REPAIRING AND RENOVATION OF ADARSH NIVASI SCHOOL(BOYS) AT UKAI, TA:SONGADH, DIST :TAPI-VYARA

NAME OF WORK : REPAIRING AND RENOVATION OF ADARSH NIVASI SCHOOL(BOYS) AT UKAI, TA:SONGADH, DIST :

BILL OF QUANTITIES

Item Description of Item (With brif Specification And Reference to Book of Rate in

Quantity Unit Amount

No. Specifications) Figures

1 Demolition and disposal of unserviceable materials with all lead and lift.(i) 65.05 CMT.

Cement concrete.

2 Demolition including stacking of serviceable materilas and disposal of 9.90 CMT.

unserviceable materials with all lead and lift. (i) R.C.C. work

3 Demolition of Brick work and stone masonry including stacking of serviceable 12.42 CMT.

materilas and disposal of unserviceable materials with all lead and lift.(ii) In

4 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable 4.00 SMT.

materilas and disposal of unserviceable materials with all lead and lift.

5 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including 26.00 EACH

chowkhats architraves, holdfasts and other attachment etc. complete and stacking

them within all lead and lift.(ii) exceeding 3 Sq.M. in area.

6 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and 80.00 RMT.

clamps including stacking the materials with all lead and lift ( for any dia, of pipe)

7 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, 8.00 EACH

flushing tank etc. including stacking the materials with all lead and lift.

8 Removing and scraping of old deteriorated plaster of any thickness fromm wall / 125.25 SMT.

R.C.C member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

9 Providing and laying cement concrete 1:2:4 (1- Cement :2- Coarse sand : 4- 0.50 CMT.

graded stone aggregates 20 mm nominal size) and curing complete including cost

of formwork in (A) Foundation and Plinth (A) PCC

10 Providing and laying controlled cement concrete work M200 and curing complete 8.28 CMT.

including the cost of form work but excluding the cost of reinforcement of

reinforced concrete work in All Types of Wall Pardi, Walls

11 Providing and fixing TMT bars Fe-500D steel reinforcement for R.C.C. work 677.40 Kg .

including binding, bending and placing in position complete upto floor two level

,Ground Floor , First floor , Terrace Floor All Floor Level.

12 Brick work using common brunt clay building bricks having crushing strength not 4.14 CMT.

less than 35 kg/sqcm. in foundation and plinth in cement mortar 1:6 (1 cement :6

fine sand) etc.comp. (B) Conventional All Floor

13 Half brick masonry in common brunt clay building bricks having crushing 18.00 SMT.

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in (B) Conventional , All Floor

14 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of 72.00 SMT.

single or Full/half brick walls for interior plastering upto floor all level and

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) mixing of

water proofing plaster SBR. All Floor

15 20mm thick sand faced cement plaster on walls upto height 10 metres above 145.05 SMT.

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

with mixing of water proofing plaster SBR All Floor

16 Providing and laying polished Granite Slab 18mm thick in Flooring,Risers of 46.92 SMT.

steps, Dedo, window sill, jembs and pillars laid 20mm thick Cement Mortar 1:4 (1-

Cement : 4-Coarse Sand) fixing with adhesive and jointed with Grey Cement

Slurry including full molded round front edges , rubbing and polishing etc.

complete.Unit rate of 1 Sq.Mt.

17 Providing and laying Virtified tiles 8 to 10 mm thick , 24'' x 24'' in flooring 8.00 SMT.

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement.

18 Providing and laying Virtified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers 8.00 SMT.

of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand)

and jointed with white cement slurry,

Item Description of Item (With brif Specification And Reference to Book of Rate in

Quantity Unit Amount

No. Specifications) Figures

19 Providing and fixing flush door both sides laminated andshutter fabricated from 35 10.08 SMT.

mm thick solid core malemine faced three layered pre laminated flat pressed wood

based exterior grade bonded BWP/BWR synthetic resin having stamped IS

grade I type II including three coats of lacquer polishing to exposed wooden

surfaces and Stainless steel decorative type designs fixtures / fastening 2Nos.

