Construction of Govt. Senior Secondary School Building Chalwara Tehsil Jawali Distt Kangra HP

Amount

Excavation in foundation trenches etcetera in earth work in all type of classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil, including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the excavated soil clear from the edge of excavation within all leads, as directed by Engineer-in- charge and then returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge, within all leads, and lifts disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts and other incidental charges. The rate is includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper blasting work, hard blasting work including chiseling or wedging out rocks where blasting is prohibited and doing work in saturated soil including cost of shoring, strutting and pumping or bailing out water (surface and sub soil water) upto any depth and any quantum of water including clearing of slush which may arise during dewatering including dressing of sides and bed and disposing of all excavated earth upto any leads and lifts, disposed earth to be levelled and neatly dressed as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Filling in plinth with sand under floors including watering , ramming, consolidating and dressing complete as per HPPWD specifications or as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, Toll tax sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/ depths heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like, upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, Toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/ depths heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Foundation footings, basis of columns etcetera and mass concrete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/ depths heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Flat surfaces such as soffits of suspended floors, roofs landings shelves and the like floor etcetera upto any thickness upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/ depths heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Beams, cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels upto any heights/ depths/ thickness upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/ depths, heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Columns Pillars posts and struts, (Square rectangular or polygonal in plan) in any heights/ thickness upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/ depths heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Stair cases with sloping or stepped soffits excluding landings upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/ depths heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Edges of slabs and breaks in floors and walls upto any width, upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded/ crushed stone aggregate 40mm (Forty milimetres) nominal size) mixed mechanically and curing complete excluding the cost of form work in foundation and plinth in all depths, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Boulder filling tightly hand packed with hard stone under floor including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregates 20mm (Twenty millimeters) nominal size) mix designed to obtain the minimum compresive strength of grade M-20 (M-twenty) with cement contents not less than 320kg (Three hundred twenty kilogram) per cubic metre and curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in Foundation, footing, bases of columns and the like and mass concrete including pumping or bailing out water and removal of slush if any and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregates 20mm (Twenty millimeters) nominal size) mix designed to obtain the minimum compresive strength of grade M-20 (M-twenty) with cement contents not less than 320kg (Three hundred twenty kilogram)per cubic metre and curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/ thickness upto all floor level,including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregates 20mm (Twenty millimeters) nominal size) mix designed to obtain the minimum compresive strength of grade M-20 (M-twenty) with cement contents not less than 320kg (Three hundred twenty kilogram) and curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts for all floors heights, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregates 20mm (Twenty millimeters) nominal size) mix designed to obtain the minimum compresive strength of grade M-20 (M-twenty) with cement contents not less than 320kg (Three hundred twenty kilogram) per cubic metre and curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregates 20mm (Twenty millimeters) nominal size) mix designed to obtain the minimum compresive strength of grade M-20 (M-twenty) with cement contents not less than 320kg (Three hundred twenty kilogram) per cubic metre to give smooth and even surfaces including centering and shuttering etcetera but excluding the cost of reinforcement in moudlings as in cernices windows sills etcetera in all girth, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregates 20mm (Twenty millimeters) nominal size) mix designed to obtain the minimum compresive strength of grade M-20 (M-twenty) with cement contents not less than 320kg (Three hundred twenty kilogram) per cubic metre including curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in wall (any thickness) but not less than 0.10 metre (Zero point one zero metre) thickness) including attached pillasters buttresses, plinth and string courses etcetera from top of foundation upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth upto all heights/ depths including pumping or bailing out water/dewatering and including racking out joints with cement mortor 1:6 (One cement : six sand) and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, toll tax, sale tax, GST, malkana and all other taxes as imposed by the Government.

