Special Repair Wk Comprising Of Roof Repair, Complete Rewiring, Tiling, Sanitary Fitting In Bathroom/Toilets And Plastering At Bldg No 695 (Block No Iii, Iv) Or Living Accn Of Hq Sqn 18 Armd Bde In Army Area Jodhpur

Amount

Demolition PCC flooring (unreinforeced) of any description and any position as in flooring plinth protection etc

M/L for 25mm thick cement concrete type B-0 1:2:4 (using 15mm graded crushed stone aggregate) complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 17-20 mm thick over 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.

All as per Item No 4 above but as in riser of step, skirting, dado over 10mm thick rendering in CM (1:4) and polishing complete.Skirting shall be flush with inner plaster of walls

M&L hardcore broken stone/boulders of guage exc 63mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 50mm thick PCC 1:3:6 type C-1 using (20mm graded stone Agg) as in plinth protection finished complete including forming joints in 2 mtr inetrvals and filled with bitumen mastic all as drected.

Demolition of stone masonry built in cement mortar

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6

All as per item No 09 above but except stone

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing

Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water.

M&L Rendering 10 mm thick CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete

M&L for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth on stone wall surface all as specified.

M&L preperartion of newly plastered surfaces of wall and applying Two Coat OBD over Two coat Birla white putty complete.

M/L two coat of Cement Base paint on newly plastered/ unplastered and old surfaces over one coat primer on wall & including preparation.

Removing complete existing treatment and preparation of old surffaces by brooming down or steel wire brushinng scraping moulds,moss and effloroscent salts & trading oil and greasy spots to wall including cornices etc plastered or unplastered surfaces (old decorated surffaces) and M&L for applying two coats of white wash on one coat putty on ceiling all as specified and as directed.

Removing complete existing treatment and preparation of old surfaces by brooming down or steel wire brushinng scraping moulds,mossand effloroscent salts &tradiing oil and greasy spots to wall including cornices etc plastered or unplastered surtfaces (old decorated surffaces) and M&L for applying Two Coat OBD over two coat Birla/ JK wall putty on plastered/ unplastered surfaces on wall all as specified and as directed.

M&L preperartion of newly plastered surfaces of ceiling/ chhja/ soffits of slab and applying three coat of white wash complete

Taking down shutter of any description exc 2.00 sq m n exc 4.0 sqm each

Taking down chowkat or frame n exc 1.50 sqm (without taking off shutter from frame )

All as per item No 22 above but area exc 1.5 Sqm but not exc 4.00 sqm

S&F pressed steel frame for doors with one or more rebate of size 105x60mm incld necessary fixing, lugs, hinges, locks strike plate etc all complete as specified

M&L for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels with decorative vceneers on both faces complete fixed to frames .

S&F 35mm thick 2nd class glazed and skelton shutter, open rebated and prepare to recieive glass, gauge etc (without sash bars)edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauge etc all complete

S&F 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed

S&F 150mm mild steel barrel tower bolts, stove enameled black, with bright bolt & fixed

S&F Mild steel pressed handles, oval type, stove enameled black of size 150mm

S&F 300mm Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolts plate & two on staple plate & fixed

S&F for 150mm Alluminium, anodized, barrel tower bolts extruded section & fixed

S & F for 150mm Extruded aluminium alloy handles, fabricated type anodized

Taking down MS windows/ventilators

S&F of Factory made steel window box type using ERW hollow 'P' section including box type hinges with steel handle , tower bolt and steel peg stey complete with glazing bars , dovetailed or welded comlete with cooler opening all as specified incl repair to jams in CM 1:4 complete all as directed by the Engineer -in - charge

S&F of Factory made steel window box type using ERW hollow 'P' section including box type hinges with steel handle , tower bolt and steel peg stey complete without glazing bars , dovetailed or welded comlete without cooler opening all as specified incl repair to jams in CM 1:4 complete all as directed by the Engineer -in - charge.Note : for item No 99 & 100 Both shutters jointed internally with flat iron 40x 4mm complete and Grill/ Gurad bar shall be measured and paid separtly under resective item of Sch 'A'

Supply and fabrication of Mild steel guard bars and welded to window frames all as specified.

