Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.5 LAdmitted-Finance 16 1 HATTHUBA SARKAR PARA JESSORE ROAD HABRA NORTH 24 PARGANAS WEST BENGAL 743269 | 743269 | L1 | Admitted-Finance | |
| 2 | L2₹62.0 L+₹8.5 L (15.9%)Admitted-Finance 57 8 1 PODDAR SYSTEM AND SERVICES P O BARISHA SANTOSH ROY ROAD KOLKATA WEST BENGAL 700008 | KOLKATA | WEST BENGAL | 700008 | L2 | Admitted-Finance | |
| 3 | L3₹71.4 L+₹17.9 L (33.5%)Admitted-Finance 77 8 SREERAMPUR ROAD PO GARIA KOLKATA 700084 | KOLKATA | KOLKATA | WEST BENGAL | 700084 | L3 | Admitted-Finance | |
| 4 | L4₹1.5 Cr+₹93.9 L (175.6%)Admitted-Finance 46 11 KESHAB SEN STREET BATTALA NIMTA KOLKATA 700049 WEST BENGAL | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700049 | L4 | Admitted-Finance | |
| 5 | L5₹1.5 Cr+₹99.3 L (185.6%)Admitted-Finance | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | PODDAR SYSTEM AND SERVICES L2 | DELTA TECHNOLOGIES L6 | SUSHAMA ELECTRONICS L3 | Sikdar Scientific Agency L4 | DIGIT-ALL L1 | MD TECHNOCRATE. L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Coefficient of friction apparatus with slider.
To determine coefficient of friction for motion on horizontal plane and inclined plane.
Angle range: 0 to 80°
02 no’s of template.
Different material specimen (03 types) | 1 | Nos | - | 6,800 ₹8,024 | 4,400 ₹5,192 Lowest | 4,800 ₹5,664 | - | 4,850 ₹5,723 |
| 2.00 | Shear Attachment for UTM
Mild Steel,
Round And Square,
05 mm to 30mm specimen dia.
Specimen set. | 1 | Nos | - | - | 5,500 ₹6,490 Lowest | 21,000 ₹24,780 | - | 19,980 ₹23,576 |
| 3.00 | Brinell Hardness tester
Test Load 0-250kgf,
HB, HRA, HRB, HRC, HV measurement.
ANALOG TYPE,
Indenter Set,
Indent microscope,
Hardness test block of MS, Al - 05 pc each. | 1 | Nos | - | 98,800 ₹1,16,584 Lowest | 1,66,000 ₹1,95,880 | 1,99,980 ₹2,35,976 | - | 3,44,980 ₹4,07,076 |
| 4.00 | Dye Penetration Test Kit
DPT Set of one cleaner, one penetrant, one developer.
Specimen set-05 No. | 1 | Nos | - | - | 4,200 ₹4,956 Lowest | 4,300 ₹5,074 | - | 4,280 ₹5,050 |
| 5.00 | Torsion Testing Machine
Max. Torque capacity 100 to 3000 Nm, 100Torsion speed, 1.5 rpm reverse, distance between grips 0-500 mm, Angle of twist (Degree)-0.1 3 phase, 440V, 50Hz, AC, motor 1 HP, Gripping dia for round bar 8-12 mm or more, Gripping for flat bar 3-10 30 mm | 1 | Nos | - | 5,40,000 ₹6,37,200 | 1,73,200 ₹2,04,376 | 1,62,998 ₹1,92,338 | - | 1,62,980 ₹1,92,316 Lowest |
| 6.00 | Closed coil helical spring Experiment Setup
Determination of modulus of rigidity, strain energy, shear stress and stiffness byload deflection method.
