Construction of New Guest House at Rourkela Club, Sec 20 in Steel Township at Rourkela (Odisha).

Sl. No. Description of Item DSR 2023 Amount NON DSR Items

2 Civil Finishing 47,80,182.76 31,500.00

TOTAL DSR + MR 1,07,82,176.88

Digitally signed by Rakesh

PROJECT : GUEST HOUSE ROURKELA CLUB

BILL OF QUANTITIES FOR STRUCTURE WORK

S.No DESCRIPTION OF ITEM UNIT 2023 Quantity Amount

1.00 2.0 EARTH WORK

1.1 1 Carriage of material

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means

in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),

including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means

in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),

1.1.1 2.8 including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting

out the excavated soil and disposal of surplus excavated soil as directed, within a lead

1.1.2 2.8.1 All kinds of soil. Cum 260.3 48 12,494

Excavating, supplying and filling of local earth (including royalty) by mechanical

transport upto a lead of 5km also including ramming and watering of the earth in

layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Clearing Jungle including uprooting of rank vegetation , grass, wood ,bruch ,trees and

sapling of grith up to 30cm measured at a height of 1 meter above ground level and

removal of rubbish up to a distance of 30m outside the periphery of area cleared.

Supplying chemical emulsion in sealed containers including delivery as specified.

Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 234.75 28.8 6,761

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL

anti-termite treatment (excluding the cost of chemical emulsion) :

1.4.1 2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration metre 53.45 27.2 1,454

2.35.4.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration metre 43 27.2 1,170

2.0 4.0 CEMENT CONCRETE WORK (CAST-IN-SITU)

Providing and laying in position cement concrete of specified grade excluding the cost

of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal

1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse

sand ( zone-III) derived from natural sources: 6 graded stone aggregate 20mm nominal

size derived from natural sources) over 75mm thick bed of dry brick ballast 40mm

nominal size. well rammed and consolidated and grouted with fine sand, including

necessary excavation, levelling & dressing & finishing the top smooth.

Providing and fixing up to floor five level precast cement concrete string or lacing

courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps,

2.3 4.5 staircases, etc., including hoisting and setting in position with cement mortar 1:3 (1

cement : 3 coarse sand), cost of required Centering complete.

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources :3

2.3.1 4.5.1 graded stone aggregrate 20mm nominal size derived from natural sources)

3.0 5.0 REINFORCED CEMENT CONCRETE

DESIGN MIX CONCRETE

Reinforced cement concrete work in beam , suspended floors , roofs having slope up

to 15 landing , balconies , shelves , chajjas , lintels , bands, plain window sills ,

staircases and spiral stair cases above plinth level up to floor five level, excluding the

cost of centering , shuttering , finishing and reinforcements with 1:1:5:3 (1 Cement

:1.5 coarse sand (zone -III) derived from natural sources :3 graded stone aggregate

20mm nominal size derivd from natural sources)

Providing and laying in position specified grade of reinforced cement

3.2 5.1 concrete, excluding the cost of centering, shuttering, finishing and

reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural

3.2.1 5.1.2 sources : 3 graded stone aggregate 20 mm nominal size de

rived from natural sources)

5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Cum 9504.75 29.6 2,81,341

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15° landings, balconies, shelves, chajjas, lintels,

bands, plain window sills, staircases and spiral stair cases above plinth

3.2.2 5.3 level up to floor five level, excluding the cost of centering, shuttering, Cum 11505.50 45.0 5,17,748

finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse

sand(zone-III) derived from natural sources : 3 graded stone aggregate

20 mm nominal size derived from natural sources).

Digitally signed by Rakesh

S.No DESCRIPTION OF ITEM UNIT 2023 Quantity Amount

Centering and shuttering including strutting, propping etc. and removal of form for:

3.3.2 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 392.15 42.6 16,690

3.2.3 5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 927.25 24.8 22,996

3.2.4 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 736.4 58.4 43,006

3.2.5 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 961.3 172.0 1,65,344

3.2.6 5.9.7 Stairs, (excluding landings) except spiral-staircases Sqm 764.95 26.4 20,195

3.4 5.0 STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level.

3.4.1.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 107.85 736.0 79,378

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

3.4.2.1 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 107.85 8142.4 8,78,155

Suspended floors , roofs , landings, beams and balconies (plan area to be measured)

Total 32,50,699

Digitally signed by Rakesh

B.O.Q OF GUEST HOUSE ROURKELA CLUB

DSR Code- Description of Indicative Items Amount as per

S.No. Unit Rate DSR-23 Qty

1 MASONRY WORK

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation

1.1 6.1 7.5 in foundation and plinth in

1.1.1 6.1.2 Cement mortar 1:6 (1 Cement : 6 coarse sand) Cum 7132.25 20.95 1,49,435

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level upto floor V level.

1.3.1 6.13.2 Cement mortar 1:4 (1 Cement : 4 coarse sand) Sqm 1123.8 1.20 1,349

Providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of

half Block masonry Sqm 104.8 3.66 383.568

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation

7.5 in superstructure above plinth level up to floor V in all shapes and sizes in:

1.5 6.4.2 Cement Mortar 1:6 (1 Cement : 6 coarse sand) Cum 9105.95 125.72 11,44,800

2 PLASTERING AND LINING WORK

2.1 13.16 6 mm cement plaster of mix : -

2.2 13.1 12 mm cement plaster of mix : -

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1

2.3 13.12 cement :5 coarse sand ) and a top layer 6mm thick cement plaster 1:3 (1 cement :3

coarse sand ) finished rough with sponge Sqm 537.45 308.00 1,65,535

3 INTERNAL & EXTERNAL PAINTING

Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and

manufacture, including applying additional coats wherever required to achieve even

shade and colour

Providing and applying white cement based putty of average thickness 1 mm, of

3.2 13.80 approved brand and manufacturer, over the plastered wall surface to prepare the

surface even and smooth complete. Sqm 156.05 920.00 1,43,566

3.3 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade:

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat

of exterior primer applied @0.90 litre/10 sqm) Sqm 160.6 308.00 49,465

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand

3.4 13.51.1 and manufacture on wet or patchy portion of plastered surfaces :

5 FLOORING WORK

Providing and laying Polished Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building, all complete as per the architectural

drawings, with stone slab of Specified thickness over 20 mm (average) thick base of

5.1 11.56 cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and

pointing with white cement slurry admixed with pigment of matching shade, including

rubbing, curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

5.2 8.3 machine polishing to edge to give high gloss finish etc. complete as per design

approved by Engineer-in-Charge.

