MAINTENANCE, REPAIRS AND RECANNING TO CERTAIN STEEL FURNITURE AT AFS BIDAR

Amount

Almirah Large Steel :-FD-1031,FD-351,FD-67(M) : S&F new lock (brass) 6 levers with duplicate key fixing with suitable machine screws including removal of existing unserviceable lock of any description in any position complete all as specificed and directed.

S&F new chromium plated handle 100 mm long fixing with suitable nut / pins including removal of existing unserviceable handle complete all as specificed and as directed.

S&F new shelves made out 1.00 mm thick MS sheet of existing patterns fixing with suitable screws including Removal of existing unserviceable shelves complete all as specificed and as directed.

Removal of complete dents filling with putty including preparation of old painted surfaces and applying one coat synthetic enamel paint of approved shade by spray painting for internal and external surfaces complete all as specificed and as directed. Note :-Almirah as a whole shall be measured as single unit.

Almirah Medium Steel :- FD-1032, FD-350, FD-354 : S&F new lock (brass) 6 levers with duplicate key fixing with suitable machine screws including removal of existing unserviceable lock of any description in any position complete all as specificed and directed.

S&F new chromium plated handle 100 mm long fixing with suitable nut / pins including removal of existing unserviceable handle complete all as specificed and as directed.

S&F new shelves made out 1.00 mm thick MS sheet of existing patterns fixing with suitable screws including Removal of existing unserviceable shelves complete all as specificed and as directed.

Removal of complete dents filling with putty including preparation of old painted surfaces and applying one coat synthetic enamel paint of approved shade by spray painting for internal and external surfaces complete all as specificed and as directed. Note :-Almirah as a whole shall be measured as single unit.

Chair Varandha FD-259 / 256 / 359: Re-canning of chair varandah after removing the existing cane and to carry out necessay welding and repair if required and painted with two coats of white synthetic enamel paint and weaving with new white plastic cane of approved quality with 4mm wide half round type for seat and back as per pattern shown on drg including fixing of 4 Nos hard rubber shoes of 20 mm dia (black colour) to each chair verandah complete all as shown ansd as directed. Note: Cane shall be of plastic strips of superior quality, type-I, (HDPE) white or cream as directed by Engineer-In- Charge of uniform width conforming to IS-5387.

Locker Bedside Steel SK-867, FD-257, FD-1029, FD-127(M) : S&F new lock (brass) 6 levers with duplicate key fixing with suitable machine screws including removal of existing unserviceable lock of any description in any position complete all as specificed and directed.

S&F new chromium plated handle 100 mm long fixing with suitable nut / pins including removal of existing unserviceable handle complete all as specificed and as directed.

Removal of complete dents filling with putty including preparation of old painted surfaces and applying one coat synthetic enamel paint of approved shade by spray painting for internal and external surfaces complete all as specificed and as directed. Note :-Locker bed side as a whole shall be measured as single unit.

Table Office Clerk Steel :- FD-84(M), FD-1004 : S&F new top made out of 18mm thick pre-laminated particle board, exterior grade, ISI marked, with one face decorative laminate and other balancing white and 6mm thick teak wood beading all around including Removing old unserviceable top from Table office clerk steel complete all as specificed and directed

S&F new drawer made out of 1mm thick MS sheet made to shape, welding etc,including preparing the new steel and iron surfaces and applying, two coats of smoke grey synthetic enamel paint ( first quality) over a coat of red oxide primer all as shown on drg including removing the unserviceable drawer from table complete all as specified and as directed. Note: Each drawer will be measured as one unit.

&F new lock (brass) 6 levers with duplicate key fixing with suitable machine screws including removal of existing unserviceable lock of any description in any position complete all as specificed and directed.

Removal of complete dents filling with putty including preparation of old painted surfaces and applying one coat synthetic enamel paint of approved shade by spray painting for internal and external surfaces including replacement of hard rubber shoes with suitable screws complete all as specified and as directed.

Table Office officer Steel :- FD-84(M), FD-1003 : S&F new top made out of 18mm thick pre-laminated particle board, exterior grade, ISI marked, with one face decorative laminate and other balancing white and 6mm thick teak wood beading all around including Removing old unserviceable top from Table office clerk steel complete all as specificed and directed

S&F new drawer made out of 1mm thick MS sheet made to shape, welding etc,including preparing the new steel and iron surfaces and applying, two coats of smoke grey synthetic enamel paint ( first quality) over a coat of red oxide primer all as shown on drg including removing the unserviceable drawer from table complete all as specified and as directed. Note: Each drawer will be measured as one unit.

&F new lock (brass) 6 levers with duplicate key fixing with suitable machine screws including removal of existing unserviceable lock of any description in any position complete all as specificed and directed.

Removal of complete dents filling with putty including preparation of old painted surfaces and applying one coat synthetic enamel paint of approved shade by spray painting for internal and external surfaces including replacement of hard rubber shoes with suitable screws complete all as specified and as directed.

Table 900 X 900 mm/ 900mmX600mm with drawer/ 900mmX600mm without drawer STEEL : S&F new table top of 900X900mm, made out of 18mm thick pre-laminated particle board, exterior grade, ISI marked, with one face decorative laminate and other balancing white and 6mm thick teak wood beading all around and replacement of hard rubber shoes with suitable screws including Removing old unserviceable table top from Table steel complete all as specificed and directed

Removal of complete dents, filling with putty including preparation of old painted surfaces and applying one coat synthetic enamel paint of approved shade by spray painting complete all as specified and as directed.

Teapoy varandha FD-383, FD-35, FD/MAP/E6/17 : S&F new top of teapoy made out of 18mm thick pre-laminated particle board, exterior grade, BWR, with one face decorative laminate and other balancing white and 6mm thick teak wood beading all around including Removing old unserviceable top of teapoy complete all as specificed and directed

Ppreparation of old painted surfaces with sand paper, fiiling with putty and applying one coat synthetic enamel paint of approved shade by spray painting and replacement of hard rubber shoes with suitable screws complete all as specified and as directed.

Mahesh Traders

famous construction