Repair/Maintenance of geysers, ceiling fans, exhaust fans and wall mounted fans in Upper Garrison under AGE E/M OF GE (KH) YOL CANTT

Amount

Taking down ceiling fan of any sweep, any size/make from existing position of any height by disconnecting electrical connections and transporting to workshop. Inspection of ceiling fan in presence of Engr-in-charge/JE (or rep of department) after dismentling spares parts. Transporting ceiling fan back from work shop to site including hanging/ fixing and connecting up and testing etc complete all as required at site and directed by Engr - in - Charge.

M&L for complete repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep at work shop, incl dismantling complete the ceiling fan parts i.e. blades, fan rod, canopy, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, blade and greasing/oiling etc assembling, cleaning and testing of ceiling fan as directed. Note:- (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Writing of MES Nos and painting of ceiling fan shall be measured & paid separately uner relevant item of Sch 'A'. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engr-in-Charge & contractor. (v) Cost of minor part i.e. Cotterr pin, PVC connector, screws shall deemed to be included in the quoted rate.

Removing of old burnt winding wiring any type, cleaning stator complete for burnt wiring, carbon residue and rewinding of stator winding of any type/any make fan/ any stator design ceiling fan of 1200mm sweep with superior quality super enameled winding copper wire of existing specification, gauge and weight with superior quality insulation for satisfactory functioning fan in presence of JE incharge complete all as directed by Engr-in-Charge

Supply only ball bearing of existing number suitable for ceiling fan 1200/ 1400mm sweep of approved makes including necessary greasing complete all as specified and directed. Make : NBC/ SKF/FAG

Supply only gun metal bush of existing size suitable for 1200/ 1400mm sweep ceiling fan complete all as specified and directed.

Supply only capacitor 2.5 MFD including necessary connection, complete all as specified and directed. MAKE- USHA/Havells/Epcos/BAJAJ

Supply only down rod 15mm bore, 300mm long fixed one end with mild steel U clamp, nut, lockable bolt, rubber reel, lock pin and other end having threaded/ drilled hole end, suitable nut, bolt, split pin and check nut or aluminium clamp duly white painted suitable for all size and makes of ceiling fan complete all as specified and directed.

All as per Srl Item No. 7 here-in-before but 450mm long

Supply only blade of 1200mm sweep of ceiling fan complete all as specified and directed.

Supply and fixed in repair stepped type electronic fan regulator flush type, complete all as specified and directed.

M&L for painting one coat of synthetic enamel paint (white) using spray machine painting on the surface of ceiling fan of 1200/ 1400mm sweep (including blade) complete after preparation of surface i.e cleaning, washing of surfaces filling cavities with filler, cleaning dust and writing MES No. complete, all as specified and directed by Engr-in-Charge

Supply only U clamp/ brass bracket assy with rubber reel with nuts, bolt 10mm dia, lock/ split pin, washer suitable for ceiling fan clamp complete all as specified and directed.

Supply only top and bottom canopy of plastic with steel screw suitable for rod for fan of 1200/ 1400mm sweep complete all as specified and directed.

Taking down carefully exhaust fan of any sweep, any size/make from existing position of any height by disconnecting electric connections and transporting to workshop. Inspection of ceiling fan in presence of Engr-in-charge/JE (or rep of department) after dismentling spares parts. Transporting exhaust fan back from work shop to site including hanging/ fixing and connecting up etc complete all as required at site and directed by Engr - in - Charge.

M&L for complete Repair and maintenance of unserviceable exhaust fan of any sweep at work shop, including dismantling complete the parts i.e. blades, fan cover, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, connecting wire, PVC connector and greasing/oiling etc assembling, cleaning and testing of exhaust fan as directed. Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Painting of ceiling fan shall be measured & paid separately uner relevant item of Sch 'A'. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engr-in-Charge & contractor. (v) Cost of minor part i.e. Cotterr pin, PVC connector, screws shall deemed to be included in the quoted rate.

M&L for rewinding stator of exhaust fan 450mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material complete all as specified and directed

M&L for rewinding stator of exhaust fan 300mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material complete all as specified and directed

M&L for rewinding stator of exhaust fan 250/200mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material complete all as specified and directed

Supply and fixing of motor of plastic body exhaust fan of 200/250mm sweep as per existing sample, complete all as specified and directed by Engr-in-Charge.

Supply only ball bearing of exhaust fan suitable for 200 to 450mm sweep as per existing ball bearing including necessary greasing complete all as specified and directed. Make:-NBC/SKF/FAG/Norma

Supply only mounting legs with rubber suitable for any type of exhaust fan complete all as specified and directed

Supply only of steel blade suitable for exhuast fan upto 300mm sweep complete all as specified.