Providing and Laying Vitrified tiles in floor in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to

IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm

thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry

5.3 11.41A @3.3 kg/sqm including grouting the joints with white cement and matching pigments

etc. the tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will

be done with the notch trowel, piler, wedge, clips of required thickness, levelling system

and rubber mallet for placing the tiles gentle and easily.

5.3.1 11.41A.1 Double charge vitrified tile polished finish of size

5.3.2 11.41A.3 Glazed Vitrified tiles Matt/ Antiskid finish of size

6 INTERNAL & EXTERNAL DOORS

Providing wood work in frames of doors, windows, clerestory windows and other

frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners

of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

6.1.1 9.1.1 Second class teak wood Cum 142949.7 4.10 5,86,094

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I)

decorative type, core of block board construction with frame of 1st class hard wood and

well matched teak 3 ply veneering with vertical grains or cross bands and face veneers

on both faces of shutters. -

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Digitally signed by Rakesh

DSR Code- Description of Indicative Items Amount as per

S.No. Unit Rate DSR-23 Qty

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on

6.3 9.23 all edges of flush door shutters (over all area of door shutter to be measured).

Extra for Providing and fixing flush doors with decorative veneering instead of non

decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)

6.4.1 9.22.1 On one side only Sqm 478 1.00 478

Providing and fixing wooden moulded beading to door and window frames

6.5 9.40 with iron screws, plugs and priming coat on unexposed surface etc.

6.5.1 9.40.1 Second class teak wood

6.6 13.114 Melamine polishing on wood work (one or more coat). Sqm 1192.35 168.1232 2,00,462

Providing and fixing bright finished brass tower bolts (barrel type) with

necessary screws etc. complete : -

Providing and fixing bright finished brass 100 mm mortice latch and lock

6.8 9.76 with 6 levers and a pair of lever handles of approved quality with necessary

screws etc. complete. each 854.65 14.00 11,965

Providing and fixing bright finished brass 100 mm mortice latch with one

6.9 9.77 dead bolt and a pair of lever handles of approved quality with necessary

screws etc. complete. each 726.6 14.00 10,172

Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete. each 121.65 14.00 1,703

Two track two panel sliding window with Aluminium channel for roller track , wood pile,

nylon roller with SS 304 body

Using R3 series with frame (55mm and above) x (40mm and above) & sash (30mm

6.11.1 9.147.A1.2 and above) x (55mm and above) with zinc allow powder coated handlw on every panel

along with multi point locking system (height upto 1.8 meter) Sqm 8799.25 20.00 1,75,985

Ventilator casement window single panel with or without fixed panel with SS 304

6.12 9.147D1 friction hinge as per size and weight sash, single point locking zinc alloy powder coated

Using R1 series with frame (33mm and above) & sash/mulliion(33mm and above) x

50mm and above (height upto 0.90 meter) sqm 13201.2 12.00 1,58,414

Providing and fixing panelling or panelling and glazing in panelled or

panelled and glazed shutters for doors, windows and clerestory windows

6.13 9.7 (Area of opening for panel inserts excluding portion inside grooves or

rebates to be measured). Panelling for panelled or panelled and glazed

shutters 25 mm to 40 mm thick : -

Float glass panes

6.13.1 9.7.7.2 5.0 mm thick glass panes (weight not less

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash

fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter

6.14 10.27 sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of

hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

7 FALSE CEILING

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5

m above above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in

between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be

paid separately):

8 STEEL/ RAILING WORK

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel nuts

and bolts complete, i/c fixing the railing with necessary accessories & stainless steel

8.1 10.28 dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the

side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (

for payment purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.).

9 WATER PROOFING

Providing and fixing toilet paper holder :

CP Brass each 803.70 5.00 4,019

Providing and fixing 12mm thick frameless toughened glass door shutter and partition

of approved brand and manufacturer including providing and fixing top & bottom pivor

9.3 21.18 and double acting hydraulic floor spring type fixing arrangement and making necessary

holes etc. including door handle, lock, stopper etc. for fixing required door fittings all

complete as per direction of engineer in charge sqm 5325.90 14.00 74,563

Digitally signed by Rakesh

DSR Code- Description of Indicative Items Amount as per

S.No. Unit Rate DSR-23 Qty

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc.,

by applying cement slurry mixed with water proofing cement compound consisting of

applying: (a) First layer of slurry of cement @0.488 kg/sqm mixed with water proofing

cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @0.242 kg/sqm mixed with water proofing cement

compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed

with water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer mixed slurry.

11 MISCELLANEOUS

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size)

11.1 12.22 over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1

cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making

and finishing the outlet complete. Each 298.25 4.00 1,193

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass

11.2 14.28 brackets fixed with brass screws and wooden plugs etc. Wherever necessary

11.2.1 14.28.2 25 mm diameter

Total of schedule items 47,80,183

NON SCHEDULE ITEMS

Towel shelf 60.4 × 23.3 × NaN cm

Brass construction

14 NSI 3 Straight line design

All Accessories withstand the static load of 17kg- 22.5 kg

All Accessories withstand 2kg dropped from 1 fee Each 6000.00 4.00 24,000

Square Towel Ring 23.6 × 7.8 × 4.2 cm

Brass construction

15 NSI 4 Straight line design

All Accessories withstand the static load of 17kg- 22.5 kg

All Accessories withstand 2kg dropped from 1 fee Each 1500.00 5.00 7,500

Total of Non-schedule items 31,500

Digitally signed by Rakesh

Name of Project : GUEST HOUSE ROURKELA CLUB

Name of Work : Plumbing Works

S. Ref. Description of Item DSR

No. DSR- Rate DSR NSR

A Sanitary Installations & Internal Water Supply

1 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8)

kitchen sink as per IS 13983 with C.I. brackets and

stainless steel plug 40 mm including painting of

fittings and brackets, cutting and making good the

walls wherever required :

a 17.10.1.3 Kitchen sink with drain board 510x1040 mm bowl

2 17.31 Providing and fixing 600x400mm mirror of superior

glass (of approved quality) complete with 6 mm

thick hard board ground fixed to wooden cleats with

C.P. brass screws and washers complete.