S/F of steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, all as specified.

M/L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work all as specified.

M/L for two coat of enamel paint over a coat of pink primer on new wooden surface including preparation of surface, over 10 cm width or girth all as specified.

M/L for one coat of enamel paint on old wooden surface including preparation of surface, over 10Cm width or girth all as specified.

M & L for prep of the steel surfaces of steel windows & vents & applying 2 coats of syn enamel paint over a coat of red oxide of any description over 10cm grith or width, not otherwise described

M/L for one coat of enamel paint on old steel surface including preparation of surface, over 10Cm width or girth all as specified.

Hacking out old broken glass (any thickness , size , quality or description ) from metal frame incld punching or drilling out old glazing pins /spring clips and provding and fixing new ones.

S/F for 3 mm thick plain glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane.

S/F for 3 mm thick figurred , pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane.

S&F flate iron for hold fast and similar works confirming to Fe 250 Gde E165.

S&F of 100mm bore Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof.

Demolition of RCC Roofs, floors (other than ground floors) , beams, staircases, landing, chajjas & similar suspended work

M&L for TMT bars 10mm dia and over cut to length,bent to shape required incl cranking bending spirally for hoping facia,chajjas and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips

All as per item No 49 above but 6 to 8 mm

All as per item No 49 above but 5mm dia and over upto and including 8mm dia in stirrups, spacers and binders

Formwork to soffits of suspended slab,landing & similar work n.exc 200mm thick (horizontal or sloping

All as per item No 52 above but to sides and soffits of beams, lintel and etc

Formwork to chullah hoods, chajjas, troughs & similar items including edges

M&L for M-25(20mm graded agg) design mix RCC in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L for M-25 (20mm graded agg) design mix RCC in beams, cantilevers, bressummers; lintels over 1.5m span

M&L for M-25 (12.5mm graded agg) design mix RCC in Chhajjas

M&L for roof treatement in the following stages :-(a) Applying evenly a coat of bituminous primer conforming to IS-3384 @ 0.40 ltr per sqm over and including 10 mm thick cement mortoar (1:4) and surfaces finished even and smooth without using extra cement all as specified .(b) Second coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg/Sqm . © Third layer of APP modified polmeric membrane centre core of 100 micron HMHDPE outer film 20 micron both sides thickness 2.00mm having weight 3.00 Kg/Sqm. (d) Fourth coat of blown type bitumen confirming to IS 702-1988 grade 85/25 @ 1.2 Kg per Sqm. (e) Fifth coat of 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate in padding , well copecated with groove filled with mastic bitumen o f (1:1) size of PCC panel with grooves shall not be exceed 1.44 sqm all as specified.

Supply only integral water proofing compound.

S&F in repair vertrious china wash basin white flat back 550x400mm including bracket &15mm bore CP pillar thp

S&f in repair PVC valveless syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including brackets incld 32 mm PVC flush pipe as fixed in repair

S&F in repair of vitreous china clay water closet squatting pan or ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPEpipe etc all as specified.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store 15 mm dia

All as per item No 63 above but 20 mm dia

All as per item No 63 above 25 mm dia

Refixing old steel tubing and connections in new or old position(wall, ceiling, floor etc) all as specified (a) 15mm dia

All as per item No 66 above 20 mm dia

All as per item No 66 above 25 mm dia

S/F of water tubing, medium grade, galvanized, with all fittings fixed to wall all as specified (a) 15 mm dia,

All as per item No 69 above 20 mm dia

All as per item No 69 above 25 mm dia

Dismantling water tanks of capacity exc 250 ltrs but.nexc 500 ltrs and removing to store all as specified.

Dismantling water tanks of capacity exc 500 ltrs but.nexc 1000 ltrs and removing to store all as specified.