A set of weight. Steel rule. | 1 | Nos | - | 13,800 ₹16,284 | 67,800 ₹80,004 | 4,300 ₹5,074 Lowest | - | 4,400 ₹5,192 |
| 7.00 | Electric FurnaceMax Temp. 1200 oC
W x H x D - (12”x 12”x12”) Inch | 1 | Nos | - | 3,70,000 ₹4,36,600 | 38,800 ₹45,784 Lowest | 1,22,980 ₹1,45,116 | - | 1,23,980 ₹1,46,296 |
| 8.00 | Burden tube pressure gauge
Observation of the working principle of Burden tube pressure gauge. | 1 | Nos | - | 4,400 ₹5,192 | 12,700 ₹14,986 | 3,380 ₹3,988 Lowest | - | 3,440 ₹4,059 |
| 9.00 | La-Mont BoilerModel Study of La-Mont Boiler (water tube boiler) | 1 | Nos | - | 11,800 ₹13,924 | 7,200 ₹8,496 Lowest | 8,700 ₹10,266 | - | 8,800 ₹10,384 |
| 10.00 | Lancashire Boilers ModelStudy of Lancashire Boilers (fire tube boiler) | 1 | Nos | - | 13,800 ₹16,284 | 8,400 ₹9,912 Lowest | 11,890 ₹14,030 | - | 12,300 ₹14,514 |
Tender Value
₹1.1 Cr
EMD Value
₹35,000
Closing Date
16 Mar 2024, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
PRINCIPAL
AJC BOSE POLYTECHNIC,DEBALAYA ,BERACHAMPA
NOTICE INVITING E-TENDER FOR SUPPLY, INSTALLATION AND DEMONSTRATION OF DIFFERENT EQUIPMENTS, INSTRUMENTS, TRAINER KITS, MODELS, STUDY SETUPS ETC. FOR WORKSHOPS AND DIFFERENT LABORATORIES OF CIVIL ENGINEERING , ELECTRICAL ENGINEERING, ETCE
2023_DTET_590379_1
AJC/666/TENDER
Open Tender
Equipments
Item Wise
365 days
AJC BOSE POLYTECHNIC, DEBALAYA, BERACHAMPA
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹35,000
20 Mar 2024
12 Feb 2024
18 Mar 2024
12 Feb 2024
16 Mar 2024
12 Feb 2024
Coefficient of friction apparatus with slider. To determine coefficient of friction for motion on horizontal plane and inclined plane. Angle range: 0 to 80° 02 no’s of template. Different material specimen (03 types)
Shear Attachment for UTM Mild Steel, Round And Square, 05 mm to 30mm specimen dia. Specimen set.
Brinell Hardness tester Test Load 0-250kgf, HB, HRA, HRB, HRC, HV measurement. ANALOG TYPE, Indenter Set, Indent microscope, Hardness test block of MS, Al - 05 pc each.
Dye Penetration Test Kit DPT Set of one cleaner, one penetrant, one developer. Specimen set-05 No.
Torsion Testing Machine Max. Torque capacity 100 to 3000 Nm, 100Torsion speed, 1.5 rpm reverse, distance between grips 0-500 mm, Angle of twist (Degree)-0.1 3 phase, 440V, 50Hz, AC, motor 1 HP, Gripping dia for round bar 8-12 mm or more, Gripping for flat bar 3-10 30 mm
Closed coil helical spring Experiment Setup Determination of modulus of rigidity, strain energy, shear stress and stiffness byload deflection method. A set of weight. Steel rule.
Electric FurnaceMax Temp. 1200 oC W x H x D - (12”x 12”x12”) Inch
Burden tube pressure gauge Observation of the working principle of Burden tube pressure gauge.
La-Mont BoilerModel Study of La-Mont Boiler (water tube boiler)
Lancashire Boilers ModelStudy of Lancashire Boilers (fire tube boiler)
Power plant Model With trace the path of flue gas and water-steam circuit of boiler, air – coal dust – flue gas path &condensing unit. With mounting and accessories (Economiser, Superheater, Air Preheater, Valves etc.).
screw type Air compressor cut section model
Centrifugal air compressor Cut Section Model
Hermetically sealed compressor cut out modelIdentification of various components of hermetically sealed compressor and demonstrate its working.
Shell & Tube type Heat Exchanger and Plate Type Heat Exchangers cut section modelStudy and compare Shell & Tube type Heat Exchanger and Plate Type Heat Exchangers using cut section model.
Spirit Level Accuracy: 0.5 mm Length 40cm
Outside Vernier micrometer .0-25mm, 0.001 mm, Specimen of 03 different size.
Slip Gauge SetSlip Gauge Set 83 pcs with a fine hair brush and a dry pad to clean it.
Vernier caliper Range- 0-25mm, Specimen of 03 different size.
inside micrometer Measurement of unknown bore diameter of given hollow jobs by using inside micrometer. Range- 0-25mm, Specimen of 03 different size.
Plug Gauge Insize 30 mm H7 Go/No-Go Plain Plug Gauge. Specimen.
Fillet Gauge Accuracy: ±0.5 mm, Size (mm): 3, 4, 5, 6, 8, 9, 10, 11, 12, 14, 16, 19, 22, 25 Included 7 blades Specimen
Analog Tachometer 0 to 10000 r.p.m
Impulse steam turbine Sectional Model Study with suitable model the working of impulse steam turbines.
Impulse water turbine sectional Model Study with suitable model the working of impulse type of water turbine
Gas turbine sectional model Study with suitable model the working of gas turbine
Valve timing diagram Conduct Valve / Port timing diagram of an IC engine.
CNC Simulator 15 user pack, Simulation for CNC Mill, CNC Lathe etc..
Hydraulic Test Bench Flow measurement by Venturimeter Flow measurement by Orifices meter Pipe Friction Apparatus Reynolds Apparatus.