3 17.28 Providing and fixing P.V.C. Waste pipe for sink or

wash basin including P.V.C. waste fittings complete.

a 17.28.1 Semi rigid pipe

4 DSR-17.22A Providing and fixing CP Brass 32mm size Bottle Trap

of approved quality & make and as per the direction

of Engineer-in-charge. Each 5 1034.80 5174.00 0.00

5 DSR-17.34 Providing and fixing toilet paper holder :

6 17.78 Providing and fixing white vitreous china extended

wall mounting water closet of size 780x370x690 mm

of approved shape including providing & fixing white

vitreous china cistern with dual flush fitting, of

flushing capacity 3 litre/ 6 litre (adjustable to 4

litre/ 8 litres), including seat cover, and cistern

fittings, nuts, bolts and gasket etc complete.

7 17.1 Providing and fixing water closet squatting pan

(Indian type W.C. pan ) with 100 mm sand cast Iron

P or S trap, 10 litre low level white P.V.C. flushing

cistern, including flush pipe, with manually

controlled device (handle lever) conforming to IS :

7231, with all fittings and fixtures complete,

including cutting and making good the walls and

floors wherever required

17.1.1 White Vitreous china Orissa pattern W.C. pan of size

580x440 mm with integral type foot rests Each 2 6767.4 13534.80 0.00

8.00 ,18.49 Providing and fixing C.P. brass bib cock of approved

quality conforming to IS:8931 :

9.00 ,18.53 Providing and fixing C.P. brass angle valve for basin

mixer and geyser points of approved quality

conforming to IS:8931

10.00 17.7 Providing and fixing wash basin with C.I. brackets,

15 mm C.P. brass pillar taps, 32 mm C.P. brass

waste of standard pattern, including painting of

fittings and brackets, cutting and making good the

walls wherever require:

17.7.2 White Vitreous China Wash basin size 630x450 mm

with a single 15 mm C.P. brass pillar tap: Each 5 2226.35 11131.75 -

11.00 18.21 Providing and fixing uplasticised PVC connection

pipe with brass unions : Each

18.21.2 45 cm length

Digitally signed by Rakesh

S. Ref. Description of Item DSR

No. DSR- Rate DSR NSR

12.00 NS-1 Providing and fixing C.P. cast brass twin coat hooks

fixed to PVC rawl plug with SS screws Each 5 363.07 0.00 1,815.37

13.00 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with

flexible tube upto 1 metre long with S.S. triangular

plate to Eureopean type W.C. of quality and make as

approved by Engineer - in - charge

14.00 17.72 Providing and fixing PTMT towel ring trapezoidal

shape 215 mm long, 200 mm wide with minimum

distances of 37 mm from wall face with concealed

fittings arrangement of approved quality and colour,

weighing not less than 88 gms Each 10 231.95 2319.50 -

15.00 17.71 Providing and fixing PTMT liquid soap container 109

mm wide, 125 mm high and 112 mm distance from

wall of standard shape with bracket of the same

materials with snap fittings of approved quality and

colour, weighing not less than 105 gms.

16.00 17.50 Providing and fixing white vitreous china flat back

half stall urinal of size 580x380x350 mm with white

PVC automatic flushing cistern, with fittings,

standard size C.P. brass flush pipe, spreaders with

unions and clamps (all in C.P. brass) with waste

fitting as per IS : 2556, C.I. trap with outlet grating

and other couplings in C.P. brass, including painting

of fittings and cutting and making good the walls

and floors wherever required

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic

flushing cistern Each 0 12071.75 0.00 -

19.00 NS-4 Providing and fixing horizontal type storage hot

water heater within-built pressure relief valve, rated

for inlet water pressure upto 6 bar complete in all

respects including inlet, oulet connections, fixing

bolts etc. and testing complete.

Capacity 15 litres

B Soil, Waste, Vent & Rain Water Pipes

20.00 12.22 Making khurras 45x45 cm with average minimum

thickness of 5 cm cement concrete 1:2:4 (1 cement

: 2 coarse sand : 4 graded stone aggregate of 20

mm nominal size) over P.V.C. sheet

1mx1mx400micron, finished with 12mm cement

plaster 1:3 (1 cement : 3 coarse sand) and a coat of

neat cement, rounding the edges and making and

finishing the outlet complete.

21.00 Providing and fixing to the inlet mouth of rain water

DSR-12.44 pipe cast iron grating 15 cm diameter and weighing

not less than 440 grams. Each 2 54.70 109.40 0.00

22.00 4.1 Providing and laying in position cement concrete

of specified grade excluding the cost of centering

and shuttering - All work up to plinth level:

4.1.3 1:2:4 (1 cement :2 coarse sand: 4 hard stone

aggregate 20mm and down gauge). Cum 12.15 7878.50 95723.78 0.00

23.00 12.41 Providing and fixing on wall face unplasticised Rigid

PVC rain, soil & waste water pipes conforming to IS

: 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for

thermal expansion, (i) Single socketed pipes..

Digitally signed by Rakesh

S. Ref. Description of Item DSR

No. DSR- Rate DSR NSR

23A NS Providing and fixing of uPVC Waste pipes 6 kg/cm2

(IS: 4985:2000) including with all fittings e.g.

couplings, tees, bends, reducers and screwed

adoptors jointing with solvent cement as per

Manufacturer's specifications complete including

cutting holes or chases in wall and making good the

same wherever required. (For Indirect

waste/ Wash Basin/Urinal/Sink/Floor

24.00 12.42 Providing and fixing on wall face unplasticised Rigid

PVC rain water pipes conforming to IS : 13592 Type

A, including jointing with seal ring conforming to IS

: 5382, leaving 10 mm gap for thermal expansion,

(i) Single socketed pipes.

12.42.1 Coupler

12.42.3 Single tee with door

12.42..4 Single tee without door

25.00 NS-5 Providing and fixing uPVC inlet fitting (Hopper)

maximum with 2 or 3 inlets of 40 to 63 mm OD size

fabricated from 110 OD uPVC pipe fixed to uPVC

trap jointing with solvent cement joint and set in a

cement concrete 1:2:4 mix complete including cost

of cutting and making good the walls and floors

wherever required.

