Comprehensive Maintenance of EOT and HOT Cranes inside Naval Dockyard under GE Utility-I Visakhapatnam

Amount

[e] The unit rate quoted for Comprehensive Maintenance shall be deemed to be inclusive for Load Testing for each crane ONCE during the contract period under 110% of full load capacity of cranes on hoisting, long travel and cross travel for checking the performance including deflection test with necessary manpower, instruments, necessary internal transportation required complete all as directed by Engineer-in-Charge. Load / Deflection Test for all EOT Cranes shall be carried out by the contractor through Licensed Crane Inspector in presence of department representative as directed by the GE & user representative and test results shall be recorded and necessary certificate shall be obtained from Licensed Crane Inspector and submitted to the department. The loads required for the testing and necessary transportation shall be arranged by the respective user at the sites, but the man power / instruments / internal transport required for testing at different locations shall be arranged by the contractor. [f] The unit rate quoted for Comprehensive Maintenance shall be deemed to be inclusive for topping up of Gear Oil of Grade SP 320 as and when required as per capacity of Gear Box, Injecting and applying Grease as and when required and Rectification of Oil leakages if any from LT Gear Box of Cranes. [g] The unit rate quoted for Comprehensive Maintenance shall be deemed to be inclusive for painting of all cranes with one or more coats of synthetic enamel paint of approved shade as required ONCE during the contract period as directed by the Engineer-in-charge. [h] Conveyance and communication system like mobile phone etc. shall be provided by the contractor to the Crane Mechanic and Helper. [i] The contractor shall abide by the latest Labour Rules and Minimum Wages Act. [j] Wages paid by the contractor to the persons employed shall not be less than the minimum wages fixed by State/ Central Government from time to time whichever is higher.

[k] The contractor is responsible for making subscription towards Insurance, EPF, ESI, Labour Welfare Cess etc., as applicable and shall pay Gratuity, Bonus etc to the Workmen as per existing Labour Rules / Acts / Regulations and rate quoted shall be deemed to be included for the same. [l] The contractor shall be responsible for all Accidents / Injuries happening to the workmen. Any accident causing Minor / Fatal Injury, Partial Disability due to any untoward incident or non-adherence to Safety and IE Regulations or fault in maintaining of crane System / Safety Mechanism or on account of any mishandling / wrong operation / lack of knowledge of safety precautions or on account of any circumstances beyond his/their control, the contractor shall be solely responsible for settling all claims of compensation to the deceased, failing which department will have a right to recover any sum indicated / claimed by Labour Commissioner / Court authorities. No claim whatsoever will be entertained in this regard. No compensation is payable by the department on this account. Contractor shall provide first aid boxes to meet any emergency situations.

Supply Only Power Contactor of capacity 32 Amps, 3 Pole, Suitable for EOT Crane complete all as specified and as directed. Make: Siemens / L & T / Schneider / ABB / C&S/ BCH

Supply only Auxiliary Contactor of capacity 20 to 32 Amps, 3 Pole, Suitable for EOT Crane complete all as specified and as directed. Make: Siemens / L & T / Schneider / ABB

Supply only Limit Switches, LT & CT, 10 to 32 Amps, suitable for EOT Crane of capacity up to 3 ton complete all as specified and as directed. Make: Siemens / L & T / Schneider / ABB

Supply only Thermal Over Load Relay up to 14.5 Amps capacity, suitable for EOT Crane complete all as specified and as directed. Make: Siemens / L & T / Schneider / ABB / BCH / C&S

Supply only Brake Shoes Liner for EOT Cranes of any capacity complete all as specified and as directed. Make: As per OEM

Supply only Brake Bands suitable for EOT Cranes of any capacity complete all as specified and as directed. Make: As per OEM

Supply only Wheel Bearing for EOT Cranes [LT] up to 2 Ton capacity complete all as specified and as directed. Make: NBC / SKF

Supply only Wheel Bearing for EOT Cranes [CT] up to 2.5 Ton to 3 Ton capacity complete all as specified and as directed. Make: NBC / SKF

