Construction of Inspection Hut Dhanag Baijnath Forest Range under Forest Division Palampur Forest Circle Dharamshala (H.P) during the year 2021-22

Amount

Cutting in earth work and disposal of excavated earth upto a lead 20 mtr.

Excavation in foundation trenches etc in earth work lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear form the edge of the excavaion and then returning the stacked soil in 15cm layers, when required in to plinths sides of foundations etcetera , consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20metres in pick jumper work.

Providing and laying cement concrete 1:6:12 (1Cement : 6 Sand : 12 graded stone aggregate 40mm nominal size) and curing complete exluding cost of centring and shuttering in foundation and plinth.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approve quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 ( 1 cement : 6 sand).

Squared rubble masonry coursed with hard stone of approved quality in founadtion and plinth i/c raking out joints in cement Mortar 1:6 ( 1Cement : 6 Sand)

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in: i)Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 mtr in depth in all ht from floor.

ii) Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc. up to 200mm in thickness.

R.C.C. work 1:2:4 (1cement;2 Sand: and 4 graded stone 20 mm nominal size including curing complete but excluding cost of form work and reinforcement. (a) Suspended floors, roofs , landing and shelves and their supports balcinies , beams gorders, bressumers and cantilevers upto floor two levels.

Providing tor mild steel/ tor steel reinforcement for R.C.C work including bending,binding and placing complete

Brick work using common burnt clay building bricks with rat trap bond in super structure in cement mortar 1:6 (one cement : six sand) second class bricks i) above plinth level upto floor two level .

Half brick masonry in cement mortar 1:4 in super structure i/c curing complete.

Wood work in frames of doors, windows and clcresting windows and other frames wrought framed and fixed in position in Ist class teak wood.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm diametre with prepainted limpet and rubber wasshers complete with all accesories as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating+back coat of polyster of 5microns over 5 microns primer including fixing with screws prepainted iron J or L hooks,bolts and nuts 6mm dia meter and prepainted G.I limpet and bitumen washers complete with all accesories as reqired as per the direction of Engineer-in-charge.

Providing and fixing valley 60cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm dia meter with prepainted GI limpet and bitumen washers complete with all accesories as required as per the direction of Engineer-in-charge.

Providing and fixing of M.S. BP sheet 1.66 mm to 2 mm thick in eaves board /facial /soffits /celling including cutting , fixing and welding to steel roof membersand applying a coat of red lead primer complete as per the instruction of Engineer - in - charge ( Base members of steel work shall be measured & paid seperately).

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Stone soling under floor property hand packed and consolidation by hand ramming complete.Note:- Rate as per HPSR 2009

Providing and fixing 10 mm thick anti skid water proof stain and impect resistsnt heavy duty verified tiles Nitco or equvalant600 x600x10 mm manufactured of approved shade and colour in flooring , treads of step and landing laid on a bed of 12 mm thick cement mortor 1:3 (1 cement :3 sand ) laid over and joined with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing and laying of duro stone vitrified tiles (300 x300x10 mm) in grey / coloured of of approved shade innflouring , tresds of steps and landing kaid on a bed of 12 mm thick cement mortor1:3 (1 cement :3 sand ) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete .

White glazed tiles 6mm thick in skriting, risers of steps and dado 12mm thick cement mortar 1:3 (1cement : 3sand) and joint with cement slurry.

15 mm thick Cement plaster 1:4 (cement :sand in respective ratio in rough sides of brick stones\concrete walls for plastering upto floor two level finished even and smooth including scaffolding .

Providing and fixing MS grill of required pattern in wooden frames of windows etc. plain grill

Steel work welded in built up sections, trusses and frames work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (In trusses and trussed purlins in buildings) a) In beams joists, channels, angles, tee, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

Steel work welded in built up sections, trusses and frames work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (In trusses and trussed purlins in buildings)

Providing and fixing of panelled glazed or panelled glazed shutter for door and windows including black enamelled iron butt hinges with necessary screws 40 mm thick. (1st class deodar wood)

P/F wire gauge shutter using G.M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors &window. Including bright finish/black.

Providing and fixing glazing in door , window , ventilator shutters and partition etc with PVC/ neoprens gasket etc . Complete as the archutectural drawing and direction of Engineer - in - charge . Glazing with glass panes of 5.50 mm thickness (weight not less thaN 13.75 Kg/sqm.

Providing and fixiing of 19 mm thick Commercial board water proof shutters for cup board i/c fixing with nikel plated piano hinges with screw etc complete )

Providing and fixing of standered quality heard board sheet lining with jointing and nais etc. As per HPSR 2009

Preperation and fixing of 19 mm thick Commercial board water proof in selves / box for cup board fixing with butt joints & fixing with nails & screew etc. Complete

Providing and fixing 4 mm thick burl/ teak ply pf standered quality and of approved shade & design wall lining i/c fixing with approved adhesive , butt jointing and nails & screwetc. Complete HPSR 2009

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc complete i) 300x16mm

Providing and fixing aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etc complete. i) 300x10mm

ii) 250x10mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etcetera complete. i) 125mm

Providing and fixing 100mm bright finished hard drawn hooks and eyes. i) 100mm

Providing and fixing of artical board celling of approved quality with butt jointing and nail ( frame work and cover fillets to be paid for separately ). Cement bounded particle board Note:- Rate as per HPSR 2009

Wall painting two coats with plastic paint of approved brand and manufacture on undecorated wall surface to give an even shade including thouroughly brushing the surface free from mortor dropping and other foreign matters and also including preparing the surface even and sand papered smooth including applying of puty as required for making the surface .

Finishing wall with Acrylic Smooth Exterior paint of required shade ( two cote) to give even shade and final finish after throughly cleanning the surface to remove all dirt , dust and other forgin matter etc including sand papper smooth complete .

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting Ready mixed paint brushing with white lead for priming.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping with white enamel paint.

Polishing two coat with malamine polish of reuired shade on new wood and wood base surface to give an even surface i/c cleaning the surface of all dirt , dust and sand papered smiith and i/c a coat of wood filer

Applying priming coat over new steel and steel based surface to give an even shade with enamel shade wih red oxide .

Painting two coats (excluding priming coat) on previously painted steel & other metal based surface with ready mixed paint , brushing oil, grease to give an even shad ei/c cleaning of all dirt dust and other forgin matter and sand papering and stopping

Provding under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/stone aggregate 40mm nominal size) wall rammed and consolidated and grouted with fine sand including preparetion of ground. Note:- Rate as per HPSR 2009

Providing plinth protection 50mm thick with cement concrete 1:3:6 (1Cement : 3Sand : 6 graded stone aggregate 20mm nominal size)

Constructing Coursed rubble hammer dressed "U" Shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1 cement : 6 sand) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) including earth work and laying 10cm cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size) and 7.5 cm. cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design. Note:- Rate as per HPSR 2009

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Sansar Rana

Rakesh Kapoor

satish abrol

GOKUL RAM