Annual maintenance of Sri Prasanna Venkateswara Swamy Temple and Guest house at Thondamandapam in Tirupati District for the year 2026 27

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead Brick Work.

Demolishing and disposal of unserviceable materials within 100 metres lead Unreinforced cement concrete up to 15cm thickness

Conveyance of excavated surplus earth /debris to a distance 2 KMS from the site of work at at a place specified by the engineer in charge including loading and unloading etc., complete as directing during execution.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work Ordinary soil-Manual means upto 3m depth.

Filling of foundations and basement with best river sand in layers of not more than 15cms, thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete

Cement Concrete (1:4:8) using 40 mm (0.54 Cum), 20mm (0.27 Cum) and 12 mm (0.09 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.

Cement Concrete (1:2.5:5) - Grade M15 using 20 mm (0.54 Cum) and 12 mm (0.36Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.

Supply and placing of the M20 Design Mix using of 10mm HBG crushed metal 0.480cu.m,6mm HBG Crushed metal 0.320cu.m,sand 0.400cu.m and cement 350Kg with water cement ratio of 0.53(185.50 ltrs/cu.m of CC) etc., from any source confirming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing centering charges, etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing.

- do - for precast slabs 50 mm thick using 10 mm graded aggregate HBG crushed metal from any source conforming to the relevant ISI standards, with necessary reinforcement excluding cost of steel and tying of grills, centering charges,but including cost of necessary form work etc., complete as directed by the department.

RCC M20 Design mix precast slabs 80 mm thick using 20 mm graded size HBG crushed metal

Providing High Yield Strength deformed (HYSD) / Thermo mechanically treated (TMT) steel bars of Fe 500 / 500D grade (as per IS 1786 - 1979) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire, 2 nos of 20 G binding wire in tandem are to be strictly adhered).

Randum Rubble masonry in Cement mortar (1:6) using granite stones from any source confirming to the relevant ISI standards including cost and conveyance of all materials, curing, packing, neat finishing etc., complete as per specifications (excluding cost of bond stones)

Construction of Brick Masonry in CM(1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick Brick partition walls in CM (1:5) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. Complete

Plastering using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions

In C.M( 1:5) 20mm thick

In C.M( 1:5) 12mm thick

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply and fixing of MS tubes and pipes of all dia diameters as per IS-1161, including cost and conveyance, all incidental charges etc. complete including labour charges for fabricating and labour charges for fixing, including painting the MS tubes with Two coats with synthetic enamel paint in all shades - First quality over a primary coat (Red oxide metal primer) (total three coats) of approved make and colour as directed during execution.

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates, sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Supply of gravel for road works including cost and conveyance of all materials incidental charges etc., Complete

Supply of Quarry rubbish (35a)

Labour charges for Spreading gravel or sand including watering and rolling with hand roller irrespective of thickness in layer complete as directed during execution

Flooring with Antiskid floor tiles Non-skid red or white full body Ceramic floor tiles of size 450 x 450 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work.

Finishing the sides of walls with glazed red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs. approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg /10 sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls). (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Flooring with Plain cement concrete general purpose floor tiles of 25 mm thick conforming to IS:1237 using aggregates, cement, pigments of size 300 X 300 x 25 mm of any shades. confirming to IS 1380-12013/IS 1237-2012 of following sizes set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Flooring with Galaxy granite 18-20 mm thick up to 8'-00 (2.43m) (premium quality) set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the slabs against supply)

Painting with Ready mixed Synthetic Enamel paint in all shades -Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter, approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Single coat for old wood work

Single coat for old iron work

Single coat for old plastered surface

Painting single coat for old work with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

Painting single coat for old work with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Providing Unplasticized PVC SWR Rain water downfall pipes for the 110 mm dia PVC pipe with wooden block of size 150mmx50mmx50mm dia with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

Supplying and fixing in position Flush doors of different sizes with 35 mm thick Flush Door Shutters solid bond wood block board type with commercial ply on both faces of standard make Conforming to IS 2202 solid core flush doors , with Commercial facing both sides with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, Single leaf using Best Indian Country wood (Vepa/Neredu) frames of size 75mmx100mm without threshold plate, including cost of M.S. "Z" Hold fasts of 230 x 50 x 6mm, M.S. Powder coated Butt hinges of 125 x 65 x 2.12mm, screws, nails, etc., complete (excluding cost of other fixtures which will be paid separately but including labour charges for fixing the fixtures).

Providing and fixing precast concrete blocks (interlocking pavers) using not lessthan M40 grade paver blocks and thickness not less than 80 mm for medium traffic areas conforming to IS 15658-2006 of all shapes and designs as per the specification, over sand bed of 20 mm to 40 mm (30 mm average) thickness and compacting with vibrating plate compactor having 3 tonne compaction force there by forcing part of sand underneath to come up in between joints. final compaction of paver surface to be done after spreading and brushing the fine sand into joints to its final level. The work includes cost of all materials such as interlocking pavers, sand etc., Labour and equipments such as cutting machine, lift, loading & unloading to work site clearing, bringing required all materials for the successful completion of work as per drawings and Technical Specification Clause 1504 MORD and as directed during execution by the Engineer-in- charge of the work.