Single Stage Centrifugal Pump Test Rig Phase : single phase Voltage : 230V Material : Stainless Steel Sump Tank Capacity : 150 litres Frequency : 50Hz Pump : 1 HP Motor : 1HP,AC
Ultrasonic Machining (USM) Model the working principle and setup of Ultrasonic Machining (USM) for demonstration purpose and also prepare a detailed study report on working principle, setup, process parameters, advantages, limitations and applications ofUltrasonic Machining (USM).
Electrochemical Machining (ECM) Modelworking principle and setup ofElectrochemical Machining (ECM) for demonstration purpose and also prepare a detailed study report on working principle, setup, process parameters, advantages, limitations and applications of Electrochemical Machining (ECM).
8 KVA 100% Copper Spot Welding Machine With Timer Rated Input Power : 8 KVA Usage/Application : Industrial Automation Grade : Semi-Automatic Voltage : 230 V
Small Bench Drill Machine16mm chuck, 500 W motor, 2350 rpm, 9 speed
Professional Angle Grinder For Metal Work Power Input 1400 W, No load speed 11000 rpm, wheel diameter 125 mm
Cordless Impact Drill Machine Battery power 18 V, Chuck Maximum Size 1/2", 1700 rpm, 850 W
Heavy duty Corded Electric Metal cutting saw Heavy duty Corded Electric Metal Cutting Saw 14", 2400 W, 355 mm Cutter Diameter, 3800 rpm
Arsenic Test kit ,Standard Specifications
Magnetic stirrer bid (2.5cm and 5cm) ,Standard Specifications
EDTA- Disodium salt ,(extra pure AR, 500gm )
Erichrome Black-T ,( AR, 25gm)
Acetone ,(AR, 2.5lit)
Oxalic Acid (AR, 500gm) ,Standard Specifications
Sodium Hydroxide pellets ,(LR, 500gm)
KOH ,(LR, 500gms)
Distilled Water ,Standard Specifications
Sodium Bicarbonate ,(LR, 500gm)
Phenolphthalein 1% Indicator Solution , (Plastic Bottle, 500gm)
0.1 M KCl Conductivity Standard ,(Conductivity: 12.9 mS, 500 ml)
Potassium Dichromate ,(AR, 500 gm)
Potassium Permangate ,(AR, 500 gm)
Conc. Sulphuric Acid (LR, 500ml) ,Standard Specifications
Conc. Nitric Acid (LR, 500ml) ,Standard Specifications
Conc. Hydrochloric Acid (LR, 500ml) ,Standard Specifications
Sodium Thiosulfate Pentahydrate (AR, 500 gm) ,Standard Specifications
Potassium Iodide (LR, 500 gm) ,Standard Specifications
Potassium Chloride (LR, 500 gm) ,Standard Specifications
Starch Soluble (AR, 500 gm) ,Standard Specifications
Ammonium Chloride (LR, 500 gm) ,Standard Specifications
Liquor Ammonia (AR, 2.5 lit) ,Standard Specifications
Ethanol (LR, 500 ml) ,Standard Specifications
Manganese(II) sulfate monohydrate (AR, 500 gm) ,Standard Specifications
Bunsen Burner ,Standard Specifications
Filter Paper (12.5 cm) ,Standard Specifications
Glass Dropper (10 ml Pack of 6) ,Standard Specifications
Watch glass (75 mm) ,Standard Specifications
Glass stirring rod ,Standard Specifications
Tissue Roll ,Standard Specifications
Boyle’s law apparatus Complete set: Burette graduated in cc (or ml) with 1.0 cc / div. Scale graduated on both sides (left & right) with same marking. Both open and closed tubes can be slided up and down over aluminium rod. High quality synthetic tube (1.0 m long). One spare synthetic tube. (With extra 500gm mercury).Installation and demonstration.
Complete set to find the coefficient of friction between wood and glass using a horizontal board. i)Horizontal wooden board with glass top, fitted with pulley at one end, ii)Wooden block (with slots on top for weight) with fixed hook at one end, iii) Weight hanger with hook, iv) Slotted weight (10 no. each of 20 gm). Installation and demonstration required.
Complete set to determine the force constant of a spring using Hook’s law. i)Retort stand with clamp, ii)Spring with hook at both ends, iii)A vertical wooden scale, iv)A fine pointer, iii) Weight hanger with hook, iv)Slotted weight. Installation and demonstration required.
Complete set to find the moment of inertia of a flywheel. i)Flywheel with shaft, ii)Weight hanger, iii)Slotted weight and other accessories .Installation and demonstration required.
Complete set to find the co-efficient of linear expansion of the material of a rod. Pullinger’s apparatus with thermometer and all other accessories to perform the experiment. Installation and demonstration required.
