions :- 470 (Height of seat to Back rest) X 470 (W).Seat Dimensions :- 435 (Depth from lumber point to seat edge) X 490 (W)&lt;br&gt; of Godrej/Wipro brand

od10259/2018_2019 : Providing and fixing Medium back chairs as per the specification metioned below.Back Rest -Medium Back made out of treated ply &amp; moulded HR Foam.Seat -Fixed Seat with Waterfall edge for better comfort &amp; blood circulation.Back/Seat Foam-Moulded High Resilience Foam with density not less than 58-61Kg/m3 with tensile strength of 2kgf/cmtear strength of 1kgf/cm with resilience of 60%.Mechanism:Synchro 1 mechanism for tilting with locking at upright position.Mechanism is BIFMA compliant tested for 300000 cycles.Gas Lift -BIFMA Compliant Class 3 HP gas lift to absorb seating shocks with a higher stroke length of 120mm which is tested for 100000 cycles.Castors-50mm dia Nyloncastors with twin wheel construction.BIFMA compliant &amp; tested for 100000 cycles.Base-Nylon Base with a pitch circle diameter of 640mm.BIFMA compliant &amp; tested for a static load of 1134kg.Finished in black matt colour.Arm Rest -Poly Propylene Fixed Arm rest.Upholstery -Fabrics with 100% polyester.Weight -320 Grams per linear meter.Thickness -222GSM.Back Dimensions :- 470 (Height of seat to Back rest) X 470 (W).Seat Dimensions :- 435 (Depth from lumber point to seat edge) X 490 (W)&lt;br&gt; of Godrej/Wipro brand

od10260/2018_2019 : Providing and fixing Highback chairs as per the specification metioned below.Back Rest -High Back made out of treated ply &amp; moulded PU Foam.Seat -Fixed Seat with Waterfall edge for better comfort &amp; blood circulation.Back/Seat Foam-Moulded PU Foam with density not less than 50-60Kg/m3 .Mechanism:Synchro 4 mechanism for tilting with locking at 4 positions.Equipped with Back Tension adjustable knob.Mechanism is BIFMA compliant tested for 300000 cycles.Gas Lift -BIFMA Compliant Class 3 HP gas lift to absorb seating shocks with a higher stroke length of 120mm which is tested for 100000 cycles.Castors-50mm dia Nyloncastors with twin wheel construction.BIFMA compliant &amp; tested for 100000 cycles.Base-Nylon Base with a pitch circle diameter of 640mm.BIFMA compliant &amp; tested for a static load of 1134kg.Arm Rest -2D Armrest with PU arm Pad.Upholstery -Fabrics with 100% polyester.Weight -320 Grams per linear meter.Thickness -222GSM.&bull; Seat :- 460mm width and 470mm depth&lt;br&gt;&bull; Seat to Back rest height :- 650mm.Back Rest Width -500mm.&quot;&lt;br&gt; of Godrej/Wipro brand

