REPAIR AND CLEANING TO SEWAGE LINE, MANHOLE, SEPTIC TANKS, DRAINAGE, HARDSTANDING, BOUNDARY WALL, FENCING AND OTHER WORKS AT AF STN SAMANA

Amount

Cleaning of sewage lines 100 to 200 mm dia from manhole to manhole by manual / mechanical rodding, removing all sludge / waste and making the line functional including disposing of all sludge / waste etc outside MD land and refixing properly manhole covers etc complete all as specified and directed by Engineer-In-Charge.

Cleaning of sewage lines 300 mm to 450 mmdia from manhole to manhole by manual / mechanical rodding, removing all sludge / waste and making the line functional including disposing of all sludge / waste etc outside MD land and refixing properly manhole covers etc complete all as specified and directed by Engineer-In-Charge.

Removal of blockage from Indian WC / EWC / floor trap / nahani trap by removing all sludge / waste etc including cleaning of connected pipe up to first manhole to remove blockage, and finally washing with clean water including disposing of all sludge / waste etc outside MD land all as directed by Engineer-in-Charge

Cleaning & desludging of manholes of depth not exc 1.0 meter, of any size & shape by removing all sludge / waste etc from the manholes and finally cleaning with fresh water including disposing of all sludge / waste etc outside MD land.

Cleaning & desludging of manholes of depth exc 1.0 meter but not exc 2 meter, of any size & shape by removing all sludge / waste etc from the manholes and finally cleaning with fresh water including disposing of all sludge / waste etc outside MD land.

Cleaning & desludging of manholes/Septic tank of depth exc 2.0 metre but not exc 5.0 meter, of any size & shape by removing all sludge / waste etc from the manholes and finally cleaning with fresh water including disposing of all sludge / waste etc outside MD land.

Dismantling and breaking up 150 to 450 mm dia (salt glazed ware, AC or Reinforced concrete) set in cement mortar, including PCC packing under hunching against the sides of bed and compelte PCC of bed all as specified

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/dense soil all as specified and directed

Excavation in trenches exc 1.50 mtr but n.exc 3.00 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 3 m in depth and getting out in hard/dense soil all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated soil n exc. 1.5km and depositing where directed at a level n exc. 1.5 m above the starting point

S&F 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars.

S&F 200mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars.

S&F 300mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars.

S&F 450mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars.

M&L for Cement Concrete 1:4:8 type D2 (using 40mm graded aggregate ) Concrete bed to drain pipes 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in.

M&L for Cement Concrete 1:4:8 type D2 (using 40mm graded aggregate ) Concrete bed to drain pipes 200 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in.

M&L for Cement Concrete 1:4:8 type D2 (using 40mm graded aggregate ) Concrete bed to drain pipes 300 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in.

M&L for Cement Concrete 1:4:8 type D2 (using 40mm graded aggregate ) Concrete bed to drain pipes 450 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in.

Demolition of ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar including all quoins, pillars, arches etc. all as specified and as directed.

M&L for providing precast cement concrete (1:5:8) (using 20mm graded stone aggregate) block masonary solid building blocks exc. 10 cm , in width and setting in CM 1:6 complete in wall or pillars or kerbstone all as specified and directed.

Taking down cement or cement lime plaster on brick / stone / precast concrete walls etc. including raking out joints, hacking for key, scrubbing down with water etc, all as specified and as directed.

M&L for Rendering 15 mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement.

M&L for Rendering 15 mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement.

M&L for prepartion of new surfaces plastered or un plastered wall/ceiling and applying two coats of oil bound distemper complete all as specified and directed

M&L for preparation of new plastered surfaces of wall incl pilasters / cornices etc and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489 : 2004 : Alkali & fungal resistant, dirt resistant, exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 Liters/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Litre / 10 Sqm.

M&L for Preparation of old distempered / decorated surfaces of ceiling incl washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of Distemper oil emulsion complete as specified and directed.

M&L for Preparation of old distempered / decorated surfaces of walls incl washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of Distemper oil emulsion complete as specified and directed.

M & L for preparing old decorated wall surfaces, plastered or unplastered and applying one coat of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives all as per manufacturer's instructions, as specified and as directed. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L for prepration of old painted steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint etc. all as specified and as directed by Engineer-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)

M&L for preparation of old painted wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.

Demolition of cement concrete(unreinforced) in ground floor and pavings not exc 15cm thickness below or above ground level, all as specified and as directed.