Random rubble masonry/ polygonal rubble masonry (uncoursed)/ brought to courses) coursed with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : six sand : twelve graded crushed/ broken stone aggregate 20mm (Twenty milimetre) nominal size) at plinth level in cement mortar 1:6 (One cement : six sand) and curing complete, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying Mild steel/ tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all heights including cost of binding wires complete and other incidentals due for its completion and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying damp proof course 100mm (One hundred milimetres) thick with cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 12.5mm (Twelve point five milimetres) nominal size) and curing complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 (Eighty/ one hundred) or equivalent) using 1.70 kg (One point seven zero kilogrammes) per Square Metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, , including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Half brick work using second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:4 (One cement : four sand) with hoop iron as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Brick work using second class common burnt clay building bricks in super structure above plinth level upto all heights/ floor level in cement mortar 1:6 (One cement : six sand) and curing complete, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing mild steel channel frame for doors, windows and ventilators, manufactured from mild steel channel section ISLC-75 (Seventy five) mild steel channel section 75x40mmx4mm (Seventy five into forty milimetres into four milimetres) ) and M.S. (Mild Steel) flat 75x4mm (Seventy five into four milimetres) in combination welded together to make one frame as per design and drawing including hinges, jamb, lock jamb, beeds, and if required angle thrashold of mild steel angle 50x25mm (Fifty into twenty five milimetres) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jamb including steel butt hinges 2.5mm (Two point five milimetres) thick with a provision of locking arrangement and shock absorber as specified and including applying a coat of approved steel primer after pretreatment of the metal surfaces complete as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Factory made double steel shutter window side hung (one glazed and other wire gauge) of standard rolled steel section joints mitred welded with 16x3.15mm (Sixteen into three point one five milimetres) lugs 10cm (ten centimetres) long embedded in cement concrete 1:3:6 (One cement : three sand : six graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) , or with wooden/ steel plugs and screws or rawal plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings including providing and fixing of glass panes 4mm (four milimetres) thick with glazing clips and speciial metalsash putty of approved make for glazed shutter and metal beading with screws including fixing of wire gauge using galvanised M.S. wire gauge of IS gauge designation 85g (Eighty five -G) with metal beading complete including applying priming coat of red lead paint including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing (single Rebate) angle iron door, windows, clerestory window frame manufactured from mild steel angle iron section of 35x35x4mm (Thirty five into thirty five into four milmetres) including hinges jamb, lock jamb beed and if required angle thrashold of mild steel angle 50x25mm (fifty into twenty five milimetres) welded or rigdly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five milimetres) thick with provision for locking arrangement and shock obserber as specified and applying a coat of approved steel priper after pretreatment of the surface as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax,toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing (double Rebate) angle iron door, windows, clerestory window frame manufactured from mild steel angle iron section of 35x35x4mm (Thirty five into thirty five into four milmetres) welded with M.S. flat 50x4mm (Fifty into four milimetres) including hinges jamb, lock jamb beed and if required angle thrashold of mild steel angle 50x25mm (fifty into twenty five milimetres) welded or rigdly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five milimetres) thick with provision for locking arrangement and shock obserber as specified and applying a coat of approved steel priper after pretreatment of the surface as directed by the Engineer-in-Charge, including carriage of materials within all leads,lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing to existing door frame 30mm (thirty milimetres) thick factory made PVC panelled door shutter consisting of frame made out of mild steel tube of 19 (nineteen) gauge thickness and size of 19x19mm (Nineteen into nineteen milimetres) for styles and 15x15mm (Fifteen into fifteen milimetres) for top and bottom rails, mild steel frame shall have a coat of steel primer of approved make and manufacture, mild steel frame covered with 5mm (Five milimetres) thick heat moulded PVC “C” channel of size 30mm (Thirty milimetres) thickness 70mm (Seventy milimetres) width out of which 50mm (Fifty milimetres) shall be flat and 20mm (Twenty milimetres) shall be tapered in 45 (forty five) degree angle on either side forming style and 5mm (five milimetres) thick 95mm (Ninety five milimetres) wide, PVC sheet out of which 75mm (Seventy five milimetres) shall be flat and 20mm (Twenty milimetres) shall be tapered in 45 (Forty five ) degree on the inner side to form top and bottom rails and 115mm (One hundred fifteen milimetres) wide PVC sheet out of which 75mm (Seventy five milimetres) shall be flat and 20mm (Twenty milimetres) shall be tapered on both sides to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten milimetres) thick 20mm (Twenty milimetres) wide cross PVC sheet be provided as gap insert for top rail and bottom rail penelling of 5mm (five milimetres) thick both sides, PVC sheet to be fitted in the mild steel frame welded/sealed to the style and rails, joints, mitred and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with mild steel butt hinges 100x50x1.90mm (One hundred into fifty into one point nine zero milimetres) size with necessary screws etcetera complete of RAJSHRI or its equivalent (code No.9.120) as specified and as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, toll tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing M.S. (Mild steel) plain grills of required pattern in structural steel/ wooden frames of windows etcetera with M.S. flats, 20x5mm (Twenty into five milimetres) and 8mm (eight milimetres) solid square bar in combination including bolts and nuts or screws including welding with frames complete in all respect including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 35mm (Thirty five milimetres) thick factory made I.S.I. marked flush door shutters No.IS:2202 both side commercial i.e. non decorative phenol bonded termite resistant and water proof core of block board construction with frame of Ist class hard wood and well matched commercial three ply of Century/ALPRO/DURO ply / Kit Ply veneering with vertical grains or cross bands and face veneering on both faces of shutters including black enamelled mild steel butt hinges with necessary screws complete as specified as per the directions of the Engineer-in-Charge including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST, toll tax malkana and all other taxes as imposed by the Government.

Providing and fixing Glazing with glass panes of 5mm (five milimetres) thick plain glass weight not less than 13.75 kg. (Thirteen point seven five kilogram) of Modiguard/ for fixed shutters with putty and nails complete, as per specification, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Glazing with frosted glass panes of 4mm (four milimetres) thick of Modiguard/ Sant/Gobain for shutters with screws and nails complete and as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 40x3mm (forty into three milimetres) flat iron hold fast 40cm (forty centimetres) long including fixing to frame with 10mm (ten milimetres) diameter bolts and nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (Thirty into ten nto fifteen centimetres) 1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty milimetres) nominal size, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 19mm (Ninteen millimetres) thick water proof Termite resistant commercial board of Uniply/ Green ply/Century ply/Kit ply /Duro ply / Marino (ISI Marked ) for cup board shutters including 19 mm (Ninteen milimetres) thick shelves and back side of the cub board shall be of 8 mm (eght milimetres) thick ply and all cut portions of shutter shall have 6mm /8 mm (six milimetres obleque eight milimetres) thick hard wood edging .The shutter from out side shall to be finished with 1mm (One milimetres) thick lamination of Century / Greenlam / Action Tesa / Merinolam of approved shade including fixing Top PTMT handles 125mm (One hundred twenty five milimetres) long shall be provided in wood colour including fixing with nickel plated piano hinges with screws etcetera; and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing brass magnetic catcher for cup board with necessary screws etcetera complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra complete (Indian make of approved quality), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax malkana and all other taxes as imposed by the Government.