od10261/2018_2019 : Providing and fixing Workstations as per the specification mentioned below.Frames :- Partition thickness is 60mmm for stability and with the inside gap between two tile is approximately 50mm for higher wire carrying capacity.Partition ht -1200mm.Frame Horizontals are made of 1mm thick CRCA sheets &amp; the verticals are made of Aluminium Extrusions of 1.5mm thickFrame Horizontals are made of 1mm thick CRCA sheets &amp; the verticals are made of Aluminium Extrusions of 1.5mm thick&lt;br&gt;All the frames will be duly powder coated based on the choice of the Powder Coat colour , as per Customers choice, which will be inline with the Top trims &amp; end trims&lt;br&gt;All the frames are fastened together by means of M6 NUTS &amp; BOLTS . They can be attached to form a 2-way, 3-way or a 4-way configuration. &lt;br&gt;All the Caps viz end, inline &amp; universal &amp; raceway caps are made out of Die-cast Aluminum. These caps also are finished in an epoxy powder coating finish in the same color.&lt;br&gt;All the frames are fitted with M10 leveling bolts.&lt;br&gt;&quot;Top tile MDF Fabric Tile: Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. &lt;br&gt;Bottom Row of Steel Tile: Constructed out of 0.8mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed finishes.&lt;br&gt;Magnetic tile -1No Seat: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice.&lt;br&gt;Whiteboard marker tiles -1No/Seat : Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate with a balancing laminate on the back. Total thickness is 5mm.&lt;br&gt;The skirting/data raceway is hollow and will be mounted on the raceway channels.Raceway :-The raceways are made out of 0.8mm thick CRCA &amp; powder coated. &lt;br&gt;The electrical raceway can be provided below worktop or above worktop, these are hookon type which will be mounted on the verticals. &lt;br&gt;The skirting/data raceway is hollow and will be mounted on the raceway channels&quot;&lt;br&gt;Main Table of size 1500x1350x600x600x740mm(h) completely made up of Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Table Tops are with 25mm thk boards with 2mm PVC edge banding with enhanced scratch resistance supported on 25mm thk. Gable ends are in 25mm thk and 18mm thk Modesty panels. Exposed edges are in 2mm thk PVC edge banding &amp; sealed edges are in 0.8mm thk PVC edge banding. Rubberised wire management groumets to be provided on main tables.One prelam pedestal unit of size 400x470x545mm made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with premium central locking and 1 box drawers &amp; 1 file drawer with roller slide mechanism for added mobility. All the exposed edges are with 2mm PVC egde Imported banding &amp; sealed edges are with 0.8mm thick PVC Imported edge banding.The drawer unit is fitted on castors (optional) for easy mobility. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the drawers.&lt;br&gt; of Godrej/Wipro brand

od10262/2018_2019 : Providing and fixing Manager Cubicles as per the specification metioned below.Frames :- Partition thickness is 60mm for stability and with the inside gap between two tile is approximately 50mm for higher wire carrying capacity.Partition ht -1200mm.&lt;br&gt;Frame Horizontals are made of 1mm thick CRCA sheets &amp; the verticals are made of Aluminium Extrusions of 1.5mm thickFrame Horizontals are made of 1mm thick CRCA sheets &amp; the verticals are made of Aluminium Extrusions of 1.5mm thick&lt;br&gt;All the frames will be duly powder coated based on the choice of the Powder Coat colour , as per Customers choice, which will be inline with the Top trims &amp; end trims&lt;br&gt;All the frames are fastened together by means of M6 NUTS &amp; BOLTS . They can be attached to form a 2-way, 3-way or a 4-way configuration. &lt;br&gt;All the Caps viz end, inline &amp; universal &amp; raceway caps are made out of Die-cast Aluminum. These caps also are finished in an epoxy powder coating finish in the same color.&lt;br&gt;All the frames are fitted with M10 leveling bolts.&lt;br&gt;&quot;Top tile MDF Fabric Tile: Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. &lt;br&gt;Bottom Row of Steel Tile: Constructed out of 0.8mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed finishes.&lt;br&gt;Magnetic tile -1No Seat: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice.&lt;br&gt;Whiteboard marker tiles -1No/Seat : Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate with a balancing laminate on the back. Total thickness is 5mm.&lt;br&gt;The skirting/data raceway is hollow and will be mounted on the raceway channels.Raceway :-The raceways are made out of 0.8mm thick CRCA &amp; powder coated. &lt;br&gt;The electrical raceway can be provided below worktop or above worktop, these are hookon type which will be mounted on the verticals. &lt;br&gt;The skirting/data raceway is hollow and will be mounted on the raceway channels&quot;&lt;br&gt;Main Table of size 1650x750x740mm &amp; side table of size 1350x470x740 completely made up of Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Table Tops are with 25mm thk boards with 2mm PVC edge banding with enhanced scratch resistance supported on 25mm thk. Gable ends are in 25mm thk and 18mm thk Modesty panels. Exposed edges are in 2mm thk PVC edge banding &amp; sealed edges are in 0.8mm thk PVC edge banding. Rubberised wire management groumets to be provided on main tables.One prelam pedestal unit of size 400x470x545mm made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with premium central locking and 1 box drawers &amp; 1 file drawer with roller slide mechanism for added mobility. All the exposed edges are with 2mm PVC egde Imported banding &amp; sealed edges are with 0.8mm thick PVC Imported edge banding.The drawer unit is fitted on castors (optional) for easy mobility. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the drawers.Prelam storage made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding &amp; sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.The units are assembled by knock down fittings such as Minifix &amp; Dowels. All the hardware and Hinges are from Hettich/Ebco. PVC edge banding are imported from Rehau or Dolken of Germany.The Storages is fitted with hinged doors with recessed ABS Handles.Size of storage 900x425x740mmHt&lt;br&gt; of Godrej/Wipro brand