M&L for Cement Concrete Type D2 1:4:8 (using 40 mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for providing cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, coping and the like including weathering, sightly rounded or chamfered angles and thoating, as directed. NOTE : - (a) The rates include for use of form work (Straight or curved). (b) Concrete items, if so indicated, shall be reinforced. Reinforcement shall be measured separately.

M & L for Hardcore of Broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick cement concrete type B-2,1:2:4 (20 mm graded aggregate) as in floor / hard standing,etc complete all as specified & directed.

M&L for 75 mm thick cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection etc complete all as directed by Engr-in-charge.

Demolition of Reinforced Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer in Charge

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified & directed.

M&L for Reinforced Cement Concrete type B-1, 1:2:4 (20 mm graded aggregates) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, culvert, cover slabs (for man holes/drain etc.) and similar articles with plain faces including any type of formwork /moulds etc complete all as specified and directed by Engg-in-charge.

M&L for Reinforced Cement Concrete type B-1, 1:2:4 (20 mm graded aggregates) as chajja, fins, lintels and similar articles with plain faces including any type of formwork /mould etc all as specified and directed by Engg-in-charge. Note:- Quoted rate deemed to carryout wk at height upto 8.00 m &

M&L for TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

Disconnecting existing tank of capacity exc 250 ltrs but n exc 500 ltrs setting aside or lowering if required for cleaning and reconnecting or refixing in same position or other position, including cleaning and removing all scale and dirt etc from tanks and from the mouths of circulating pipes etc all complete and all as specified .

Disconnecting existing tank of capacity exc 500 ltrs but n exc 1000 ltrs setting aside or lowering if required for cleaning and reconnecting or refixing in same position or other position, including cleaning and removing all scale and dirt etc from tanks and from the mouths of circulating pipes etc all complete and all as specified .

Dismantling and disconnecting of existing cast iron or reinforced concrete drain pipes of internal dia 75/100 mm, jointed in cement mortar , fixed to wall,laid in trenches complete all as specified and directed.

S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed

S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F in repairs 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engineer-in-Charge

S & F in repairs 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes provided with access door complete all as specified and directed by Engineer-in-Charge

S & F in repairs 75 mm bore of pipe PVC (SWR) branch piece, single (single Y) equal or unequal fixed to PVC pipes with access door complete all as specified and directed by Engineer-in-Charge

S & F in repairs 75 mm bore of pipe PVC (SWR) branch piece, double (double Y) equal or unequal fixed to PVC pipes with access door complete all as specified and directed by Engineer-in-Charge

S & F in repairs 75 mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal fixed to PVC pipes with access door complete all as specified and directed by Engineer-in-Charge

S & F in repairs 75 mm dia of PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) pipes 110mm, dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed

S&F PVC (SWR) pipes 110mm, dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F in repairs 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engineer-in-Charge

S & F in repairs 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes provided with access door complete all as specified and directed by Engineer-in-Charge

S & F in repairs 110 mm bore of pipe PVC (SWR) branch piece, single (single Y) equal or unequal fixed to PVC pipes with access door complete all as specified and directed by Engineer-in-Charge

S & F in repairs 110 mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal fixed to PVC pipes with access door complete all as specified and directed by Engineer-in-Charge

S & F in repairs 110 mm bore of pipe PVC vent cowl fixed to PVC pipes complete all as specified and directed by Engineer-in-Charge

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Supplying and laying of CPVC pipes,20 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Supplying and laying of CPVC pipes,32 mm outer, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Dismantling water tanks of capacity exc 250 ltr and n.exc 500 ltr and removing to store complete all as specified and directed.

S&F 500 ltrs capacity triple layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed

Dismantling water tanks of capacity exc 500 ltr and n.exc 1000 ltr and removing to store complete all as spd and directed

S&F 1000 ltrs capacity triple layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed

S&F in repairs 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F in repair Gun-metal, globe or gate valves,bore dia 25mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair cover lid for 300/500/1000 ltr polythene water storage tank as required complete all as specified and directed.

S&F in replacement 1mm thick of laths Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type

S&F in repairs Ball bearing for steel rolling shutters complete.

S&F in repairs Safety lever locks(push pull or manual type) mild steel with 4 levers for steel rolling shutters complete:

S&F in repairs Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc including taking out embedded portion and making good disturbed ground

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out hard/dense soil, returning, refilling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil removing surplus soil to a distance n exc 50 m complete all as specified and directed.

