Special Repair Work of Interior Color and Plaster Work at Taluka police line Block No - B1 & B2, City Police line Block C-04 and D-02 units, Chawadi Chowki, & Construction of Parking Shed at Taluka Police Station and supplying & Erecting of streetlight at wankaner taluka police station Dist: Morbi. (Including electrification) (SBD) (SOR 2024-25) (3rd Attempt)

Name of Work :- Special Repair Work of Interior Colour and Plaster Work at Taluka police line Block No - B1 & B2, City Police line

Block C-04 and D-02 units, Chawadi Chowki, & Construction of Parking Shed at Taluka Police Station, and supplying & Erecting of

streetlight at wankaner taluka police station Dist- Morbi. (Including electrification)

Statement showing the approximate quantities for the items of the above work to be carried out and

Cost put to Tender for Rs.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(A) CIVIL WORK:

Excavation for foundation upto 1.5 M. depth incluing sorting out and stacking of useful materials and

Rupees One Hundred Twenty One

1 disposing of the excavated stuff of any lead & Lift[A] loose or Soft soil 42.00 Cum

and Paisa Seventy Two Only

Excavation for foundation upto 1.5 M. depth incluing sorting out and stacking of useful materials and Rupees One Hundred Fifty Five

2 disposing of the excavated stuff upto any lead & Lift.(B) Dense or Hard soil 18.00 Cum

and Paisa Seventy Seven Only

Providing & Laying Cement Concrete 1:4:8 (1cement : 4‐coarse sand:8 M/C graded stone aggregates of 40 Rupees Two Thousand Seven

3 mm nominal size) curing complete,excluding cost of formwork in Foundation & Plinth. 16.00 Cum 2742.27 Hundred Fourty Two and Paisa

Twenty Seven Only

Providing TMT Bars Fe‐500/550 reinforcement for RCC work including cutting, bending, binding and

placing in position etc.complete for all floors.(Brand As Approved By GSPHC) Rupees Seventy Six and Paisa

Providing and laying controlled cement concrete M ‐ 250 including finishing smooth with curing etc

complete Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Must Be Of Steel Rupees Four Thousand Six

5 Only So As To Give A Fair Finish but excluding cost of reinforcement Rate also inclusive of providing & 4.00 Cum 4698.75 Hundred Ninety Eight and Paisa

mixing of plasticiser as per approved make in propotion as per mix design for R.C.C. work in Column Seventy Five Only

Providing and laying controlled cement concrete M ‐250 including finishing smooth with curing

complete(Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Must Be Of

Rupees Eight Thousand Nine

Steel Only So As To Give A Fair Finish but excluding cost of reinforcement Rate also inclusive of providing

6 3.00 Cum 8957.76 Hundred Fifty Seven and Paisa

& mixing of plasticiser as per approved make in propotion as per mix design for R.C.C. work in IN

Seventy Six Only

COLUMN having any cross sectional area of Column upto Plinth.

Providing and laying controlled cement concrete M ‐ 250 and finishing smooth with curing etc complete

Including the Cost Of Form Work Of Plywood Only With Fair Finish And Proping Must Be Of Steel Only So

As To Give A Fair Finish but excluding cost of reinforcement and Rate also inclusive of providing & mixing Rupees Seven Thousand Two

7 of plasticizer as per approved make in propotion as per mix design for R.C.C. work in in PLINTH BEAM for

4.00 Cum 7298.13 Hundred Ninety Eight and Paisa

any cross sectional area of beam.

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering. Rupees One Hundred Thirty Five

and Paisa Fifty Six Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

BRICK WORK using common burnt clay building bricks having crushing strength not less than 35 Kg./Sq cm.

In super structure above plinth level upto floor two level. Conventional bricks in cement moratar 1 : 6 ( 1 Rupees Four Thousand Four

9 cement : 6 coarse sand) for Ground FLOOR 10.50 Cum 4451.53 Hundred Fifty One and Paisa Fifty

Providing & laying ordinary cement concerete 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone

aggregate 20 mm nominal size) including finishing smooth with curing etc complete (Including the Cost Of

Form Work Of Plywood Only With Fair Finish And Proping Must Be Of Steel Only So As To Give A Fair Rupees Eight Thousand Nine

10 Finish but excluding cost of reinforcement Rate also inclusive of providing & mixing of plasticiseras per 1.50 Cum 8911.23 Hundred Eleven and Paisa

approved make in propotion as per mix design for R.C.C. work in Beam having any corss section area of Twenty Three Only

BEAM for Ground Floor.

Providing & laying ordinary cement concerete 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone

aggregate 20 mm nominal size) complete Including the Cost Of Form Work Of Plywood Only With Fair

Finish And Proping Must Be Of Steel Only So As To Give A Fair Finish but excluding cost of reinforcement Rupees Eight Thousand Six

11 Rate also inclusive of providing & mixing of plasticiser as per approved make in propotion as per mix 2.50 Cum 8693.76 Hundred Ninety Three and Paisa

Seventy Six Only

design for R.C.C. work in Slab of thickness 10mm to 13mm for Ground Floor.

Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and finished even

& smooth in C.M. 1: 3 ( 1 cement : sand ) including finishing with a floating coat of neat cement slurry at Rupees Two Hundred Ten and

GROUND FLOOR. Paisa Five Only

Providing 15 mm thick cement plaster in single coat on brick or concrete wall for interior plastering and

finished even and smooth in C.M.1:4 (1 cement :4 coarse sand) including finishing with floating coat of Rupees Two Hundred Nine and

neat cement slurry. in GROUND Floor. Paisa Seventy Two Only

Providing 15 mm thick cement plaster in single coat on brick or concrete wall for interior plastering and

finished even and smooth in C.M.1:4 (1 cement :4 coarse sand) including finishing with floating coat of Rupees Two Hundred Thirty Eight

neat cement slurry. in First Floor. and Paisa Nineteen Only

Providing 20mm thick SAND FACED cement plaster on walls above ground level consisting 12mm thick

backing coat of C:M 1:3 (1 cement; 3 sand) and 8mm thick finishing coat of C:M 1:1 (1 cement; 1 sand) etc. Rupees Three Hundred Twelve

15 complete for any height. (Gutka Plaster) 31.00 Smt

and Paisa Fifty Six Only

Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick for jambs and sills of doors &

windows using neat cement slurry laid over 20 mm average base of cement mortar 1:1(1 cement:1 Coarse

Sand) and jointed with grey cement slurry including racking(Tancha Work) rubbing and

Rupees Two Thousand Four

16 polishing,scaffoldings,tools and tackles,scaffolding etc. complete(with base of neat cement) as per 58.90 Smt

Hundred Twenty Eight Only

direction of Engineer in charge including rounding the exposed edges as directed.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing frame, and fixing horizontal extrutded Three Domal Alluminium section window having

extrutded alluminium colour anodized track member size 79.9mm 1.12kg/mt), Vertical member of size

79.9mm x 45mm x 1.2mm ( Section @ Wt. 1.12kg/mt) with sliding shutter of 45mm x 1.2mm (Section

series no: 27 x 65, @ Wt. 27mmx horizontal 1.2mm member ( Section size 65.1 @ Wt. mmx 27mmx

1.2mm ( Section @Wt. 0.655kg/mt) Vertical member of size 65.1mm x 0.655kg/mt) with 5mm thick Rupees Four Thousand Nine

17 powder coated alluminium transparent bronze colour tinted float glass with etc. completed for window 54.90 Smt 4985.25 Hundred Eighty Five and Paisa

fitting and Fixtures and transparent silicon sealent glass fixing to frame as per details Including one Twenty Five Only

mosquitoe jali shutter with both side Locking Arrangment.(Make Jindal)

Providing frame, and fixing Alluminium section window having extrutded alluminium colour anodized

section , Single Shutter Openable Window, Main outer Frame Size 65mmx42mmx1.60mm(of jindal section

no.21039,@Wt. 1.018 Kg/mt),verticle member size 39.40mmx40mmx1.25mm(of jindal section no.

wt. .550 Kg/ mt.), Horizontal member size 39.40mmx40mmx1.25mm (of jindal section no. 5180, wt. .550 Rupees Three Thousand Two

18 Kg/ mt.) with 5mm thick powder coated alluminium transparent bronze colour tinted float glass with etc. 6.58 Smt 3210.79 Hundred Ten and Paisa Seventy

completed for window fitting and Fixtures and transparent silicon sealent glass fixing to frame as per Nine Only

details complete with Locking Arrangment.

Celling painting (two coats) with plastic emulsion paint on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth With Applying two coats of Fine Putty & One coats of primer on new wall surface to give

Rupees One Hundred Ninety One

19 an even shade including thoroughly brushing the surface free from mortar dropping and other foreign 763.40 Smt

and Paisa Seventy Three Only

matter and sand papered smooth. paint, primer and putty shall be as per approved make list of GSPHCL

Wall painting (two coats) with plastic emulsion paint on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth With Applying two coats of Fine Putty One Coat of Primer on new wall surface to give an

even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter Rupees One Hundred Eighty One

and sand papered smooth.paint, primer and putty shall be as per approved make list of GSPHCL and Paisa Fourty Two Only

Wall painting (two coats) with plastic emulsion paint on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth With Applying two coats of Fine Putty One Coat of Primer on new wall surface to give an

even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter Rupees One Hundred Fifty Three

and sand papered smooth.paint, primer and putty shall be as per approved make list of GSPHCL and Paisa Thirty Five Only

Dismentaling Doors, Widows, Ventilators Etc(Wood or Steel)Shutters including chowkhats architraves,

Rupees One Hundred Ninety and

22 holdfast and other attachement etc. complete and stacking them within all lead and lift (I) Not ecxeeeding 46.00 Each

Paisa Nineteen Only

3 sq. mt. in area

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas

Rupees Fifty Four and Paisa Nine

23 and disposal of unserviceable materials with all lead and lift.(ii) A.C. sheet roofing 25.00 Smt

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Painting two coats (excluding priming coat) on previously printed steel and other metal surface with

Rupees Ninety Eight and Paisa

24 synthetic enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and 71.52 Smt

Ninety Three Only

other foreign matter.

