Construction of chain link fencing along mechanical machine yard at Drass

Amount

Earth Work in excavation by manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms lift upto 1.5mtr including getting out of the excavated soil and disposal of surplus excavated soil as directed within lead of 50 mtrs

All kind of soil @ 60%

Soft rock@ 40%

P/L in position cement concrete of specified grade excluding cost of centering and shuttering . All work upto plinth level 1:4:8 (1 cement:4coarse sand:8 graded stone aggregate 40mm nominal size)

P/L position cement concrete of specified grade excluding the cost of centering and shuttering.all work upto plinth level 1:3:6 (1cement:3concrete:6 graded stone aggregate 40mm nominal size )

Reinforced cement concrete work in walls (any thickness) including attached plaster,butteress,plinth and string course,fillets columns,pillars,piers,abutments,posts and struts etc.above plinth level excluding cost of centering and shuttering ,finishing and reinforcement (1:1.5:3)(1cement 1.5 coarse sand: 3graded stone aggregate 20mm nominal size ) crushed

Providing and fixing G.I chain link fabric fencing of required witdth in mesh size 50x50mm including strengthening with 2mm dia wire and nuts,bolts and washers required complete as per direction of engineer at site made of G.I wire of dia 4mm

Frame Work

Providing and fixing of angle iron (50mmx50mmx6mm) including carriage and necessary fixture @8 c/c Providing and fixing Y shape angle iron posts by cutting,bending,welding 50x50x6mm angles (4.5kg/m) @8 c/c Providing and fixing flat iron 50x6mm (2,36 kg/m) (Horizontal) /Vertical

Providing and fixing of barbed wire fencing on each side of Y shaped angle

Providing and fixing of concertina coil fencing with punched tape concertina coil 600mm dia 10mtr openable length(total length 90mtr) having 50 No rounds per 6mtr length upto 3mtr height of wall with existing angle iron Y shaped placed 2.4mtr or 3mtr apart and with 9 horizontal R.B.T reinforced barbed wire,stud tied with G.I staples and G.I clips to retain horizontal,including necessary bolts or G.I barbed wire tied to angle iron ,all complete as per directions of Engineer incharge with re enforced barbed tape (R.B.T)/ spring core (2.5mm thick) wire of high tensile strength of 165kg/Sq.mm with tape (.52mm thick ) and weight 43.478 gm/mtr (cost of M.S angle,C.C blocks shall be paid 4separately)

Reinforcement of R.C.C Work including straightening,bending cutting in position and binding all complete.hot rolled deformed bars

16mm 12mm 8mm Ring 8mm @ 6” c/c

Structural Steel work in single section,fixed with or without connecting plates,including cutting,hoisting fixing in position and applying priming coat of approved steel primer all complete Gate1 and Gate 2 as per Drawing

Centering and shuttering including strutting,propping etc,and removal of form for

Foundations,footings,bases for columns

Column, Pillars,piers,abutments,posts and struts

Painting steel work with deluxe multi surface paint of required shade to give an even shade two or more coats applied of approved brands and manufacturers G ate1 and Gate 2

Carraige of sand/aggregate for an average lead of 15Km including loading unloading complete

M/S ANAYAT ALI

M/S Mohd Sadiq hardass

M/S MOHD ABASS

MS MOHD SALMAN

M/S ABDUL QAYOOM BEARAS DRASS

M/S SHOWKAT ALI

m/s imtiyaz ahmad

M/S ZANAB BANO