26.00 NS-6 Providing and fixing UPVC, P or S trap of self

cleaning design with / without vent arm setting in

cement concrete 1:2:4 mix complete including cost

of cutting & making good the wall and floors

wherever required.

110 mm inlet & 110 mm outlet Each 14 391.00 0.00 5,474.00

27.00 NS-7 Providing and fixing in position 110x75 mm dia Upvc

Nahani Trap(floor Drain) including fix to floor with

cement mortor. Each 2 151.00 0.00 302.00

28.00 NS-8 Providing and fixing SS grating of approved quality

Circular type 125 mm nominal dia [Make

:Euronics, Model: EFG03-55C]. Each 16 587.00 0.00 9,392.00

29.00 NS-9 Providing and fixing floor cleanout plug, fixed to

UPVC Pipe with solvent joint complete in all

complete including cutting and making good the

walls and floor wherever required

30.00 NS-10 Providing and fixing in position 110 mm dia Vent

Cowl complete in all respects

C Internal Water Supply

31.00 18.70 Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply including all CPVC plain & brass

threaded fittings i/c fixing the pipe with clamps at

1.00 m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement and

testing of joints complete as per direction of

Engineer in Charge.

Internal Work - Exposed on Wall

a 18.7.3 25 mm nominal outer dia .Pipes. Metre 32 401.55 12849.60 0.00

a 18.7.4 32 mm nominal outer dia .Pipes. Metre 50 518.75 25937.50 0.00

Digitally signed by Rakesh

S. Ref. Description of Item DSR

No. DSR- Rate DSR NSR

b 18.7.5 40 mm nominal outer dia .Pipes. Metre 18 702.95 12653.10 0.00

32.00 ,18.8 Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply including all CPVC plain & brass

threaded fittings i/c fixing the pipe with clamps at

1.00 m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same

including testing of joints complete as per direction

of Engineer in Charge.

Concealed work including cutting chases and

making good the walls etc.

a 18.8.2 20 mm nominal outer dia .Pipes. Metre 110 537.60 59136.00 0.00

b 18.8.3 25 mm nominal outer dia .Pipes. Metre 22 627.25 13799.50 0.00

33.00 ,18.11 Providing and fixing G.I. pipes with two coats of

anti-corrosive bitumastic paint of approved quality :

complete with G.I. fittings and clamps, i/c cutting

and making good the walls etc.

Internal work - Exposed on Wall

a 18.11.1 15 mm dia nominal bore Metre 5 366.40 1832.00

b 18.11.2 20 mm dia nominal bore Metre 5 383.05 1915.25 0.00

34.00Fire DSR - 18.Providing, laying, testing & commissioning of 'B'

class heavy duty G.I. pipe conforming to IS 1239

including welding, fittings like elbows, tees, flanges,

tapers, nuts, bolts, gaskets etc. and fixing the pipe

on the wall/ceiling with suitable clamp/support

frame and painting with two or more coats of

synthetic enamel paint of required shade complete

c DSR Fire- 25 mm dia nominal bore

d DSR Fire- 32 mm dia nominal bore

e DSR Fire- 40 mm dia nominal bore

f DSR Fire- 50 mm dia nominal bore

g DSR Fire- 65 mm dia nominal bore

h DSR Fire- 80 mm dia nominal bore

35.00 DSR-18.32 Constructing masonry Chamber 30x30x50 cm

inside, in brick work in cement mortar 1:4 (1

cement :4 coarse sand) for stop cock, with C. I.

surface box 100x100 x75 mm (inside) with hinged

cover fixed in cement concrete slab 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), i/c necessary excavation,

foundation concrete 1:5:10 ( 1 cement : 5 fine sand

: 10 graded stone aggregate 40 mm nominal size )

and inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12mm thick, finished with a

floating coat of neat cement complete as per

standard design :

a 18.32.1 With common burnt clay F.P.S.(non modular) bricks

of class designation 7.5 Each 1 1992.60 1992.60 0.00

36.00 DSR-18.48 Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS : 12701

marked, with cover and suitable locking

arrangement and making necessary holes for inlet,

outlet and overflow pipes but without fittings and

the base support for tank. Litre 2000 11.00 22000.00 0.00

Digitally signed by Rakesh

S. Ref. Description of Item DSR

No. DSR- Rate DSR NSR

37.00 DSR-18.77 Making core cutting machine up to 15x15 cm in

R.C.C. floors and roofs for passing drain pipe etc.

and repairing the hole after insertion of drain pipe

etc. with cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm

nominal size), including finishing complete so as to

make it leak proof.

38.00 18.17 Providing and fixing gun metal gate valve with C.I.

wheel of approved quality (screwed end) :

18.17.1 25 mm nominal bore Each 6 622.4 3734.40

18.17.2 32 mm nominal bore Each 4 689.6 2758.40

18.17.3 40 mm nominal bore Each 1 826.1 826.10

18.17.4 50 mm nominal bore Each 2 1026.65 2053.30

39.00 18.19 Providing and fixing gun metal non- return valve of

approved quality (screwed end) :

40.00 NS 11 Providing and fixing forged brass ball valve of brass

body with hard chrome plated steel ball inside PTFE

(Teflon) seat & ring with chrome plated centre

handle with female BSP threads complete in all

a 15 mm nominal bore Each 10 380.00 0.00 3800.00

b 20 mm nominal bore Each 6 497.00 0.00 2982.00

41.00 18.59 Providing and fixing C.I. double acting air valve of

approved quality with bolts, nuts, rubber insertions

etc. complete (The tail pieces, tapers etc if required

will be paid separately) :

42.00 Providing and fixing ball valve (brass) of approved

quality, High or low pressure, with plastic floats

18.18 complete :.

43.00 18.13 Making connection of G.I. distribution branch with

G.I. main of following sizes by providing and fixing

tee, including cutting and threading the pipe etc.

