REPAIR AND MAINT OF CERTAIN CONVENTIONAL LIGHTS CONVERTED INTO LED LIGHT FITTINGS AND FIXTURES, CEILING FANS, EXHAUST FANS, WALL MOUNTED FANS, PEDASTAL FANS AND ALL TYPES OF GEYSERS AND INCL REWINDING AND REPLACEMENT OF MCBs, DBs, SUB MAIN WIRING AND

Amount

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade(MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of and including white/Silver/Dark bronze colour modular blanking plate as per number of switch modules flush mounted for fixing of modular switches,sockets,fan regulators, blank plate etc and including above mentioned colour modular plate cover of required modules and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are to be used of same make/brand only. Cutting & chasing work at any height shall deemed to be included in quoted rate only.)

One light point controlled by one switch.

One fan point controlled by one switch and one regulator.

One exhaust fan point controlled by one switch .

One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

One bell/buzzer point controlled by one bell push.

One light point controlled by two 2 way switches.

All as per item No. 2 above,but point wiring with 2.50 sqmm and earth conductor of size 2.50 sqmm complete all as specified and directed for the following:-

One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board.

All as per item No. 3 above ,but point wiring with 4.00 sqmm and earth conductor of size 4.00 sqmm complete all as specified and directed.

Make for item No 2 to 4 :- (1).PVC Copper conductor cable FRLSH type :-Finolex/Havells/RR Kabel/Plaza

PVC conduit (MMS) & Accessories ISI Marked:- Presto Plast/Finolex/Kalinga Gold/Plaza

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type bell push 6 Amps,1 module, single pole, 240 volts,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fixing red color lighting indication lamp 6 Amps, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

Supply & fixing modular type step fan speed regulator 100/120W, 2 module,230volts,AC, 360 degree rotation 0 to 4 steps, ISI Marked complete all as specified and directed.

Supply and fix call bell AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed.

Make for item No 5 & 13 :- Havells,Cabtree/Roma Anchor/Legrand/Hagar

Supply & fix angle lamp holder, insulated body with back plate for batten fittings including LED lamp 10 watts complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed. Make for item No 14 &15 :- Make of Holder & ceiling rose:- Anchor/Havells/ Legrand, make of LED Bulb:- Philips/CG/Havells

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC casing and caping of size 20 mm, ISI marked or above as required at site with all accessories such as Tee,corner, overlaping connector etc.on walls, roofs and ceilings etc. including concealed MS box factory made of suitable size fabricated out of 1.6mm thick and 50 mm depth, MS sheet suitable for fixing of and including bakelite hylam sheet 3 mm thick fixed flush with wall surface by means of stainless steel cadmium plated screws and cup washers suitable for mounting switches,sockets,fan regulators etc.and including 1.5 Sqmm PVC insulated, multistranded, unsheathed(Green colour),FRLSH type single core copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and directed for the following:-Note:- Accessories such as necessary MS box,screws, cup washers & hylem sheet and including making good etc shall be deemed in to included in quoted rate

One light point controlled by one switch

One fan point controlled by one switch and regulator

One exhaust fan point controlled by one switch.

One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

One bell point controlled by one bell push.

One light point controlled by two 2 way switches.

All as per item No.16 above,but point wiring with 2.5 sqmm and earth conductor of size 1.5 sqmm complete all as specified and directed for the following:-

One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on independent board.

One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on same board.

Make for item No 16 & 17 :- (1).PVC Copper conductor cable :-Finolex/Havells/RR Kabel/Plaza

Supply & fix switch piano, flush type,single pole, 1 way,6 Amps,240Volts,AC ISI marked complete all as specified and directed.

Supply & fix switch piano, flush type,single pole, 2 way,6 Amps,240volts,AC ISI marked complete all as specified and directed.

Supply & fix bell push,flush type, 6 Amps,240 volts,AC ISI marked complete all as specified and directed.

Supply and fix socket out let 2 in 1,5 pin, 6 Amps,240volts,AC ISI marked complete all as specified and directed.

Supply and fix switch socket combination, flush type, 2 in 1,5pin, 6 Amps,240volts,AC, ISI marked complete all as specified and directed.

Supply and fix switch socket combination, flush type, 2 in 1,6pin, 6/16Amps,240 volts,AC ISI marked complete all as specified and directed.

Supply & fix fan regulator piano type electronic, stepped type, 100 Watts,240Volts,AC,ISI marked complete all as specified and directed.

Supply & fix decorative box type 20/22 watt light fitting,blue coloured end caps, pre-wired, and including providing PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. Make for tube light fitting: Hallonix Cat No.HLCB118T8 / Crompton Model No.DMLN1LT8-16/Havells Order code:-REGALBATTENT8UPTO1X22WSSBSWH/ JAQUAR Product code:-LUN101X120XC or equivalent in any approved make.

Supply & fix decorative box type 9 watt light fitting,blue coloured end caps, pre-wired for single LED lamp 9 watt and including PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed. Make:- Crompton Model No.DMLN1LT8-8 / SuryaCat Ref:SUB 118T8 or equivalent model in Philips

Supply & fix LED T-8 tubular lamp 20 watt with extruded aluminium/PC body and PC diffuser complete with inbuilt LED driver complete all as specified and directed. Make: Crompton Model No.LT8-20-865-2 / Havells Code No.PHOTONULTRA1213T8SSTL20WLED865SPC / JAQUAR CAT No.LTBL01X020XC or equivalent model in Philips

Supply & fix LED T-8 tubular lamp 8/9 watt with extruded aluminium/PC body and PC diffuser complete with inbuilt LED driver complete all as specified and directed.Make: Crompton Model No.LT8-8-865-2/Surya Cat Ref :-SLETL-DS 9 PC reform or equivalent in any approved make.

Supply and fix wall mounted decorative type surface mounted 1X6 watts lamp fitting including fixing arrangements at any hight with nuts ,screws and washers and connected to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Crompton cat No.LCSR-06-CD/JAQUAR item code No.LNVE02R006SC /Surya cat No.:- SLE DLS 6W XX Stellar RDor equivalent in any approved make.

Supply and fix recess mounting 2'x2' LED 36/40 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can be suspended with provided kit and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed complete all as specified and directed, Make:- JAQUAR item code No.LSVR01SO36XC / Crompton Cat No.LCPL -36-CD(2x2)/Havells Ordering code:-LHEWBPP6PW036 or equivalent in any approved make.

Supply & fix in repair sheet metal enclosure with metal type AD/DD,415 volts AC,VTPN DB, 8 way+24 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bar and MCCB incomer,FP, and MCB SP /TP as outgoing and complete for IP54 DBs protection and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. Make: Legrand cat No.5077 32 8 way /Hager Cat ref No.VYVO8DL-P / L&T Cat No.DBVTH008GD / Havells cat No.DHDLVDRWAOFO08 or equivalent in any approved make.

Supply & fix in repair sheet metal enclosure with AD/DD 415 volts AC,TPN,DB, 8way,8+24 modules, flush mounting with 100amps copper busbar, 2 neutral/earth bar and MCB incomer,MCB TPN/FP, and MCB SP as outgoing and complete for IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour shade all as specified and as directed. Make: - Legrand cat No.5076 82 8 way / Hager cat ref No.VYH08DH / L&T Cat No.DBTPE004GD, or equivalent in any approved make.

Supply & fix and in repair sheet metal enclosure, AD/DD 240 volts AC,SPN,DB 12 way for flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing and complete for IP 43& IP54 DBs protection and including making good the disturbed surfaces to match with existing surface and colour shade all as specified and as directed. Make:-Legrand cat No.5076 22 12 way(AD)/ Hager cat ref No.VYS12G(AD),L&T Cat ref:-DBSPN008GD or equivalent in any approved make.

Supply & fix in repair sheet metal enclosure,AD/DD 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection and including making good the disturbed surfaces to match with existing surface and colour shade all as specified and as directed. Make:- Legrand cat No.5076 21 8 Way / Hager cat ref No.VYS08G (Acrylic door)/L&T Cat ref:-DBSPN008GD or equivalent in any approved make.

Supply & fix in repair sheet metal enclosure 2 mm thick,AD/DD 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection and including making good the disturbed surfaces to match with existing surface and colour shade all as specified and as directed. Make:- Legrand cat No.5076 20 4Way (AD) / Hager Cat ref No.VYS04G(AD) /L&T Cat ref:-DBSPN004GD or equivalent in any approved make.

Supply & fix in repair MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply & fix in repair MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply & fix and in repair MCB FP 63 Amps 10 KA,"C" series,AC,415Volts,50 Hz,ISI Marked complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

M & L for sub main wiring complete with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade including taking out and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade including taking out and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade including taking out and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Make for item No 39 to 41 :- (1)PVC Copper cable :-Finolex/Havells/RR Kabel/Plaza

(2) PVC conduit(mms) & Accessories :-Presto Plast/Finolex/Kalinga Gold/Plaza

Note for item No 39 to 41 :- Rate for making good the disturbed surfaces to match with existing surface and including colour shade and putty, cutting & chasing work shall be deemed into quoted rate only.

Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts suitable for AC's/Geysers including taking out complete all as specified and directed.Make:- Legrand cat No.5078 11 20A SP,2P+E/ Hager cat ref no.VYA120C / Havells Cat No.DHDPUSN020/L&T Cat No.DBMPS220SD or as approved make

Note:- MCB SP 20Amps will be deemed to be quoted rate

Supply and fix MCCB, 100 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make:- Legrand cat No.4200 15 / Hager cat ref No :-HHA101U / L&T Cat No.CM91712OOKOOG or as approved make

Supply and fix and busbar chamber aluminium of current rating capacity 100 amps,4way,415 volts with necessary fixing arrangements such as hole fastners/screws, bolts,nuts and washers etc and including removing old unserviceable item from existing loaction complete all as specified and as directed Make:- Havells Cat No.:- IHBC010004 or equivalent make in Standard/HPL/L&T/Legrand/Hagar/Indo Asian

Supply and fix busbar chamber aluminium of current rating capacity 200 amps,4way,415 volts with necessary fixing arrangements such as hole fastners/screws, bolts,nuts and washers etc and including removing old unserviceable item from existing loaction complete all as specified and as directed Make:- Havells Cat No.:- IHBC020004 or equivalent make in Standard/HPL/L&T/Legrand/Hagar/Indo Asian

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM reinforced with 8 mm dia TMT bar @ 150 c/c bothways, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Supply and fixing modular switch 1 way,6Amps,1module,240V, ISI Marked and including removing old unserviceable items complete all as specified and directed.

Supply and fix modular switch 1 way,16Amps,1module,240V, ISI Marked and including removing of old unserviceable items complete all as specified and directed.

Supply and fix modular switch 1 way,10Amps,1module,240V, ISI Marked and including removing of old unserviceable items complete all as specified and directed.

Supply and fix modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked and including removing of old unserviceable items Complete all as specified and directed.

Supply and fix modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module with light indication ,240V,AC ISI Marked and including removing of old unserviceable items complete all as specified and directed .

Supply and fix modular switch 2 way,10Amps,1module,240V, ISI Marked and including removing of old unserviceable item complete all as specified and directed.

Supply and fix modular type step fan speed regulator 100/120 W, 2 module,230volts,AC, 360 degree rotation ISI Marked and including removing of old unserviceable item complete all as specified and directed.

Supply and fix modular bell push 1 way,10Amps,1module,240V, ISI Marked and including removing of old unsv item complete all as specified and directed.

Supply and fix call bell AC, 230 Volts single pole, multi music type ISI marked and including removing of old unsv item , complete all as specified and directed.

Make for item No 47 to 55 :- Havells,Cabtree/Roma Anchor/Legrand/Hager/Standard

Supply and fix call bell ding-dong sound type, 230 Volts,50 Hz,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fix call bell buzzer type 240 volts,50Hz,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fix switch piano type, 6 Amps, flush mounted,1 way, 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fix bell push 6 Amps,240 volts, ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fix switch socket outlet 6Amps,5 pin,flush type 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fix switch socket combination 6Amps,5 pin, flush type 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fix switch socket combination 6/16Amps,6pin 240 volts with neon indicator type,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fix switch socket combination 6/16Amps,6pin ,240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fix batten holder /angle holder,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fix fan regulator piano type electronic, stepped type, 100 Watts,240Volts,AC,ISI marked and including removing old unserviceable item complete all as specified and directed.

Make for item No. 56 to 65 :- Anchor/Legrand/Havells/Leader

Supply and fix capacitor 2.5 mfd,240volts, 50Hz complete and including removing of old unserviceable item all as specified and directed.Make : Epcos/Universal/tipcon/CG/Concap/Havells/C&S or as approved make

Supply and fix LED PLL lamp 18 watt, 4 pin typ, 240 Volts,50 Hz,AC,ISI marked to 36 watt PLL lamps and provided necessary fixing suitable holders complete and including removing of old unserviceable items all as specified and directed.Make:- Jaquar cat No.LDZL01X020XC / Crompton Cat No.LPLLA-18-CDL / HALONIX Cat No.HLL-01-18-CW or equivalent approved make.