Supply of following labour required for maintenance work such as welding works, stone works, masonry works, carpentory works etc., and other emergency works as and when entrusted by the department during execution.

,-do- Masons 2nd class

,-do- Masons Helpers

,-do- Carpentors 2nd class

,-do- Carpentors Helpers

,-do- Plumbers 2nd class

,-do- Plumbers Helpers

,-do- Welders 2nd class

,-do- Welders Helpers

,-do-Man/ Woman mazdoors

Supplying and Fixing European Water Closet of 1st quality confirming to IS:2556-Part-2-1973 of white glazed with 'P' trap with ISI mark or equivalent approved by the department.

Supplying & Fixing Orissa Pan white glazed W.C of size 580 x 440 mm 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap with ISI mark or equivalent approved by the department.

Supply & fixing of PVC low level system 10 litres capacity Dual Flush with internal components & short bend.

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/Neycer) 550 x 400 mm - Single C.P. Pillar cock 1st quality confirming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso/Senior/Nice or equivalent complete with standard CI brackets including wooden block

Supply of SYMET BIB COCK (CAT.NO:121) Standard 15 mm size as per IS 9763-2000 with ISI mark male thread with deluxe handles,86 mm long and 102 mm high and 43mm breadth 12mm seat dia and replaceable washers,having approx. weight of 90gms.

Supply & fixing the following of PVC /SWR pipes Specials (as per ISI standards) 6kg/cm2 (Type B) 75 mm dia single socket pipe

- do - 75 mm dia single socket pipe

- do - 110 mm dia single socket pipe

- do - 160 mm dia single socket pipe

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

22.20mm ODPipe - SDR 13.5

28.60mm ODPipe - SDR 13.5

34.90 mm ODPipe - SDR 13.5

Writing the sign boards, Direction boards and painting Rangolies over M.S sheet / C.C road etc., with two coats of back ground one coat primary & one coat synthetic enamel paint over the sign boards with printing two coats with synthetic enamel paint over the back ground. The rate includes cost of paint, labour charges, scaffolding etc., required for the work. The paint should be done with first quality synthetic enamel paint of approved colour and make as directed during execution.

Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 4mm foam white sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of 4mm foam sheet vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution .

Supply of machinery in desilting works guide lines for engaging Excavator- Loader (JCB) (Capacity / out put of machine 0.24/1 Cum)

1. The owner should transport the JCB to the work spot at his own costs 2. The Excavator- Loader (JCB) should be able to excavate a minimum of 40 cubic meter of Earth per hour. 3. The Excavator- Loader (JCB) should be able to load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per each tractor. 4. The rate of per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges. 5. The payment of the Excavator- Loader (JCB) should be paid hourly basis subject to the condition 2&3 cited above. 6. The Excavator- Loader (JCB) should have the Tacho metre and it should function properly.

Hire charges for Tractor with ripper attachement as directed during execution

Supply of Mild steel (Powder coated) Butt hinges IS 205 125 mm long

Aluminium Specials

Supply of Aluminium Aldrop (IS:2681) 300 mm long

Supply of Aluminium Aldrop (IS:2681) 200 mm long

Supply of Anodised Alluminium tower bolts 10 mm dia with ISI Mark IS 204 of 10 mm x 250 mm long

Supply of Anodised Alluminium tower bolts 10 mm dia with ISI Mark IS 204 of 10 mm x 200 mm long

Supply of Anodised Alluminium Door handles IS 208 of 12 mm rod with 125 mm long

Supply & fixing towel rod (CP) of 24'' long and 3/4'' dia.

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457.2 mm

Supplying and fixing NP soap dish heavy type with NP SCREWS

Supplying and fixing of BITW coat hanger of size 0.60 x 0.076 x 0.025 m including finishing smooth the teak wood reapers and polishing with two coats of French Polish over Bee waxing of approved quality and fixing the specified (CP or aluminium ) coat hooks of different sizes of required numbers at equal spacing as directed during execution and fixing the coat hangers to the walls including cost and conveyance of all materials like screws, nails etc( excluding cost of hooks and fixing charges).

S & F 19.05 mm heavy duty NP stop cock Indian make with ISI mark 400 grams

Supplying and fixing angle stop cock 12.7mm (1/2") Zoloto / ARK Indian make heavy duty. (400 grms)

Supply and fixing 12.7mm dia NP pillar cock heavy duty 1st quality Indian make.400 Gram Seiko/Senoir

Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames H.D.-10with 560mmdia. clear opening (New item) with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes.

Cleaning of septic tanks through sludge gulper (up to 4000 liters) including the conveyance of sludge gulper, operational charges etc., complete as directed during execution.

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks