Construction of Chawki Rearing Centre CRC at Mulberry farm Nuner Ganderbal-Balance Work.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) mixed with 2% of integral water proofing compound by weight of cement and finishing neat.- complete

P/L high density (Minimum 400 micron) polthene film properly over the underlying mud phuska for waterproofing - complete

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick all complete.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) all complete.Payment shall be made as per actual measurement.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate

Providing and fixing aluminium hardware fittings of approved brand and manufacture superior quality incl. all necessary fittings/fixtures , screws, etc complete. I Hook

Heating point ( One heating point ) including wiring of lighting pointin 2.5Sq.mm PVC insulated copper wire and 4.00 Sq.mm PVC insulated Multistrand copper wire, 16 Amp one way switch, 10 Amp S pole MCB, Two way DB MCB and hylem sheet including placing and fixing in position deep junction of cast iron with network . Conduit pipes with necessary fittings in RCC work complete as per the directions of Incharge Engineer.

Providing and fixing of one Exhaust Fan including wiring for lighting points in 1.5 Sq.mm PVC insulated copper wire and 2.5Sq.mm PVC in multistrand copper wire Exhaust Fan Electronic fan dimmer, 6 Amp S pole MCB, 10 Amp DP MCB, 2 Way DB for Housing MCB or Lighting Circuits and hylem sheets including placing and fixing in position fan clamp boxes with MS Fan clamps connected with network conduit pipes with necessary fittings in RCC work complete as per the directions of Incharge Engineer.