REPAIRS TO FENCING HARDSTANDING SHUTTERS AND CERTAIN MISC BR AND EM WORKS OF INSTALLATION UNDER GE KARGIL

Amount

Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed

Demolition of precast concrete articles and precast concrete block walling including all quoins, arches, pillars, etc built in cement mortar of any description not other specifically provided for etc complete all as specified and directed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed

Dismantling posts or struts embedded in concrete, brickwork, masonary etc (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified & directed.

M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, mass filling , sub base and the like complete all as specified & directed.

M & L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in plinth protection complete all as specified and directed.

M & L for coloured chequered cement concrete tiles 20x20x25mm thick, with grey cement pigments, set, jointed and pointed in neat cement slurry in floors including 15 thick screed bed in CM ( 1:6) complete all as specified & directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

S&F Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre,thickness of concrete 25cm or less complete all as specified & directed.

M&L for 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for 100 mm thick concrete slab complete all as specified & directed.

S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S & F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified and directed.

S&F mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for 1.25mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as spcified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repair galvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc as directed ( each line wire to be measured) complete all as specified and directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar workconforming to Fe.290.Gde-E-165.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.

Dismantling timber scantlings fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section in unframed work complete all as directed.

S & F 9 mm thick plywood grade BWR, type BB fixed with nails to wooden framework as in walls complete all as specified and directed.

S & F 9 mm thick plywood grade BWR, type BB fixed with nails to wooden framework as in ceiling/sloping portion complete all as specified and directed.

S & F second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.

M & L for second class hard wood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed .

S & F second class hard wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge.

S & F second class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. complete all as specified.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S&F Steel ventilators with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified.

S&F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.

S&F anodised aluminium barrel tower bolt extruded sections 200 mm size complete all as specified and directed.

S&F 150mm long, Aluminium handles, cast type,anodised complete all as specified and directed.

S&F Mild steel sliding door bolt 300 mm long plate type slove enamelled black wioth bright bolt not less than 12mm dia with and incl a minimum of 6 bolt and nut four on bolt plate and two on staple plate and fixed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames metal frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair 1.25mm Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type but gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F in repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L for coloured non-skid ceramic tiles 7 to 8mm thick ( square / rectangle) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and set and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15 thick screed bed in CM ( 1:6) complete all as specfied and directed.

M & L for coloured glazed ceremic tiles in vertical surfaces 450X 350X 7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15mm thick rendering in CM (1:4) complete all as specfied and directed.

M&L for 40mm thick Cement concrete type B-1,1:2:4 (20mm graded crushed stone aggregate) in PCC flooring finishing even and smooth without using extra cement complete all as specfied and directed.

S&F 38mm wide Glass dividing strips, 3 mm thick complete all as specfied and directed.

Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick cement plaster in cement mortar (1:4) finished even & fair without using extra cement on brick/concrete surfaces.

M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces.

M&L for two coats of oil bound distemper on newly plastered surfaces of walls including preparation of surfaces.

M&L for two coats of cement based paint on newly plastered surfaces of walls including preparation of surfaces.

M&L for applying one coat of cement based paint on old plastered surfaces of walls including preparation of surfaces complete all as specified & directed.

M&L for applying one coat of oil bound distemper on old plastered surfaces of walls including preparation of surfaces complete all as specified & directed.

M&L for applying two coats of white wash on old plastered surfaces of walls including preparation of surfaces complete all as specified & directed.

M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of redoxide primer including preparation of surface complete all as specified & directed.

M&L for preparing old steel surfaces of any description over 10cm width/girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface.

M&L for preparing old wooden surfaces of any description over 10cm width/girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.

Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete.

All as per Srl item No 02 here in before but for one 3 pin 5 Amps switch socket on same board.

All as per Srl item No 02 here in before but for one 3 pin socket outlet 5 Amps on independent board.

Description all as per item No 02 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for industrial plug socket. point including running of 2.5 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dully.

Switch piano flush type 5 Amps, single pole one way.

Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.

Switch socket combination 2 in 1, 5 and 15 Amps flush type.

Ceiling rose surface bakelite 65x50mm, two to three terminals.

S&F Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 6 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.

Sheet metal enclosure for DB's single door, single pole and neutral, 240V, 4 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed.

MCB, single pole and neutral, 63 Amp, 240V, 10KA.

MCB, single pole, 5 to 32 Amp, 240V, 10KA.

Sub main wiring with two single core 6 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 4 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete all as specified.

M&L for Earthing complete with galvanised steel earth plate electrode 600mm x 600mm and 6mm thick buried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of plate not less than 1.5 metres below normal ground level, connected to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron protected by provision of G I light grade pipe 40mm bore including provision of concrete pit in PCC 1:2:4 type B1 using 20mm grade stone aggregate with 40mm thick cover of RCC 1:2:4 reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs two number and with 6mm dia MS bar handle made to shape and GI medium grade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 40mmx8mm flat iron with fixing arrangement funnel wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50M all as per electric plate No 5 of SSR Part-I conected to earth test point as specified or indicated including testing on completion.

Supply & fix LED building security light 45 watt energy efficient with bracket,suitable dia pipe for fixing the street light in wall all as directed.Make Havells Cat part No.ENDURAPERLINEOSL60WLED75PASYTOPC or equivalent in PHILIPS/WIPRO

S&F 1100 volts grade heavy duty 6 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.

S&F 1100 volts grade heavy duty 16 sqmm 2 core flat cableb PVC insulated aluminium stranded conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire withtwo single core cable complete all as specified.

Supply and fixing LED 18 Watt Tubelight fitting decorative ultra slim square profile linear with extruded polycarbonate environment friendly Make Havells Cat part LHEXBTP7INW018/ LHEXBTP71N1W018

Note : Deduction for amount of Rs 42,735.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S MOHD KHAN

M/S MOHD HUSSAIN