REPAIR TO TILES ROOF SHEET FALSE CEILING AND CONNECTED ALLIED BR REPAIR WORKS IN ZONE A AREA OF AGE BR I AT AHMEDABAD CANTT

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for.

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete all as specified.

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.11 Sqm but n exceeding 0 .18 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed. complete all as specified and directed.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified

M&L for Vitrified Ceramic tiles light shade 10 mm, (square or rectangular) area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6

All as per item No 6 above but on vertical surfaces incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding.

S&F in repair 15 mm bore angle cock with flage complete all as specified and direcrted.

S&F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F in repair central hole basin mixer with 450 mm long braided hoses of make Jaquar cat part No QQT-7167B or its equivalent make complete all as specified and directed.

S&F in repair wall mixer 3-in-1 system with provision of both hand shower and overhead shower of make Jaquar cat part No QQT-7281 or its equivalent make complete all as specified and directed.

S&F in repair two way bib cock with wall flange of make Jaquar cat part No QQT-7041 or its equivalent make complete all as specified and directed.

S&F in repair angular stop cock with wall flange of make Jaquar cat part No QQT-7053 or its equivalent make complete all as specified and directed.

S&F in repair towel rack 600 mm long with lower hangers of make Jaquar cat part No AKP-35781P or its equivalent make complete all as specified and directed.

S&F in repair toilet paper holder with flap of make Jaqur Cat part No AQN-7753 or its equivalent make complete all as specified and directed.

S&F in repair shower 200 mm dia with arm of make Jaqur Cat part No OHS-CHR-1613 or its equivalent make complete all as specified and directed.

S&F in repair one piece closet with integrated cistern, seat cover and twin flush fitting of size 710x370x810 mm white colour of Make Prayag Cat part No 4260 or its equivalent make complete all as specified and directed.

S&F in repair counter type wash basin white colour of size 560x410x180 mm of make Prayag Cat part No 4790 or its equivalent make complete all as specified and directed.

S&F in repair health faucet with 1.2 m long flexible tube of make Jaqur Cat part No ALD-577 or its equivalent make complete all as specified and directed.

S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

Supply only pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore.

S&F in repair pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore.

Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.

Demolition of brick work built in cement mortar of any description.

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete.

Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surfacefinished the plastered surface even and smooth without using extra cement complete all as specified and directed.

M&L for prepartion of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and directed.

M&L preparing newly plastered or unplastered surface of wall and applying three coats of white washing complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs,chajjas and similar work n. exc. 200 mm thick horizontal or slopping in fair finished surface of concrete flat complete all as specified and directed.

M & L for use and waste of form work to edges of concrete flats, treads, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 5 cm and not exc. 10 cm in fair finished surfaces complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1½:3 (Nominal Mix) type A-1, using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

S&F MS TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, quality conforming to IS 1786 - 1985 complete.

M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) complete all as specified.

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as specified

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as specified

Removing of existing unserviceable water proofing treatment with PCC padding, taking down cement plaster etc of any description and cleaning of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete.

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in roof as levelling coarse etc finished even and rough to received top layer complete all as specified.

M&L for water proofing treatment to non assessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @3% by weight of cement & applying one coat of bitumenous primer @ 0.30 kg/sqm & laying APP based polymeric modifed membrane with polyster non woven reinforced of weight not less than 3kg/Sqm of 3 mm thick with polythene finished sealing with side overlaps of 75mm & 100 mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., all as per manufacturers instructions and direction.

S&F Coloured textured designer ceiling board 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction

S&F in repair 6 mm thick asbestos cement plain building boards, fixed to timber framework or fixed in iron frame etc as in ceiling complete all as specified.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for.

Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified and directed.

S&F MS rolled sections as in framing for ceiling, cladding, glazing and the like fixed with angle cleats and connecting plates, etc conforming to Fe-290 (Gde E- 165) complete all as specified and directed.

S&F 2nd class hardwood clean swan as in scantlings complete all as specified.

S&F MS roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E-165)complete.

r s corporation

Shreeganesh Construction

divyarsh entrprise

ALBA AC AND REF SERVICES

Shree Builders

Shree Krushna Supply Corporation