REPAIR AND REPLACEMENT OF INTERNAL ELECTRICAL FITTINGS FIXTURES DBS AND SUBMAIN WIRING AT NEW NAUSENA BAUGH UNDER GE NB VISAKHAPATNAM

Amount

M & L for point wiring with two runs of single core 1.5 Sqmm (nominal area) PVC insulated unsheathed multistranded copper conductor cable FR (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) Concealed including flush type metal GI boxes for fixing switches, sockets, regulators etc. including provision of multistranded 1.5 Sqmm. copper conductor FR (ISI marked) as earth wire connected to common earth dolly and earth in distribution board, including tee bend, elbows, junction boxes etc including taking down existing point wiring along with fittings and fixtures except ligh fittings and making good the disturbed surfaces to match with adjoining surface complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch complete all as specified and as directed.

All as per item No. 1.00 above but for One light point controlled by two way switch complete all as specified and as directed.

All as per item No. 1.00 above but for One 3/5 pin socket outlet 6 amps on independent board complete all as specified and as directed.

All as per item No. 1.00 above but for One 3/5 pin socket outlet 6 amps point on same board complete all as specified and as directed.

All as per item No. 1.00 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistranded FR (ISI marked) and 2.5 sqmm PVC insulated unsheathed solid copper conductor cable FR (ISI marked) as earth lead complete all as specified and as directed. [i] Note for Item No. 1 to 5 : (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one)

M & L for Sub main wiring with 4 runs of Single core 10 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FR (ISI marked) copper cable drawn through existing surface / ceiling / concealed steel / PVC conduit along with 1 run of single core 10 sqmm PVC insulated multi stranded FR (ISI marked) copper cable as earth continuity conductor including taking down the existing submain wiring and making good the disturbed surfaces to match with adjoining surface complete all as specified and as directed. (Note :- Four runs of 10 sqmm and one runs of 10 sqmm cable as earth will be measured as one length)

M & L for Sub main wiring with 4 runs of Single core 6 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FR (ISI marked) copper cable drawn through existing surface / ceiling / concealed steel / PVC conduit along with 1 run of single core 6 sqmm PVC insulated multi stranded FR (ISI marked) copper cable as earth continuity conductor including taking down the existing submain wiring and making good the disturbed surfaces to match with adjoining surface complete all as specified and as directed. (Note :- Four runs of 6 sqmm and one runs of 6 sqmm cable as earth will be measured as one length)

M & L for Sub main wiring with 2 runs of Single core 4 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FR (ISI Marked) copper cable drawn through existing surface / ceiling / concealed steel / PVC conduit along with 1 run of single core 4 sqmm PVC insulated multi stranded FR (ISI Marked) copper cable as earth continuity conductor including taking down the existing submain wiring and making good the disturbed surfaces to match with adjoining surface complete all as specified and as directed. (Note :- Two runs of 4 sqmm and one runs of 4 sqmm cable as earth will be measured as one length.)

M & L for Sub main wiring with 2 runs of Single core 2.5 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FR (ISI Marked) copper cable drawn through existing surface / ceiling / concealed steel / PVC conduit along with 1 run of single core 2.5 sqmm PVC insulated multi stranded FR (ISI Marked) copper cable as earth continuity conductor including taking down the existing submain wiring and making good the disturbed surfaces to match with adjoining surface complete all as specified and as directed. (Note :- Two runs of 2.5 sqmm and one runs of 2.5 sqmm cable as earth will be measured as one length.)

S & F Lamp Holder, PVC/ Polycarbonate type with backplate suitable for batten fitting complete all as specified and as directed.

S & F in repairs Lamp Holder, PVC/ Polycarbonate type with backplate suitable for batten fitting complete all as specified and as directed.

S & F ceiling rose, 65 X 50mm two to three terminals, PVC/polycarbonate, insolated body complete all as specified and directed.

S & F in repairs ceiling rose, 65 X 50mm two to three terminals, PVC/ polycarbonate, insolated body complete all as specified and directed.