Supply only of plastic blade complete set suitable for exhuast fan upto 300mm sweep complete all as specified.

Supply only of plastic body, suitable for exhaust fan of size 300 mm sweep and making necessary connection complete all as spd and directed by Engr - in - Charge.

Supply & fix exhaust fan louvers suitable upto 300mm sweep exhuast fan complete with necessary nut, bolt iron work complete.

Supply & fix XPM Jaali at wall opening for exhaust fan of size 300mm/380mm /450mm sweep of suitable size as directed by Engr-in-Charge.

Supply only capacitor 1/1.8 MFD 50 Hz suitable for Exhaust fan. MAKE- USHA/Havells/Epcos/BAJAJ

M&L for painting one coat of synthetic enamel paint (black) using spray machine painting on the surface of exhaust fan of size upto 450mm sweep (including louvers and other parts of exhaust fan) complete after preparation of surface i.e cleaning, washing of surfaces filling cavities with filler, cleaning dust and dirt all as specified and directed by Engr-in-Charge.

Supply only PVC insulated copper (Flexible) conductor PVC sheathed three core 0.50 sqmm for making connections between ceiling rose and winding, complete all as specified.

Taking down water storage heater (Geyser) of 25/35/50 liters capacity from electric socket and disconnecting from PVC connection, water supply and screw down kept aside for reuse at same / different location after cleaning of geyser tank, refixing the same duly grouting nuts, bolts washers and connecting to existing water connection complete, all as specified and as directed by Engineer-in-Charge. complete all as specified. Note :- Unserviceable part shall be measured and replaced separately under respective items.

Supply and replacement of heating elements 2KW 230V ISI marked round base suitable for water heater of any type including connection with suitable cable complete, all as specified and directed by Engineer-in-Charge. Make:-Theeta/Racold/Airex

Supply and replacement of heating elements 2KW 230V ISI marked triangular base suitable for water heater of any type including connection with suitable cable complete, all as specified and directed by Engineer-in-Charge. Make:-Theeta/Racold/Airex

Supply and replacement of heating elements 1.5KW 230V ISI marked triangular base suitable for water heater of any type including connection with suitable cable complete, all as specified and directed by Engineer-in-Charge. Make:-Theeta/Racold/Airex

Supply and replacement of heating elements 3KW 230V ISI marked suitable for instant water heater of any type including connection with suitable cable complete, all as specified and directed by Engineer-in-Charge. Make:-Theeta/Racold/Airex

S&F in repair heating element (as per sample exist in ground of make recold/venus geyser) inbulid with round base and having 6 hole for fixing and provision of thermostat of 25 ltrs capacity geyser including necessary studs, screws and rubber gasket/washers, complete all as specified and directed.

S&F in repair for thermostat switch of geyser 230V, (adjustable range bewteen 0 degree to 90 degree centigrade temp range), ISI marked as per existing thermostat suitable for hot water storage heater 25/ 35 / 50 Ltr, complete all as specified and as directed.

S&F in repair for capillary thermostat switch (as per sample exist in ground of make recold/venus geyser) of geyser 230V, (adjustable range bewteen 0 degree to 90 degree centigrade temp range), ISI marked as per existing thermostat suitable for hot water storage heater 25/ 35 / 50 Ltr, complete all as specified and as directed.

S&F in repair for defective steel inner tank of 25 Litres capacity geyser tank made out of steel sheet 2 mm thick suitable for 6 hole assembly complete, all as specified and as directed by Engineer-in-Charge.

S&F in repair for defective steel inner tank of 25 Litres capacity geyser tank made out of steel sheet 2 mm thick suitable for 9 hole assembly complete, all as specified and as directed by Engineer-in-Charge.

S&F in repair defective steel inner tank of 35 Litres capacity geyser tank made out of steel sheet 2 mm thick suitable for 6 hole assembly complete, all as specified and as directed by Engineer-in-Charge.

S&F in repair defective steel inner tank of 35 Litres capacity geyser tank made out of steel sheet 2 mm thick suitable for 9 hole assembly complete, all as specified and as directed by Engineer-in-Charge.

S&F in repair best quality PVC pipe hot and cold water for geyser with adopter both end of size 10mm dia and 600mm length (ISI marked) suitable for geyser, complete all as specified and as directed.

S&F in repair Air release valve 15mm dia, ISI marked for geyser of cap 25/ 35/ 50 Ltr all as specified and directed.

S&F in repair non return valve 15 mm dia, ISI marked for geyser of cap 25/ 35/ 50 Ltr all as specified and directed.

S&F in repair fusiable plug of brass 15mm bore, ISI marked for geyser of cap 25/35/50 Ltr all as specified and directed.