3.0 External Sewerage System

44.0 DSR-2.10 Excavating trenches of required width for pipes,

cables, etc including excavation for sockets, and

dressing of sides, ramming of bottoms, depth upto

1.5 m, including getting out the excavated soil, and

then returning the soil as required, in layers not

exceeding 20 cm in depth, including consolidating

each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed,

within a lead of 50 m :

a 2.10.2 Pipes, cables etc. exceeding 80 mm dia. but not

exceeding 300 mm dia Metre 80 352.15 28172.00 0.00

45.0 DSR-2.11 Extra for excavating trenches for pipes, cables etc.

in all kinds of soil for depth exceeding 1.5 m, but

not exceeding 3 m. (Rate is over corresponding

basic item for depth upto 1.5 metre).

a a. Pipes, cables etc. exceeding 80 mm dia. but not

exceeding 300 mm dia Metre 8 447.23 3577.84 0.00

Digitally signed by Rakesh

S. Ref. Description of Item DSR

No. DSR- Rate DSR NSR

46 ,19.4 Fixing SW Gully Trap Grade A Complete CI Grating,

brick masonry chamber and water tight CI cover

frame of 300 x 300 mm size (inside) square mouth

traps or "P" or "S" Type Traps.

47 19.7 Constructing brick masonry manhole in cement

mortar 1:4 (1 cement : 4 coarse sand) with R.C.C.

top slab with 1:1.5:3 mix (1 cement : 1.5 coarse

sand (zone- III) : 3 graded stone aggregate 20 mm

nominal size), foundation

concrete 1:4:8 mix (1 cement : 4 coarse sand

(zone- III) : 8 graded stone aggregate 40 mm

nominal size), inside plastering 12 mm thick with

cement mortar 1:3 (1 cement : 3 coarse sand)

finished with floating coat of neat cement

and making channels in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size) finished with a floating coat of

neat cement complete as per standard design :

a (A) Inside size 90×80 cm and 45 cm deep including

C.I. cover with frame (light duty) 455x610 mm

internal dimensions, total weight of cover and frame

19.7.1.1 to be not less than 38 kg (weight of cover 23 kg and

weight of frame 15 kg) : With common burnt clay

F.P.S. (non modular) bricks of class designation 7.5

b 19.7.2 Inside size 120x90 cm and 90 cm deep including

with frame (medium duty) 500 mm internal

diameter, total

weight of cover and frame to be not less than 116

kg (weight of cover 58 kg and weight of frame 58

19.7.2.1 With common burnt clay F.P.S. (non modular) bricks

of class designation 7.5 Each 6 26405.50 158433.00 0.00

48.0 18.8.1.1 Extra over item No. 25.4 for every additional depth

of 0.10 m. or part there of manhole.

a 19.8 Extra for depth for manholes

19.8.1 Size 90x80 cm

19.8.1.1 With common burnt clay F.P.S. (non modular) bricks

of class designation 7.5 metre 4 8825.40 35301.60 0.00

b 19.8.2 Size 120x90 cm

With common burnt clay F.P.S. (non modular) bricks

of class designation 7.5 metre 1 10585.50 10585.50 0.00

49.0 19.2 Providing orange colour safety foot rest of minimum

6 mm thick plastic encapsulated as per IS : 10910

on 12mm dia steel bar conforming to IS : 1786

having minimum cross section as 23 mmx25mm and

over all minimum length 263 mm and width as

165mm with minimum 112 mm space between

protruded legs having 2 mm tread on top surface by

ribbing or chequering besides necessary and

adequate anchoring projections on tail length on

138 mm as per standard drawing and suitable to

with stand the bend test and chemical resistance

test as per specifications and having manufacture's

permanent identification mark to be visible even

after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1

cement : 3 coarse sand : 6 graded stone aggregate

20 mm nominal size) complete as per design. Each 16 553.70 8859.20 0.00

Digitally signed by Rakesh

S. Ref. Description of Item DSR

No. DSR- Rate DSR NSR

50 DSR-19.6 Providing and laying non-pressure NP2 class (light

duty) RCC pipes with collars jointed with stiff

mixture of cement mortar in the proportion of 1:2 (1

cement : 2 fine sand) including testing of joints etc.

complete. (for storm drainage)

b 19.6.3 250 mm dia RCC pipe Metre 0 899.80 0.00 0.00

51 DSR-19.3 Providing and laying cement concrete 1:5:10 (1

cement : 5 coarse sand : 10 graded stone aggregate

40 mm nominal size) up to haunches of RCC. pipes

including bed concrete as per standard design :

52.00 19.21.1 Making connection of drain or sewer line with

existing manhole including breaking into and

making good the walls, floors with cement cincrete

1:2:4 mix (1cement: 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) cement plastered on

both sides with cement mortar 1:3 (1cement : 3

coarse sand) finished with a floating coat of neat

cement and making necessary channels for the drain

etc. complete for pipes 100 to 250mm dia.

4.0 Storm Water Drainage System

53.0 DSR-2.10 Excavating trenches of required width for pipes,

cables, etc including excavation for sockets, and

dressing of sides, ramming of bottoms, depth upto

1.5 m, including getting out the excavated soil, and

then returning the soil as required, in layers not

exceeding 20 cm in depth, including consolidating

each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed,

within a lead of 50 m :

2.0 2.10.2 Pipes, cables etc. exceeding 80 mm dia. but not

exceeding 300 mm dia Metre 45 352.15 15846.75 0.00

54.0 2.11 Extra for excavating trenches for pipes, cables etc.

in all kinds of soil for depth exceeding 1.5 m, but

not exceeding 3 m. (Rate is over corresponding

basic item for depth upto 1.5 metre).

55 DSR-19.3 Providing and laying cement concrete 1:5:10 (1

cement : 5 coarse sand : 10 graded stone aggregate

40 mm nominal size) up to haunches of S.W. pipes

including bed concrete as per standard design :

54.0 DSR-19.6 Providing and laying non-pressure NP2 class (light

duty) R.C.C. pipes with collars jointed with stiff

mixture of cement mortar in the proportion of 1:2 (1

cement : 2 fine sand) including testing of joints etc.