od10263/2018_2019 : Providing and fixing Metal storage of size 900x450x2015 mm with the following specifications.Storage is made up of CRCA having shelves. The storage has equally divided four level adjustable shelves. Each storage door system has an indivial locking mechanism pre-fitted to it. The caracass and shelves are made up of 0.8mm CRCA Duly Powder Coated. The shelf comes with a stiffner duly tested for 40Kg UDL. The storage system to have 4mm thick clear toughened glass with a duly powder coated frame.The powder coating is of 50-60 microns. &lt;br&gt;of Godrej/Wipro brand

od83576/2018_2019 : od50224/2017_2018 : Supply and fix overhead storage racks. The top, side, bottom &amp;amp; shutters and back panels are made of 18mm thick Prelam Particle Board. All the exposed edges are with 2mm PVC egde Imported banding &amp;amp; sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.The units are assembled by knock down fittings such as Minifix &amp;amp; Dowels. All the hardware and Hinges are from Hettich/Ebco. The Storages is fitted with hinged doors with recessed ABS Handles. Godrej/ Wipro or similar make of matching specifications. Furniture of WIPRO/ Godrej OR equivalent specification is required.

od83577/2018_2019 : od50429/2017_2018 : Providing &amp;amp; Fixing 8 level sliding glass door cupboard - 8 , Overall Dimensions of VSDU - 8 shall be 0mm(W)x450mm(D)x1830mm(H). The top shall be Metal top (1 mm add in unit height ) .The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - &amp;apos;D&amp;apos; Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door &amp;amp; less noise .VSDU 8 shall have glass door for visibility of the content . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush &amp;amp; recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 8 shall have 4 no. of adjustable full shelves . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 8 - A4 size box file can be stored vertically on four shelves and clear space above fifth shelf is 220 mm .Furniture of WIPRO/ Godrej OR equivalent specification is required.

od10264/2018_2019 : Providing and fixing Main Table,Side Storage &amp; Pedestal unit as per the specification mentioned below&lt;br&gt; Main table of size 1800x750x740mm with Side table of size 1350x450x740mm completely made up of Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Top are with 25mm thk boards with 2mm PVC edge banding with enhanced scratch resistance supported on 25mm thk. Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding &amp; sealed edges are in 0.8mm thk PVC edge banding.Pedestal unit of size 400x470x545mm made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge banding with premium central locking and one box drawer &amp; one file drawer type with roller slide mechanism for added mobility.Back storage unit of size 900x425x740mm -2Nos made up of 18mm thk. prelam particle board having premium lock with wave key technology. Storage body is made of 18mm thick pre laminated partical Board conforming to IS : 12823. The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding &amp; sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding.&lt;br&gt;The units are assembled by knock down fittings such as Minifix &amp; Dowels&quot; &lt;br&gt;of Godrej/Wipro brand

od10265/2018_2019 : Providing and fixing in position cafeteria Chair with flexi ply seat &amp; back with synthetic veneer laminated.Understructure in MS tubular pipe of 19dia powdercoated in silver grey.&lt;br&gt; of Godrej/Wipro brand

od10266/2018_2019 : Providing &amp; fixing in position Dining table of size 1800x900x740mm with the following specification .Table Top :- The table top is made up of 25mm thick 25mm thick MDF with waterfall top edges finished in PVC Membrane using unique wrap around technology for better aesthetics &amp; long lasting use.Understructure :- Understructure:- The understructure is stainless steel buff finished.&lt;br&gt; of Godrej/Wipro brand

