Construction of Toilet Complex and Kudumbasree Cafe Take a Break in Tavanur Grama Panchayat, Malappuram District.

Amount

Civil Work

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

od313468/2021_2022 : Laterate masonry with neatly dressed laterate stone of size 35x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

od313917/2021_2022 : Supplying and fixing 5060 mm x 4460 mm x 2200 mm modular toilet cabin for Toilet and Caffatiriya, main structure supporting column at corners is made out of GI 100x40 mm pipe 16 gage thick welded between the top and base frames fixed with foundation boult .The structural base frame work made out of 60x60 mm Pipe and GI 60 x 40, GI 60 x 40 as intermediate support both ways to support the Wall with 50mm thick PUF Wall STRUPAN panel made out of Inner and outer in TRYPIZOIDAL AND MICRORIBED PPGI sheet with CFC free pentane Blown polyurethane foam as the core which is injected between the 2 sheets with highly sophisticated computer controlled foaming machine. The panel is manufactured by using continuous foaming method. STRUPAN PUFF --PANEL PREFABRICATED Polyurethane sandwich panels comprising of exterior and Interior with micro ribs and 1000 mm cover width made out of 0.5 MM PPGI RMP 240MPA /0.5 mm PPGI RMP 240 MPA color coated galvanized steel, 120 GSM Zinc coating with 20 microns polyester paint. Core - CFC / HCFC free Pentane Blown Polyurethane foam density of 40 Kg / m3 in 50 mm thick shall be supplied in 1 mtr roof Supply of 30mm thick PUF Roof STRUPAN panel made out of Inner and outer in TRYPIZOIDAL AND MICRORIBED PPGI sheet with CFC free pentane Blown polyurethane foam as the core which is injected between the 2 sheets with highly sophisticated computer controlled foaming machine. The panel is manufactured by using continuous foaming method. STRUPAN PUFF --PANEL PREFABRICATED Polyurethane sandwich panels comprising of exterior and Interior with micro ribs and 100 mm cover width made out of 0.5 MM PPGI RMP 240MPA /0.5 mm PPGI RMP 240 MPA color coated galvanized steel, 120 GSM Zinc coating with 20 microns polyester paint. Core - CFC / HCFC free Pentane Blown Polyurethane foam density of 40 Kg / m3 in 30 mm thick shall be supplied in 1 mtr width The structural Top frame work made out of 2mm thick GI 60 x 40 pipe as peripheral frame work and GI 60 x 40 & GI 40 as intermediate support at an interval of 1200 mm to support the roof and roof pronection all round 700 mm respectively. Fixing all floor area and inside wc 1500 mm height 600x600 6 mm thick ISI mark tiles. Fixing 3 no EWC clossets with Seat cover , 500x400mm half pedestal wash basin 2 nos , 5 no Soap dish with necessary plumbing in each area using with ISI mark PVC Pipe and necessary electrical wiring with ISI mark cable and fittings. Supplying and fitting 5 nos 600 mm and 2 Nos 1200mm tube light ISI Mark. Standard Size puff Panel door 5 Numbers (80x210 cm ) and 1 number( 122x210 cm) ..12 handles, 12 tower bolt, 12 L-, galvonasied GI vendilators( 60x60 cm)with exhaust fan 5 nos in each compartment feeding room and cafeteria ,Fixing 600x600 mm mirror 6 mm thickness 2 Nos Fixing 1200x1300 mm 6 mm thick plain glass with rubber beeding for openings including all cost of materials conveyance laying labour charge etc complete As per the direction of departmental officers

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

od315330/2021_2022 : Supplying and fixing P V C Septic tank 1500 ltr capacity <br>ISI Model ,including all cost of materials conveyance laying labour charge etc complete as per the direction of Engineer in Charge<br>

od315331/2021_2022 : Supplying and fixing P V C Water tank 1000 ltr capacity ISI Model ,including all cost of materials conveyance laying labour charge etc complete as per the direction of Engineer in Charge

od315383/2021_2022 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.<br>

SHAHEER K A

AJESH

Bidder Name

SHAHEER K A

MALABAR EQUIPMENTS AND GENERAL TRADERS PVT LTD

AJESH