Provide Facility under RPWD Act-2016 like Low Height Drinking Water Stand, Alarm System, Emergency Exit Road, Brailes Marking Tactile Path etc. in ITI Building At.Siddhpur, Dist.Patan

Name of Work :-

Provide Facility under RPWD Act-2016 like Low Height Drinking Water Stand, Alarm System, Emergency Exit Road,

Braile's Marking Tactile Path etc. in ITI Building At.Siddhpur, Dist.Patan

Bill of Quantity

It Quantities Item of Work Estimated Rate Unit Total amount

It Quantities Item of Work Estimated Rate Unit Total amount

No. estimated according to

but may Rs. In In Words Estimated

be more Figures. Qty.

1 1.00 Providing and Fixing CERA Cruse Set which includes 66,616.67 #NAME? No.

E.W.C. Pan 710x370x770mm with Soft close seat cover,

Wall Hung Wash basin 665x545x190mm, Single lever

Faucet, Wall Mounted Grab bar 600mm Long, Wall

Mounted Hinged Hand Rail 750x100, Bottle Trap 300mm,

Toilet Paper Holder with fixing it on the site at required

position with necessary other materials & Labour etc.

complete or as directed by Engineer in charge.

2 4.00 Providing and fixing Gun metal check or non-return full 186.83 #NAME? No.

way wheel valve.

3 2.00 Providing and fixing Gun metal check or non-return full 420.63 #NAME? No.

way wheel valve.

4 138.00 Dismantling tiled of stone floors laid in mortar including 51.45 #NAME? Sqm

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.

5 12.00 Demolition including stacking of serviceable materials 1,133.89 #NAME? Cum

and disposal of unserviceable materials with all lead and

(i) R.C.C. work

6 114.00 Providing and fixing 15 mm thick 300 mm x 300 mm 1,967.18 #NAME? Sqm

Tactile warning tiles (Attention Tiles i.e. Tactile Warning

Surface Indicator (TWSI) of Johnson Endura Tac Botton

Yellow plus or equivalent make in flooring laid on 20 mm

thick cement mortar 1:6 ( 1 Cement : 6 Coarse sand) on

new surface and jointed with cement slurry including

finished with flush pointing & cleaning the surface for all

floors as per detailed drawing etc. completed as directed

by Architect or Engineer in charge. These tiles shall be

Anti Skid, chemical resistant, Fade Proof, Frost - Heat &

Weather proof, High Flexural Strength, Highly durable,

Stain resistance. All Tactile warning tiles meet the

specific size and dimension standard as per required by

7 18.00 Providing and fixing conspectus tape 50 mm width on 68.18 #NAME? Rmt

treads of staircase including cutting, pasting etc. as per

harmonised guidelines complete in all respects on the

entire satisfaction of engineer in charge.

F:\Tender 2026-27\NIVIDA-14\DTP ITI Sidhpur (RPWD Act\DTP ITI Sidh. (RPWD) Sch.B Page 1 of

It Quantities Item of Work Estimated Rate Unit Total amount

It Quantities Item of Work Estimated Rate Unit Total amount

No. estimated according to

but may Rs. In In Words Estimated

be more Figures. Qty.

8 126.00 Providing and fixing coloured self adhesive PU Tactile 4,540.46 #NAME? Sqm

tile, ground surface indicators of Polyurethane of size

300 mm x 300 mm for guiding / warning to the visually

visitors in the center / side of the pedestrian / approach

pathway as per specification and guidelines complete in

all respect to the entire satisfaction of Engineer in charge.

9 60.00 Providing and fixing Acrylic multilingual braille (raised 1,363.50 #NAME? No.

dots) DIRECTIONAL SIGNBOARDS of size 225 x

mm designed as per accessibility standards and having

3.5 mm thick acrylic base plate with Upper Case San

Serif words made of white acrylic non glare cut out letters

of height 15 mm raised not less than 0.8 mm above base

plate and the equivalent word written in Gujarati, English

or Hindi non glare acrylic cut arrow pointing in the require

direction. Each signboard to be fixed as per

manufacturers specifications on the wall at the approved

location and at a height of 1200 mm from Floor level

complete as per design / specifications and guidelines as

per entire satisfaction of the Engineer in charge.