Physical Balance High Precision open beam physical balance. Divided glass door. Teak wood frame with glass window. Capacity 250 gms; Weight Box: 2mg to 500 mg, 1gm to 100 gm. Installation required.
Complete set to determine and verify the time period of oscillation of a cantilever. i)Meter scale (wooden 2 no.), ii)G Clamp (metallic), iii)Slotted weight (5 nos each of 50gm), iv)Slotted weight holder with hook (metallic) and all other accessories. Installation and demonstration required.
Complete set to verify inverse square law of radiations using a photo-electric cell. i)Photo cell (Selenium) (Mounted in the metal box with connections brought out at the terminals, ii)Lamp holder with bulb(60W bulb), iii)Moving coil analog micro-ammeter mounted on the front panel and connections brought out at terminals (Range :0 to 500μA), iv)Moving coil analog mili voltmeters mounted on the front panel and connections brought out at terminals (Range:0 to 1000mV), v)Wooden bench fitted with scale and connecting wire (standard, 1coil) and all other accessories. Installation and demonstration required.
Complete set to study the dependance of capacitance of a parallel plate capacitor on various factors and determine the permittivity of air at a place. Complete set with all necessary accessories. Installation and Demonstration required.
Standard resistance, Teak wood box. Double winding coil of values 5, 10, 20 ohm. (4 pieces of each)
Resistance Box (1 Ohm – 500 Ohm) Manganim wire, plug type, Non-inductive winding
Table voltmeter (DC) Table type analog. Permanent magnet moving coil type. Bakelite case. Size: 250 mm x 200 mm. Anti-parallax mirror scale, knife edge pointer, square dial. 0 to 5 volt
Table voltmeter (DC) Table type analog. Permanent magnet moving coil type. Bakelite case. Size: 250 mm x 200 mm. Anti-parallax mirror scale, knife edge pointer, square dial. 0 to 500 mV
Table ammeter / milli ammeter (DC), Table type analog. Permanent magnet moving coil type. Bakelite case. Size: 250 mm x 200 mm. Anti-parallax mirror scale, knife edge pointer, square dial. Range: 0 to 500 mA.
Variable Power supply, IC regulated. o/p: 0 to 12 V/ 0 to 2A. Voltage should be increased by maximum 2volt step
Fortin’s Barometer, Complete brass made.Open plate reflectors, ring and screws for vertical adjustments.A dual scale graduated in 25 to 32 inches and 64 cm to 81cm is read by verniers moving by rack and pinion,reading to 0.01 inch and 0.1mm are enclosed in a glass cylinder.A glass cistern at the lower end of barometer is provided with an ivory point to adjust the level of mercury. Mounted on a wooden base. Covered with glass case. A thermometer is provided on the wooden base. Supplied with mercury.Installation required.
Screw Gauge (Micrometer) Screw pitch: 0.5mm Least Count 0.01mm (Mitu-Toya make)
IS: sieve no-( 80 mm, 63 mm, 50 mm, 40 mm, 31.5 mm, 25 mm, 20 mm, 16 mm, 12.5 mm, 10 mm, 6.3 mm, 4.75 mm, 2.36 mm, 1.7 mm. 1.18 mm, 600 micron, 300micron, 150 micron, 75 micron,) IS : 2386 ( Part I ) – 1963, IS: 383 - 1970
Rebound hammer IS-13311 (Part 2):1992 (Reaffirmed- May 2013) “Non Destructive Testing of Concrete-Methods of Test
Vicat's apparatus 1. Measuring cylinder 2. Stop watch 3. Glass plate 4. Enamel tray Determination of Consistency. initial and final setting time of fresh concrete. As per IS: 3025: 1984 (Part 10)
Impact Testing instrument To determine AIV of coarse aggregate As per IS 9377 (1979)
Los Angeles abrasion testing instrument To determine hardness of aggregate. As per IS 2386-4 (1963)
Thickness Gauge & Length Gauge • To determine Flakiness Index Coarse aggregate Reference: IS 2386(Part 1): 1963 To determine Elongation index of coarse aggregate Reference: IS 2386(Part 1): 1963
UTM To determine the tensile strength of the instrument Range : 2000 kg (2 ton) Least Count : 0.2 kg (0.0002 ton) Speed: Variable 50 to 500mm/min Traverse : 25mm to 900mm. Motor : 2 Hp, 1425 rpm, Induction motor Power : 220VAC, 50HZ, 2000 W, Three phase