Providing and fixing 25mm (Twenty five milimetres) diameter chromium plated Stainless steel curtain rod having wall thickness of 1.25mm (One point two fve milimetres) with two chromium plated Stainless steel brackets fixed with C.P. brass screws and PVC sleeves etcetera, wherever necessary, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 300x16mm (Three hundred into sixteen milimetres) anodized aluminum sliding door bolts anodized Transparent or dyed to required colour and shade with bolts and nuts necessary screws etcetera complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 250x10mm ( Two hundred fifty into ten milimetres) anodized aluminum Tower bolts(Barrel type) anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etcetera complete including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150x10mm (One hundred fifty into ten milimetres) M.S. (Mild steel) Tower bolts(Barrel type) with bolts and nuts necessary screws etcetera, complete including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetres) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) M.S. (Mild steel) handles with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 250mm (two hundred fifty milimetres) size oxidized M.S. (Mild steel) hooks and eyes complete in all respect as per the directions of the Engineer-in-Charge, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Aluminum oxidized Hydraulical door closer complete, as per the directions of the Engineer-in-Charge, including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) bright finished brass floor door stopper with rubber cushion and necessary screws etcetera to suit shutter thickness complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying automatic hydraulically compressed and polished precast terrazzo tiles of size 30x30cm (Thirty into thirty centimeters) and 20mm (Twenty millimetres) thick of I.S.I. marked No. I.S. 1237 in 50% white and 50% grey cement inwhite yellow and moorum chips of O.B. and 2B sizes of NTC or its equivalent laid in floors, treads of steps and landing on a bed of 25mm (Twenty five milimetres) average thickness of cement mortar 1:6 (One cement : six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with the tiles of silver grey shade upto all floors level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 300x300x20mm (Three hundred into three hundred into twenty milimetres) automatic Hydraulically compressed and polished terrazzo tiles of I.S.I. marked No.I.S. 1237 In 50% white and 50% Grey cement in white, yellow and maroon chips of O.B. and 2 B sizes of NTC or its equivalent shade in skirting and risers of steps and dado upto any height on 10mm (ten milimetres) thick cement plaster 1:3 (one cement : three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) upto all floor level including rubbing and polishing complete with tiles of Silver Grey shade and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying Antiskid Ceramic tiles 5.5mm (five point five milimetres) thick of premium quality of Nitco/ Kajaria/ Somany/Bell/AGL/ swastika of 300x300mm (three hundred into three hundred milimetres) size in flooring, treads of steps laid on a bed of 12mm (twelve milimetres) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement upto all floor levels, as specified as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 300X200 mm (Three hundred into two hundred milimetres) white Glazed tiles of Nitco / Kajaria / Orient Bell /Johnson in skirting risers of steps and dados on 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per approved drawing , design and specifications, as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 20mm (Twenty milimetres) thick white Makrana marble in grey streaks with semi rounded nosing in flooring (Work Top Of Kitchen / Pantry) as per pattern laid over 20mm (Twenty millimetre) thick base of cement mortar 1:3 (One cement : three sand) including jointed with cement mortar 1:2 (one cement : two marble dust) with an admixture of pigment to match the shade of marble complete, as per approved drawing , design and specifications and as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

40 mm (Forty milimetres) thick cement concrete flooring 1:2:4 One cement : two sand : four graded stone aggregate 20 mm (Twenty milimetres) nominal size) laid in one layer finished with a floating coat of neat cement, as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 22mm (Twenty two milimetres) thick cement concrete chequered tiles laid in floors treads of steps and landing on bed of 25 mm (Twenty five milimetres) thick cement mortar 1:6 (One cement : six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required), including rubbing and polishing complete shade with hiles silver grey as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 40mm (forty milimetres) wide and 4mm (four milimetres) thick glass strips in joints of flooring, as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 50mm (Fifty milmetres) diameter M.S hollow pipe handrail slip resistant in ramp at two level 75cm (seventy five centimetres) and 90cm (ninety centimetres) height with rounded and welded with 25mm (twenty five milimetres) diametre M.S hollow pipe balusters embedded in cement concrete at the rate of 60cm (sixty centimetres) centre to centre and jointed with electrical gas welding at top alongwith hand rail of hollow M.S. pipe of 50mm diametre. It should extend 30cm (thirty centimetres) beyond top and bottom of the ramp as per approved drawing , design and specifications, as per the direction of the Engineer-in-Charge, including priming coat of red lead paint after pretreatment of the surface and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing railing for stair case having baluster of mild steel square bars 20x20mm (Twenty into Twenty milimetres) and 12x12mm (twelve into twelve milimetres) size in combination with mild steel flat 50x5mm (fifty into five milimetres) with a clear height of 85cm (Eighty five centimeter) at required spacing embedded in reinforced cement concrete steps and welded with electric welding at top alongwith hand rail of hollow M.S. rectangular pipe of 75x25cm (Seventy five into Twenty five centimetre) (SWG-14) . The vertical balusters shoulded be welded / jointed with each other with 2 (Two) Numbers. M.S. flats of 50x5mm (Fifty into five milimetres) complete as per design and drawing including applying coat of red lead paint as per specification and direction of Engineer-in-Charge, and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing factory made ridges or hips having proper gola shape 60 cm (sixty centimetres) overall with 0.60 mm (zero point six zero milimetres) thick ISI marked Z-120(Z- one hundred twenty) prepainted steel sheets of Tata / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns (twenty mcrons) over 5 microns (five microns) primer coating + back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetres) diameter and prepainted G.I. limpet and bitumen washers complete as per approved drawing , design and specifications, and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Valley 60cm (sixty centimetre) overall with 0.60mm (zero point six zero milimetre) thick ISI marked Z-120 (Z-one hundred twenty) prepainted steel sheet of Tata/Sail/Reliance/Jindal steel in roofing with hot dipped, metallic zinc coated steel sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted galvanized iron J or L hooks, bolts and nuts 6mm (six milimetres) diameter with prepainted galvanized iron limpet and bitumen washers filled with required shade of colour and laid complete within all accessories as required upto any height as per approved drawing, design and specification and as per the directions of the Engineer-in-Charge, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 0.60mm (zero decimal six zero milimeter) thick ISI marked Z-120 (Z-one hundred twenty) prepainted steel sheet Tata//Jindal / Reliiance/ SAIL in roofing wih hot dipped matalic zinc coated sheet with top coat of regular modified polyster steel (RMP) organic coating of 20 (Twenty) micron over 5 (five) microns primer coating to back coat of polyster of 5 five ) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetre) diameter with prepainted limpet and rubber washers complete with all accessories as required as per drawing, design, specification and as per the direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals . The rate including, octroi, royality, malkana, sale tax, toll tax, GST or any other taxes as imposed by the Government.