Appendix:D- Principal&apos;s Room and Conference Hall Arrangements

od10268/2018_2019 : Providing and fixing Main table with Joining Top 2900 (L) x 900(W) x 740(H) &amp; with Pedestal(Box+File type) -1No/table:- &lt;br&gt;Table Top: - The table top is Post-laminated for better abrasion and scratch resistance. The Table top is made of Particle Board with 1mm top laminate and 1mm bottom laminate. The overall thickness of the Table top from visible side 54mm. The complete thickness of the table top is minimum 36mm with addition of 18mm baton on the visible side. All exposed edges have 2mm PVC edge banding. It has a dual tone colour with the base colour being black and the top colour to be Walnut Bronze/ Acacia Exodus / Black Cherry.&lt;br&gt;Joining Top :- The Joining top is Post-laminated for better abrasion and scratch resistance. The joining top is made of 36mm Particle Board with 1mm top laminate and 1mm bottom laminate. All exposed edges have 2mm PVC edge banding. The colour of the Joining top is Black.&lt;br&gt;Modesty panel: - The modesty is Post-laminated for better abrasion and scratch resistance. The Modesty is made of 18mm Particle Board with 1mm top laminate and 1mm bottom laminate. All exposed edges have 2mm PVC edge banding. The colour of the modesty is matching to the table top colour.&lt;br&gt;Understructure :- The understructure is 200mm wide on both sides. It is made up of prelam particle board and is black in colour. All exposed edges have 2mm PVC edge banding. The understructure has wire management properties and can carry concealed wires within it.&lt;br&gt;Wire Management :- The understructure has the capability of carrying wires within it. The main table has an access flap arrangement for easy access of switches and sockets for connecting the gadgets. The access flap cover is made of Aluminum extrusion and powder coated upto 50-60 microns.Side Table :- 1350 (L) x 500 x 740mm &lt;br&gt;Table Top: - The table top is Post-laminated for better abrasion and scratch resistance. The Table top is made of 36mm Particle Board with 1mm top laminate and 1mm bottom laminate. All exposed edges have 2mm PVC edge banding. The Table top colour is matching to the main table&lt;br&gt;Modesty panel: - The modesty is Post-laminated for better abrasion and scratch resistance. The Modesty is made of 18mm Particle Board with 1mm top laminate and 1mm bottom laminate. All exposed edges have 2mm PVC edge banding. The colour of the modesty is matching to the table top colour.&lt;br&gt;Understructure :- The understructure is made of 25mm thick prelam particle board and is black in colour. All exposed edges have 2mm PVC edge banding&quot;&lt;br&gt;&quot;.Tower Unit :- 750 (W) x 450 (D) x 1950 (H)-2Nos &amp; 750 (W) x 450 (D) x 740 (H)-2Nos.&lt;br&gt;The tower unit has 2 sections; namely; storage unit below and display unit (above the storage space). The caracass of the tower unit is made of 18mm thick prelam particle board of black colour. The shutters and tower unit top are Post-laminated for better abrasion and scratch resistance. The shutters and top are made of 18mm Particle Board with 1mm top laminate and 1mm bottom laminate. The shutter and top colour is matching to the main table. The Tower back is made of 9mm thick prelam particle board. The storage section is completely handle less and is openable from the top. The hinges are from Hettich. All exposed edges have 2mm PVC edge banding.&lt;br&gt;The storage skirting is of 75mm high, the storage area height is 455mm high and the rest is display area.&lt;br&gt;The display area has glass shutters of 450mm width. The glass considered is 5mm toughened and has hinges and knob for access.&lt;br&gt;of Godrej/Wipro brand

od10269/2018_2019 : Manufacturing supply &amp; fixing of Lounge Area Sofa&lt;br&gt; as per the specification mentioned below.Inner Frameworks of Sofa made out of Plywood &amp; kiln chemical treated tropical meranti wood.&lt;br&gt;Seating cushions in 3&quot;&quot; elastic webbing(350gsm) with diagonal weave &amp; 7&quot;&quot;multilayered foam(32D23D32D HD)with polyester polyfill outer layer(180gsm).Back rest in 2&quot;&quot;elastic webbing(250gsm) with diagonal weave &amp; 3&quot;&quot;multilayered foam(23D)with polyester polyfill outer layer(180gsm).&lt;br&gt;Outer Finish in superior quality leatherette stiched with nylon bonded thread &amp; stained solid wooden legs. SOFA 2 Seater : 1600(l)x900(w)x850(h) (Colour Options in burgundy &amp; Matte Black)&lt;br&gt;of Godrej/Wipro brand

