Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹5.3 CrAdmitted-Finance | -33.12% | ₹5.3 Cr | L1 | Admitted-Finance |
| 2 | L2₹6.5 CrAdmitted-Finance | -19.00% | ₹6.5 Cr | L2 | Admitted-Finance |
| 3 | L3₹6.6 CrAdmitted-Finance | -18.02% | ₹6.6 Cr | L3 | Admitted-Finance |
| 4 | L4₹6.8 CrAdmitted-Finance | -15.21% | ₹6.8 Cr | L4 | Admitted-Finance |
Tender Value
₹8.0 Cr
EMD Value
₹16.0 L
Closing Date
30 Mar 2026, 6:00 pmClosed
Executive Engineer
KDA KOTA
SITC of smart decorative light and decorative pole from polytechnic circle to DCM Circle
2026_UITKo_547682_1
39/2025-26 (51)
Open Tender
Electrical Works
270 days
KOTA
Please refer Tender documents.
2 documents required · 2 mandatory
₹7,500
Online Through SSO Portal
₹16.0 L
Yes
9 Apr 2026
20 Mar 2026
1 Apr 2026
20 Mar 2026
30 Mar 2026
20 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1SITC of Decorative Ornamental pole with Double arm bracket with or without Post Top Arm as required by department . Total height of the pole shall be 9000 mm nominal above the ground.The pole is made out of combination of plain mild steel tube with cast iron pedestal in three steps. Part 1 - High-quality MS comprising a bottom section of 139.7 mm dia × 3.6 mm thick × 3000 mm long, Part 2 - Middle section of 114.3 mm dia × 3.6 mm thick × 3000 mm long, Part 3 - Top section and arm of 89 mm dia × 3.6 mm thick × 3000 mm long. Base Plate - 400 × 400 × 16 mm thick base plate. CI Casting Ornamental Base min. length 1000mm, CI part ring - 5 nos.& other aluminium emblishments as per drawing. The Pole section shall be welded by certified welders using high and MIG welding process. A built in lockable service window is provided to accomodate a 6 amp SP MCB and 32 amp heavy duty connector for mains LILO connections in the bottom part of the pole. The decorative pole and double arm bracket shall be machines and polished properly to give it a smooth surface. The decorative pole and double arm bracket is coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethene base paintfor long life complete in all respect. pole will be delivered including required J bolts. A Logo of KDA or any sign given by department is to be embossed on pole by manufacturer .Makes :- Klite, Philips, Bajaj, Homedec , Neri, orient etc and Make is to be approved by department incharge. Quality test report from NABL approved labs / in house NABL approved labs including TPI reports will be submitted by Contractor. | ||||||
| 2SITC of Decorative Ornamental pole with Double arm bracket at two different levels(or same level as required) as per attached drawing . Total height of the pole with Double arm Bracket shall be 8000 mm nominal above the ground. The pole is made out of combination of grooved and plain mild steel tube with cast iron pedestal in three steps .Part1- MS Ribbed pipe bottom part pole Dia:- min. 130 mm, Length:-3000 mm Thickness - min.3 mm. Part 2- MS pipe middle part pole Dia:- min.89 mm, Length:-3000 mm Thickness - min.3 mm. Part 3- MS pipe top part pole Dia:- min. 114 mm, Length:-1000 mm Thickness - min.3 mm. Part 4- MS pipe top arm centre pipe pole Dia:- min. 76 mm, Length:-1000 mm Thickness - min.3 mm. Part 5 - Arm bend pipe Dia:- min. 42 mm, Length:-2000 mm *2 =4000 mm ,Thickness - min.2.8 mm. MS Base plate 400*400*16 mm . CI Casting Ornamental Base min. length 850 mm, CI Part ring -5 nos. & other aluminium emblishments as per drawing. The pole section shall be welded by certified welders using high and MIG welding process . A built in lockable service window is provided to accommodate a 6 amp SP MCB and 32 amp heavy duty connector for mains LILO connections in the bottom part of the pole . The Decorative Pole and Double arm bracket Shall be machined and Polished properly to give it a smooth Surface. The Decorative pole with Double arm bracket is coated with epoxy zinc phosphate primer and finished using envirnmentally stable polyurethene base paint for long life complete in all respect pole will be delivered including required J bolts. Make is to be approved by department incharge .Quality test report from NABL approved labs/ in house NABL approved labs including TPI reports will be submitted by contractor . | ||||||
| 3SITC of LED Decorative Heritage Luminaire 100W without decorative arm , BIS certified with an upper body of spun aluminum (Dia 564mm) in heritage look pattern and a protector, made of UV-resistant Injection Moulded Polycarbonate (PC) with IP66 water & dust ingress protection and IK09 impact protection. The heat sink is made up of high Pressure Die Cast aluminum. Offered with PC Lens and other options in optical distributions providing excellent photometry to optimally cater to all kinds of road, pathway, area illumination applications. Suitable for suspended mounting on decorative Pole arms. Offered with System Lumen Efficacy of 110lms/W at Correlated Color Temperature (CCT) of 3000K to 5700K as required, Color Rendering Index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, System Power 100W, rated voltage 240VAC, Power Factor ≥ 0.95, offered with BIS certified potted DALI/ 0-10V dimmable driver having Internal surge protection of 4kV (in both Common & Differential Modes) and an additional/external Surge Protection Device (SPD) of 10/10kV (in both Common & Differential Modes). The luminaire shall also be compatible with a LoRaWAN based streetlight controller (Non- NEMA) for communication and control compatibility with DCU for smart lighting applications. Makes :- Klite, Philips, Bajaj, Homedec , Neri, orient etc and Make is to be approved by department incharge. Quality test report from NABL approved labs / in house NABL approved labs including TPI reports will be submitted by Contractor. | ||||||
| 4SITC of LED Decorative Heritage Luminaire 50W without decorative arm, BIS certified with an upper body of spun aluminum (Dia 480mm) and a protector, made of injection moulded polycarbonate (PC) clear with IK 07 rating & IP66 protection. The heat sink is made up of high Pressure Die Cast aluminium. Offered with PC Lens and other options in optical distributions providing excellent photometry to optimally cater to all kinds of road, pathway, area illumination applications. Suitable for suspended mounting on decorative bracket. Offered with System Lumen Efficacy of 110 lms/W at Correlated Colour Temperature (CCT) of 3000 Kto 5700K as required , Colour Rendering Index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, System Power 60W, rated voltage 240VAC, Power Factor ≥ 0.95, offered with BIS certified potted driver having Internal surge protection of 4/4kV (in both Common & Differential Modes) and an additional/external Surge Protection Device (SPD) of 10/10kV (in both Common & Differential Modes). The luminaire shall also be connected with a LoRaWAN based streetlight controller (Non-NEMA) for communication and control compatibility with Tata DCU for smart lighting applications. Makes :- Klite, Philips, Bajaj, Homedec ,Neri , orient etc and Make is to be approved by department incharge. Quality test report from NABL approved labs / in house NABL approved labs including TPI reports will be submitted by Contractor. | ||||||
| 5Operation, Maintenance and Security of Decorative LED Light System With Fixtures and Perform Following Work.(i)Maintain power supply (underground and overhead) from kedl/jvvnl energy meter to auto on off pannel to feeder piller to Decorative pole to led light including line fault.(ii) Repair , Rectification, Replacement of defective component of the Existing Led light or entire led light if required so to run led light system(Material like driver, led light will be provided by existing civil contractor who completed the beautification work and has DLP of work.)(iii)Replacement of old led light with new led light if led found broken/damage/stolen. (iv)Replacement of damage or burnt cable/overhead line with new cable/overhead line from from kedl/jvvnl energy meter to auto on off pannel to feeder piller to decorative pole junction box in supervision of engineer. For this work payment shall be extra. (v)Repair of damage cable and overhead line from kedl/jvvnl energy meter to auto on off pannel to feeder piller to decorative pole. (vi)Replacement and repair of damage /burnt /stolen cable , wire or jumper from junction box to decorative light. (vii)Operation maintenance and security of auto on off pannel / CCMS pannel installed by contractor as well as existing old pannel . If any part of pannel found defective/burnt/ stolen/damage contractor have to replace it with new parts and run the led system properly. (viii) Round the clock Bike patrolling by security guard for security of entire decorative light system maintaining by contractor.( 972 led* 36 month =34992 ) | ||||||
| 6Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR | ||||||
| 6.1 | 4 core*10 sqmm | - | mtr. | - | - | BI01010001010000000000000515BI0100001122 |
| 6.2 | 3.5 core*25 sqm | - | mtr. | - | - | BI01010001010000000000000515BI0100001123 |
| 6.3 | 3.5 core*70 sqmm | - | mtr. | - | - | BI01010001010000000000000515BI0100001124 |
| 7Add Extra for Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade direct in ground including excavation of trench of size 75 cm (Depth) x 35 cm(Width) , with procedure as per following points:- (a) Make a river sand bed of height 125 mm along the trench, (b) Lay the cable in the middle of the trench, (c) Provide river sand bed of height 125 mm on top of the cable, (d) Lay the protective Common burnt clay F.P.S. Bricks of Class designation 75 / Sand stone slabs of 50 mm thickness and 225 mm wide just above the sand bed vertically across the cable ( Approx. 9 no. Bricks per Mtr.), (e) Backfill the excavated soil leaving 300 mm from the Ground level, (f)Lay the Cable warning tape and again back-fill the remaining portion of the trench upto the ground level and compacting the earth | ||||||
stage.html
html • 0.03 MB
techsummary_976484.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
Bid_Document_39_51_Dcm_Road.pdf
Tender Documents • 0.51 MB
BOQ_976484.xls
BOQ • 0.46 MB
Download all tender documents and submit your bid