Providing and fixing 0.63mm (Zero point six three milimetres) thick plain galvanised iron sheet 30cm (thirty centimeters) wide 30cm (thirty centimetres) deep plain G.I. (Galvanised iron) sheet gutter having dones shape grating with iron brackets 40x3mm (Forty into three milimetre) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe complete as per design and drawing and specification, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing M,S.(mild steel) BP (Back plain) sheet 1.66mm (One point six six milimetres) to 2mm ( two milimetre) thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per approved design, drawing and specification, as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured and paid separately), including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing flushing 38cm (thirty eight centimetre) overall with 0.60mm (zero point six zero milimetre) thick prepainted sheet with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetre) diameter and prepainted G.I.(galvinsed iron) limpet and bitumen washers complete bent to shape and fixed in walls with cement mortar 1:3 (one cement : isto three sand) as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing on wall face110mm (One hundred ten milimetres) diameter P.V.C. (D-Plast) rain water pipes of working pressure not less than 4.50 kg (Four point five zero kilogrammes) per square metre of finolex/ Relpipe(Reliance)/ Vectus including filling the joints with approved adhesive and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing PVC plain bend 110mm (One hundred ten milimetres) diameter on wall face of finolex/ Relpipe(Reliance) /Vectus for rain water pipes including filling the joints with approved adhesive complete, as per design and drawing and specification, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing PVC Shoe 110mm (One hundred ten milimetres) diameter on wall face of finolex/ Relpipe (Reliance)/Vectus for rain water pipes including filling the joints with approved adhesive complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana, GST and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) PVC clamps ISI marked of approved design with steel screws and rawl plugs etcetera complete, as per approved drawing, design or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetres) PVC clamps ISI marked of approved design with steel screws and rawl plugs etcetera complete, as per approved drawing, design or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing aluminum composite panel (ACP) ceiling 600x600x15mm (Six hundred into six hundred into fifteen milimetres) including prepainted G.I. (galvanised iron) channel framing at the rate of 600mm (six hundred milimetres) centre to centre complete as per approved drawing , design and specifications, or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Steel work welded in built up sections, trusses and framed work composed of beams joists, channels, angles, tees, flats and connecting plates or angle cleats etcetera as in trusses and trussed purlins, main and cross beams, hip and jack rafters purlins connected to common rafters and the like in building including cutting fixing, lifting hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HP:PWD. Specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.In trusses and trussed purlins in buildings.

Painting two or more coats (excluding priming coat) on new steel and other metal surface under coat with enamel paint other than white of approved shade, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire bruushes fine steel wool scrapers and sand paper complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Applying priming coat of Narolac/ Asian made over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of Narolac/ Asian made to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete with enamel paint other than white and carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

6mm (Six millimetrs) thick cement plaster to ceiling with cement mortar 1:3 (One cement : three sand) for all floors level and curing complete including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement : six sand) in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level, including arrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6(One cement : sixsand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:5 (One cement : five sand) in single coat on fair side of brick/ concrete/ stone walls for exterior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 240x120 cm (Two hundred forty into one hundred twenty centimetres) prelaminated phenal bonded with suede finish Black board having 12mm (twelve milimetres) thick green chalk board (non megnetic) with superior quality framing and square clamps fixed with the help of nylon sleves and screws as per site requirments . The board shall be fixed on the wall with specially designed j clamps. Blackboard shall have backing material of galvanized sheet 28mm (Twenty eight milimetres). thick with top green surface for smooth writing with chalk over 11 mm (Eleven milimetres) thick particle board. The board surface shall be non porus ceramic particles on the specially anodized aluminium Profile 20x15mm (Twenty into fifteen milimetres) with corners of black plastic. including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar droppings, dirt, dust, loose materials and other foreign matters and sand papered smooth to give final matter finish to the surface complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on un-decorated walls surfaces (Two or more coats) to give an even shade after thoroughly brushing the surfaces to remove all dirt, dust and remains of loose powdered materials, as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Distempering (two or more coats) with oil bound washable distemper of (Nerolac/Asian paint) approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth, priming coat with distemper primer, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Distempering (two or more coats)with dry distemper of (Nerolac/ Assian paints) of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matters including papering the surface even and sand papered smooth including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax,toll tax, malkana and all other taxes as imposed by the Government.

Painting two or more coats(excluding priming coat) on new concrete /masonry/ asbestos cement/plastered surfaces with synthetic enamel paint of approved brand manufacture brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required etcetera including carriage of materials within all leads, lifts and other incidentals. as per approved drawing, design or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Wall painting ( two or more coatc) with Acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/ stone/ plastered walls surfaces to give an even shade including thoroughly brushing the surfacesfree from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing factory made PVC door frame single rebate of any colours of size 50x47mm (fifty into forty seven milimetres) with a wall thickness of 5mm (five milimetres) made out of extruded 5mm (five milimetres) rigid PVC foam sheet heat bend and mitred at corners and jointed with 2 Nos.(Two Numbers) of 150mm (One hundred fifty milimetres) long brackets of 15mmx15mm (Fifteen milimetres into fifteen milimetres) M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm (Ninteen milimetres into ninteen milimetres) M.S. (Mild steel) square tube of 19 gauge (Ninteen gauge) EPDM rubber gasket weather seal to be provided throughout the frame including fixing of door frame to wall with M.S. screws 100mm (One hundred milimetres) long with wooden or rawl plugs embedded in masonry complete as per manufactures specification and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing Plinth protection with 40 mm (forty milimetres) thick heavy duty precast cement concrete interlocking paver blocks vibre compacted upto M-50 (M-fifty) grade including border or kurb block grey or coloured of NTC with 23 cm (Twenty three centimetres) dia. Half round stone ware pipe for drainage purpose over sub base of cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (forty milimetres) nominal size), bedding for pipe as per Architectural drawing ,design and specifications, as per HPPWD specifications or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregates 20mm (Twenty millimeters) nominal size) mixed designed to obtain the minimum compressive strength of grade M-20 (M-Twenty) and curing complete excluding the cost of form work in foundation and plinth in all depths, includng pumping or bailing out water if any including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (One cement : three sand : six graded stone aggregate 40mm (Forty milimetres) nominal size) and curing complete excluding the cost of form work, in foundation and plinth in all depths including pumping or bailing out water/ dewatering and removal of slush as required at site complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge and carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 60mm (sixty milimetres) thick heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 (M-Fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (Twenty five milimetres) thick average thickness of cement mortar 1:4 (One cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete, as per HPPWD specifications or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and Fixing decorative screen in corridor / verandah manufactured from19x19mm (Ninteen milimetres into ninteen milimetres) hollow square pipes welded with mild steel hollow section of size 50x50mm (Fifty milimetres into fifty milimetres) supported on brackets made of 25x3mm (Twenty five into three milimetres) Mild steel flat frame covered with M.S black Sheet as per architectural drawing , design and specifications, as per HPPWD specifications or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing to wall ceiling and floor polyethylene Aluminum polyethylene (PE-AL-PE) composite pressure pipesU.V. stabalized with carbon black and fitting of kitec confirming to ISI 15450-2004 for water supply complete with necessary fittings including cutting fixing and making good the walls ceiling and floor upto all floor level , as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.1620 (20mm (Twenty milimetres) outer diameter).

Providing and fixing to wall ceiling and floor polyethylene Aluminum polyethylene (PE-AL-PE) composite pressure pipesU.V. stabalized with carbon black and fitting of kitec confirming to ISI 15450-2004 for water supply complete with necessary fittings including cutting fixing and making good the walls, ceiling and floor upto all floor level , as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.2025 (25mm (Twenty five milimetres) outer diameter).

Making connections of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetres to forty milimetres) nominal bore by providing and fixing tee including cutting and threading the pipes complete, and carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (one hundred ten milimetres) diameter ISI marked high pressure P.V.C. spigot and socket, waste and ventilating pipes including fixing with approved adhesive etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (one hundred ten milimetres) diameter ISI marked high pressure P.V.C. spigot and socket, waste and ventilating pipes including fixing with approved adhesive etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) nominal bore/diameter P.V.C. Heal rest bend of Supreme/Kitec/ Finolex/ Reliema Astral Confirming to IS No.14735-99 including fixing with approved adhesive, and carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetre) nominal bore/diameter P.V.C. Heal Rest bend of Supreme/Kitec/ Finolex/ Reliema Astral Confirming to IS No.14735-99 including fixing with approved adhesive, and carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundredten milimetres) nominal bore/diameter P.V.C. plain bend of Supreme/Kitec/Vectus/ Finolix Astral Confirming to IS No.14735-99 including fixing with approved adhesive, and including carriage of materialwithin all leads, lifts, other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetres) nominal bore/diameter P.V.C. plain bend of Supreme/Kitec/Vectus/ Finolix Astral Confirming to IS No.14735-99 including fixing with approved adhesive, and carriage of materialwithin all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) nominal bore/diameter ISI marked PVC collar of Supreme/Kitec/Vectus/ Finolix Astral complete including fixing with approved adhesive as per HP:PWD. specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) nominal bore/diameter ISI marked PVC collar of Supreme/Kitec/Vectus/ Finolix Astral complete upto all floor level including fixing with approved adhesive as per HP:PWD. specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (one hundred ten milimetres) nominal diameter ISI marked P.V.C. cowl, including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetres) nominal diameter ISI marked P.V.C. cowl, including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 110x90mm (one hundred ten into ninety milimetres) P.V.C. floor trap of self cleaning design complete including fixing with approved adhesive, cost of cutting and making good the walls and floors etcetera complete and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 110x75mm (one hundred ten into seventy five milimetres) P.V.C. floor trap of self cleaning design complete including fixing with approved adhesive, cost of cutting and making good the walls and floors etcetera complete and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110 mm (One hundred ten milimetres) diameter PVC P or S trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and P.V.C. pipe with approved adhesive etcetera complete and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Orrissa pattern vitreous China wash down, water closet squatting pan (Indian type W.C pan) ISI marked IS NO. 2556 of size 580mmx450mm (five hundred eighty milimetres into four hundred fifty milimetres) of Hindware /Cera /Jaquar of star white shade/ snow white (Earth work, bed concrete,foot rest and trap to be measured and paid for separately) as per Architectural drawing ,design and specifications, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Anglo Indian (Universal closet) Vitreous china wash down water closet of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimetres) (Europen type W.C. pan) ISI marked No.2556 of HIND WARE/ CERA MAKE with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) (seat and cover to be measured and paid for separately), and carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing high density polyethylene / poly propylene 10 litres (Ten litres) capacity (Dual flush) European standard control low level flushing cistern (Sleek Plus) of Hindware/cera/Jaquar of star white / snow white shade with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (Fifteen milimetres) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet,outlet and over flow pipe, 40mm (Forty milimetres) diameter C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) as per Architectural drawing ,design and specifications, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing G.I. (galvanised iron) inlet connection pipe for flush pipe with W.C. pan, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing solid type white plastic seat and cover for wash down water closet of Hindware /Cera with C.P. brass hinges and rubber buffers including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing flat back Vitreous china wash basin in white shade ISI marked No.2556 of HIND WARE/CERA MAKE of size 550x400mm (Five hundred fifty into four hundred milimetres) without pedestal with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding the cost of fittings, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Hind ware/ Cera make snow white shade flat back vitreous china bowl pattern Urinal No. 60002 of size 59x37.5x39cm (Fifty nine into thirty seven point five into thirty nine centimetres) auto flush cistern including connection the urinal with waste pipe by means of white lead mixed with chopped hamp (waste pipe to be measured and paid for separtely) as specified as per the directions of the Engineer-in-Charge upto all floor level, including carriage of material within all leads, lifts and other incidentals charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing stainless steel kitchen sink ISI marked IS No.2556 of Diamond / Unik , big size 610x460x200mm (six hundred ten into four hundred sixty into two hundred millimeters) of approved make with drain board and C.P waste with C.I or M.S brackets painted white including cutting holes in walls and making good the same complete as per Architectural drawing ,design and specifications, including carriage of material within all leads, lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) diameter rubber plug for sink or wash basin, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 32mm (Thirty two milimetres) diameter M.I. Union for wash basin or sink complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked Mixer for Kitchen sink with casted swinging spout at top complete as per direction of the Engineer-in-Charge, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) diameter CP Brass waste pipe for wash basin or sink, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing two hole basin mixing Faucet, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) diameter chromium plated grating of superior quality for floor, gully or Nahni trap complete, including carriage of materialwithin all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying (to level or slopes) 150mm (One hundred fifty milimetre) internal/diameter PVC pipes grade 'A' of Supreme/Kitec and jointing with approved adhesive including testing of pipes and jointing complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600mmx450mm (Six hundred millimetres into four hundred fifty millimetre) Bevelled edge mirror of superior glass mounted on 6mm (Six milimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers, complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600mmx20mm (Six hundred milimetres into twenty milimetre) C.P. brass towel rail of Jal/ESS complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing plastic liquid soap container with C.P. brass lid and bracket fixed to wooden plugs with C.P. brass screws, complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing chromium plated brass toilet paper holder of approved brand and manufacture of Jal/ESS ESS complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing C.P. Jet spray make of Jal/ESS ESS with 1.00 Metre (One Metre) tube complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) diameters C.P. brass bib tap with capstan head of OPAL PRIME (Single Lever) series of Jaquar/Fluid (Single Lever) series of Hindware/Ruby (Single Lever) series of Cera/or Oran (Single Lever) series of Kerovit ISI marked of approved quality (superior or heavy type) and colour of prayag polynets syonet complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diameter charomium plated CP brass stop cock of OPAL PRIME (Single Lever) series of Jaquar/Fluid (Single Lever) series