CBR Testing Instrument To determine CBR OF Soil Usage/Application Soil Testing Equipment Material Mild Steel Capacity 5 Ton Operation Type Both Hand Welded Speed 1.25mm/min
Mild steel Electric Heating Mantle For boiling and heating of samples
To determine residual chlorine in a given sample of water (Chlorine Test Kit) • Burette Pipette type • Determination of Chloride content of potable water • Maximum permissible type: 1000 ppm • Portable
To determine the dissolved oxygen(D.O) in a sample of water • Determination of DO content of Potable water • Type: Digital • As per IS 3025: 1989 (Part 38)
Ring & Ball Apparatus Electrically operated, A.C motor as per IS 1205: 2022
Hardness test kit As per IS 3025-21 (2009) To determine hardness of water
Digital Turbidity meter As per IS 3025 To determine turbidity
Digital DO meter IS 3025 (Part 38): 1989 To determine DO content of sample
Desiccators Vacuum type desiccator with glass stopcock and lid (connector for 8 mm inner diameter tubing) To dry the reactant
Digital pH meter Display: 3 ½ Digit LED Range: pH mV -°C: 2.00 to 20.00 , 0 to ±1999 Temperature Compensation: Manual : 0 to 100°C Input Impedance: > 10 ohms Slope control: 80 – 120% Sensor: Combined pH Electrode Power: 12V DC using 230V + 10% AC Dimensions: 270 x 202 x 80 mm (l x b x h) Weight: 0.8 Kg approx. Accessories: Combination pH Electrode * Buffer Tablets 4 pH & 7 pH * Operation Manual Buffer Bottles (4 & 7 pH) * Dust Cover * Electrode Stand To determine pH of sample
BOD INCUBATOR • To measure BOD Type: Temperature Range : 10°C to 60°C Accuracy : ± 0.5°C, Temperature Uniformity : ±1.0°C, Temperature Suitable for 18 -24°C, 20-25°C, 30-35°C, 35-37°C, 40-45°C & 55-60°C
To determine C.O.D. of given sample of waste water Online Analyzer (BOD, COD, TSS, PH) • Determination of C.O.D content of water • As per IS 3025: 2006 (Part 58)
Pensky Martens Apparatus • Determination of Flash & Fire point of bituminous sample. 220/230 volts, 50Hz
To verify the Mesh Analysis and Node Analysis using independent and Controlled Source. to measure Resistance (0-40 MΩ), Voltage (0- 600 V DC/ 0- 600 V AC), Current (0-10 A DC/ 0-10 A AC), Capacitance (0-1000μF), Accuracy- ±1.5 %, (CAT III 600 V safety rated), TL75 test leads including 2AAAbatteries.
To verify Thevenin’s and Norton’s theorems, Variable DC Power Supply 1.2V to 12V/500mA. Load Resistor, Variable Current Source, Resistive Network of Thevenins and Nortons Equivalent Circuit. User Manual with digital meters for input and output.
Power Factor Meter Single Phase Load: Single Phase Current Coil: 0.5/1A, 1/2A, 2.5/5A, 5/10A, 10/20A Potential Coil: 62.5/125/250V, 75/150/300V, 125/250/500V, 150/300/600V
Wattmeter Single Phase Single Element: Any single Current Range [AMP] 0.5A to 20A; Any Single Voltage Range 50 to 600V [VOLT], 4A X 250V,5A X 250V,4A X 5000V, 5A X 500V,12A X 250V, 10A X 5000V 1000W, 1250W, 2000W, 2500W, 3000W, 5000W Any One Current Range 0.5A to 20Amp; Any Two Voltage Range 5A X50/100V, 10A X150/300V, 250/500V, 150/500W, 1500/3000W, 2500/5000W,750/1500W Any Two Current Range 0.5/1A, 1/2A,2.5/5A, 5/10A, 15/30 A (Amp.); Any Two Voltage Range 75/150V, 125/250V, 250/500V, 150/300V, 300/600V, 1/2A X 75/150V = 75/150W, 150/300W, 5/10A X 150/300V = 750/1500W, 1500/3000W Any Two Current Range 0.5/1A, 1/2A,2.5/5A, 5/10A, 15/30 A (Amp.); Any three Voltage Range 75/150/300V, 125/250V, 125/250/500V, 150/300/600V, 1/2A X 75/150/300V = 75/150/300W, 5/10A X 150/300/600V = 750/1500/3000W, 1500/3000/6000W
Digital Multimeter To measure Resistance (0-40 MΩ), Voltage (0- 600 V DC/ 0- 600 V AC), Current (0-10 A DC/ 0-10 A AC), Capacitance (0-1000μF), Accuracy- ±1.5 %, (CAT III 600 V safety rated), TL75 test leads including 2AAAbatteries.
To verify Thevenin’s and Norton’s theorems Variable DC Power Supply 1.2V to 12V/500mA. Load Resistor, Variable Current Source, Resistive Network of Thevenins and Nortons Equivalent Circuit. All Inputs/Outputs through 2mm Sockets. Set of Patch Chords & User Manual with digital meters for input and output.