55.00 DSR-19.27 Constructing brick masonry road gully chamber

50x45x60 cm with bricks in cement mortar 1:4 (1

cement : 4 coarse sand) including 500x450 mm pre-

cast R.C.C. horizontal grating with frame complete

as per standard design

19.27.1 With common burnt clay F.P.S. (non modular) bricks

class designation 7.5 Each 3 5957.9 17873.70

Digitally signed by Rakesh

S. Ref. Description of Item DSR

No. DSR- Rate DSR NSR

56.00 19.21.1 Making connection of drain or sewer line with

existing manhole including breaking into and

making good the walls, floors with cement cincrete

1:2:4 mix (1cement: 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) cement plastered on

both sides with cement mortar 1:3 (1cement : 3

coarse sand) finished with a floating coat of neat

cement and making necessary channels for the drain

etc. complete for pipes 100 to 230mm dia.

External Water Supply and Pumps

57 DSR - 18.9 Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply including all CPVC plain & brass

threaded fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement,

trenching, refilling & testing of joints complete as

per direction of Engineer in Charge. (

18.9.4 32 mm nominal outer dia Pipes Metre 25 438.60 10965.00 0.00

58 DSR-18.41 Providing and filling sand of grading zone V or

coarser grade, allround the G.I. pipes in external

b 18.41.4 32 mm nominal outer dia Pipes Metre 25 164.90 4122.50 0.00

59 DSR-18.32 Constructing masonry Chamber 30x30x50 cm

inside, in brick work in cement mortar 1:4 (1

cement :4 coarse sand) for stop cock, with C. I.

surface box 100x100 x75 mm (inside) with hinged

cover fixed in cement concrete slab 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), i/c necessary excavation,

foundation concrete 1:5:10 ( 1 cement : 5 fine sand

: 10 graded stone aggregate 40 mm nominal size )

and inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12mm thick, finished with a

floating coat of neat cement complete as per

standard design :

a 18.32.1 With common burnt clay F.P.S.(non modular) bricks

of class designation 7.5 Each 1 1992.6 1992.60 0.00

60.0 18.17 Providing and fixing gun metal gate valve with C.I.

wheel of approved quality (screwed end) :

a 18.17.2 32 mm nominal bore Each 2 689.6 1379.20

61.0 NS- 12 UG tank Filling Pumps Pump set

Providing, fixing, commissioing and testing package

vertical tank filling pumps, comprising of Electrical

Driven inline pumping with all accessories, Pumps

shall be with C.I. Base, S.S 304, impeller, shaft,

mechanical seal, S.S. Shaft directly coupled to

motor suitable for operation on 400/440 volts, 1

phase 2900 RPM. TEFC electronic motor mounted on

a common channel baseplate 150mm dia pressure

gauge, GM isolation cock and cement concrete

foundation with plaster with dunlop cushy foot

mountings with all accessories such as NRVs,

valves, pressure guage bourden type, common

suction and delivery header, bellows on sucton and

delivery side complete in all repsects. Each - 28508.00 0.00

Including all electrical works

FLOW :upto 1.0 LPS (1 working )

Head : upto 35 mtr

Digitally signed by Rakesh

PROJECT : GUEST HOUSE ROURKELA CLUB

Abstruct of Cost: Electrical

S.NO. Description of items Quantit

Unit y DSR 2022 NSR

RATE AMOUNT RATE AMOUNT

1 INTERNAL WIRING

1.01 Wiring for light point/ fan point/ exhaust fan point/

call bell point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface /

recessed medium class PVC conduit, with modular

switch, modular plate, suitable GI box and

earthing the point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable etc.

1.02 1.11 Wiring for twin control light point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC

conduit, 2 way modular switch, modular plate,

suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required.

1.03 1.55 Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point ( without

independent switch etc.) with 1.5 sq. mm FRLS

PVC insulated copper conductor single core cable

in surface/ recessed PVC conduit, and earthing the

point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required.

1.04 1.14 Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FRLS PVC insulated

copper conductor, single core cable in surface/

recessed medium class PVC conduit as required.

a 1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire mtr 100 208 20800

d 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire mtr 750 391.96 293970

e 1.14.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire mtr 100 508.92 50892

f 1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire mtr 50 897.32 44866

1.05 1.24 Supplying and fixing following modular switch/

socket on the existing modular plate & switch box

including connections but excluding modular plate

etc. as required.

d 1.24.4 3 pin 5/6 A socket outlet each 30 108.92 3267.6

e 1.24.5 6 pin 15/16 A socket outlet each 14 175.89 2462.46

f 1.24.6 Telephone socket outlet each 5 132.14 660.7

g 1.24.8 Bell push each 5 125 625

1.06 1.27 Supplying and fixing following size/ modules, GI

box alongwith modular base & cover plate for

modular switches in recess etc. as required.

1.07 1.57 Supplying & fixing suitable size GI box wih

modular plate and cover in front on surface or in

recess including providing and fixing 25 A modular

socket outlet and 25 A modular SP MCB, "C" curve

including connections, painting etc. as required.

1.08 1.25 Supplying and fixing two module stepped type

electronic fan regulator on the existing modular

plate switch box including connections but

excluding modular plate etc. as required. each 6 329.46 1976.76

1.09 (DSR Providing and fixing circular/ Hexagonal cast iron

Civil- or M.S. sheet box for ceiling fan clamp, of internal

Item no. dia 140 mm, 73 mm height, top lid of 1.5 mm

10.18) thick M.S. sheet with its top surface hacked for

proper bonding, top lid shall be screwed into the

cast iron/ M.S. sheet box by means of 3.3 mm dia

round headed screws, one lock at the corners.

Clamp shall be made of 12 mm dia M.S. bar bent

to shape as per standard drawing.

Digitally signed by Rakesh

S.NO. Description of items Quantit

Unit y DSR 2022 NSR

RATE AMOUNT RATE AMOUNT

1.1 1.21 Supplying and fixing of Following sizes of

PVC conduit along with the accessories like

Junction boxes, bends, socket, fish wire etc. on

surface/recess with M.S. Clamps, nuts and

bolts including cutting of the wall and

making good the same in case of recessed

conduit as required. for LV

1.11 1.18 Supplying and drawing following pair, 0.5 sq.mm.

FR PVC insulated copper conductor, unarmoured

telephone cable in existing surface/ recessed

steel/ PVC conduit as required.

a 1.18.2 2 pair Telephone cable ( 0.5 sq.mm. ) mtr 50 33.92 1696

1.12 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN

Cable in the existing surface/ recessed Steel/ PVC

conduit as required.