of Hindware/Ruby (Single Lever) series of Cera/or Oran (Single Lever) series of Kerovit complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) diameters C.P. brass Pillar tap with capstan head of OPAL PRIME (Single Lever) series of Jaquar/Fluid (Single Lever) series of Hindware/Ruby (Single Lever) series of Cera/or Oran (Single Lever) series of Kerovit complete, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen milimetre) female thread PTMT push cock of approved quality and colour complete, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (fifteen millmeters) C.P. brass angle valve of OPAL PRIME (Single Lever) series of Jaquar/Fluid (Single Lever) series of Hindware/Ruby (Single Lever) series of Cera/or Oran (Single Lever) series of Kerovit without nuts and pipes, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore brass full way valve with wheel of Jaquar/Cera/ Hindware complete, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore brass ball valve (Horizontal plunger type) High Pressure with polythene plastic floats of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindson series of Jal, including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 45cm (Forty five centimetres) long and 15mm (Fifteen milimetres) nominal bore PVC connections pipe with brass unions, complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters PVC waste pipe for wash basin or sink including brass check nut complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diameter P.V.C. single equal branch of Supreme/Finolex/Prince with oval acess door, insertion rubber washer 3mm (Three milimetres) thick bolts and nuts ISI marked including fixing with approved adhesive etcetera complete , including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (Seventy five milimetre) diameter P.V.C. single equal branch of Supreme/Finolex/Prince with oval acess door, insertion rubber washer 3mm (Three milimetres) thick bolts and nuts ISI marked including fixing with approved adhesive etcetera complete , including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diameter P.V.C. double equal branch of Supreme/Finolex/Prince with oval acess door, insertion rubber washer 3mm (Three milimetres) thick bolts and nuts ISI marked including fixing with approved adhesive etcetera copmplete , including carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetre) diameter P.V.C. double equal branch of Supreme/Finolex/Prince with oval acess door, insertion rubber washer 3mm (Three milimetres) thick bolts and nuts ISI marked including fixing with approved adhesive extra complete and carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diameter PVC door bend of supreme / Finolex/ Prince with oval access door insertion rubber washer 3 mm (Three milimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete, and carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetres) diameter PVC door bend of supreme / Finolex/ Prince with oval access door, insertion rubber washer 3 mm (Three milimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete,and carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diameter PVC offset 45° (Forty five degree) ISI marked of supreme / Finolex/ Prince including fixing with approved adhesive etcetera complete and carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetres) diameter PVC offset 45° (Forty five degree) ISI marked of supreme / Finolex/ Prince including fixing with approved adhesive etcetera complete, and carriage of material, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and placing three layered PVC water storage tank (SINTEX) of 1000 litres (One thousand litres) capacity complete in all respect with necessary fittings and mosquito proof coupling of approved design 15mm (Fifteen milimetres) nominal bore ball valve with polythene float overflow pipe, scour pipe and PVC cover with locking arrangement including providing pads of size as required including hoisting upto any height, and carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (Forty milimetres) nominal size) bedding for P.V.C./ stone ware pipes of 150mm (one hundred fifty milimetres) internal diameter with necessary form work and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:3:6 (One cement : three sand : six graded crushed stone aggregate 40mm (Forty millimete) nominal size) in haunching of PVC/ stoneware pipes of 150mm (One hundred fifty milimetre) internal diameters, including concrete for bedding necessary form work and curing complete, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing vitreous China pedestal of Hindware/Cera/Jaquar for wash basin complete recessed at the back for the reception of pipes and fittings, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600x120mm (six hundred into one hundred twenty milimetre) glass self with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws, complete including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing (Vitreous China) Tooth brush and Tumbler holder, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Constructing manhole with R.C.C. (reinforced cement concrete) top slab in cement concrete 1:2:4 (One cement : two sand :four graded stone aggregate 20mm (Twenty milimetre) nominal size) mix foundation concrete 1:4:8 (One cement : four sand :eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing (a) inside size 800x800mm (eight hundred into eight hundred milimetre) and 500mm (Five hundred milimetres) deep including C.I. cover with frame (light duty single seal pattern-1) 455x610mm (Four hundred fifty five into six hundred ten milimetre) internal diamension the total weight of cover and frame to be not less than 38kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15 kg (Fifteen kilogram) with 200mm (Two hundred milimetre) thick wall of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement : three sand), including carriage of material within all leads, lifts, and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Constructing manhole with R.C.C. (reinforced cement concrete) top slab in cement concrete 1:2:4 (One cement : two sand :four graded stone aggregate 20mm (Twenty milimetre) nominal size) mix foundation concrete 1:4:8 (One cement : four sand :eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One cement three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing (a) inside size 800x800mm (eight hundred into eight hundred milimetre) and upto any depth including C.I. cover with frame (light duty single seal pattern-1) 455x610mm (Four hundred fifty five into six hundred ten milimetre) internal diamension the total weight of cover and frame to be not less than 38kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15 kg (Fifteen kilogram) with 200mm (Two hundred milimetre) thick wall of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement : three sand), including carriage of material within all leads, lifts, and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Constructing brick masonry chamber for under ground cast iron inspection chamber and bends with second class common burnt clay building, bricks in cement mortar 1:5 (One cement : five sand) cast iron cover with frame (light duty) 355mmx610mm (three hundred fifty five milimetre into six hundred ten milimetre) internal dimensions total weight of cover with frame to be not less than 38 kgs (Thirty eight kilogram) (weight of frame 15 kgs. (Fifteen kilogram) and weight of cover 23 kgs. (Twenty three kilogram) with reinforcement cement concrete top slab 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty milimetre) nominal size) foundation concrete 1:5:10 (One cement : five sand : ten graded stone aggregate 40mm (Forty milimetre) nominal size) in side plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One cement : three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete. In side dimensions 455mmx610mmx450mm (Four hundred fifty five milimetre into six hundred ten milimetre into four hundred fifty milimetre) deep single pipe line complete as per the direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing composite end seal compression fittngs as per IS-15450-2004 for cold water supply e.g. tees, elbow, reducers, connectors, couplers and clamps etcetera of Kitee/supreme with jointing testing and fittings complete including cutting and making good the walls etcetera, including carriage of materialwithin all leads and lifts. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Equal tee (1620) (One thousand six hundred twenty)

