Modernization of Quality Control Wing- Procurement of Lab equipments-Concrete mixer machine, Vibrating table, Thermostatically Controlled Oven etc. for Quality Control Lab at Palakkad.

Amount

Purchase of Gauging Trowel 100 mm to 150mm long blade with straight edge confirming to IS:4031 / IS:10086 for making cement paste

Purchase of Wash bottle plastic squeeze type 250 ml capacity to measure and add water to make cement paste

Supplying, installing and demonstrating Vibration Machine with timer with NABL Calibration certificate for the preparing of cement mortar cubes for the determination of compression strength as per IS standard ( IS : 10080-1982). Complete frame assembly consist of device to hold 7.06 cm cube mould to feed the sample in the mould. The frequency of vibration is 12000-400 RPM vibration per minute supplied complete with 7.06 cm cube mould with one number poking rod to meet IS requirements as per BIS/ISI/ASI specification including cost of conveyance and 1 year service and maintenance charges etc.

Purchase of cube mould of size 70.6 mm x 70.6 mm x 70.6 conforming to IS : 10080-1982 for making cement mortar cubes

Purchase of standard sand confirming to IS: 650 -1966 : Grade I (25 kg bag)

Purchase of standard sand confirming to IS: 650 -1966 : Grade II (25 kg bag)

Purchase of standard sand confirming to IS: 650 -1966 : Grade III (25 kg bag)

Purchase of test sieve of mesh size 90 micron with base and lid conforming to IS 4031 (part 1) : 1996 for finding fineness of cement

Purchase of Standard Le ChateIier flask of 250 ml capacity with taping rod and funnel conforming to the IS : 4031 ( Part 11 ) - 1988 for finding specific gravity of cement. The neck of flask is graduated from 0 to 1 ml and from 18 to 24 ml in 0.1 ml graduation with accuracy of 0.05 ml

Supplying, installing and demonstrating thermostatically controlled oven, with interior of non-corroding material to maintain the temperature at 110 ± 5°0 C for conducting various tests on aggregate as per IS standards. Consist of chamber with Micro Processor based Digital Temperature Controller cum indicator having capacity of 90-100 liters approximately.

Purchase of Thickness gauge for determining the Flakiness Index of Aggregates. Consists of metal frame and panel with slots of different standard length and width as specified in IS 2386 (PART-1) : 1963

Purchase of Length gauge for determining the Elongation Index of Aggregates. Consists of a hard wood/metal base with vertically mounted metal studs as specified in IS 2386 (PART-1) : 1963

Purchase of Enamel tray of size 450 x 300 x 40 mm for sampling various materials and keeping materials for oven drying.

Purchase of Pycnometer consists of 1 kg Glass jar with Brass Cone, Locking Ring and Rubber Seal for finding specific gravity and water absorption of fine aggregates as per IS 2386 (PART 3) : 1963

Purchase of Filter paper 100-110 mm circles, packet of 100 No's for conducting specific gravity test and water absorption test of fine aggregates as per IS 2386 (PART 3) : 1963

Glass funnel 125 ml capacity to filtering water from pycnometer

Supplying, Installing and demonstration of concrete mixer (Drum type) 30L capacity for laboratory purpose of mixing small quantities of concrete of uniform consistency used in preparation of concrete cubes. Electrically operated mixer of approved make with authorised service providers within Kerala state consists of a steel vessel of 30 liters, mounted on a frame. The vessel can be tilted to any angle by a handle. This facilitates mixing and discharge. Blades are provided inside the vessel to mix the material thoroughly in dry and wet conditions suitable for concrete mix design and proportioning as per IS 10262 : 2019. Supply includes cost of conveyance, one year maintenance and service charges, manufacturers instruction manual and test reports/calibration reports etc. as per the direction of departmental officers authorised.

Supplying, Installing and demonstration of vibrating table 75 cm x 75 cm table top of approved make with authorised service providers within Kerala, motorised for proper compaction of cement concrete while casting specimens for compression testing during mix design as per IS 10262 : 2019. The table top is suitable to hold 6 No's of concrete cube moulds and has stops along its edges to prevent moulds from sliding off the table during operation. Purchase includes one year maintenance and service charges, manufacturers instruction manual and test reports/calibration reports etc. as per the direction of departmental officers authorised.

Steel tamping rod 600mm length and 16 mm diameter for compacting concrete into cube moulds

Steel straight edge for striking off samples in containers

Cast Iron Mould of 150 mm x 150 mm x 150 mm with ISI mark

Double wheeled wheel barrow for carting away remains of test cubes and other materials

ADITHY SCIENTIFIC

SANCORP MEDICAL DEVICES