10 30.00 Providing and fixing Braile indicator of size 170 mm x 35 784.01 #NAME? Rmt

mm for hand rails of the approved design and Hame

have braille dots raised 0.5 mm above the base plate to

be installed at specific locations as per direction of

Engineer in charge.

11 2.00 Providing and fixing tactile layout plan of size 900 mm x 40,582.35 #NAME? No.

600 mm as approved design, made of 3.0 mm thick

acrylic non glare base plate and non glare cut out

symbols with Braile on which individual facility points, like

inquiry, reception, restrooms, medical room / first aid,

cafeteria or breakout area, lounge, meeting room,

conference room etc. present the respective floor with

pictograph wherever needed all in tactile raised by

minimum of 1 mm to 2 mm in various colours to make it

legible for seniors, partial vision impaired etc. All the

facility name should be in Braile, along with Gujarati,

English or Hindi. The entire block of tactile signs should

be mount on wall for easy reading. The map to be

installed at specified locations and installed at height of

800 mm from ground level complete in all respect as per

Harmonized guideline & satisfaction of Engineer in

F:\Tender 2026-27\NIVIDA-14\DTP ITI Sidhpur (RPWD Act\DTP ITI Sidh. (RPWD) Sch.B Page 2 of

It Quantities Item of Work Estimated Rate Unit Total amount

It Quantities Item of Work Estimated Rate Unit Total amount

No. estimated according to

but may Rs. In In Words Estimated

be more Figures. Qty.

12 2.00 Providing and fixing of acrylic, non-glare, tactile audio 46,712.50 #NAME? No.

pictorial building layout as per the approved size, design

and make, having 3 mm thick acrylic non glare base plate

of the approved colour and non glare acrylic cut out

symbols raised 3 mm above base plate and Grade - 2 /

Grade - 1 Braile to be integral with the sign face and be

raised 0.5 mm above base plate. The map to be installed

at the specified location as per accessibility standards

shall be oriented to the position of the viewer and to be

installed at the height of 800 mm from the finished

ground / floor level and using the necessary hardware

specified by the manufacturer and to be installed

complete as per design / specifications and guidelines as

per the entire satisfaction of the engineer in charge.

13 1.00 Providing and Supplying Superio Aluminium Wheel Chair 25,250.00 #NAME? No.

With fixed Wheels & Plastic Rim, Fixed Armrest,

Foldable Weight Bearing Capacity 110 Kg (Multicolour)

For Handicap Person as per required specifications and

guidelines as per the entire satisfaction of the engineer in

14 66.00 Wall painting (two coats) with plastic emulsion paint of 88.39 #NAME? Sqm

approved brand and manufacture on undecorated wall

surface to give an even shade including thoroughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

15 66.00 Applying two coats of Birla or Asian acrylic lapy ( putty) 40.59 #NAME? Sqm

& two coats of primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand

papered smooth.

16 30.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 1,472.91 #NAME? Sqm

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismantling of existing

flooring and jointed with color cement slurry including

finished with flush pointing & cleaning the surface etc.

complete for Any shade

17 42.00 Providing and laying white glazed tiles 6mm thick in 964.48 #NAME? Sqm

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

F:\Tender 2026-27\NIVIDA-14\DTP ITI Sidhpur (RPWD Act\DTP ITI Sidh. (RPWD) Sch.B Page 3 of

It Quantities Item of Work Estimated Rate Unit Total amount

It Quantities Item of Work Estimated Rate Unit Total amount

No. estimated according to

but may Rs. In In Words Estimated

be more Figures. Qty.

18 15.00 Providing laying and jointing in true line and level 15mm 72.65 #NAME? Rmt.

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

19 15.00 Providing laying and jointing in true line and level 40mm 148.12 #NAME? Rmt.

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

20 14.00 Providing and laying Mirror Polished Black Granite 2,688.68 #NAME? Sqm

Marble stone slab 18 mm (Average) thick for stair steps

and riser as per design incl. full moulded round front

edge in trade of steps laid on 20 mm thick cement mortar

1:6 (1 -cement : 6 coarse sand ) jointed with grey cement

slurry including rubbing and polishing etc. complete For

Doors / Windows Sill & Jams Cladding

21 24.00 Providing 15mm thick cement plaster in single coat on 188.98 #NAME? Sqm

fair side brick/concrete wall for interior plastering up to

floor two level and finished even and smooth in

(1) cement mortar 1:3 (1 cement; 3 coarse sand ).