Handles, 2Nos. Aldropes, towerbolt etc. as per architectural detailed drawing and

as directed by engineer in charge..

20 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter 10.08 SMT.

having extra reinforcement on sides & edges in polish finish. The core of the

shutter & frame is to be filed up with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking hinges & fintures.

The whole FRP frame & shutter is to be water proof weather proof, termite proof

& resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium S.S fixtures & fastenings & fastener sleeve.

21 Providing and fixing, repairing of door & window 35 mm thick shutters for Doors, 125.40 SMT.

windows and clear story windows and 4mm frosted glass including Two coats of

oil paint to wooden surfaces and Stainless steel decorative type designs all

necessary fixtures / fastening with ancore fastening of old granite or teak wood

frame all labour etc.as directed by engineer in charge.

22 Providing and fixing window having extruded aluminum Colour Powder Coated 15.30 SMT.

section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt,

horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.0.659

Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm

@ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window

23 Providing and fixing standared extruded of alluminium section of size 63mm x 2.16 SMT.

38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for

24 Providing and fixing standared extruded of alluminium section of size 63.50 x 1.50 SMT.

38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour Powder Coated alluminium

frame with 5 mm thick transparent bronze colour tinted float glass as details etc

complete for Fix window. any design

25 Providing and fixing Teak Wood Frame 50 x 75 x 35 mm with 19mm thick ply 7.20 SMT.

shuttur with both sides laminated and shutter fabricated from 19 mm thick

including three coats of lacquer polishing to exposed wooden surfaces and

Stainless steel decorative type designs fixtures / fastening 2Nos. Handles, 2Nos.

Aldropes, towerbolt etc.including I.T.W. as per architectural detailed drawing and

as directed by engineer in charge..

26 Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats 183.60 Kg.

at required spacing and frame alround square or round headed bolts and nuts or by

screws.including applying a priming coat of red lead paint and two coats of oil

painting etc complete (A)Plain grill

27 Removing old colour by a washing and scraping and sand papering the wall 661.92 SMT.

surface smooth including necessary repairs to scratches complete and Wall

painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Item Description of Item (With brif Specification And Reference to Book of Rate in

Quantity Unit Amount

No. Specifications) Figures

28 Removing old colour by a washing and scraping and sand papering the wall 375.70 SMT.

surface smooth including necessary repairs to scratches complete and Priming:

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended.Minimum 4-6 hours duration is

required between each coat of weather shield max paint Finishing wall with

weather proof max exterior paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

29 Applying priming coat over new steel and other metel surface and wooden window 121.50 SMT.

and door after and including preparing the surface by throughly cleaning,

oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming paint brushing red lead. and

Painting two coats (excluding priming coat) on new steel and other metal surface

with enamel paint, brushing, interior to give an even shade including cleaning the

surface an even shade including cleanicn the surface of all dirt, dust and other

foreign matter.

Item Description of Item (With brif Specification And Reference to Book of Rate in

Quantity Unit Amount

No. Specifications) Figures

30 Steel work welded in built up sections, framed work including cutting, hoisting, 9.12 Quintal

fixing in position and applying a priming coat of red lead paint :-

(A) In beams and joints channels angles, column, tees, flats with connecting plates

or angle cleats as in main and cross beams, hip and jack rafters, purlins connected

to common rafters and the like.

31 Providing and laying integral cement based water proofing treatment including preparation 433.66 SMT.

of surface as required for treatment of roofs, balconies, terraces etc. consisting of

following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with proprietary water proofing compound comforming to IS:2645 over the

R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with

50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with proprietary water

proofing compound conforming to IS:2645

(c) Crack Repairs:-Crack filling using fiber reinforced polymer modified mortar after

openning crack in "V" grove, Making Surface dust free, with a bond coat of polymer as

per the data sheet for crack repairing cracks less than 10mm,brick bats is finally covered

by jointless cement plaster 20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the vertical surface of the parapet

& other adjoining wall up to height of about 300 mm in a shape of quarter round vata Incl.

curing etc. Comp. With average thickness of 120 mm and minimum thickness at khurra as

65 mm.(d) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to be down in order

and as directed and specified by the engineer-in-charge. With average thickness of

mm and minimum thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

NOTE :- (1) The whole work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma duly stamped (2) The

rate shall include for work at all floors & conducting water proof test as directed.