S & F in repairs Bipin holder for 40W FTL complete all as specified and as directed

S & F Non retrofit CFL holder for 9/11/13W CFL light fittings complete all as specified and as directed

S & F in repairs Non retrofit CFL holder for 9/11/13W CFL light fittings complete all as specified and as directed

S & F Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed.

S & F in repairs Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed.

Supply and fix in repair fan capacitors of 2.5 Mfd complete all as specified and as directed. (Make : Havells/USHA/TIBCON)

S & F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S & F in repair Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S & F Socket outlet 2 in 1, 3 pin, 6A/16A, 230V, 50Hz, flush type complete all as specified and as directed.

S & F in repairs Socket outlet 2 in 1, 3 pin, 6A/16A, 230V, 50Hz, flush type complete all as specified and as directed.

S & F Switch socket combination 2 in1, 3 pin, 6 and 16Amp, flush type, universal complete all as specified and as directed.

S & F in repairs Switch socket combination 2 in1, 3 pin, 6 and 16Amp, flush type, universal complete all as specified and as directed.

S & F steped type modular fan regulator ,100/120 W 1/ 2 module complete all as specified and as directed.

S & F in repairs steped type modular fan regulator ,100/120 W 1/ 2 module complete all as specified and as directed.

S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed.

S & F in repairs switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed.

S & F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed.

S & F in repairs switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed.

S & F Modular socket outlet 6A, 2/3 pin combined, 2 module,AC 230V, 50HZ,conforming to IS 1293 :2005 (incl all revisons and amendments). complete all as specified and as directed.

S & F in repairs Modular socket outlet 6A, 2/3 pin combined, 2 module,AC 230V, 50HZ,conforming to IS 1293 :2005 (incl all revisons and amendments). complete all as specified and as directed.

S & F Modular socket outlet 6A/16A, 2/3 pin combined, 2 module,AC 230V, 50HZ,conforming to IS 1293 :2005 (incl all revisons and amendments) complete all as specified and as directed.

S & F in repairs Modular socket outlet 6A/16A, 2/3 pin combined, 2 module,AC 230V, 50HZ,conforming to IS 1293 :2005 (incl all revisons and amendments) complete all as specified and as directed.

S & F switch piano Flush type, single pole one way 6 Amp 240 volts, complete all as specified and as directed.

S & F in repairs switch piano Flush type, single pole one way 6 Amp 240 volts, complete all as specified and as directed.

S & F switch piano Flush type, single pole one way 16 amp 240 volts, complete all as specified and as directed.

S & F in repairs switch piano Flush type, single pole one way 16 amp 240 volts, complete all as specified and as directed.

S & F switch piano Flush type, single pole two way 6 amp 240 volts, complete all as specified and as directed.

S & F in repairs switch piano Flush type, single pole two way 6 amp 240 volts, complete all as specified and as directed.

S & F bell push flush type, 6 amp 240 volts, complete all as specified and as directed.

S & F in repairs bell push flush type, 6 amp 240 volts, complete all as specified and as directed.

S & F Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

S & F in repairs Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

S & F Modular white cover plate with frame, but 1 module complete all as specified and as directed.

S & F Modular white cover plate with frame, but 2 module complete all as specified and as directed.

S & F Modular white cover plate with frame, but 3 module complete all as specified and as directed.

S & F Modular white cover plate with frame, but 4 module complete all as specified and as directed.

S & F Modular white cover plate with frame, but 6 module complete all as specified and as directed.

S & F in repairs Modular metal flush box, but 1/2/3 module complete all as specified and as directed.

S & F in repairs Modular metal flush box, but 4 module complete all as specified and as directed.

S & F in repairs Modular metal flush box, but 6 /8module complete all as specified and as directed.