To verify Maximum Power Transfer theorem. DC Power Supply 5V to 12V/500mA. Variable Load Resistor Resistive Network All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User Manual with digital meters for input and output.
To verify Superposition theorem. Dual Variable DC Power Supplies 1.2V to 12V/500mA Resistive Network All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User Manual with digital meters for input and output.
Test Setup / Trainer Kit. To Construct full-wave rectifier circuit & to draw input, output waveforms – with filters and without filters.Consist of:-12-0-12 ac supply, 4 nos 1N5408 diode, digital V & Ammeter. L, C filter
Test Setup / Trainer Kit. To Plot the characteristics of Zener diode and to find the breakdown voltage. Consist of:-12-0-12 ac supply, 2 nos Zener diode, digital V & Ammeter.
Test Setup / Trainer Kit. To Plot the input & output characteristics of a BJT in CE or CB mode. with three digital meter
Test Setup / Trainer Kit. To Construct Relaxation Oscillator using UJT and observe output waveform by CRO.
RC phase shift Oscillator Circuit Kit. RC phase shift Oscillator Circuit Kit to measure its' frequency of Oscillation.
Test Setup / Trainer Kit. To Construct a ±12V power supply and to observe the output waveform by CRO with and without filter circuit. Also observe the output voltage using IC regulator 78XX & 79XX.
Test Setup / Trainer Kit Related Original 74xx series Ics To Realization of Half Adder, Full Adder, Half Subtractor and Full Subtractor
Test Setup / Trainer Kit Related Original 74xx series Ics For verification of the function of SR, D, JK and T Flip-flops.
Test Setup / Trainer Kit Related Original 74xx series Ics To Realization of Encoder and Decoder circuit.
Test Setup / Trainer Kit Related Original 74xx series Ics For Realization of Multiplexer and Demultiplexer circuit
Test Setup / Trainer Kit Related Original 74xx series Ics For Construction of binary Asynchronous or Synchronous counter
Test Setup / Trainer Kit Related Original 74xx series Ics For Construction controlled shift register & verify SISO, SIPO, PISO, PIPO operation.
Test Setup / Trainer Kit For Implementation of D/A converter and A/D converter using trainer kit.
Digital Multimeter, 10+2 digits 3&3/4 digit digital multimeter with F & C measurement Make: Metravi, model: XB33CF
Kelvin’s double bridge for measurement of low resistance. Single Phase 230 Volt 50 hz.
Megger for measurement of insulation resistance. (Hand Driven) 100 - 5000 V, 160 RPM
Megger for measurement of insulation resistance. (Digital) 600V -20 A,2 KW, 600 RPM
Inductance measurement using Anderson bridge. Operating Supply Voltage, 220 V AC, 1 khz, 0-20 v p-p
Control the speed and reverse the direction of the DC servo motor Study of a d.c. motor angular position control system u Compact system - no mechanical hassles u Simplified operation u mP based storage of response u Positive/Negative tachogenerator feedback MAKE: TI-SES
Control the speed of DC shunt motor above & below rated speed & draw the speed characteristics. CONSIST OF- (2 METHODS) DC SHUNT MOTOR 0.5 HP--------1 NO 01) Slide field & armature rheostat,----2pcs 3 POINT STARTER 2HP………..1 NOS. 02) 2 AMP VARIAC FOR DC FIELD SUPPLY.01 NO 4 AMP VARIAC FOR DC ARMATURE SUPPLY…..01 NO DIGITAL METERS VOLTMETER..2 NOS AMMETER………….……………..2 NOS DIGITAL PANEL TACHO. WITH PROXY SENSOR……1 SET WITH MCB PROTECTION
Perform the brake test on DC series motor. DC Series Motor: 220V DC, HP, 20A, 1500RPM, DPST Switch(1) Voltmeter: 220V Dc Ammeter:20A(Dc) 2-Point Starter Pully belt with spring balance arrangement CONSIST OF DC SERIES MOTOR 1 HP, 220V, 1500 RPM….01 WITH BRAKE PULLEY ARRANGEMENT. DIGITAL METERS MAKE CABS:- AMMETERS…………….01NOS, VOLTMETERS………….01NOS DIGITAL PANEL TACHO. WITH PROXY SENSOR……1 SET LOAD SW & I/P O/P ISOLATOR. LAMP LOAD 5 PCS. INCLUDED DC POWER SUPPLY VARIABLE BY VARIAC 4A FOR MOTOR WITH MCB PROTECTION