S & F angle iron / flat iron as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L for Mild steel round bars 10mm dia and over Fe-410-W(Gde.E.-250)Part 1 quality A or Fe 290 (Gde-E-165), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

S & F Mild steel screw bolts (machine made) of neck diameter 10 mm & 40mm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed

Dismantling fencing wire mesh,any type

Supply only chain link fencing, any size or type including line wires, galvanised mild steel to any type of standards, rails, straining bolts etc complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed

M&L preparation of new or previously untreated steel and iron surfaces of any description n exc 10 cm width or when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S & F framed work as in doors or gates of angle, channel, hollow section or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe-410- W(Gde-E-250) quality-A complete

S&F in repairs galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt .including .securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pins etc. as directed (each line wire to be measured )

Supply and fix in repair mild steel galvanised punched type concertina coil of loop dia 1050 mm (dia of coil when up stretched) fixed to existing angle post strut and tying at three places ie two bottom & one at top with 3.15 mm dia galvanised mild steel wire all as specified and directed by Engineer in Charge. Note:- The punched type concertina coil shall be stretched to maintain the dia of up stretched coil as 1050 mm and number of circles as 52 per coil and shall cover 8 running metre per coil.

Dismantling of plain or corrugated steel sheeting any gauge, thickness,including Nainital or similar pattern roof coverings from roof coverings etc complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F Plates (Plain or chequered) channels,squarecut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to FE-410-W( Gde-E-250 )quality -A complete all as specified and directed Engineer-in-Charge

S&F for joist,channel, angles or tees with web and flanges cut to shape drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates, riveting etc. n.exc 10 kg each brackets conforming to FE-290 Gde-E-165 ) complete all as specified and directed by Engineer-in-Charge

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Supply & Fix 06 mm thick plain, multicavity poly carbonate sheet (coloured) in roof covering, fixed with and including aluminium fillets at joints and aluminium angles at the end, fixed with self drilled screws and standard fittings, fixtures and accessories in repair complete all as specified and as per manufacturer's instructions.

Removing old worn out (unserviceable) HDPE bags / gunny bags from stacks filled with sand etc and supply & placing in position new HDPE bags / gunny bags inner laminated layer standard quality, wt. of bag shall not be less than 90 Grams per bag and filled with locally available sand / soil (Approx. Qty – 1.20 Cuft. in each bags) including tying properly & stacking neatly, placing the bag at different heights etc. complete all as specified and as directed.

M&L for filling of wooden saw dust mixed with clean dry fine sand (mixed in the ratio of 1:1 by volume) and filling / spreading where directed at a level upto 8 meters above from the ground level and leveling in the required shape / slope all as directed. Note:- Measurement shall be carried out for net finished volume of work.

Dismantling Stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar or laid dry and pointed including removal of debries from the premise complete all as spd and directed.

M&L for Rubber moulded chequered cement concrete tile with white cement and pigment (of approved tint) of size 30 cm x 30 cm x 25 mm thick over and including 15 mm thick screed bed in cement Mortar 1:6, set, jointed and pointed in neat cement slurry complete.

M&L for outdoor coloured vitrified paving tiles, joint free (edge cut) of size 300 mm x 300 mm x 8 to 10 mm thick as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

Dismantling Stone slabs and tiles of any description or thickness in floors,aprons etc laid dry or laid dry and pointed including removal of debries from the premise complete all as spd and directed.

Material & Labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 20 mm thick sand screed bed complete.

Material & Labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment laid over and including 20 mm thick sand screed bed complete.

M&L for Forming construction/dummy/expansion joints 30mm deep x 10mm wide filled with sealing compound Grade B etc complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs two way reflective road studs (Cat eye) of dimensions 100mmx 100mm x 25 mm of impact resistance ABS body with red / yellow / white reflective panels and fixing the same on road surface by applying approximately 50 gm Epoxy mixture and placing the cat eye without applying exessive pressure and additional fixed with 10 mm dia and 75 mm long zinc plated steel nail at the centre of cat eye complete all as specified and directed by Engineer-in-Charge. (Make:- Dark eye/ 3M/ Greenlite or equivalant as approved by GE)

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Jagdamba Engineering

Pooja Enterprise

Krishna Bhoomi Enterprise

Indice Technologies

M/s SK Traders

jitendra c joisar

Nirmal Construction