Equal tee (2025) (Two thousand twenty five )

Female elbow (1620x15mm thread) (One thousand six hundred twenty into fifteen milimetre) thread

Female elbow (1620x20mm thread) (One thousand six hundred twenty into twenty milimetre) thread

Female elbow (2025x25mm thread) (Two thousand twenty five into twenty five milimetre) thread

Female branch tee (1620x1620x20mm thread ((One thousand six hundred twenty into one thousand six hundred twenty into twenty milimetres) thread

Female branch tee (2025x2025x25mm (Two thousand twenty five into two thousand twenty five into twenty five milimetres) thread

Male thread connector (1620x15mm thread (One thousand six hundred twenty into fifteen milimetres) thread

Male thread connector (2025x25mm thread (Two thousand twenty five into twenty five milimetres) thread

Reducing Tee 1620x all branches (One thousand six hundred twenty into all branches)

Reducing Tee 2025x all branches (two thousand twenty five into all branches)

Coupler 1620 (One thousand six hundred twenty)

Coupler 2025 (Two thousand twenty five)

Reducer 1620x1216 (One thousand six hundred twenty into one thousand two hundred sixteen)

Reducer 2025x1216 (Two thousand twenty five into one thousand two hundred sixteen)

Reducer 2025x1620 (Two thousand twenty five into one thousand six hundred twenty)

Providing and fixing composite end seal compression fittngs as per IS-15450-2004 for Hot water supply e.g. tees, elbow, reducers, connectors, couplers and clamps etcetera of Kitee/Kisan with jointing testing and fittings complete including cutting and making good the walls etcetera, including carriage of materialwithin all leads and lifts. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Equal tee 1620 (One thousand six hundred twenty)

Equal tee 2025 (Two thousand twenty five) )

Female elbow (1620x15mm thread) (One thousand six hundred twenty into fifteen milimetre) thread

Female elbow (1620x20mm thread) (One thousand six hundred twenty into twenty milimetre) thread

Female elbow 2025x25mm thread (Two thousand twenty five into twenty five milimetre) thread

Female branch tee (1620x1620x20mm thread ((One thousand six hundred twenty into one thousand six hundred twenty into twenty milimetre) thread

Female branch tee (2025x2025x25mm thread (Two thousand twenty five into two thousand twenty five into twenty five milimetre) thread

Male thread connector (1620x15mm thread (One thousand six hundred twenty into fifteen milimetre) thread

Male thread connector (2025x25mm thread (Two thousand twenty five into twenty five milimetre) thread

Reducing Tee 1620x all branches one thousand six hundred twenty into all branches)

Reducing Tee 2025x all branches (two thousand twenty five into all branches)

Coupler 1620 (One thousand six hundred twenty)

Coupler 2025 (Two thousand twenty five)

Reducer 1620x1216 (One thousand six hundred twenty into one thousand two hundred sixteen)

Reducer 2025x1216 (Two thousand twenty five into one thousand two hundred sixteen)

Reducer 2025x1620 (Two thousand twenty five into one thousand six hundred twenty)

Providing and fixing Hind ware/ cera make vitreous china Division plate for urinals of size 600x300mm (six hundred into three hundred milimetre) of white shade with necessary screws complete, as specified, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 40mm (Forty milimetres) diameter chromium plated grab bar complete, as specified, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PTMT Urinal spreader of approved quality and colour complete, as specified, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying in trenches 20mm (Twenty milimetres) diameter galvanised mild steel tube, medium grade complete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and fiixing to wall, ceiling and floor 15mm (Fifteen milimetres) nominal bore, galvanised mild steel tube, medium grade complete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Applying cement slurry on reinforced cement concrete slab or cement concrete work using 2.75 kg (two point seven five kilogram) of cement per square metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surface complete including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Brick work using second class common burnt clay building bricks in super structure above plinth level upto all height/ floor level in cement mortar 1:4 (One cement : four sand) and curing complete, including carriage of material within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

20mm (Twenty milimetres) cement plaster in two coat backing coat 10mm (Ten milimetres) and finishing coat 10mm (ten miimetres) thick on fair side of brick/ stone masonry walls for interior plastering upto floor all level including internal rounded angle chamfers and rounded angle in cement mortar 1:4 (One cement : four sand), including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST, malkana and all other taxes as imposed by the Government.

Supplying and filling 40mm (Forty milimetres) Broken/Crushed stone/Brick Bats of Hard stone, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST, malkana and all other taxes as imposed by the Government.

Supplying and fixing cast iron cover with rectangle frame 445 x 610 mm (Four hundred forty five into six hundred ten milimetres) (light duty) single seal pattern of the weight of cover and frame to be not less than 38kg (Thirty eight kilogram) weight of over and weight of frame 15kg (fifteen kilogram) including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, Toll tax, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing water pump 1.00 HP ((One Horse power) of Kirlaskar/ Cromption as per HP:PWD. specifications and as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing and laying 15mm (fifteen milimetres) diameter in trenches, galvanised mild steel tube, medium grade complete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Providing 200mm (Two hundred milimetres) wide cast iron rungs with chequered or ripped non slip surface including fixing in mane holes with 200x200x100mm (Two hundred into two hundred into one hundred milimetres) in cement concrete 1:3:6 (One cement : three sand : six graded crushed stone aggregate 20mm (Twenty milimetres) nominal size), including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, Toll tax, malkana and all other taxes as imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth upto all heights/ depths in cement mortar 1:6 (one cement : six sand), including carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, toll tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:3 (One cement : three sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

sourav mahajan