Painting two coats (excluding priming coat) on previously painted wood and wood based surface with

Rupees One Hundred Fourteen

25 enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter. 471.84 Smt

and Paisa Twenty Four Only

Steel work, welded in built up sections framed work fabrication & erection including cutting, hoisting,

fixing in position and applying a priming coat of paint. In beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purling connected to

common rafters and the like rate is including with grinding and applying of mild steel putty into groove to

have smooth surface, two coats of oil pint and one coat of yellow zinc chromate primer coat of approved Rupees Nine Thousand Eighteen

26 brand only. Oil paint shall be Luxol enamel paint of Berger paint India limited or Asian paint Apcolite 20.33 Qtl.

and Paisa Thirty Only

premium gloss Enamel of Asian Paint or Dulux Premium gloss Enamel of Dulux Paint and Nerolac synthetic

Enamel of Nerolac Paint for all floor and at any height only.

providing and corrogulated JSW pre coated sheet roofing fixed with galvanised iron J or L hooks, bolts and

Nuts 8 mm dia with bitumin and G.I. Limpet washer or G.I. limpet washer with white lead complete Rupees One Thousand Twenty

27 excluding the cost of Purlines , rafters and trusses(0.60mm thick) 138.00 Smt

Two and Paisa Seventy Five Only

Providing and fixing Pre Cast concrete Kerb stone of grey cement based concrete block 30cm length, 30cm

height and 15cm thick of M250 grade concrete as per approved design and including excavation for fixing Rupees Three Hundred Seventy

in proper line and level,filling the joints with C:M 1:3 (1: Cement,3: Sand) etc comp. as per instructed by One and Paisa Twenty One Only

engineer In charges.

Construction of concrete road using trimix system having of any thickness M‐300 concrete Mix with "C"

channel having size 75mm X 75mm As per required level slope and thickness of concrete road floor

levelling of place concrete with surface vibrator machine, dewatering system device finishing with power

floater machine and trowel light brooming on the surface as directed including curring etc complete. Rate Rupees Four Thousand Six

29 also inclusive of providing & mixing of plasticiser as per approved make in propotion as per mix 28.00 Cum 4628.68 Hundred Twenty Eight and Paisa

Sixty Eight Only

design.Rate also inclusive of providing & mixing of plasticiseras per approved make in propotion as per

Total Amount(Civil-A)=

Total Amount(Civil-A)=

(B) Electrical Work

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing & erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC 9.00 Point 461.00 Rupees Four Hundred Sixty One

insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS wire for earth continuity Only

in FIA approved ISI mark medium class white colour 20/25 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution erected on/in Brick Wall / slab along with continuous

G.I. fish wire to draw wires and laid in approved manner zari for PVC pipe and boxes shall be

filled with cement mortar and finishing the surface to match the wall / ceiling complete with

approved make 5/6 Amp. ISI make modular type switch and accessories mounted in 20 G. G.I.

30A company fabricated metallic box covered with appropriate front plate modules erected flushed

with wall / ceiling with necessary modular lamp holder / modular ceiling rose / HD Connector as

directed for concealed wiring.(Deep Junction box 75mm depth if required)(Make & Model

approved by EIC and matching colour with switch and accessories) Light point. Cat.-II.

Necessary sheet / tape / polythene / sand must be erected or filled in all box to prevent mortar

going into the box. Length of point wiring must not increase than 10 mtr. For that necessary

switch boards and their locations must be finalised before execution by agency otherwise

payment will not be done for extra long point. (For future extention, if required, agency has to

erect one higher size metal box and modular plate as per instruction of EIC. Cost of blank plate

shall be paid as per tender item) [This item include cleaning (inside/outside) of all G.I. switch

boards, electric point box, fan box, MCBDB & box cutting plaster finishing for modular plate

without any gap] (Conductor resistance should be as per IS:8130/1984)

For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step type 1.00 Point 648.00 Rupees Six Hundred Fourty Eight

Electronic fan regulator both having ISI mark) Cat.-II Only

For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-II 1.00 Point 489.00 Rupees Four Hundred Eighty Nine

For Looped on switch board (with 6 Amp.Switch & 3/5 pin socket both having ISI mark) Cat.-II. 4.00 Point 234.00 Rupees Two Hundred Thirty Four

Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) 30.00 Mtr. 24.00 Rupees Twenty Four Only

RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction

31A boxes fixed with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to

draw mains with necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

31B 25 mm. dia. 50.00 Mtr. 33.00 Rupees Thirty Three Only

32A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with FIA 20.00 Mtr. 62.00 Rupees Sixty Two Only

approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution to be erected on/in brick wall / slab along with continuous G. I. fish

wire to draw mains laid in approved manner with plastering by cement mortar & finishing the

surface to match the wall / ceiling complete with FRLS PVC insulated wire for earth continuity.

(Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains

with 1.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour code.

(Conductor resistance should be as per IS:8130/1984)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

32B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper 10.00 Mtr. 146.00 Rupees One Hundred Fourty Six

multi stranded conductor for earthing as per standard colour code. [Wire must be having box Only

packing] (Conductor resistance should be as per IS:8130/1984)

33 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 2.00 Point 712.00 Rupees Seven Hundred Twelve

sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated FRLS Only

wire for earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected in wall/slab along

with continuous G. I. fish wire to draw wires and laid in approved manner zari for PVC pipe &

boxes shall be filled with cement mortar & finishing the surface to match the wall / ceiling

complete with 16 Amp Modular type Swich and accessories mounted in 20 G. GI company

fabricated metallic box covered with appropriate front plate modules erected flushed with wall. (a)

16 Amp. Indicator switch & 1 No. 6/16 A universal socket white colour suitable for 3/5 pin

top duly both having ISI mark. (Necessary sheet / tape / polythene / sand must be erected or

filled in all box To Prevent Mortor Going In To The Box) Cat.-II. (Conductor resistance should

be as per IS:8130/1984)

34 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in 3.00 Each 7025.00 Rupees Seven Thousand Twenty

soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be made Five Only

from Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed

Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size:

70mm X 100mm length, Terminal Should be made from inner pipe for that pipe must be pressed

and gave rectangular shape so its work as a terminal.The hot deep galvanising must be done

after above process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:-

2 no.with washer suitable for 14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time

Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm

depth and Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit

all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with

earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between

neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for one year. Earthing

must be done in the presence of A.E. (GSPHCL)]

35 For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in 3.00 Each 276.00 Rupees Two Hundred Seventy Six

earth pit (certificate for soil have to given by DEE / AE along with photographs) Only

36 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage, 2.00 Each 111.00 Rupees One Hundred Eleven

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, Only

mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with

PC diffuser suitable LAMP holder

37 Providing and erecting Polycarbonate body surface mounting LED Bulk head type 9 watt Lighting 4.00 Each 780.00 Rupees Seven Hundred Eighty

Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen output from Only

luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt

driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working temperature, AL frame with

Beam Angle 120 deg.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

38 Supplying & erecting LED indoor fitting of approximately 4 feet long with LED of wattage 0.2W 3.00 Each 370.00 Rupees Three Hundred Seventy

to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made from Only

Aluminum exttusion having enough strength (Sample must be approved by EIC) With

Polycarbonate diffuser With Following Specification

(1) Company Mark/Name on the Fitting

(2) Rated input voltage and frequency 220V to 2240 VAC,50Hz

(3) Rated input wattage max 24 W

(4) Rated input current ; 0.2 Amp.

(5) Power Factor : Min.0.90

(6) ATHD : Max. 15%

(7) Rated Luminous flux : Min. 2420 lm

(9) CRI : Min/ 80 Ra

(10) Driver Effciency : min. 80%

(11) LED life span : Min. 50000 Hrs @ L70

(12) Over Voltage Protection : Withstand up to 440 V/AC for 4 Hrs.

(13) Surge Protection : Min.2 KV

(14) IP rating : IP

(15) IK rating : IK

(16) Short circuit, Open Circuit & Reverse Polarity must be provided

(17) Fixing clamp design & strength should be sufficient to hold the fitting erected on wall or

(18) 3 core copper wire of appropriate size with earthing connector (Note:-The manufacturer/

authorized Channel partner of the manufacturer has to submit 5 yrs free replacement

Guarantee for complete Fixture) Approval will be given strictly subject to item specification.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

39 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I, 50 1.00 Each 1929.00 Rupees One Thousand Nine

Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Operating Hundred Twenty Nine Only

Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5)

RPM: minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of

heavy duty premium quality Ball bearing: Two, (9) Total Body: Top & Bottom should be

alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder

coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance )as

per is 1709-1984, Aluminium body premium quality, Branded make,(14) Down road: up to 1.0 mtr

as per site requirment, (15) Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per

site requirment, (17) No vibration and noise due to mechanical parts. (Agency has to erect safey

wire with ceiling fan and checked with EIC) (OEM has to approved model as per tender

specification and tested at ERDA) (Necessary test reports should be submitted strictly at the time

of approval. Sample approved by EIC subject to above specification only)

40 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the RCC bars up to 50 mm 1.00 Each 125.00 Rupees One Hundred Twenty Five

Length each side & piereced through 18 Gauge G.I Box having 125 mm dia depth of 75 mm Only

complete erected concealed in ceiling with necessary modular plate / sheet.