Taking down carefully ceiling fans at any height of any sweep/make/model after disconnecting electric connection and dismantling and opening the body of ceiling fan and examine for repairs including servicing,overhauling, greasing etc and cleaning the complete body both internal & external parts with cleaning agent and renewal of minor spare parts such as split pins,cater pins,coupling bolt, capacitor holder,terminal adoptor,screws,nuts,spring washers for blade/body etc and replacement of components/accessories such as ball bearings,gun metal bushes,capacitor,canopy top& bottom, shackle clip assembly and assembling of all parts including hanging and fixing back in existing location and connecting of electrical connections and testing for its satisfactory performance complete all as specified and directed. Note:- (i) Spare parts will be measured and paid separately under relevant item of schedule as supply only (ii) Rewinding of fan motor,painting will be measured and paid separetly under relevant item of schedule. (iii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate

All as per item No.68 above,but exhaust fan of PVC/metal body 250mm sweep.

All as per item No.68 above,but exhaust fan of metal body 300mm sweep.

All as per item No.68 above,but exhaust fan of metal body 380mm sweep to 450 mm sweep.

All as per item No.68 above,but Air circulator wall mounted type 450 mm to 600 mm sweep including carrying out repairs to oscillation mechanism/speed regulation mechanism and making functional for satisfactory performance.

All as per item No.68 above,but for wall mounted fan 400 mm sweep including carrying out repairs to oscillation mechanism/speed regulation mechanism and making functional for satisfactory performance.

Supply only capacitor 1.5 mfd,240volts,50Hz complete all as specified and directed. Make : Epcos/Universal/tipcon/CG

Supply only capacitor 2.5 mfd,240volts, 50Hz complete all as specified and directed.Make : Epcos/Universal/tipcon/CG/Concap

Supply only capacitor 3.15 mfd,240volts50Hz complete all as specified and directed.Make : Epcos/Universal/tipcon/CG

Supply only ball bearing Make:- SKF Cat No 6201/6202 or equivalent in NBC/NRB

Supply only ball bearing Make:- SKF Cat No 6203/6204 or equivalent in NBC/NRB

Supply only gun metal bush suitable for ceiling fan/Exhaust fan/Air circulator/wall mounted fan of any sweep/type.

Supply only shackle clip assembly with rubber bush reel and nuts,bolts and washers suitable for ceiling fan of any sweep/type.

Supply only down rod made of MS pipe medium grade 15mm dia of 600mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to down rod with two coats of synthetic enamel paint over one coat of red oxide primer.

Supply only down rod made of MS pipe medium grade 15mm dia of 900 mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to down rod with two coats of synthetic enamel paint over one coat of red oxide primer.

Supply only copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;0.75 sqmm and including electric connection from ceiling fan to ceiling rose complete all as specified and directed Make:-Havells/Finolex/Plaza

Supply only copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ; 2.50 sqmm and including electric connection from electric appliences and ceiling rose/distribution board complete all as specified and directed Make:-Havells/Finolex/Plaza

Supply and fix MS clamp made out of flat iron of size 25X6 mm including galvanised 'S' type hook, nuts, bolts and washers etc suitable for hanging of ceiling fan and painting including one coat of red oxide primer and two coats of synthetic enamel paint and nuts,bolts and washers etc complete all as specified and directed.Make:-Havells/Finolex/Plaza

Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 300 to 450 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5cm apreature MS jali and proper wooden frame for to avoid insects fix at outer surface of wall and making good the disturbed surface area complete all as specified and directed.

Material and labour for painting to ceiling fan complete body, blades & down rod etc of any sweep/make/model with two coats of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation surfaces including marking of MES Number with black paint complete all as specified and directed. Make of paint:-Asian/Berger/Nerolac (Note:-Painting work to be carried out after dismantling of ceiling fan)

Material and labour for painting to exhaust fan complete body, blade assembly,frame etc of 300 mm to 450 mm any sweep /make/model with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces including marking of MES Number with black paint complete all as specified and directed directed. Make of paint:-Asian/Berger/Nerolac (Note:-Painting work to be carried out after dismantling of exhaust fan)

Material and labour for rewinding of ceiling fan motor of 1200 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns as existing,including cleaning the motor properly and applying varnishing heating and assembling of fan motor and rotor fixing back after testing including removing burnt out copper winding wire from ceiling fan motor complete all as specified and directed.

Material and labour for rewinding of ceiling fan motor of 1400 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns as existing,including cleaning the motor properly and applying varnishing heating and assembling of fan motor and rotor fixing back after testing including removing burnt out copper winding wire from ceiling fan motor complete all as specified and directed.