S&F Rotational moulded polythene water storage tanks (cylindrical vertical wih closed top) hoisted and fixed in all as specified.(Cap. 500 litrs)

S&F Rotational moulded polythene water storage tanks (cylindrical vertical wih closed top) hoisted and fixed in all as specified.(Cap. 1000 litrs)

Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms 20mm-210gms /25mm-455gms/40mm-690gms

S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed fixed as in repairs

S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed fixed as in repairs

S&F in repair of bib taps, fancy type, cast copper alloy chromium plated with fancy type handles screwed down ,screwed for iron pipe or for brass ferrule 15mm bore in repair.

S&F in repair 15mm bore stop valves, cast copper alloy, chromimum plated with fancy type handle with long shank & cup (concealed type), screwed down, high pressure, screwed both ends for iron pipe or for unions & fixed

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly-nuts, screwed for iron pipes & fixed

S&F in repairs urinal, half stall type flat back white colour fixed incl waste pipe & coupling.

S & F in repair for Brass chromium plated shower rose 125 mm size

S&F in repair stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of iron pipe or union and fixed in repair complete all as directed.

S&F in repair stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 20mm bore of iron pipe or union and fixed in repair complete all as directed.

S&F in repair PVC waste pipe for WHB/Urinal complete all as specified and as directed.

S&F in repair 15mm bore PVC connection 600mm long best quality with PTMT nuts complete all as specified and directed.

M&L for rounding of the edges of stone slabs as in cooking platforms , treads of steps shelves & cills etc all as directed at site.

S&F in repair MS chromium plated peg set of five fixing with wall complete

S&F in repair Corner shelf complete

S&F in repair Soap Dish complete

S&F in repair MS chromium plated peg set of five fixing with wall complete

S&F in repair tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as directed .

S & F in repair of Swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms)

Dismentaling of cast iron soil waste & vent pipes 100 mm dia incl all fittings etc complete.

Dismentaling of cast iron soil waste & vent pipes 75 mm dia incl all fittings etc complete.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls

S&F 75 mm bore PVC (SWR) bends any radius with oval acess door

S&F 110 mm bore PVC (SWR) bends any radius with oval acess door

S&F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with oval acess door

S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with oval acess door

S&F 110mm PVC (SWR) WC connector with lip ring

S&F UPVC Vent Cowl 75 mm bore

S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75 mm bore pipes

S&F PVC (SWR) gully trap 125 mm size setting and jointing with solvent cement

M&L for coloures Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match .

M&L for coloured Glazed ceramic tiles in vertical surface 300x450 mm size 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match . Note :- The tiles shall be in one or more colour patterns incl highlighters all as approved & directed at site .

Grinding & polishing of existing stone flooring (Kota stone) incl minor repairs to joints etc evenly with machine fitted with fine grade blocks (No. 120) & finest grade grit blocks (No. 320) complete to obtain mirror finish all as specified & directed

S&F factory made PVC shutter 30mm thick (style)consisting of frame made out of MS tube for top and bottom rails. MS frmae shall be covered with heat moulded plain color PVC channel having a PVC sheet for top rail of 20mm width width stuck in side with solvent cement for stiles and plain color PVC sheet for top rail lock rail on other sideand as gap insert for top rail and bottom rail. Paneling of plain color PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with slovent cement complete all as specified.

M&L for moulded Solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet incl all edges printed to match the shade reinforced with M.S. Sq tube, suppling & fixing in opening as per spec & drawing

Demolition of stone salbs laid bedded & jointed & pointed in CM

M&L for 75 mm thick Cement concrete type D - 2,1:4:8 (40 mm graded agg) as in sub base to floors incl well compacting & laid to levels all as directed.

S&F machine made precast cement concrete blocks (Interlocking pavers ) rubberised finished coloure of 60mm thick top layers of anti abrasive material laid over 50mm thick sand cushion. The interlocking tiles joint will be filled with fine sand.

S&F machine made precast cement concrete Kerb stone blocks of approved shape size using Cement concrete 1:3:6 type C1 (20mm stone agg) laid alongside paths /hardstanding jointed & pointed in CM 1:4 all as directed by Engr-in-Charge

M&L for chequered cement concrete tiles 20cmx20cm x25mm thick set jointd and pointed in neat cement slurry in floor all as specified and directed by Engr-in-charge.

