Providing Light arrangement around Medanta Hospital F-block sector-50 and Strengthening of Street Light arrangement in Central Market sector-50, Noida

Supply anf fixing 2.40 to 3.0 Mtr. Decoravive Poles made of square pipe duly CNC cut illuminated customised design fitted with Led Module and Acrylic /PC. 50watt CNC cut portion and 4x2.5 watt LED Moduled on Top. Pipe dia 200x200x4mm, Base Plate 300x300x10 mm (Total wattage of pole 150 watt)

Supply, Installation, Testing and commissioning of standard 4.0 mtr High decorative pole with top post LED Fixture and foundation etc. Complete all accessories as required by E/I (AOR)(Luster/VAK/Mayfair or equivlant)

Supply , Installation , testing and commissioning of standard 4.0 Mtr. High (above ground) hot dip galvanized (grading of galvenisation average 70 micron or better as per IS 2629 or equivalent) pole, with stiffener, chain, allen bolt, foundation, single arm bracket, template, nut and bolts galvanized, factory finish base plate of size 200x200x12mm etc complete as required. The pole shall be made of 3mm thickness sheet with tolerance of +/- 5%. The column shall also be provided with flush door at the bottom with proper strengthening to the cutout of the door opening, a junction/loop box with heavy duty 3 phase , 32 Amp. connector with 16A DP MCB including all accessories complete as required derected by E/I. make- Bajaj/Valmont/Transrail (AOR)

Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect. . (PS No. 1443) Cat-AAA

Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. (PS No. 641).(Make - Bajaj/Valmont/Transrail)

S/Fixing of LED Street Light fitting having die cast Aluminium body and difuser with driver set suitable for 110 to 130 watt. Confirming to IP-66 and above protection. Complete in all respects. (PS No. 1424) Cat-AAA (make-LT/Bajaj/Havells/Crompton/Philips/Wipro)

Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.(PS No. 651) (Make - Bajaj/Valmont/Transrail)

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. (PS No. 1454) Cat-AAA ((make-LT/Bajaj/Havells/ Crompton /Philips/Wipro)

Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (Polycab, KEI, Havell's make)

(1) 10 Sq.mm. 04 Core (PS No. 501)