od10270/2018_2019 : Manufacturing supply &amp; fixing in position of center tepoy as per the specification mentioned belowUNDERSTRUCTURE ASSEMBLY: The understructure is an assembly of tubular frames made of M.S. E.R.W.tubes of size 25x25.x1.6mm thk. The ends of the tubular frames are fitted with rubber studs at the top and the bottom.&lt;br&gt;The top studs are fitted with PVC vacuum pads for mounting and gripping the glass top. The tubular frames are powder coated. &lt;br&gt;CENTRE-PIECE TOP : The centre piece top is made from 10mm thick Float glass with rounded corners of size 450 W X 450 D X 425 H. &lt;br&gt;SHELF:pre-laminated particle board 18 mm thk with pvc edge banded.&lt;br&gt; of Godrej/Wipro brand

od10271/2018_2019 : &quot;Manufacturing supply &amp; fixing in position of corner table as per the specification mentioned belowUNDERSTRUCTURE ASSEMBLY: The understructure is an assembly of tubular frames made of M.S. E.R.W.tubes of size 25x25.x1.6mm thk. The ends of the tubular frames are fitted with rubber studs at the top and the bottom.&lt;br&gt;The top studs are fitted with PVC vacuum pads for mounting and gripping the glass top. The tubular frames are powder coated. &lt;br&gt;CENTRE-PIECE TOP : The centre piece top is made from 10mm thick Float glass with rounded corners of size 450 W X 450 D X 425 H. &lt;br&gt;SHELF:pre-laminated particle board 18 mm thk with pvc edge banded.&lt;br&gt;of Godrej/Wipro brand

od10272/2018_2019 : Manufacturing,supply &amp; installation of wardrobe of size 900 (w) X 600 (d) X 1965 (h) with the following specification.The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required.The wardrobe has a mirror of 4mm thick of size 1060 (H) X 288 (w) pasted on the left side door using high quality 3M sticker.&lt;br&gt; of Godrej/Wipro brand

od10275/2018_2019 : Providing and fixing in position cafeteria Chair with flexi ply seat &amp; back with synthetic veneer laminated.Understructure in MS tubular pipe of 19dia powdercoated in silver grey.&lt;br&gt; of Godrej/Wipro brand

od13572/2018_2019 : Providing &amp; fixing in position Conference Table of 10Seater with the following specifications.Table Tops &ndash;made of minimum 25mm thick MDF with waterfall top edges finished in PVC Membrane using unique wrap around technology for better aesthetics &amp; long lasting use. Understructure &ndash; Legs made of 25mm thick standard Black matt colour post formed panels interconnected with 18mm thick standard Black matt colour pre-laminated modesty panels, with height adjustable levelers to take care of uneven floors. Wire Management &ndash; Concealed wire management to take care of basic wiring requirements both horizontally &amp; vertically. For closed configurations, liftable top cover, made of 12mm MDF finished in PVC Membrane, is provided to access the horizontal wire carrier. Vertical wire management is through flexible vertical wire manager. Designed for Flexibility through modular Construction, PVC Membrane Finish Tops for seamless surface, Post formed Legs for safe use, Provision for easy wire management, Upgradeable / reconfigurable for future needs.Modular two seater table top size 1350x530,Single seater table top size -675x530,Half round edge top size -R620.Overall Table size:3940x1240x740mm.&lt;br&gt;of Godrej/Wipro Brand

od10277/2018_2019 : Manufacturing, supply &amp; fixing of Directors Chair as per the specification metioned below.Back Rest -High Back made out of treated ply &amp; moulded PU Foam.Seat -Height Adjustable Seat with Waterfall edge for better comfort &amp; blood circulation.Back/Seat Foam-Moulded PU Foam with density not less than 45-52 Kg/m3 with tensile strength of 1kgf/cm &amp; tear strength of 0.5kgf/cm with resilience of 40%.Mechanism:Synchro 4 mechanism for tilting with locking at 4 positions.Equipped with Back Tension adjustable knob.Mechanism is BIFMA compliant &amp; tested for 300000 cycles.Gas Lift -BIFMA Compliant Class 3 HP gas lift to absorb seating shocks with a higher stroke length of 120mm which is tested for 100000 cycles.Castors-60mm dia PU castors with twin wheel construction.BIFMA compliant &amp; tested for 100000 cycles.Base-Designer Aluminium Base with a pitch circle diameter of 650mm.BIFMA compliant &amp; tested for a static load of 1450kg.Arm Rest -2D Armrest with PU arm Pad.Chair Seat &amp; back to be upholstered with leatherite&lt;br&gt; of Godrej/Wipro brand

