(A) Rewinding of 160KW 550V, Motor Kirloskar make Sl.No.29412213-2 of Phularitand CHP (B) complete rewinding/repairing of 10KVA, 3.3KV/220Volts Transformer installed at Phularitand OCP, AMP Colliery under Barora Area.

Complete repairng of stator & rotor of 160KW Motor

Complete repairng of stator: Dismantling of both side end cover grease cap etc. and after rewinding, refitting the same

Dismantling of old coils

Slot cleaning and varnishing

New super enameled copper wire (48coils x2.6Kg.) minus scrap copper value @400/- i.e.(1000-400=600/-Kg.)

Varnish

Slot insulation paper

cotton tape

Glass tape

Providing of wedges

Soldering materials

Connection lead

Heating charges

Ampere tube

Glass cloth

Labour charges for coil making and rewinding

Complete repairng of stator: Dismantling of both side ring with the help gas cutter

Dismantling of rotor bar from the slots

Providing and fitting of new bar for rotor in place of existing bar @1000/-minus less scrap 400/-

Providing of copper rotor ring new @1000/- minus less scrap 400/-

Machining of both side ring

Both side breezing with rotor bars

Silver breezing rod

Dismantling of both side bearing and fitting

Both side bearing housing for new slip new casting and machining and fitting

Rotor balancing

Providing of new bearing 6319

Welding and machining of both side end cover

Grease

complete rewinding/repairing of 10KVA, 3.3KV/220Volts Transformer

New Electrolytic copper wire @1000/-per kg. (less scrap value adjusted@400/-per kg.)

Re-insulation with DP covering for primary and secondary Coils

Soldering materials

Insulating materials

Cork sheet for top cover bushings etc.

Transtörmer Oil Filtrations

Energy charges for heating

Primary side bushing

Secondary side bushing

Tank cleaning and paintings

Labour charges

Total impact of GST for the purpose of CTC