2 DISTRIBUTION BOARD

2.01 2.3 Supplying and fixing following way, single pole

and neutral, sheet steel, MCB distribution board,

240 V, on surface/ recess, complete with tinned

copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including

earthing etc. as required. (But without

MCB/RCCB/Isolator)

a 2.3.3 12 way , Double door each 6 2066.96 12401.76

2.02 Supplying and fixing upto following amps rating,

240/415 volts, “C”curve, miniature circuit breaker

suitable for inductive load of following poles in the

existing MCB DB complete with connections,testing

and commissioning etc. as required.

a 2.10.1 6-32 Amp (10KA) SP MCB 'C' Series each 48 228.57 10971.36

2.03 2.14 Supplying and fixing following rating, double pole,

(single phase and neutral), 240 V, residual current

circuit breaker (RCCB), having a sensitivity current

30 mA in the existing MCB DB complete with

connections, testing and commissioning etc. as

2.04 NSR Supplying and fixing upto following amps rating,

240/415 volts, “C”curve, miniature circuit breaker

suitable for inductive load of following poles in the

existing MCB DB complete with connections,testing

and commissioning etc. as required.

a NSR 40A DP MCB each 6 2,589 15535

3 SUPPLY OF LIGHT & FAN FIXTURES

3.01 NSR Supply of lighting fixtures of surface/recessed

mounted 10W LED Round Downlighter luminaire.

The LED source used shall be complying with LM80

standards & LED source efficacy >150 lm/w. Epoxy

white powder coated die cast aluminium housing;

Efficient PMMA front visor;. The system lumen

output of the luminaire of a minimum of 100

lms/W with color temprature of 5700 deg K (ANSI

Bin) and CRI>80. Integral Driver with constant

current constant voltage (CVCC), P.F >0.95,

THD<10% and Surge Protection of atleast 3.5KV. Each 0 1,151 0

3.02 NSR Supply of lighting fixtures of surface/recessed

mounted 12W LED Round Downlighter luminaire.

The LED source used shall be complying with LM80

standards & LED source efficacy >150 lm/w. Epoxy

white powder coated die cast aluminium housing;

Efficient PMMA front visor;. The system lumen

output of the luminaire of a minimum of 100

lms/W with color temprature of 5700 deg K (ANSI

Bin) and CRI>80. Integral Driver with constant

current constant voltage (CVCC), P.F >0.95,

THD<10% and Surge Protection of atleast 3.5KV. Each 16 1,366 21864

Digitally signed by Rakesh

S.NO. Description of items Quantit

Unit y DSR 2022 NSR

RATE AMOUNT RATE AMOUNT

3.03 NSR 20 W linear 4ft LED integrated batten made of

ultra slim co-extruded polycarbonate channel with

housing part in white finish & diffuser part in

reeded opal finish.White finish ABS end caps with

decorative circular coloured polycarbonate cap

snap fitted on the end cap to enhance the

aesthetic of the fixture. These end caps are snap-

fitted to the fixture.High efficiency long life LED

with lumen efficacy of 130 lm/W with viewing

angle of 120º.Powered by an integral isolated low

THD electronic LED driver ( SMPS based constant

current supply) with output short circuit

protection, surge protection.Can be fixed directly

into the wall/ ceiling by means of mounting SS

clips provided with the fixture. Lumen Output of

2110 lumens with System efficacy of >105lm/W

.CRI >80, Color temperature 6500K, THD <20%

and PF>0.95,IP20 . Life class of 35,000 hrs @ L70,

Operating Temperature:-10 TO +45 DEG.C; Input

Supply Voltage Range:140-270 V, Frequency :50-

3.04 NSR Supply of 10W LED BulK head Fitting, The LED

source used shall be complying with LM80

standards & LED source efficacy >120 lm/w. Epoxy

white powder coated die cast aluminium housing;

Efficient PMMA front visor;. The system lumen

output of the luminaire of a minimum of 100

lms/W system efficacy with color temprature of

5700 deg K (ANSI Bin) and CRI>80. Integral

Driver with constant current constant voltage

(CVCC), P.F >0.9, THD<20%,IP65 and Surge

Protection of atleast 5KV. Each 2 1,384 2768

3.05 NSR Supply of 10W Mirror Light Each 5 2,699 13495

3.06 NSR Supply of 18W wall Bracket Light Each 10 2,768 27683

3.07 NSR Supply of Bed lamp light Each 8 2,076 16610

3.08 19.1 Supply, Installation, Testing and Commissioning of

1200 mm sweep, BEE 5 star rated, ceiling fan with

Brush Less Direct Current (BLDC) Motor, class of

insulation: B, 3 nos. blades, 30 cm long down rod,

nos. canopies, shackle kit, safety rope, copper

winding, Power Factor not less than 0.9, Service

Value (CM/M/W) minimum 6.00, Air delivery

minimum 210 Cum/Min , 350 RPM (tolerance as

per IS : 374-2019), THD less than 10%, remote or

electronic regulator unit for speed control and all

remaining accessories including safety pin, nut

bolts, washers, temperature rise=75 degree C

(max.), insulation resistance more than 2 mega

ohm, suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as required.

3.09 NSR Supplying of Heavy Duty Exhaust Fans

4 ERECTION OF LIGHT & FAN FIXTURES

4.01 1.41 Installation, testing and commissioning of pre-

wired,fluorescent fitting / compact fluorescent

fitting/ LED Light fitting of all types,complete with

all accessories and tube/lamp etc. directly on

ceiling/ wall, including connections with 1.5 sq.