Material and labour for rewinding of exhaust fan motor of 250mm sweep to 300 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns and assembling of fan motor and rotor fixing back and testing including removing burnt out copper winding wire complete all as specified and directed.

Material and labour for rewinding of exhaust fan motor of 380mm sweep to 450 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns and assembling of fan motor and rotor fixing back and testing including removing burnt out copper winding wire complete all as specified and directed.

Material and labour for rewinding of air circulator fan motor 450 mm sweep to 600 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns as existing,including cleaning the motor properly and applying varnishing heating and assembling of fan motor and rotor fixing back after testing including removing burnt out copper winding wire from air circulator fan motor complete all as specified and directed.

Taking down storage type water heater (Geyser) 25 Ltrs capacity of any make/model/type from existing wall after disconnecting of electric and water supply connections and keeping the same in safe custody for carry out repairs/replacement of unserviceable spare parts & components such as heating element, thermostat,pilot lamps with wiring,insulating glass wool, thermal cut out,pressure release valve,safety valve,aperature plate assembly etc and exmine water tightness of inner storage tank after cleaning and renewal of rubber washer/gasket and nut,bolts and washers etc and adjust to required range of thermostat control and assembling all parts/ accessories including fixing back in same location after connecting up of water & electric connections and testing for its satisfatory functioning complete all as specified and directed. Note:- (i) Spares will be measured and paid separately under relevant item of schedule as supply only (ii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate.

All as per item No.94 above, but of capacity 50 litre

Supply only heating element 1.5 KW, suitable for storage type water heater (As per sample) Make:-Hot max/Bajaj/CG/Remson

Supply only heating element of 2.0 KW, suitable for storage type water heater (As per sample) Make:-Hot max/Bajaj/CG

Supply only thermostat suitable for storage type/instant water heater (geyser) of any type/ capacity

Supply only thermal cut out suitable for storage type/instant type water heater (geysers) of any type/ capacity

Supply only aperature plate assembly suitable for storage type water heater (geyser) 25 litre capacity complete all as specified and directed

Supply only aperature plate assembly suitable for storage type water heater (geyser) 50 litre capacity complete all as specified and directed

Supply only copper inner tank suitable for storage type wateer heater (geyser) 25 litre capacity.

Supply only copper inner tank suitable for storage type water heater (geyser) 50 litre capacity.

Supply only geyser indicator pilot lamps(red and green lamps) with wiring round/square/rectangle suitable for geysers of any type

Supply only PVC connection pipe15 mm dia, 450mm long with end nuts and washer, suitable for hot water outlet of geyser

Supply only PVC connection pipe15 mm dia, 600 mm long with end nuts and washer suitable for hot water outlet of geyser complete all as specified and directed.

Supply only PVC connection pipe15 mm dia, 450mm long with end nuts and washer suitable for cold water inlet of geyser complete all as specified and directed.

Supply only PVC connection pipe15 mm dia, 600 mm long with end nuts and washer suitable for cold water inlet of geyser complete all as specified and directed.

S&F bib tap 15 mm dia standard pattern of PTMT white colour high pressure screwed for iron GI pipe/fittings inlcuding removing old unserviceable item complete all as specified and directed(As per sample)

S&F stop valve 15 mm dia, cast copper alloy chromium plated with crutch handle screwed both ends for GI pipe/fittings inlcuding removing old unserviceable item complete all as specified and directed

Material and labour for painting to storage type water heater(Geyser) of capacity 25 litre of any make/type to complete external body with two coats of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces including marking MES Number with black paint complete all as specified and directed directed. Make of paint:-Asian/Berger/Nerolac (Note:-Painting work to be carried out after dismantling of storage type water heater(geyser)

All as per item No 111 above but of capacity 50 litre

Fixing only of LED T-8 tubular lamp 20 watt with extruded aluminium/PC body and PC diffuser complete with inbuilt LED driver and including removing of old unsv item complete all as specified and directed. Note: LED T-8 tubular lamp 20 watt will be issued under Schedule 'B' as free for fixing only.

Testing of geyser which is not in under repair complete checking of safety valve, thermostat, hot water pipe, etc at the site and entire satisfaction of Engr-in-Charge duly maintain a Geyser Testing Register including signature of Engr-in-Charge, JE E/M and Contractor.

CHANDRA CONSTRUCTION & CO.

BARRACKPORE ENTERPRISE

M/S. TAPAS ENTERPRISE

S..S. ELECTRIC CO.

ONIEL SALES

M/S. A.B. Consultant

M/S. ARUP KUMAR DEY