41 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE installation to be 1.00 Each 69.00 Rupees Sixty Nine Only

erected as per I.S.

42 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load (C curve) having 1.00 Each 297.00 Rupees Two Hundred Ninety

10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having following capacity. For Seven Only

43 Providing and Erecting Approved make ISI mark ELCB confirming to IS:12640/1988 having serial 1.00 Each 1950.00 Rupees One Thousand Nine

number printed on it and having sensitivity of 30 mA and breaking capacity of 10 KA and suitable Hundred Fifty Only

for 240 V, 50 Hz having characteristic of quick acting & Tripping with all advance feature & do not

incorporate any electronic component (mounted in MCBDB) Suitable for operation on single

phase 240 Volt max rating of (i) For 25 Amp. DP.

44 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load (C curve) 1.00 Each 327.00 Rupees Three Hundred Twenty

having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having following Seven Only

capacity. For 40 Amp.

45 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA 1.00 Each 730.00 Rupees Seven Hundred Thirty

breaking capacity & confirms to IS :8828 in existing box having following capacity [c] 63 Amp. Only

46 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA 3.00 Each 662.00 Rupees Six Hundred Sixty Two

breaking capacity & confirms to IS :8828 in existing box having following capacity [c] 40 Amp. Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

47 Providing and erecting Two way Centre off Four pole MCB Change Over Switch (IS 13947-3 / 2.00 Each 1331.00 Rupees One Thousand Three

IEC 60947-3) in existing box. (b) for 40 Amp Hundred Thirty One Only

48A Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly 3.00 Each 272.00 Rupees Two Hundred Seventy

powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals for Two Only

following type of RCCB, RCCB + MCB with necessary numbering / marking with oil Paint by

painter. [a] For 2 pole [ Same company metal box used as MCB / ELCB used with earthing

terminal with necessary Numbering/ marking with oil paint by painter]

48B For 4 pole [ Same company metal box used as MCB / ELCB used with earthing terminal with 6.00 Each 442.00 Rupees Four Hundred Fourty Two

necessary Numbering/ marking with oil paint by painter] Only

49 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on existing 25 x 1.50 Sq. Mtr. 2289.00 Rupees Two Thousand Two

25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP SWITCH and energy meter Hundred Eighty Nine Only

(contractor shall make approved drawing of Bakelite sheet To arrange required No. of Energy

meter & ICDP/MCB switch-busbar etc. as per Actual space available in electrical room at site)

50 Providing, erecting, Fabricating the M.S. structure as per requirement of site as per structure 25.00 Kg. 75.10 Rupees Seventy Five and Paisa

design Including proper size approved by EIC of M.S. angles, flats, bars, square pipe, channels, Ten Only

sections (Tata, Jindal, Asian, JSI Make) complete with cutting, welding, grinding and finishing duly

painted with Asian/Nerolac make premium quality oil paint and true care red oxide metal

primer,asian paint make with erection on site as per direction of engineer in charge with

necessary grouting cementing, plastering and finishing complete. All hole opening of square pipe

end must be closed with M.S plate welding. Payment will be done on KG as per Actual weight.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

51 Supplying and erecting Fabricating terminal box for street light pole made from 16 SWG M.S. 6.00 Each 702.00 Rupees Seven Hundred Two

sheet having following size complete with fixing arrangement for terminal board, with necessary Only

hole for wire entry and exit from the box. The box shall be provided with cover and hinges on one

side and bolting at other end The box shall be fixed by clamps fabricated from 25mm x 6mm

flat.The box shall be painted with one coat of red oxide and two coats of paint having following

box size 330 mm x 260 mm x 140 mm (depth). Providing and fixing Terminal board of size 5.0 x

127 x 152.4 mm.bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit with suitable brass

studs with nuts, washers and clamps of size 25 mm x 3 mm suitable for pole painted with one

coat of red lead paint.

52 Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole 34.00 Each 6917.00 Rupees Six Thousand Nine

should be made as per IS. and shall be coated with hot dip galvanizing as per IS:2629/2633/4759, Hundred Seventeen Only

suitable suspend local wind speed with integral Junction box with Hot Deep Galvanised door

having 2 nos. 180° operated hinges & 2 nos. Ln key locking with silicon rubber gasket. Consist of

terminal plate of min 6mm Hylam sheet, standard profile 35 mm X 7.5 mm Din-Rail & MCB, Brass

stud type terminal and arrangement for cable termination to be erected on RCC foundation as

per details given by manufacturer and EIC considering site requirement.