22 16.00 Providing and fixing AISI 316 Grade stainless steel 3,663.98 #NAME? Rmt.

knock down railing system comprising 50mm Dia

railing fixed on 38mm Dia SS Balustrade of 845mm

height placed at maximum 1200mm C/C

distance along with three SS horizontal members of

19mm Dia connected at the side of baluster with SS

brackets. The balustrade shall be mounted on floor

with base plate using specially designed anchor

fasteners and concealed by AISI 316 Grade SS

base cover cap (Wall thickness of pipes shall be

taken as 1.50mm along with all visible component

developed in high grade SS and wherever required,

joints to be filled with bushings for extra strength)

F:\Tender 2026-27\NIVIDA-14\DTP ITI Sidhpur (RPWD Act\DTP ITI Sidh. (RPWD) Sch.B Page 4 of

It Quantities Item of Work Estimated Rate Unit Total amount

It Quantities Item of Work Estimated Rate Unit Total amount

No. estimated according to

but may Rs. In In Words Estimated

be more Figures. Qty.

23 50.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter 700.74 #NAME? Sqm

locking concrete block 60mm thick with grade of concrete

M300 pneumatic compressed / vibrated mechanically

and as per approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for levelling and filling

the joint with sand in proper line and level as per

guidelines of IRC : SP 63-2018 etc. Complete..

24 5.00 Providing and laying cement concrete 1:4:8 (1 cement; 4 2,660.31 #NAME? Cum

coarse sand; 8 hand broken stone aggregate 40mm

nominal size) and curing complete excluding cost of form

(A) Foundation and plinth.

25 19.00 Providing and laying cement concrete 1:2:4 (1 cement; 2 3,575.49 #NAME? Cum

coarse sand; 4 graded stone aggregate 20mm nominal

size ) and curing complete excluding cost of form work in

(A)Foundation and plinth.

26 5.00 Brick work using common burnt clay building bricks 3,739.74 #NAME? Cum

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement :

(B) Conventional Bricks

27 4.00 Providing and fixing screw down bib taps of following size. 186.83 #NAME? No.

(A) Brass screw down bib tap polished bright.

28 2.00 Providing and fixing Urinal of approved quality including 1,706.08 #NAME? No.

connection with trap and with integral longitudinal flush

(A) Squating plate pattern white earthenware 550mm

29 3.00 Providing and fixing PVC SWR Nahni trap IS 14735 for 614.19 #NAME? No.

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making

good the walls.

30 2.00 Dismantling santtary fittings like wash basin . W.C. pan 433.96 #NAME? No.

Indian and European type, flushing tank etc. including

stacking the materials with all lead and lift.

31 70.00 Providing and Fixing Size : 1200 x 100 x 100 x 15 mm U 1,111.00 #NAME? No.

shape Corner E=Rubber Reflective Guards (4.15 Kg

Weight) with yellow reflective patti fixing on RCC/brick

surface including all fitting and material charges. It shall

be chemical resistant, fade proof, frost-heat & weather

proof, high flexural strength, highly durable, stain

resistant as per detailed drawing etc. complete as

directed by Architect/Engineer in Charge

F:\Tender 2026-27\NIVIDA-14\DTP ITI Sidhpur (RPWD Act\DTP ITI Sidh. (RPWD) Sch.B Page 5 of

It Quantities Item of Work Estimated Rate Unit Total amount

It Quantities Item of Work Estimated Rate Unit Total amount

No. estimated according to

but may Rs. In In Words Estimated

be more Figures. Qty.

32 2.00 Providing and Arranging Surgi hub 17 inch 3 Seater Mild 15,150.00 #NAME? No.

Steel Patient Waiting Chair with Cushion, premium

quality 3 seater airport chair having seat and back made

from CRCA tubular frame welded with perforated die

moulded CRCA sheet, base frame made from round

tubular welded with horizontal beam, two side armrest

welded with frame including finishing metal parts with

epoxy polyester powder coating of 50 micron thickness

including all materials and labour etc. complete as per

drawing and instruction of Engineer-in-Charge.

33 2.00 Providing and supplying STAIRWAY EVACUATION 55,550.00 #NAME? No.

CHAIR evacuation chair for PWD person with

Passenger Safety Belts (Head, Chest, Thigh, Foot),

Photoluminescent Signage, Adjustable patient head

restraint, Wall Mounting Brackets, Friction tracks

(Evac+Track technology), Heavy duty wheels, Fold away

grip handle/footrest, Footrest, Dual position seat and

Dust Cover and as directed by Engineer in charge.

34 2.00 Providing and supplying Folding Wheelchair (Alite Pro 19,695.00 #NAME? No.

BF) (50 cm width) with Lightweight, Adjustable Height &

Flip-Back Armrest, Detachable Leg Rest, removable

spoke wheels (quick-release axle), Padded Nylon

Upholstery, & Wide Castor Wheels for Easy Navigation,

Transit Wheels, Half-Folding Backrest self propelled

model and attached armrest and footrest with 120 Kg

load bearing capacity chair and as directed by Engineer

35 30.00 Providing and fixing Stainless Steel Grade-304 kick plate 1,020.10 #NAME? No.

of 150 mm height and width as per door size. The plate

shall be fixed to door shutters complete with screws,

polishing and finishing.

36 25.00 Road marking with hot applied thermoplastic paints with 367.72 #NAME? Sqm

reflectorising glass beads on bitumen surface providing

and laying a hot applied thermoplastic compound 2.5 mm

thick including reflectorising glass beads @ 250gms per

sqm area, thickness of 2.5mm is excluding of surface

applied glass beds as per IRC:35-2015. The finished

surface to be level, uniform and free from streaks and

holes. zebra Patta /bump Patta lane/ centre line/ edge

line/cut Patta. The white colour marking should provide

luminance coefficient on cement road shall be min

mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day time.

The marking should meet the performance criteria for

night time reflectivity, wet reflectivity and skid resistance

as mentioned in the section-15 of IRC 35-2015. Warranty

for the Retro reflectivity should be two years.

F:\Tender 2026-27\NIVIDA-14\DTP ITI Sidhpur (RPWD Act\DTP ITI Sidh. (RPWD) Sch.B Page 6 of

It Quantities Item of Work Estimated Rate Unit Total amount

It Quantities Item of Work Estimated Rate Unit Total amount

No. estimated according to

but may Rs. In In Words Estimated

be more Figures. Qty.

37 50.00 Providing Corrugated Colour Coated G.I. sheet of class-3 734.19 #NAME? Sqm

roofing fixed with glavanished iron J or L Hooks, Bolts

and nuts 8mm diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead

complete excluding the cost of purlins, Rafters and

(1) 0.50 to 0.80 mm thick sheet.

38 12.50 Steel work, welded in built up sections framed work 9,108.48 #NAME? Qtl.

including cutting, hoisting, fixing in position and applying

a priming coat of red lead paint. (A) In beams and joists,

channels angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and the like

I/We am/are willing to carry out the work at …………% Above / Below percent (Should be written in figures and

words) of the estimated rates mentioned above. Amount of my / our tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs……………………. Put to Tender Rs…………………….

Add ……..…. % Above Rs……………………. Deduct .………. % Below Rs…………………….

Net Rs……………………. Net Rs…………………….

* (Please strike out whichever is not applicable)

Note 1 :- All work shall be carried out as per public works department Handbook and other specifications of

Division or as directed.

Note 2 :- All the columns is Schedule should be filled in ink and the total of the entries in the last column should be

struck by the contractor under his signature.

Note 3 :- Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and

hold good for work under all conditions, site, moisture, weather etc.

Note 4 :- To be continued on additional sheets, if found necessary.

Dated Signature of the contractor

Deputy Executive Engineer

Road & Building Sub Division

F:\Tender 2026-27\NIVIDA-14\DTP ITI Sidhpur (RPWD Act\DTP ITI Sidh. (RPWD) Sch.B Page 7 of