S&F in repair for indicating lamp (green or red), 230V, flush type, suitable for water heater including taking down old unserviceable, all as specified and as directed

S&F in repair siphon assembly made out of brass of 25 /35 ltrs (9 hole) capacity geyser including necessary studs, screws and rubber gasket/washers, complete all as specified and directed.

S&F in repair siphon assembly made out of brass of 25 /35 ltrs (6 hole) capacity geyser including necessary studs, screws and rubber gasket/washers, complete all as specified and directed.

Replacement of insulation material (Glass Wool, 25mm thick) for geysers 25-50 ltrs capacity.

Repair to geysers inner water tank of 25 to 50 ltrs capacity in gas welding / brazing for water tightness, complete all as specified and directed by Engr - in - Charge.

Supply & Fix PVC cable 3 core 1.5 Sqmm flexible stranded all as specified and directed.

Replacement of old unserviceable anchor bolt 12mm x 100mm long complete all as specifed and directed (Note:- Anchor bolt shall be grouted with hammer drill only).

M&L for painting of outer body of geyser with two coats of synthetic enamel paint (white colour) by using spray gun and complete all as specified and directed by Engr - in - Charge.

Taking down wall mounted fan of any sweep, any size/make from existing position of any height by disconnecting elect connections and transporting to workshop. Inspection of ceiling fan in presence of JE/ Engr-In-Charge (or rep of department) after dismentling spares parts. Transporting exhaust fan back from work shop to store yard including hanging/ fixing and connecting up and testing etc complete all as required at site and directed by Engr - in - Charge.

M&L for complete Repair and maintenance of unserviceable wall mounted fan of any sweep at work shop, incl dismantling complete the parts i.e. blades, fan cover, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, connecting wire, PVC connector and greasing/oiling etc assembling, cleaning and testing of exhaust fan as directed. Note:- (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Painting of wall mounted fan shall be measured & paid separately uner relevant item of Sch 'A'. (iv) A register will be maintained by the contractor for record of repair duly signed by JE and Engr-in-Charge & contractor. (v) Cost of minor part i.e. Cotterr pin, PVC connector, screws shall be deemed to included in the cost of quoted rate.

M&L for rewinding stator of wall mounted fan 300mm sweep with super enameled copper winding wire of existing specification, gauge and weight including insulating material, complete all as specified and directed.

Supply only ball bearing of wall mounted fan suitable for 300mm sweep as per existing ball bearing including necessary greasing complete all as specified and directed. Make : NBC/ SKF/ Norma/ FAG

Supply and fix capacitor of wall mounted fan as per exisiting make and model.

Supply and Fixing in repair the sheet metal enclosure with socket plugtop with MCB of a two pin and earth plug and a socket complete with one double pole MCB of 20 Amps rated and all as specified and directed.

Supply and fix Plug top 3 Pin type of rating 6 Amp, 230 volts.

Supply and fix Plug top 3 Pin type of rating 16 Amp, 230 volts.

Supply and fix in replacement of plastic blade complete set suitable for wall mounted fan upto 300mm sweep complete all as specified.

Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) on fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, all as specified.

Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over 2mm thick wall care putty complete, all as specified.

Preparation of newly plastered wall surfaces and appling two coats of cement base pain over one coat of white wash, complete, all as specified.

M&L for GI tubing heavy grade 40mm dia pipe by making holes in wall, fixing of pipe and making disturbed surfaces good as existing for hanging of ceiling fan including all type of necessary attachements like angle iron, flat iron, nuts and bolts etc. required for hanging of ceiling fan all as required at site and as directed by Enge-In-Charge. Note:- (i) The length of the GI pipe shall be as per exisiting (room) length exc 3m but n.exc 4m. (ii) Taking down ceiling fan cleaning and refixing same and making electric connection with fan after fixing of pipe include in quoted rates.

M&L for fixing of ceiling fan with the help of anchor hook in ceiling including fan hanging junction box and making electric connection with fan complete all as specified and as directed by Enge-In-Charge. Note:- Only fixing of old ceiling fan considered in item.

M&L for fixing of exhaust fan by making hole in stone/brick wall, fixing the exhaust fan with suitable arrangement, finishing the disturbed wall surface and connecting electrically complete all as required at site and as directed by Enge-In-Charge. Note:- Only fixing of old exhaust fan considered in item.

M&L for fixing of exhaust fan in existing opening with the help of ply board having thickness 10mm and making electrical connection, complete all as required at site and as directed by Enge-In-Charge. Note:- Only fixing of old exhaust fan considered in item.

ess are electricals and electronic

Dhani Builders

M/S MALHI CONSTRUCTIONS

Durga Electricals