od10278/2018_2019 : Providing and fixing Highback chairs as per the specification metioned below.Back Rest -High Back made out of treated ply &amp; moulded PU Foam.Seat -Fixed Seat with Waterfall edge for better comfort &amp; blood circulation.Back/Seat Foam-Moulded PU Foam with density not less than 50-60Kg/m3 .Synchro 1 mechanism for tilting with locking at upright position.Mechanism is BIFMA compliant &amp; tested for 300000 cycles.Gas Lift -BIFMA Compliant Class 3 HP gas lift to absorb seating shocks with a higher stroke length of 120mm which is tested for 100000 cycles..Castors-50mm dia Nyloncastors with twin wheel construction.BIFMA compliant &amp; tested for 100000 cycles.Base-Nylon Base with a pitch circle diameter of 640mm.BIFMA compliant &amp; tested for a static load of 1134kg.Finished in black matt colour.Arm Rest -1D Armrest with PU arm Pad.Upholstery -Fabrics with 100% polyester.Weight -320 Grams per linear meter.Thickness -222GSM.&bull; Seat :- 460mm width and 470mm depth&lt;br&gt;&bull; Seat to Back rest height :- 650mm.Back Rest Width -500mm.&quot;&lt;br&gt; of Godrej/Wipro brand

od10279/2018_2019 : Providing and fixing Medium back chairs as per the specification metioned below.Back Rest -Medium Back made out of treated ply &amp; moulded HR Foam.Seat -Fixed Seat with Waterfall edge for better comfort &amp; blood circulation.Back/Seat Foam-Moulded High Resilience Foam with density not less than 58-61Kg/m3 with tensile strength of 2kgf/cm &amp; tear strength of 1kgf/cm with resilience of 60%.Mechanism:Synchro 1 mechanism for tilting with locking at upright position.Mechanism is BIFMA compliant &amp; tested for 300000 cycles.Gas Lift -BIFMA Compliant Class 3 HP gas lift to absorb seating shocks with a higher stroke length of 120mm which is tested for 100000 cycles.Castors-50mm dia Nyloncastors with twin wheel construction.BIFMA compliant &amp; tested for 100000 cycles.Base-Nylon Base with a pitch circle diameter of 640mm.BIFMA compliant &amp; tested for a static load of 1134kg.Finished in black matt colour.Arm Rest -Poly Propylene Fixed Arm rest.Upholstery -Fabrics with 100% polyester.Weight -320 Grams per linear meter.Thickness -222GSM.Back Dimensions :- 470 (Height of seat to Back rest) X 470 (W).Seat Dimensions :- 435 (Depth from lumber point to seat edge) X 490 (W)&lt;br&gt; of Godrej/Wipro brand

od10280/2018_2019 : Providing and fixing Visitor chairs as per the specification metioned below.Back Rest -Medium Back made out of treated ply &amp; moulded PU Foam.Seat -Fixed Seat with Waterfall edge for better comfort &amp; blood circulation.Back/Seat Foam-Moulded PU Foam with density not less than 50-60Kg/m3 .Base-MS Sledge base.Arm Rest -Fixed Armrest with PU arm Pad.Upholstery -Fabrics with 100% polyester.Weight -320 Grams per linear meter.Thickness -222GSM.Back Dimensions :- 470 (Height of seat to Back rest) X 470 (W).Seat Dimensions :- 435 (Depth from lumber point to seat edge) X 490 (W)&lt;br&gt; of Godrej/Wipro brand

J and J ASSOCIATES

Bidder Name

J and J ASSOCIATES

RAJESH N D