Preparation of old plastered/unplastered surfaces of wall & applying two coat of exterier emulsion paint complete all as specified.NOTE:Finishes shall be carrying out in G +3 bldgs

M & L for mild steel work as in door frame (chaukats) of angle or other section incl.provn of 12mm dia deformed bar welded horizentaly to bottom of frame grade Fe-290 or Fe 330-0 incl. Preparing back of chowkat and applying two coats of tar & sanding

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 150 /200mm bore

M&L for 150 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars

M&L for 200 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose, celing fan etc complete

M & L for Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FR) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked in and including PVC rigid conduit (MMS) ISI marked with accessories fixed Concealed in wall / roof / ceiling etc and including sunken pressed steel terminal boxes in wall and 1.50 sq mm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :- One light point controlled by one, one way switch

All as per Item No 126 above but One fan/Exhaust Fan point controlled by one way switch.

All as per Item No 126 above but One socket outlet 3 pin 5/6 Amp on Same board

All as per Item No 126 above but One socket outlet 3 pin 5/6 Amp on independent board

All as per item No 126 above but with 2.5 Sq mm single core multistanded copper conductor cable for 6 pin 15 Amp socket outlet on independent board .

S&F switch flush type single pole one way 6 Amp ISI Marked .

S&F switch flush type single pole one way 16 Amp ISI Marked.

S&F socket outlet 3 pin, 6 Amp flush type ISI marked.

S&F socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type ISI Marked

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body ISI marked

Supply and fixing Exhaust fan 250 mm , sweep , Noise less, and necessary electric connection all as directed by engineer-in-charge.

Hanging only ceiling fan of any size, taken down under item no 1 above.connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor of size 0.5 Sq mm from ceiling rose/ connector to fan.

Light fittings, with1X0watt LED 230 volt 50 Hz bulk head luminaries, complete with all accessories and including connecting up with PVC insulated and sheathed , 1100 volts grade , flexible , multistranded 1.0 sq mm copper conductor three core cable.

S& F Fluorescent tube light fitting. single tube, 1 x 20 w, T8, Complete with LED Tube rod 20 Watt 230 v ( power factor not less than 0.90 ), bipin holders connector block, etc. complete with all accesssories internally pre-wired , including Fl lamp T5 28 W and connectiong up with PVC insulated and sheathed , 1100 volts grade , flexible , multistranded 1.0 sq mm copper conductor three core cable .

M&L for sub main wiring with 2x4 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed (FR) cable incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed (FR)cable as earth wire. , passing through in and including PVC conduit ( MMS), ISI marked with accessories fixed to surface of wall/roof/ceiling etc. and making good the distrurbed surface of wall Note :-(i) Two runs of cable 6 Sqmm and One run of 4 Sqmm along with PVC conduit shall be measured as unit length.

M & L for sub main wiring (concealed) complete with four single core 10 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 to 32 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 10 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Note: 5 run of 10 sqmm & one run of PVC conduit shall be measured as single unit

S & F sheet metal enclosures for DB V-TPN for incorporating MCB 100 Amp as incoming & MCBs, TP, 6 way as outgoing, IP-54 with metal double door with 100 amps rated busbar, 415 volts, as per IS-8623 including taking down the old unserviceable TPN DB, all as specified and as directed.

S&F Prewired distribution board in sheet metal encl , prewired when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS SPN 12 way

S& F MCB SPN 32 A mps 16 KA

S&F MCB single pole 5 to 30 Amps, 10 Ka, "C' series

S & F MCB TPN, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

Supply and fixing Sheet metal Busbar chamber factory fabricated powder coated finish complete with copper busbar TPN 125 Amps including fixing arrangement etc complete

M & L for earthling complete with galvanized Steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 meters below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and incl galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by GI protection pipe light grade 15mm dia connected to main earth wire on pole or controll board GI pipe light grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1 40mm yhick Precast RCC -25 cover reincorced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50m complete all as sprecified and shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

BEYLIM INFRA

Rajesh Enterprises