Foundation Details: (1) Grade of RCC 1:2:4, (2) Grade of steel rainforcement of RCC FE

(3) Clear cover to rainforcement 50mm, (4) Concrete vibrated, (5) use suttering / farma, (6) Hot

deep galvanized average 70 Micron, (7) Detail drawing will be given by corporation 5 Mtr. Long

mm Top X 130 mm bottom dia, 3 mm thickness with 200 mm X 200 mm X 12 mm base plate, 4-

M16 Bolts and 600 mm long hot deep galvanized J-Bolt, nuts, washers with 800 mm under

ground and 200 mm above ground level and Foundation in 1:2:4 proportion as per details given

by manufacturer and EIC considering site requirement. Approx Pole weight 46 kg.(Make:- Bajaj,

Valmont, Transrail, Ambica Only) (Test certificate to be submitted)

53 Supplying & erecting Coil type earthing, coil made from 8 SWG galvanised iron wire with 50 mm 34.00 Each 369.00 Rupees Three Hundred Sixty Nine

OD and 50 turns (length of turns approx. 200 mm) and having additional continuous streight Only

length of 3.00 mtr at open end and should be connected to earthing bolt and burried in 1.5 mtr

deep specially prepared earth pit complete with salt and charcoal/coke as required for coil type

earthing. (Approx weight of coil 1.0 to 1.1 Kgs)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

54A Supplying and erecting street light pole bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm 34.00 Each 487.00 Rupees Four Hundred Eighty

outside diameter complete with suitable B class G.I. Sleeve tubing of 2 mm. thick and required Seven Only

size and approx. 45 Cms length suitable for 76.5 / 80 mm. required size of pole top having nuts

and bolts for fixing the brackets and having spread of Upto 0.70 mtr. length with 110 deg. with

vertical plane and suitable welded stiffner reducer and nipple with check nut complete painted

with one coat of red oxide and two coats of alluminium paint.(Zinc Coating before alluminium

Paint is mandatory) (a) For single arm bracket.(Jindal / Asian / Tata / Surya Prakash make

Only) (Fabricators:- Ambica / Fab / Bajaj / Impression equipment Only) (Test certificate to be

54B For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj, 6.00 Each 616.00 Rupees Six Hundred Sixteen

Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted) Only

55 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light Luminaire with 38.00 Each 3512.00 Rupees Three Thousand Five

total consumption of Max. 45 W with single piece die cast aluminium housing, high power LED Hundred Twelve Only

shall be mounted on high quality metal core PCB with extremely precison designed heat sink

complete with IP66 protection Class with polycarbonate / thoughened glass cover the fixture

should be suitable for pole/bracket mounting. The fixture to comply both LM79 and LM

guidelines with LED module min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs, provided

with high quality polycarbonate lenses for better light distribution. The watt capacity of each LED

must be ≥ 4 watt in streetlight fitting The Fixture Should be able to be Pole Mounted and also

bracket mounted, provided with high quality driver for protection against high and low Voltage cut

Off, opertional for high amibient and high humid envirnoments, THD of driver should be less than

Also the Fixture should meet the following technical criterias Oprating range Voltage 160 to 270 V,

system efficiency >= 110 lm/w, and total lumens not less then 4950, CCT > 5000K, CRI >

beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non integralThe

Separate Potted driver should have over current, over voltage protection, short circuit protection

so that the fixture recovers once the fault is removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH.

(Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit 5 yrs

free replcement Guarantee for complete Fixture)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

56 SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of 8.00 Each 6117.00 Rupees Six Thousand One

Max. 90 W with single piece die cast aluminium housing, high power LED shall be mounted on Hundred Seventeen Only

high quality metal core PCB with extremely precison designed heat sink complete with IP66

protection Class with polycarbonate / thoughened glass cover the fixture should be suitable for

pole/bracket mounting. The fixture to comply both LM79 and LM 80 guidelines with LED module

min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution. The watt capacity of each LED must be ≥ 4 watt

in streetlight fitting The Fixture Should be able to be Pole Mounted and also bracket mounted,

provided with high quality driver for protection against high and low Voltage cut Off, opertional for

high amibient and high humid envirnoments,

THD of driver should be less than 10% and P.F > 0.95. Also the Fixture should meet the following

technical criterias Oprating range Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total

lumens not less then 9900, CCT > 5000K, CRI > 65, beam angle 120 deg, 4kV integral & non

integral surge immunity level at least 10 KV non integral..The Separate Potted driver should have

over current, over voltage protection, short circuit protection so that the fixture recovers once the

fault is removed. In addition to the above product should be operational in the temperature range

of 0 deg to 50 deg and humidity range of 10% to 90% RH. (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 5 yrs free replcement Guarantee for complete

58 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked 260.00 Mtr. 46.00 Rupees Fourty Six Only

copper wires of following size to be erected as directed. 3 core 1.5 sq.mm. PVC insulated

round copper wire ISI mark.