mm FRLS PVC insulated, copper conductor, single

core cable and earthing etc.as required. each 46 206 9476

4.02 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the

existing junction box/ wooden block including

connections etc. as required. each 23 87 2001

4.03 1.45 Installation, testing and commissioning of ceiling

fan, including wiring the down rods of standard

length (upto 30 cm) with 1.5 sq.mm FRLS PVC

insulated, copper conductor, single core

cable,including providing and fixing phenolic

laminated sheet cover on the fan box etc. as

FIXING EXHAUST FAN UPTO 450 MM SWEEP

4.04 1.5 Installation, testing and commissioning of exhaust

fan up to 450 mm sweep in the existing

opening,including making the hole to suit the size

of the above fan, making good the damage

complete , connection , etc as required.-M/C

ROOM & PUMP ROOM each 6 450 2700

4.05 1.51 Extra for fixing the louvers/ shutters complete with

frame for a exhaust fan of all sizes. each 6 207 1242

Digitally signed by Rakesh

S.NO. Description of items Quantit

Unit y DSR 2022 NSR

RATE AMOUNT RATE AMOUNT

4.06 1.38 Supplying and fixing call bell/ buzzer suitable for

single phase, 230 V, complete as required. each 5 99 495

5.01 NSR Supply of UL approved low carbon high tensile

steel rod with copper coating of min 254 micron

JK Chemrode - 0110 CBR the dia should be 25

mm with length of 10 feet ( 3000 mm) . The rod

shall be as per IEC 62561-2 and approved by UL

467. The rod shall be tested from NABL lab for

current discharge not less then 46kA peak.

The Chemrode shall be surrounded with 25 kg ( 1

bag) of Earth enhance materiel JK Reslow

according to IEC 62561-7 and the Chemical

resistance value shall not increase more then

0.067 Ωm and same will be tested from NABL lab.

along with earth pit chamber made up polyplastic.

Size of -254x330x260 MM (Model similar to

5.02 6.14 Providing and laying G.I. tape 32 mm X 6 mm

from earth electrode directly in ground as

required. Rmt 20 195 3900

5.03 5.15 Supply and Installation 25 mm x 5mm G.I. strip

on surface or in recess for connection etc as

required. Rmt 50 244 12200

5.04 5.16 Supply and Installation 6 SWG G.I. wire on

surface or in recess for loop earthing as required.

6 Medium Voltage Panel

6.01 Fabrication supply, installing,testing & commission

and connecting with main LT Panel of indoor type

dust and vermin proof hinged and lockable doors

at back side made out of 14 SWG CRCA MS Sheet

including painting and complete with

interconnections, Top entry, cable

glands,removable gland plate, plugs, bonding to

earth with 2 independent earth connections

having 2 nos 25x6mm GI strip at bottom of

panel as earth bus ,the construction of panel

shall be compartmentalised, very compact, easy

in maintenance .provision of ventilation shall be

through axial flow fans system Legend plate of

suitable size of showing panel no. and name of

panel for outgoing feeder and as per the following

and as per drawing for Main Panel

Space of LT 3phase meterwhich shall be sealed by

electrical department.

1 no. 63A FP MCB

1 No. Multifunction Meter Without RS-485 port

1 set C.T's 60/5Amp , CL 1.0, 15VA for meter

1 No A/M Selector switch

1 set Phase Indicating LED Lamps with backup

1 ses ON,OFF indicating LED Lamps with backup

1 no emergency stop push button switch (to

control whole panel)

FP aluminium bus bars of minimum 100 Amp with

heat shrinkable coloured sleeves , Shrouds at

Joints and including DMC/SMC bus bars supports

at required interval complete for cross section,

side supports and their spacing etc. for

withstanding fault level of 31 MVA for 1 sec

2 Nos. 40Amps FP ,MCCB with Thermal Magnetic

Release adjustable with rotary handle for Lift

2 Nos. 40Amps FP ,MCB

8 Nos. 40Amps DP ,MCB

Miscellaneous items

illumination lights with 6 A,10kA MCB

Digitally signed by Rakesh

S.NO. Description of items Quantit

Unit y DSR 2022 NSR

RATE AMOUNT RATE AMOUNT

ILLUMINATION LED WITH HOLDER & DOOR

6" dia exhaust fan with thermostate & suitable

Internal illumination in Cable alleys with Door

operated switch.

complete panel as above set 1 1,32,663 132663

7 LT CABLE AND ACCESSORIES

SUPPLY OF L.T. CABLE

7.01 Supplying of following sizes of 1.1 KV grade

multicore aluminium conductor XLPE insulated

armoured cable conforming to IS:7098 (Part - I)

complete with all amendments etc. as required

7.02 Laying and fixing of one number PVC insulated and

PVCcsheathed / XLPE power cable of 1.1 KV grade

of following size on wall surface as required.

a 7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle)

7.03 Laying and fixing of one number PVC insulated and

PVCcsheathed / XLPE power cable of 1.1 KV grade

of following size on cable tray as required.

a 7.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle)

7.04 Laying of one number PVC insulated and PVC

sheathed / XLPE power cable of 1.1 KV grade of

following size in the existing RCC/ HUME/ METAL

pipe as required.

DSR 9 LT CABLE JOINTING & END TERMINATION

7.05 DSR 9.1 Supplying and Making End Termination With Brass

Compression Gland and Aluminium lugs for

Following Size of PVC Insulated and PVC Sheathed

/ XLPE Aluminium Conductor Cable of 1.1 kV

Grade as Required.

a DSR 4Cx10 sq. mm (25mm)

b DSR 4Cx16 sq. mm (28mm)

8 MISCELLANEOUS ITEMS

8.01 4.1 Hot Dipped Galvanized Iron Cable Tray 4.6

Supplying and installing following size of

perforated Hot Dipped Galvanised Iron cable tray

(Galvanisation thickness not less than 50 microns)

with perforation not more than 17.5%, in

convenient sections, joined with connectors,

suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc.as required

a 4.6.2 150 mm width X 50 mm depth X 1.6 mm

thickness mtr 40 639.28 25571.2

DSR 2 MISCELLANEOUS ITEMS -

8.02 2.21 Providing and fixing M.V. danger notice plate of

200 mm X 150 mm, made of mild steel, at least 2

mm thick, and vitreous enameled white on both

sides, and with inscription in single red colour on

front side as required. each 2 240.17 480.34

8.03 Supplying and laying of following size DWC HDPE

pipe ISI marked along with all accessories like

socket, bend, couplers etc. conforming to IS

14930, Part II complete with fitting and cutting,

jointing etc. in the existing trench, complete as

a 14.15.1 63 mm dia (OD-63 mm & ID-51 mm nominal mtr 50 127.00 6350

b 14.15.2 90 mm dia (OD-90 mm & ID-76 mm nominal) mtr 50 170.00 8500

Digitally signed by Rakesh