Supply only Wheel Bearing for EOT Cranes [LT] up to 4 Ton to 5 Ton capacity complete all as specified and as directed. Make: NBC / SKF

Supply only DSL Collectors of 10 Amps capacity suitable for EOT Cranes complete all as specified and as directed. Make: As per OEM

Supply only DSL Collectors of 32 Amps capacity suitable for EOT Cranes complete all as specified and as directed. Make: As per OEM

Supply only Steel Wire Rope 12 mm dia for EOT Crane complete all as specified and as directed. Make: Usha Martin / As per OEM

Supply only 10 Way Electrical Pendent Push Button Box with Push Buttons NO / NC Contacts Elements and Forward Reverse Interlocking for EOT Cranes complete all as specified and as directed. Make: As per OEM

Supply only Push Buttons of Electrical Pendent with NO/NC Contacts Elements for EOT Cranes complete all as specified and as directed. Make: As per OEM

Supply only Pendent Cable [1.5 Sq.mm, 12 Core Multistranded Copper Cable] complete all as specified and as directed. Make: Havells / Finolex / Nicco / KEI / Polycab / RR Kabel Ltd

Supply only PVC insulated, sheathed Multistranded flexible copper conductor cable of size 4 Core, 1.5 Sq.mm for EOT Crane complete all as specified and as directed. Make: Havells / Finolex / Nicco / KEI / Polycab / RR Kabel Ltd

Supply only HRC Fuses up to 32 Amps capacity for EOT Cranes complete all as specified and as directed. Make: L & T / Legrand / ABB / Siemens / Schneider / Havells

Supply only Brake Unit including Liners & Shoes suitable for EOT Cranes of capacity upto 3 Ton complete all as specified and as directed. Make: BCH / PATHE

Supply only Trailing Cable 3 Core X 4 Sq.mm complete all as specified and as directed. Make: Finolex/ Polycab/ Universal / RR Kable / Umesh

Supply only Trailing Cable 6 Core X 2.5 Sq.mm complete all as specified and as directed. Make: Finolex/ Polycab/ Universal / RR Kable / Umesh

Supply only Trailing Cable 4 Core X 2.5 Sq.mm complete all as specified and as directed. Make: Finolex/ Polycab/ Universal / RR Kable / Umesh

Supply only oil seals suitable for LT Gear Box of EOT Crane complete all as specified and as directed.

Supply only Gear Wheel Shaft suitable for Cranes of capacity upto 3 Ton complete all as specified and as directed.

M & L for Re-winding motors up to 1.5 KW capacity from EOT Crane including carrying to work shop, rewinding with existing gauge of super enamelled copper winding wire of superior quality with proper insulation and bringing back including testing complete all as specified and as directed.

All as per Serial Item No. 25 herein before but for motors of capacity above 1.5 KW and up to 3.7 KW complete all as specified and as directed.

All as per Serial Item No. 25 herein before but for motors of capacity above 3.7 KW and up to 5.5 KW complete all as specified and as directed.

All as per Serial Item No. 25 herein before but for Electric Magnetic Brake Coil of Cranes of any capacity omplete all as specified and as directed.

M & L for alignment of EOT Crane Tracks on both sides including gas cutting, welding and grinding for smooth movement of girder for LT Travel up to Bay length of 52.00 m complete all as specified and as directed.

Supply only VFD AC drive of capacity 5.5 KW/7.5 HP, with operating condition of 415V, 50 HZ, AC supply for 4 Ton single girder EOT crane of make Schneider including dismantling taking down old item from position complete all as specified and as directed.

Note for Serial Item No. 2 to 24: Spare parts shall be ordered on the contactor in writing by the Engineer-in-Charge as and when required. Contractor shall have no claim whatsoever in the event of ordering / non ordering the spares in full or part. Make and Model of the parts to be replaced shall be same as of existing parts of cranes.

R AND A ASSOCIATES ENGINEERS CONTRACTORS