24/MWEEE-I/2021-22/TC/02

Amount

Fabrication , Supplying,Installation,testing, Commissioning of 12 mts.high mast System with its accessories ,Mast shaft shall be in one section , hot dip galvanized 4 mm thick (Single dip ) inside & out sides &suitable for wind velocity as per IS 875 part3 .There shall be in longitudinal seam weld per section and No circumfrential weld. It should also included accessories For High Mast head frame ,2 point suspension system with steel wire rope 5mm dia. (7/19construction) single drum winch ,galvanized lantern carriage arrangement suitable for 4/6 Nos.flood light luminaries symmitrically And its control gear system boxes and lighting finial ,the mast shall have integral type manual tool mounted at the base compartment of its raising and lowering operation with foundation bolts and Anchor plate and control panel housing suitable RCC (1:2:4) shallow foundation of size1 1 m(L)X1 m wide and 2 m deep i/c excavation of earth, providing cutting bending and placing in position, reinforcemet of cold twisted bars of 12 mm dia-2100 mm long (approx.)- 16 nos. and reinforcement of cold twisted bar of 8 mm dia-3700 mm (approx.)- 13 nos. (with 150 mm spacing) as reqd. with positioning of foundation bolts and providing DWC HDPE pipe for cable entry & exit as reqd. for the high mast considering. The safe bearing capacity at site as 10 T/sqm at 2 mts. Depth with all material i/c 4 Nos. SPMCB, 63 Amp. DP isolator etc. as reqd. Logo/Name of manufacturer shall be embossed on the pole . Galvanization as per relevant IS.

S.I.T.C. of 150 Watt LED flood light louminiare fitted with lense made of pressure die cast aluminium housing and Toughened glass cover complete with following specifaction as reqd. Total system wattage = 150 watt +- 5 % Lumnairer efficacy >= 100 luman/watt Power Factor>= 0.95 protection Class- IP-66

Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1kv grade of following size above in the existingRCC/Hume/ Stoneware/Metalpipe as required (A) upto 35 sqmm

Laying of one number pvc insulated and PVC sheathed/ XLPE power cable of 1.1kv grade of following size above in the existing masonry open duct as required (A) upto 35 sqmm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. as required. 63mm dia

Supply of XLPE insulated and PVC/XLPE Sheathed AL conductor armoured cable conforming to IS7098 (PART-I)/1976 as required. (A) 3 X6 sqqmm

Earthing with GI earth pipe 4.5Mx40mm dia acessorise and providing masnary enclosure with cover plate having locking arrangement and watering pipe etc, with charcoal or coke and salt complete as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

PRINCE ENTERPRISES

Kamal Electricals

A P R ENTERPRISES