S & F in replacement Distribution Board, TPN, 8 way, Double door with IP 54 protection including taking down existing fittings and fixtures and making good the disturbed surfaces to match with adjoining surface complete all as specified and as diretced complete all as specified and directed. (Make : Indo Asian Cat Part No. 811860 [ Optipro] or equivelant of make as per List of manufacturer's)

S & F in replacement Distribution Board, TPN, 6 Way, Double door with IP 54 protection including taking down existing fittings and fixtures and making good the disturbed surfaces to match with adjoining surface complete all as specified and as diretced complete all as specified and directed. (Make: Indo Asian Indo Asian cat part No. 811859 or equivalent make as per List of Manufacturer's)

S & F in replacement Distribution Board, TPN, 4 way, Double door with IP 54 protection including taking down existing fittings and fixtures and making good the disturbed surfaces to match with adjoining surface complete all as specified and as diretced complete all as specified and directed. (Make: Indo Asian Indo Asian cat part No. 811857 or equivalent make as per List of Manufacturer's)

S & F in repairs Distribution Board, SPN 12 Way, Double door with IP 54 protection including taking down existing fittings and fixtures and making good the disturbed surfaces to match with adjoining surface complete all as specified and as directed. (Make : Indo Asian cat part No. 811828 [Optipro] or equivelant of make as per List of manufacturer's)

S & F in repairs Distribution Board, SPN 8 Way ,Double door with IP 54 protection including taking down existing fittings and fixtures and making good the disturbed surfaces to match with adjoining surface complete all as specified and as directed. (Make : Indo Asian cat part No. 811826 [Optipro] or equivelant of make as perList of manufacturer's)

S & F in repairs Distribution Board, SPN 4 Way ,Double door with IP 54 protection including taking down existing fittings and fixtures and making good the disturbed surfaces to match with adjoining surface complete all as specified and as directed. (Make : Indo Asian cat part No. 811824 [Optipro] or equivelant of make as perList of manufacturer's)

S & F MCB SP 6 to 32 Amps, 240 Volts, B Curve, complete all as specified and as directed (Make : Indo Asian Cat part No. 811008 to 811015[ Optipro] or equivelant of make as perList of manufacturer's)

S & F in repairs MCB SP 6 to 32 Amps, 240 Volts, B Curve, complete all as specified and as directed (Make : Indo Asian Cat part No. 811008 to 811015[ Optipro] or equivelant of make as perList of manufacturer's)

S & F MCB SPN 6-32A Amps 240 Volts MCB B Curve , complete all as specified and as directed (Make : Indo Asian Cat part No. 811027 to 811034[ Optipro] or equivelant of make as perList of manufacturer's)

S & F in repairs MCB SPN 6-32A Amps 240 Volts MCB B Curve , complete all as specified and as directed (Make : Indo Asian Cat part No. 811027 to 811034[ Optipro] or equivelant of make as perList of manufacturer's)

S & F MCB SPN 40 Amps, 240 Volts, C Curve complete all as specified and as directed. (Make : Indo Asian Cat part No. 811152[ Optipro] or equivelant of make as perList of manufacturer's)

S & F in repairs MCB SPN 40 Amps, 240 Volts, C Curve complete all as specified and as directed. (Make : Indo Asian Cat part No. 811152[ Optipro] or equivelant of make as perList of manufacturer's)

S & F MCB TPN 40 Amps, 240 Volts, C Curve complete all as specified and as directed. (Make : Indo Asian Cat part No. 811218 [ Optipro] or equivelant of make as perList of manufacturer's)

S & F in repairs MCB TPN 40 Amps, 240 Volts, C Curve complete all as specified and as directed. (Make : Indo Asian Cat part No. 811218 [ Optipro] or equivelant of make as perList of manufacturer's)

S & F MCB, TPN 63 Amps 415 Volts , C Curve , complete all as specified and as directed (Make : Indo Asian Cat part No. 811220 [ Optipro] or equivelant of make as perList of manufacturer's)

S & F in repairs MCB, TPN 63 Amps 415 Volts , B Curve , complete all as specified and as directed (Make : Indo Asian Cat part No. 811220 [ Optipro] or equivelant of make as perList of manufacturer's)

S & F MCB, TP 40 Amps 415 Volts , C Curve , complete all as specified and as directed (Make : Indo Asian Cat part No. 811196 [ Optipro] or equivelant of make as perList of manufacturer's)

S & F in repairs MCB, TP 40 Amps 415 Volts , C Curve , complete all as specified and as directed (Make : Indo Asian Cat part No. 811196 [ Optipro] or equivelant of make as perList of manufacturer's)

S & F in repairs Concealed sheet metal enclosure with socket plug top and MCBs having single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20Amp 240V complete all as specified and as directed.