59 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for 1100 volt to 1150.00 Mtr. 361.00 Rupees Three Hundred Sixty One

be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage 1.0 mm thick Only

cable clamp or in existing DWC pipe underground or road crossing or floor of following size of

cables. [B] For 4 core x 4 sq.mm.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

60 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 900.00 Mtr. 117.00 Rupees One Hundred Seventeen

(part 24) 2018)) with minimum load required of 450N capacity with anti rodent and ultra violet Only

material properties with necessary connecting accessories of same material at required depth

to be laid 90 cms. under ground for laying of cable below ground / road surface for enclosing

cable and back filling the same to make ground as per original. (A) For Outer dia. 50 mm and

Inner dia. 38 mm. ) (Test Certificate to be Submitted)

61 Providing & fixing double compressed heavy duty flange type brass cable gland with rubber ring 16.00 Each 43.00 Rupees Fourty Three Only

for P V C insulated armoured cable complete with outgoing tails, insulating tape etc. For following

size cables. For 2 to 4 core x 2.5/4.0 Sq. mm (Sigma, MCI, Comet Make Only)

62 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable of 610.00 Each 8.00 Rupees Eight Only

following size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to 6 Sq.mm(For streetlight

63A Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed 50.00 Mtr. 91.00 Rupees Ninety One Only

copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper lugs, nuts and bolts if required. [f] One wire

10.00 sq. mm [For Panel Interconnection]

63B One wire 16.00 sq. mm 25.00 Mtr. 141.00 Rupees One Hundred Fourty One

64 Providing following type of Modular Type Accessories mounted with 20 G company fabricated 3.00 Each 16.00 Rupees Sixteen Only

metalic box, single mounting base frame covered with textured / metallic front plate, modules

erected with necessary connection. As desired by Engineer in charge. Blank Plate Single Cat-II.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

65 Providing, erecting, testing and commissioning insu intelligent street light controller specially 1.00 Each 29366.00 Rupees Twenty Nine Thousand

designed for energy saving in conventional street light system (Cat. No. SLC-03-15 KW HMO) Three Hundred Sixty Six Only

having technical specification, 3 phase 4 wire, 230 V AC/ph, +/- 25% R Y B N 4 wire supply

system, 50 Hz (+/- 10%) 3 W (Stand BY) to 5 W (on full load) consumption, Advance 8 bit micro

controller, switching on longitude and latitude base, accuracy of +/- 1 minute per month, with in

built battery, with battery life of more than 8 years, with special device which hold the parameter

for more than 10 years without any power and password protected.

16 characters and two line LCD display with backlight, 4 keys user friendly keyboard system,

25000 VA feeder pillar capacity, 63/100 Amps isolator, 3 output MCB each of 40 Amp., Input

isolator ELCB 63 Amp. 100 mA. 4 pole, with FR cable provision to by pass by way of relay

operation through auto/manual switch, 2 to 55 centigrade and humidity 90 % non condensing, Out

door type installation on pole with clamps (Provided with clamps and nut bolt) or wall or floor,

Three locking system flush type internal panel lock, external pad lock and internal U clamp locking

systems for against theft of Panel, having 30 Kg weight, 16/18 Gauge MS weather proof box with

industrial exterior powder coated with 7 tank process RAL

66 Providing, erecting, testing and commissioning insu intelligent street light controller specially 2.00 Each 20255.00 Rupees Twenty Thousand Two

designed for energy saving in conventional street light system (Cat. No. SLC-03-1 ph-15 KVA-20 Hundred Fifty Five Only

Amp. per phase) having technical specification, 1 phase, 2 wire, 230 V AC/ph, +/- 25% R Y B N

wire supply system, 50 Hz (+/- 10%) 2 W (Stand BY) to 4 W (at street light operation)

consumption, Advance 8 bit micro controller, switching on longitude and latitude base, accuracy

of +/- 1 minute per month, with in built battery, with battery life of more than 8 years, with special

device which hold the parameter for more than 10 year without any power and password

protected. 16 characters and two line LCD display with backlight, 4 keys user friendly keyboard

system, 7500/15000 VA feeder pillar capacity, 63/100 Amps isolator, 3 output with termination,

40/63 Amps 2/3 pole contactor, 3 X 16 Amp., with FR cable provision to by pass by way of relay

operation through auto/manual switch, 2 to 55 centigrade and humidity 90 % non condensing, Out

door type installation on pole with clamps (Provided with clamps and nut bolt) or wall or floor,

Three locking system flush type internal panel lock, external pad lock and internal U clamp locking

systems for against theft of Panel, having 25 Kg weight, 16 Gauge MS weather proof box with

industrial exterior powder coated with 7 tank process RAL 7035.Electrical wiring and control panel

for high mast systems motor with up and down facility with upper and lower limit input. (High and

low limit switch and motorized systems is to be provided with high mast and cable terminated to

terminal strip.)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

67 Providing and erecting open well type horizontal submersible mono block pump set with cast iron 2.00 Each 15552.00 Rupees Fifteen Thousand Five

body having following specification [E] For 3 phase open well horizontal mono block pump set Hundred Fifty Two Only

suitable for To 85 to 270 LPM discharge at required head as per plumbing length and vertical &

Horizontal head. Agency has to submit the details calculation of head to GSPHCL and get

approval of make and model of pump having tender specification with TDS & GA drawing.

