RKVY(12126)-Tender-2

Welding machine with tools, accessories, etc.: a) Specification of stick welding (Arc) machine: Current 200-250 Amp; AC input, MIG welder, inverter technology, auto protection against over-voltage & over-current; dust-free cooling system; upgraded duty cycle; operable on 220-240 Volt AC single phase 50 Hz; duty cycle 60%; efficiency 85%; insulation grade F. b) Tools, accessories and other machines: Other machine: Cutting machine (grinding type with 12’’ wheels), angle grinder (with 4.5’’ wheels), heavy duty hand drill machine (with 8 mm chock and drill 6 bits 3-8 mm). Tools: Screw driver set, spanner set, sliding wrench, pipe wrench, mig pliers, linesman pliers, chipping hammer, try square, forging tongs. Accessories: Welding electrodes (sticks), helmet, gloves, welding chalk, welding boots, welding cart, welding sleeves, safety glasses, metal brush.

HDPE welding machine with accessories: a) Specification: Semi-automatic hot wedge welding, suitable for thin plastic sheet or membrane with thickness of 0.10 to 1.00 mm, light weight (3.5 kg), welding speed 0.4 - 7.5 m/minute, chainless drive technology, 230-240 V, power 800 W (max.), temperature 60-480 0 C, hot welding material- SS/copper, width of weld seam 20 mm, 0.1 to 1.0 mm PE, PVC, TPO, PP.

Auto-stitch machine with tools, accessories: a) Specification: Single needle lock stitch with in-built copper winding motor, push button for half stich function and safety features (motor pulley cover finger guard & take up level guard), sewing speed 4000-500 stitch/min, number of stitch 5-20 per inch, stitch length 5 mm, press bar lift by knee (5.5/13 mm).

BRICKCELLS TECHNOLOGIES PRIVATE LIMITED

BASIC ENGINEERING SOLUTIONS

HYDRO ENERGY SOLUTION

DELTA TECHNOLOGIES