Taking down ceiling fan / EXHAUST FAN any sweep from the site and replacing the defective parts such as shakle & clamps including, rubber bush, bolts, nuts & split pin (Chera Pin), washer etc. for ceiling fan and ensure proper inserting the quarter/ Split pin to hold the nut and bolt on fan downrod at fix position including servicing, oiling and greasing and re-fixing the ceiling fan / exhaust fan of any sweep again at existing site all as specified and as directed .

S & Fix repairs of single core 1.5 Sqmm size cable (nominal area) PVC insulated unsheathed multistranded FR copper conductor cable 1100 Volts [ISI marked ] drawn through existing point wiring complete all as specified and as directed.

All as per item No. 74 above but of cable size 2.5 Sqmm size cable complete ditto.

All as per item No. 74 above but of cable size 4 Sqmm complete ditto.

S & F in repair twin core, PVC insulated, unsheathed, multistranded copper flexible conductor cable, 1100 vols grade ISI marked of size 0.75 sqmm complete all as specified and as directed.

S & F in replacement two pole and earth Metal clad industrial plug & socket, 250V, 20A complete all as specified and as directed. (Make: Indo Asian Cat Pt No for Plug - 20A 2P+E, 230V AC (810386) and for Socket - 20A 2P+E, 230V AC (810390) or equivalent make as per List of Manufacturer's)

S & F Residual Current Circuit Breaker RCCB - 2 Pole 40 Amps, and Sensitivity of 30 mA complete all as specified and as directed . (Make: Indo Asian. Cat Part No.811701 [ Optipro] or equivelant of make as per List of Manufacturer's)

S & F in repairs for Residual Current Circuit Breaker RCCB - 2 Pole 40 Amps, and Sensitivity of 30 mA complete all as specified and as directed . (Make: Indo Asian. Cat Part No.811701 [ Optipro] or equivelant of make as per List of Manufacturer's)

S & F for Residual Current Circuit Breaker RCCB - 2 Pole 40 Amps 100mA complete all as specified and as diretced. (Make: /Indo Asian. Cat Part No.811707 [ Optipro] or equivelant of make as per List of Manufacturer's)

S & F in repairs for Residual Current Circuit Breaker RCCB - 2 Pole 40 Amps 100mA complete all as specified and as diretced. (Make: /Indo Asian. Cat Part No.811707 [ Optipro] or equivelant of make as per List of Manufacturer's)

S & F for Residual Current Circuit Breaker RCCB - 4 Pole 40 Amps 30mA complete all as specified and as diretced. (Make: /Indo Asian. Cat Part No.811719 [ Optipro] or equivelant of make as per List of Manufacturer's)

S & F in repairs for Residual Current Circuit Breaker RCCB - 4 Pole 40 Amps 30mA complete all as specified and as diretced. (Make: /Indo Asian. Cat Part No.811719 [ Optipro] or equivelant of make as per List of Manufacturer's)

S & F for Residual Current Circuit Breaker RCCB - 4 Pole 40 Amps 100mA complete all as specified and as diretced. (Make: /Indo Asian. Cat Part No.811725 [ Optipro] or equivelant of make as per List of Manufacturer's)

S & F in repairs for Residual Current Circuit Breaker RCCB - 4 Pole 40 Amps 100mA complete all as specified and as diretced. (Make: /Indo Asian. Cat Part No.811725 [ Optipro] or equivelant of make as per List of Manufacturer's)

S & F in repairs MCCB 415 Volt 16 KA, 4 Pole, 63 Amps Capacity complete all as specified and as directed . (Make: /Indo Asian. Cat Part No. 830020 or equivelant of make as per List of Manufacturer's)

S & F in repairs MCCB 415 Volt, 25 KA, 4 Pole, 100 Amps Capacity complete all as specified and as directed. (Make: /Indo Asian. Cat Part No. 830052 or equivelant of make as per List of Manufacturer's)

S & F in repairs MCCB 415 Volt, 25 KA, 4 Pole, 125 Amps Capacity complete all as specified and as directed. (Make: /Indo Asian. Cat Part No. 830053 or equivelant of make as per List of Manufacturer's)

S & F in repairs 3mm thick backelite sheet (hylam) as sheet cover of size 6"x4" for fixing switches, sockets & regulator etc complete all as specified and as directed.

