JJM 2023 2024 Kottukal Grama Panchayath Supply Eerection Testing and commissioning of 1 No 400 KVA 11KV 433 V Indoor Transformer at WTP site at pongil WTP Pipeline Work

Amount

1 no 400 KVA 11KV/400 V (Indoor)Transformer at WTP site

OD200808/2023-2024:Supply & laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size direct in cable trench or in separate cable tray using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms and making good the damages colour washing etc. as required. and as instructed by engineer at site/consultant.

OD200821/2023-2024:H.T CABLE TERMINATION Supply and making indoor end terminations for 11kV grade X.L.P.E cables of the following size including supply of heat shrinkable type end sealing kit of approved make and quality with all required accessories etc. as required. Conforming for IEEE 48-1990 or IS:13573

OD200997/2023-2024:HV INSTALLATION Supply, Installation, testing and commissioning of indoor Extensible LBS Metering Panel as follows. 11KV, 26.2KA, 630A Load Break Switch with Earth Switch with HT HRC Fuses 40 Amps-3 Nos, Seal Off Bushings-1 Set, Shunt Trip Coil - 230 V AC-1 Set, CT Ratio **/5A, 15VA, Cl : 0.2S - 3 Nos, Fixed type PT of ratio 11KV/110V, 100VA, Cl:0.2 -1set, space provision for TOD meter, Space Heater with Thermostat-1 Set, 630 A Aluminium Bus bars and Support Insulators-1 Set, Door Interlock & all other accessories as required for complete installation as required and instructed by engineer in charge/consultant. ( CABLE ENTRY TOP )

OD203514/2023-2024:400 kVA 11KV/433V, 3 Phase, Vector DYN-11 Copper Wound Dry Type-Cast Resin t with Tappings From +5% to -10% in Steps of 2.5%, Operatable on Off circuit by Tap Links Provided, with HV Side Suitable for Connecting to HTSFU, LV Cable Box Suitable for 3 Runs of 3.5Core 300sq.mm 1.1kV A2XFY Cable, with Winding Temperature Indicator and All Other Standard Fittings and Accessories Confirming to IS:2026/77 & IS:11171/85. ( CABLE TOP ENTRY )

OD201048/2023-2024:TOD METER Supply, Installation, testing & commissioning of 3 phase 4 way 110V (L-L), 5A, class: 0.2S, TOD meter, of Electricity board approved make, in existing HT Metering Panel including all necessary accessories for fixing and connection complete as required getting tested and approved, providing connection/inter-connections as required for complete installation and as instructed by engineer in charge/consultant.

OD201272/2023-2024:NCT WITH VIEWBLE ENCLOSHER Neutral CT of ratio ……./5A 15VA 5P10

OD201295/2023-2024:LT CABLES & CABLE TERMINATIONS Supply, laying / clamping, testing and commissioning of the following XLPE insulated PVC sheathed armoured heavy duty power cable conductor of best conductivity aluminium/Copper 1.1kV grade strictly conforming to IS:1554 (Part-I) 1964 of the following sizes in cable trench/cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms and making good the damages colour washing etc. as required and as instructed by engineer in charge.

OD201329/2023-2024:CABLE TERMINATION Supply and making end termination with brass compression gland, earth clip and aluminium lugs/ Cu lugs for following size of XLPE insulated and PVC sheathed aluminium/copper conductor cable of 1.1kV Grade as required.

OD201330/2023-2024:LT PANELS MAIN PANEL Fabrication, supply, erection, testing and commissioning of cubicle type, dust and vermin proof, floor mounted, front operated, epoxy powder coated MV panel board made out of 14 SWG thick CRCA sheet fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as shown in the schematic drawing. Providing all connections and interconnections as required and providing all accessories as required for complete installation as instructed by engineer in charge/consultant. Digital Multi function meters of accuracy class 1, with RS485 port, necessary CT and accessories for measuring Voltage, current, kWh, KW, frequency, KVA, kVAr, PF, kVArh, Run hours, On hours, Interrupts, RPM, % Unbalance (V,A), Phase angle, THD etc. - RYB phase indicating LED lamps with control fuses and switches - 3 set. Stand by low set E/F relay using neutral CT at neutral earthing conductor - Incoming 1 No.of 630A, 50kA 4P ACB with adjustabble settings, set at 533A with , 3- O / C + 1- E / F and stand by low set earthfault release using CT at neutral inbuilt release, shunt trip, etc as incomer EB Outgoings 315A TPMCCB - 1Nos 250A TPN SFU with HRC Fuse - 4Nos 160A TPN SFU with HRC Fuse - 4Nos All MCCBs/SFUS are to be with rotary operating handle and door interlock, spreader links, terminal shroud kit, phase barrier kit etc.

Bidder Name

shibu