Suitable for 65 mm dia delivery pipe with 10 mtr. necessary Size 3 Core Flat copper flexible

cable. (Body: Cast iron / Winding : Copper / stator : Copper / rotor : Copper / shaft : SS / Carbon

material test certificate from manufacture shall be submitted).The model of the pump with respect

to head and discharge will be approved by EIC.Pump should have following specifications:

(1) Minimum 10 mtr. Cu. flat cable of suitable size must be provided with pump.

(2) Pump shall be installed as per manufacturer foundation/erection drawing or as per IS

(Body full C.I., stator winding- copper, rotor- copper, shaft- SS / carbon material, motor-Energy

efficiency)- copper, rotor- copper, shaft- SS 304, motor-Energy efficiency)

68 Lowering of existing submercible motor pump set complete with required No. and size of 2.00 Each 848.00 Rupees Eight Hundred Fourty

pipes by means of proper chain pulley block and pipe wrenches. Job includes stacking of pipes Eight Only

cronologically after the checking of threads. [d] For open well horizontal submercible pump set for

sump well. (ii) 3 HP

69 Supplying & erecting ISI Marked (Embossed) following size of “B” Class G.I . Pipe & erecting as 20.00 Mtr. 342.00 Rupees Three Hundred Fourty

directed by Engineer-in-charge with necessary plumbing as desired. [e] 65 mm dia. Two Only

70 Supplying and erecting ISI maked C.I. Sluice valve at position with necessary material like flange, 1.00 Each 1543.00 Rupees One Thousand Five

packing, nuts, washers etc. for following size of pipe diameter. 65 mm dia. Hundred Fourty Three Only

71 Supplying and erecting C.I. Swing check type non-return (reflux) valve ISI marked with packing, 2.00 Each 1475.00 Rupees One Thousand Four

flange, nuts and bolts etc.suitable for following pipe size. For 65 mm dia. Hundred Seventy Five Only

72 Supplying & erecting approved make motor control cubical panel (Direct - on - line) made from 2.00 Each 7646.00 Rupees Seven Thousand Six

16 G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors and locking, Hundred Fourty Six Only

arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R- Y - B phases, overload relay, Automatic water level

controller, Ammeter, Voltmeter each with two way selector switch incoming, wires duly socket

crimped, main contactor & overload relay, start - stop push buttons, to be erected on angle iron

frame grouted on wall as directed. The isolator, overload relay & contactors will be of L & T,

Siemens or BCH make only. (A) DOL up to 5.0 H.P.

73 Supplying and erecting Water tight M.S.Box of size 20 x 15 x 15 cms. to erect suitable kitkat 1.00 Each 232.00 Rupees Two Hundred Thirty Two

fuse / MCB to be . erected on polished wooden board inside the box with hinged/sliding door with Only

rubber rings and erected on pole with suitable pole clamp, all duly painted with one coat of red

oxide and two coats of paints. (Cost of Fuse / MCB shall be taken extra) [Provision for motors

cable joints near sump]

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

74 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible 40.00 mtr 145.00 Rupees One Hundred Fourty Five

copper cable approved make of following Size. [c] 3 Core x 4 Sq. mm Only

75 Providing & fixing water proof straight joint in PVC insulated flat flexible copper cable by using 2.00 Each 188.00 Rupees One Hundred Eighty Eight

insulated material water proofing material and making the joint complete. UP to 10 Sq.mm. Only

76 Supplying and fixing radium sticker or Painting the number and words for inventory 100.00 Each 2.00 Rupees Two Only

Identification on erected fittings / equipment’s or Such accessories (MCBDB, Panel, Pole, Rack,

Earthing, Pump, Door etc.) as may required with good quality of enamelled paint or fade proof,

weather proof, waterproof high quality vinyl radium sticker for indoor / outdoor application as

directed by engineer in charge. For one character 50 mm height.

(The colour of sticker / paint should be as per instruction given by EIC as per site requirement)

77 Dismantling the existing pole up to 6 m height with brackets, clamps, insulators, stay from the 34.00 Each 183.00 Rupees One Hundred Eighty

cement concrete foundation and making the site clear by refilling the pits with excavated materials Three Only

and bringing it to the ground level.

Total Amount(Electrical-B)=

Total Amount(Electrical-B)=

Total Amount(A+B)=

Total Amount(A+B)=

Contractor sign I/C Executive Engineer