WBPWD/EE/ HED / NIeT-22 (2nd Call) of 2025-26

Laying only Cable upto 70 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core [ F-1,3a]

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting ,[F-1, 2 d ]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 Core 50 Sq. mm [F-5,8b,xvi]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings as per GS. 50 mm dia [F-6,11d)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works 20 mm [E-16,7a]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [E-9,1, v ]

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC [E-9, C1,g1]

4 sq mm [F-5,9,ii]

6 sq mm [F-5,9,iii]

10 sq mm [F-5,9,iv]

16 Sq.mm [F-5,9,v]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17,5.a]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment For 4 Way VTPN ,VERTICAL [D-12,16 ]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection [ Make - Legrand / Schneider/L&T) as per direction of EIC.]. 125 A [D-8, 10]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make-Legrand/ Schneider/Siemens/Crabtree/L&T) as per direction of EIC. ] 6-32 SP [ D- 6, 7 ]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36cmx86.36cmx46cm deep (below Ground level)complete with cemented brick work(1:6) of 25cm width duly plastered with cement morter (inside) CI hinged inspection cover of size36.56 cmx 35.56 cm with locking arrangement,GI reducer including drilling of 46nos. 12 mm dia holes on the GI pipe[3(a)/G-2]

S&F earth busbar of galvanized( hot dip) MS flat 25mm.x6mm. on wall having clearance of 6mm or as per EIC . From wall including provding drilled holes on the busbar complete with GI bolts,nuts,washers etc. as required.[G-2,4.a]

SITC of 2.0 ton capacity Hi-wall mount fixed speed split Air-conditioner machine fitted with tropical Rotary compressors cooling capacity-24000 btu/hr, air flow-800 cfm suitable for Refrigerant-R410A/R32 of rated power supply 230 V-1 Ph- 50 Hz along with all accessories (Make-O-General/Mitsubishi electric or equivalent make as approved by EIC). incl. Supply & fixing required Angle Iron Structure on wall for installation & fixing of ODU as per direction of E.I.C.

Supply & Laying Extra Add-on items- 5/8" (for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation, 4 core x 2.5 sq.mm. copper cable(RR kabel/KEI/FINOLEX) incl. fixing arrangement and wrapping insulation of aerotape complete in all respect for 2 TR A.C. Machine. and Supply & laying PVC Drain Pipe 25mm dia by shaddling on wall incl. PVC "T", elbow, bend etc as per direction of E.I.C

1. THE AGENCY MUST PROCURE THE MATERIALS FROM THE MANUFACTURER/OEM OR FROM THEIR AUTHORIZES. SALES CHANNEL SO THAT THE STANDARD WARRANTY / SUPPORT OF THE MANUFACTURER / OEM BECOMES APPLICABLE TO THE PRODUCTS TO BE DELIVERED AND INSTALLED BY THEM. 2. DOCUMENTS THAT AUTHENTICATES SUCH PROCUREMENT FROM THE MANUFACTURER/OEM OR FROM THEIR AUTHORIZES SALES CHANNEL SO THAT THE STANDARD WARRANTY / SOPPORT SHOULD BE SENT FROM THE e-MALE OF THE MANUFACTURER/OEM / AUTHORIZES SALES CHANNEL TO THE e-MALE OF ENGINEER-IN-CHARGE AND HARD COPY OF IT TO BE SUBMITTED DURING EXECUTION OF WORK/ SUBMISSION OF BILL. 3. IF ANY REFURBISHED MATERIAL IS SIPPLIED ABD INSTALLED, PENAL ACTION WILL BE TAKEN AS PER EXISTING RULES.