S & F in repairs 3mm thick backelite sheet (hylam) as sheet cover of size 6"x6" for fixing switches, sockets & regulator etc complete all as specified and as directed.

S & F in repairs 3mm thick backelite sheet (hylam) as sheet cover of size 10"x8" for fixing switches, sockets & regulator etc complete all as specified and as directed.

S & F in repairs 3mm thick backelite sheet (hylam) as sheet cover of size 12"x10" for fixing switches, sockets & regulator etc complete all as specified and as directed.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core including taking out old one complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately)

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core including taking out old one complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately)

Material and Labour for preparation of old metal surfaces of Panel Boards after complete removal of existing painting over 10cm width or girth not otherwise described and applying two coats of enamel paint (1st quality) of simens grey colour over a coat red oxide zinc chrome primer and marking the Qtr No, Panel Board No in front side complete all as specified and directed by engineer in Charge. (Note: Adjoing aresa there to properly covered befor painting.Adjoing areas, floor, walls are to cleaned free of paint spillage after painting work. If Paint spill is not cleaned to match with exsting surface a panel recovery @ Rs.200/- per location will be made from payments due to the contractor).

M & L for Repairs to Panel board indoor type sheet metal approximate szie (5 x5 x 1.5 Feet's) parts tinkering the parts and replacing fully corroded sheet metal parts like base plate, top plate, front cover etc with appropriate gauges MS sheet including bending to match with the existing size, welding brazing and assembling including replacing all nuts & bolts in MCBs and proper legging in cable and control wire sheet metal screws metal screws and painting the complete body with two coat of synthetic enamel paint over a coat of Zinc chrome primer and marking the Qtr No, Panel Board No in front side and all as specified and as directed

S & F in repairs Aluminium strip of size 25x3.15 mm for lightning conductor (roof conductors)/down conductors) laid in trench/floor including necessery clamps, nuts, bolts and hylem sheet block complete all as specified and as directed.

S & F in repairs GI strip of size 25x4mm for lightning conductor laid in trench / floor including necessery clamps, nuts, bolts and hylem sheet block complete all as specified and as directed.

Fixing only in repairs to old existing Aluminium strip/copper strip of any size with saddles and fixing screws etc (same as per existing ) for roof conductor and down conductors above ground complete all as specified and as directed.

S & F in repairs Air termination, single pointed aluminium rod 12mm dia and 300mm long and fixed complete all as specified and as directed.

S & F in repairs Test terminal box of size 175x150x100mm made out of 2mm thick hot dip galvanised sheet drilled and screwed including 4 nos 125mm long hexogonal head screwed with test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and as directed.

Supply and fix in replacement high voltage synthetic insulating mat recommended for safety of worker on up to 3.3 KV, black or blue colour Class A of size 2m x 1m x 10 mm complete all as specified and directed (Make : ASIN/JYOTI/GENERIC or its equivalent as approved).

S & F Switch socket combination 2 in 1, 5 pin, 6 Amps, flush type, 240 volts complete all as specified and directed.

S & F in repairs Switch socket combination 2 in 1, 5 pin, 6 Amps, flush type, 240 volts complete all as specified and directed.

SREE DURGA INFOTECH

P Govinda Reddy Infrastructure

VARADHI ENTERPRISES

SRIKRISHNACONSTRUCTIONS

M/S CHANDRA ENGINEERS AND CONTRACTORS

Sri Vayuputra Constructions

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS

P MURALIDHAR ENGINEERS AND CONTRACTORS

SAI POWER SYSTEMS

M/s Balaji Enterprises

MANIMADHAVI ENTERPRISES