Unit Rate of 1 Sq.Mt.

32 Providing and laying broken chine mosaic flooring for terrace using 12 433.66 SMT.

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and extending them upto

cm along the wall,clearing with water and oxalic acid etc. as directed.

33 Providing & fixing colouron galvaniced steel, zinc / aluminium alluscoated sheet 117.60 SMT.

0.80 mm. thick roofing fixed with gslvanised grom J or L hook bolts and bolt 8mm

dia with bituman and impet washer filled withwhite lead etc. Excluding the cost of

purlins rafter and trusses.

34 Providing & Fixing 2 mm thick Solid Polycarbonate sheet for expation joint cover 47.40 SMT.

& side wall expation joint covered with surface of the sheet is coated with an anti-

UV Co-extrusion layer having good weather resistance, it can maintain its optical

properties and mechanical performance for a long time. Fasting is usually done by

screws. , The fastening screws should be inserted about 150 mm apart and 200mm

apart Along the supporting wall or rcc mamber or internal purlin and edge

pulin.All fixing holes with diameter at least 2 mm larger than screw must be

predrilled into each screw location. The screws should be 6mm diameter with

length according to sheet thickness and corrosion resistant, with at least heavy

duty hot dripped galvanized or stainless steel. Excluding the cost of purlins rafter

and trusses with scaffolding.

Item Description of Item (With brif Specification And Reference to Book of Rate in

Quantity Unit Amount

No. Specifications) Figures

35 Providing and fixing rebar of following diameter using chemical grout of 300.00 NOS.

Swanchore/Hilti/Fischer or equivalent make including cost of all

equipments, tools, material, labour, etc. Standard procedure as

mentioned in manufacturer's specifications shall be strictly followed, which shall

be submitted and got approved from the authority prior to start of work.

The rate shall also include cost of drilling of hole of required diameter and

depth as mentioned in manufacturer's specification, cleaning the hole with

required air blower and other necessary tools and tackles, positioning, providing

and grouting chemical, allied fixtures and fasteners, etc. but excluding the cost

of reinforcing bar etc. complete. Item includes necessary scaffolding, staging,

labour, tools and equipments, etc. complete as directed by the engineer-in-

charge. 8 MM DIA BAR,10 MM DIA BAR,12 MM DIA BAR

36 Crack Repairs:-Crack filling using fiber reinforced polymer modified mortar after 120.00 RMT.

openning crack in "V" grove, Making Surface dust free, with a bond coat of

polymer as per the data sheet for crack repairing cracks less than 10mm

37 Providing and fixing wash down water closet (European type, W.C. Pan) with 2.00 No

integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1

(1-Cement : 1-fine sand) inculding Providing and fixing plastic seat and cover for

wash down water closer with C.P. brass hinges and rubber buffers. (B) Black

plastic seal and cover inculding of Providing and fixing 12.5 Litres low level

flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such

as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene

float, C.P brass handle unions and couplings for connections, with inlet, outlet and

overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes

in walls and making good the same connecting the flush bend with cistern and

closet (overflow pipe to be measured and paid for separately)(A) Vitreous China

(I) In white colour . (A) vitreous China Pattern :(i) in white colour

38 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 4.00 No

580mm Including Providing and fixing 100mm size P or S trap for water closet

squatting pan including jointing the trap with the pan and soil pipe in cement

Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. Including of Providing

and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand)a, pair of white

vitreous China 250mm x 130mm x 30mm footrest to long pattern squatting pan

water closet. (A) Vitreous China.(I) Long pattern = White colour

39 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. 2.00 No

brackets painted white including sutting holes and making good the Providing and

fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.,Providing and fixing

pillar tap, capstan head, screw down high pressure with screws, shanks and back

nuts. (i) 15mm dia.,Providing and fixing brass screw down stop tap.(A) 15mm

dia..(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In

40 Providing and fixing Urinal of approved quality including connection with trap 2.00 No

and with integral longitudinal flush pipe.(A) Squating plate pattern white

earthenware 550mm x 300mm. , Providing and fixing C.P. brass waste for

washbasin or sink. (A) 32mmdia.,Providing and fixing pillar tap, capstan head,

screw down high pressure with screws, shanks and back nuts. (i) 15mm

,Providing and fixing brass screw down stop tap.(A) 15mm dia.

41 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter 6.00 No

with jali of the following nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and making good the walls.

42 Providing and fixing screw down bib taps of following size.(A) Brass screw down 10.00 No

bib tap polished bright. (i) 15mm dia.

43 Providing and fixing Gun metal check or non-return fullway wheel valve. 25mm. 2.00 No

44 Providing and fixing Gun metal check or non-return fullway wheel valve. 40mm. 2.00 No

45 Providing and fixing chromium plated brass half trun flush cock of approved 6.00 No

quality including fixing in pipe line etc. complete.(ii) 25mm dia.

Item Description of Item (With brif Specification And Reference to Book of Rate in

Quantity Unit Amount

No. Specifications) Figures

46 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal 2.00 No

47 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( 24.00 RMT.

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

48 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( 15.20 RMT.

SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

49 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( 20.00 RMT.

SCH- 40) for cold water Including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

50 Providing, laying and jointing in true line and level 110mm diametre U.P.V.C 90.00 RMT.

(Type B) conforming to IS 13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

51 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and 2.00 No

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type

52 Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm 2.00 No.

including 500mm x 450mm C.I. horizontal grating wih frame complete.

53 Constructing brick masonry chamber for underground C.I. Inspection chamber and 2.00 No

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand

:4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

54 Providing laying (to level or slopes) and jointing reinforced concrete Light duty 10.00 RMT.

non-pressure pipes I.S. class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete. (B)

55 Providing laying (to level or slopes) and jointing reinforced concrete Light duty 10.00 RMT.

non-pressure pipes I.S. class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete.(C)

56 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 4.00 No. 101.90

57 Providing and fixing in position cowel went to pipes.(C) 100mm dia 2.00 No. 505.17

58 Providing erecting and fixing double coated PVC. (ISI) water tank of required 4000.00 LIT.

capacity each with all necessary fittings and connection etc. complete on terrace.

Rupees TwentyTwo Lakh NinetyThree Thousand Eight Hundred SixtyThree Paise TwentyEight Only

Item Description of Item (With brif Specification And Reference to Book of Rate in

Quantity Unit Amount

No. Specifications) Figures

An amount of Rs.52,327.36 (Rupees Fifty Two Thousand Three Hundred Twenty Seven Paise Thirty Six Only ) towards estimated

salvage value of dismantelled materials likely to be available from dismentalling the existing structure shall be recovered from the 1st

R.A. Bill of this work irrespective of the quantity actually received on site.

I we am / are willing to carry out the work at …................................ % above/ Below percent ( Should Be writen in figures And words)

of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated Amount Put to tender. 22,93,863.28 Estimated Amount Put to tender.

Deduct…........ % Below Deduct…........ % Below

In Words In Words

(1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no

extra payment shall be made.

(2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3) GST and Income tax TDS will be deducted at a source while making payments of bills

(4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

(5) An amount of Rs.52,327.36 (Rupees Fifty Two Thousand Three Hundred Twenty Seven Paise Thirty Six Only ) towards estimated

salvage value of dismantelled materials likely to be available from dismentalling the existing structure shall be recovered from the 1st R.A. Bill

of this work irrespective of the quantity actually received on site.

Signature of Bidder

Executive Engineer

Tapi ( R&B) Division