Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.8 LAccepted-AOC GANABARAN GHAZIPUR SULTANPUR KAINALTORASK DINK RD | GHAZIPUR | UTTAR PRADESH | 232325 | ₹13.8 L | L1 | Accepted-AOC AOC Completed |
| 2 | L2₹16.9 L+₹3.1 L (22.8%)Rejected-Finance 357 339 OM NAGAR ALAMBRAGE LUCKNOW | ₹16.9 L+₹3.1 L (22.8%) | L2 | Rejected-Finance As Per Highest Rate |
| 3 | L3₹19.7 L+₹5.9 L (43.0%)Rejected-Finance N A | FARIDABAD | HARYANA | 121004 | ₹19.7 L+₹5.9 L (43.0%) | L3 | Rejected-Finance As Per Highest Rate |
Tender Value
Refer Docs
EMD Value
₹2.5 L
Closing Date
5 Mar 2026, 12:00 pmClosed
Executive Engineer
EE CD-3 PWD Lakhimpur Kheri
Road Safety work on Motipur Tikoniya Kodiyalaghat Khairatiya Bandha road (ODR) Km-1 to 11(400).
2026_CEUCZ_1120236_1
251/e-tender/2026 Dated 17-02-2026
Open Tender
Civil Works - Roads
Fixed-rate
60 days
Lakhimpur Kheri
Please refer Tender documents.
2 documents required · 2 mandatory
₹944
₹2.5 L
Yes
EE CD-3 PWD Lakhimpur Kheri
22 May 2026
26 Feb 2026
5 Mar 2026
26 Feb 2026
5 Mar 2026
26 Feb 2026
28 Feb 2026
Select, At Par, Excess (+), Less (-) IOCL
Tender Inviting Authority: Executive Engineer, Construction Division-3, P.W.D., Lakhimpur-Kheri
Name of Work: Road Safety Work on Motipur - Tikoniya- kaudiyalaghat-khairatiha Bandha Marg (ODR) km 1 to 11(400)
Contract No: 251/e-Procurement notice/2026 Date 17.02.2026
Item Description Item Code / Make Quantity Units Estimated Rate UNIT Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category
1 P/L of hot applied thermo plastic compound 2.5 mm thick including reflecto rising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass breads as per IRC 35.The finished surface to be level uniform & free from streaks and holes As per MORTH-803(8.13) Sqm Excess(+) Full Conversion INR
2 Thermoplastic marking of 300 mm side and 5 mm height at 600 mm apart (One set is of 6 strips) 5 mm height is achieved through six applications thermoplastic, aplied at an interval not less than one hours after the previous layer gets solidaified. Alternatively, made of Mastic Asphalt or any equivalent material which would provide 5 mm height. Sqm Excess(+) Full Conversion INR
3 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (50x60 cm Single Chevron) No Excess(+) Full Conversion INR
4 Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. As per MORTH -801(8.4) (90 cm equilateral trangle with diffintion plate). No Excess(+) Full Conversion INR
5 Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. As per MORTH -801(8.4) (Identification board More than 0.90 sqm size). No Excess(+) Full Conversion INR
6 6 m. span overhead Cantilever structure with 300 dia MS - one vertical post Supply, fixing & eraction of built up Overhead Structure of 6 m span comprising of two vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 0.90x0.90 x1.50 of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances andcomplete & Installation work shall be as per relevant clauses of MORT&H etc Complete of all work No Excess(+) Full Conversion INR
7 Providing & fixing of reflective signs with a corrosion resistant 4 mm thick aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2010 retro reflective sheeting with MS angle frame of 35x3 Sqm Excess(+) Full Conversion INR
8 Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared surface cleaned with hydraulic broom but including cost of bitumen. Sqm Excess(+) Full Conversion INR
9 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades but including cost of bitumen. Sqm Excess(+) Full Conversion INR
10 Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade. Type-B but including cost of bitumen. Sqm Excess(+) Full Conversion INR
11 Supply ,fixing ,Painting & Lettering of 5th Kilometre, kilometer & Hectometre stone etc.completion of work. Km Excess(+) Full Conversion INR
Total in Figures
Quoted Rate in Figures Select
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
Tendernotice_2.pdf
PDF • 1.18 MB
BOQ_2083681.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .