01-AEO/SMP/Repairing of Black Top Road from Chiria More

Page - 88, Item -18, of S.O.R of P.W.(R) NH,2019-20 (0 Corri)Scarifying Existing Bituminous Surface to a depth of 50 mm by Mechanical Means Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material within all lifts and lead upto 1000 metres (Reference to MoRT&H's specification clause 305.4.3).

Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniformthickness, hand packing, rollingwith3wheeledsteel/ vibratory roller 8-10 tonnes in stages toproper grade and camber,applying and brooming requisite type of screening/bindingMaterials tofillup the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404). 9A By Manual Means9A (i) Grading-1(Table 400-9)9A (i)(c)Using Screening (Table 400-10) Type-B (11.2 mm aggregate)

Item No. 9.A(ii)(b).. Page No. 103 of S.O.R of P.W.(R) NH,2019-20 (0 Corri):-Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniformthickness, hand packing, rollingwith3wheeledsteel/ vibratory roller 8-10 tonnes in stages topropergradeandcamber,applying and brooming requisite type of screening/bindingMaterials tofillup the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404). 9A (ii)Grading-2 (Table 400-9) 9A (ii)(b)Using Screening (Table 400-10) Type-B (11.2 mm aggregate)

Item No. 5.1.(A).i).. Page No. 110 of S.O.R of P.W.(R) NH,2019-20 (0 Corri)::Prime Coat:-Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming to IS:8887 on prepared porous granular surface including clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502). i) On WMM/WBM surface @ 0.90kg /sqm. Using cationic SS-1

Item No. 5.2.(A).i).. Page No. 111 of S.O.R of P.W.(R) NH,2019-20 (0 Corri)::Tack Coat:-Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). i) On bituminous surface @ 0.25kg /sqm Using cationic RS-1

Item No. 10.(i).. Page No. 119 of S.O.R of P.W.(R) NH,2019-20 (0 Corri)::Open - Graded Premix Surfacing Providing, laying and rolling of open-gradedpremix surfacingof 20mmthicknesscomposedof13.2 mmto 5.6mmaggregates either using viscosity grade bitumen of approved grade to required line, gradeandlevel toserveaswearing course on a previously prepared base, includingmixinginasuitable plant, laying and rolling with a smoothwheeled tandemor other approved type roller 8-10 tonne capacity, finishedtorequiredlevel and grades (Reference to ORT&H's specification clause 510).10(i) Case-I:Mechanicalmethodusing approvedgrade BitumenandHMP of appropriate capacity not less than 75 tonnes/hour .

Item No. 12.(ii).. Page No. 121 of S.O.R of P.W.(R) NH,2019-20 (0 Corri)::Seal Coat:-Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511)12(ii)Case - II : Type B providing and laying of premixs and seal coat withHMPusingapproved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade.

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.

Add CGST 9%

Add SGST 9%