Compute the efficiency of a D.C. motor by Swinburne’s test. Dc motor: Shunt type, 2 HP, 220v(dc), 8Amp, 1800 RPM with prony break loading. All digital Meters.Note: All meters will be mounted on a white panel Board. According to the circuit diagram on the panel, All Terminals of the Motors, Starter& Power Supplies etc will be brought out on the Panel for flexible connection with connecting patch cord. Wooden insulated cabinet & back side net window with white Panel board & circuit diagram
Check the functioning and testing of pulse transformer 1:1:1 & 1:1 pulse transformer, Inbuilt pulse generator Output to DSO/CRO
Compute the efficiency of a single-phase transformer by Back-to-Back tests. Transformer: 1KVA, 230V(2nos) Voltmeter: 0-75V(1) Voltmeter: 0-300V(1) Voltmeter: 0-600V(1) Ammeter:0-20A(1) Ammeter:0-2A(1) digital Wattmeter: 8 Amp 250Volt. SPST Switch:1 Autotransformer(variac): 8, 230V, 1phase(1) All digital meters
Digital Multimeter • Display, liquid Crystal Display (LCD) • Maximum display : 6000 (5 5/6) Counts Automatic Polarity Display • Measurement : Double Integral A / D Conversion • DC Voltage : 6V/60V/600V/1000V • Accuracy : ± (0.5%+3) • AC Voltage TRMS: 6V/60V/600V/750V • Accuracy : ± (0.8%+3) • DC Current : 600uA/6000uA/60mA/600mA/6A/10A • Accuracy : ± (1.2%+10) • AC Current : 600uA/6000uA/60mA/600mA/6A/10A • Accuracy : ± (1.2%+10) • Resistance : 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/40MΩ • Accuracy : ± (0.8%+3) • Capacitance : 60nF/600nF/6uF/60uF/600uF/6mF/30mF • Accuracy : ± (3.5%+20) • Frequency : 10Hz/100Hz/1kHz/10kHZ/100kHz/1MHz/20MHz • Accuracy : ± (0.1%+3) • Temperature : (-20-1000 )˚C • Accuracy : ± (1.0%+5) • Data Hold
230 Volt Single Phase Variable Auto Transformer (Variac) 230V, Single phase, 20A COVER TYPE
Digital Non-Contact Tachometer. Digital Non-Contact Tachometer cum Digital Counter 2-99999 RPM • Non-contact type Tachometer and Counter • Provides fast and accurate Non-contact RPM and surface speed measurements of rotating objects. • Uses the CPU technique, photo-electrical technique, and junction laser technique for one instrument combined PHOTO TACHOMETER (RPM & REV). • RPM Test Range: 2 to 99,9999 RPM • Count Range: 1 to 99,9999 • Accuracy: ±0.05% ±1 Digit • Resolution: 0.1 RPM up to 1000RPM else 1 RPM • Sampling Time: 0.5 seconds (Over 120 RPM) • Detecting Distance: 50mm to 500mm • Two test modes: Rotation speed mode (unit: RPM) and count mode (unit: REV) • Wide measure range and high resolution • Display: 5 digits large Backlit LCD • Built in memory recall Max. Min. & Last value Stored.
Control the speed and reverse the direction of the AC servo motor Study and analysis of a a.c. servo motor torque speed characteristics Torque computation through electrical loading • Determination of motor parameters - inertia and friction • Digital display of time constant • Transfer function evaluation
Control the speed and reverse the direction of the stepper motor Stepper motor with driver circuit. Auto & Manual pulse generation. Forward & revarse direction rotation. Study the function of Stepper motor winding. Visual LED effect of pulse movement. Make: CALTEK
Determine the regulation and efficiency of the given three phase alternator from OC and SC tests (Synchronous impedance method) Specification:- Synchronous Machine, 1KVA, 415V, Star connected, 1500 RPM, 50Hz,220V excitation, coupled with Drive: DC Motor, 2 HP, 220V, Shunt type, 1500 rpm. - INDIVIDUAL VARIABLE VARIAC CONTROLLED DC POWER SUPPLY. - PROTECTED DC MOTOR ARMATURE FOR FIELD LESS SUPPLY. digital panel mounted MULTIFUNCTION meter for Wattr, Amp, Volt, PF, Frq etc. for 3ph circuit & node. RPM meter: Digital panel type rpm meter with proximity sensor, Suitable loading arrangement for the experiment. Complete control panel with Isolator, Indicator and fuse MCB protection Note: All meters will be mounted on a white panel Board. According to the circuit diagram on the panel, All Terminals of the Motors, Starter& Power Supplies etc will be brought out on the Panel for flexible connection with connecting patch cord. Wooden insulated cabinet & back side net window with white Panel board & circuit diagram
Perform the direct loading test on the given three phase alternator and determine the regulation and efficiency. Specification:- Alternator1KVA, 415V, Star connected, 1500 RPM, 50Hz,220V excitation, coupled with Drive: DC Motor, 2 HP, 220V, Shunt type, 1500 rpm. - INDIVIDUAL VARIABLE VARIAC CONTROLLED DC POWER SUPPLY. - PROTECTED DC MOTOR ARMATURE FOR FIELDLESS SUPPLY. digital panel mounted MULTIFUNCTION meter for Wattr, Amp, Volt, PF, Frq etc. for 3ph circuit & node. RPM meter: Digital panel type rpm meter with proximity sensor, Suitable loading arrangement for the experiment. Complete control panel with Isolator, Indicator and fuse MCB protection Note: All meters will be mounted on a white panel Board. According to the circuit diagram on the panel, All Terminals of the Motors, Starter& Power Supplies etc will be brought out on the Panel for flexible connection with connecting patch cord. Wooden insulated cabinet & back side net window with white Panel board & circuit diagram
Conduct the direct load test to determine the efficiency and speed regulation for different loads on the given single-phase induction motor; plot the efficiency and speed regulation curves with respect to the output power. Specification:- Single phase Squirrel Cage Induction Motor , 1 HP, 220V, 1460rpm, with capacitor start & centrifugal switch(with block rotor arrangement) Digital Panel mounted ACWattmeters, Ammeters & Voltmeter in circuit. Single phase Auto Transformer,4A. 230V, 50hz Wattmeter, Voltage: 0-300V, Current: 0-5A, . Load: Mechanical spring balance type loading arrangement on Motor side– 1 set Complete control panel with Isolator, Indicator and fuse MCBprotection
Measure the open circuit voltage ratio of the three-phase slip ring induction motor and perform the speed control by insertion of resistance in the rotor circuit for the slip ring induction motor. Specification:- Slip Ring / Wound Rotor Induction Motor, 2 HP, 415V, 50hz, 1450rpm directly coupled with DC Shunt Generator, 1 kW, 220V, 1500 rpm - INDIVIDUAL VARIABLE VARIAC CONTROLLED DC POWER SUPPLY. DOL STARTER – 1 no GANG RHEOSTAT ……… 1 SET Lamp load Digital Wattmeter, Digital Ammeters &VoltmetrsPanel mounted in each circuit & node. Complete control panel with Isolator, Indicator and fuse, MCB protection
Control the speed of the given three phase squirrel cage induction motor using the applicable methods: i) autotransformer a. Voltmeter, rating-(0-500VAC), type: Digital-l, -------1pc. b. Ammeter, Rating-(0-2A AC),Type Digital ----1pc. c. 3 PH watt meter (2000 w) Digital --- 1pc. d. AC3PH square cage Induction motor 1 HP------01pc with Mechanical Loading Arrangement e. 3 PH 2 Amp variac…--------1pc. f. DOL starter, rating – 1HP, AC, ----1pc. g. PH changeover sw---------1 pc. h. digital tachometer(0-9999)rpm-PANEL MOUNTED--------1 pc
Cut Model of Single phase Induction motor 0.5 hp Cut Section Of AC Single Phase SQ Cage Induction Motor
Cut Model of Three phase Induction motor Cut Model Of Three Phase 2 HP Slip Ring Motor, Voltage: 415V, 1440RPM
Wire: 2.5 Sq mm PVC Copper House Wire 2.5 Sq mm PVC Copper House Wire 90 mtr
Wire: 4 Sq mm PVC Copper House Wire 4 Sq mm PVC Copper House Wire
Wire Cutter (normal)
Screw driver set
Electric tester (NORMAL)
Electronic continuity tester NORMAL
AC single Phase Loading arrangement. i)To Test HRC fuse by performing the load test. (ii)To Test MCB by performing the load test.CONSIST OF:-0 TO 20 AMP (PHANTOM LOAD) CURRENT SOURCE.DIGITAL PICK HOLD AMMETER. 5 AMP FUSE WIRE.ALL SHOULD BE FABRICATED IN A WOODEN CABINET
HRC Fuse 6AX10, 16AX5, 32AX5
MCB 6AX5, 16AX3, 32AX2
MCCB (6A or 16A or 32A) To Dismantle MCCB/ RCCB and identify various parts.
Test Setup / Trainer Kit. Demonstrate the operation of single phasing preventer by creating single phasing fault for a given3-ph. induction motor with D.O.L. starter.CONSIST OF:- 1 HP 3 PH SQ CAGE MOTOR WITH DOL STARTER 1 PHASING FAULT SIMULATION. SHOW THE LOADING EFFECT OF 2 PH SUPPLY.DIGITA; 3 NOS AMMETER
Transmission line protection Simulation Kit To Simulate transmission line protection by using the impedance relay /over current relay for various faults. (On transmission line protection simulation Kit).CONSIST OF:- SIMULATED DIGITAL IMPEDANCE RELAY. 2 PHASE SUPPLY NORMAL LOAD FAULT CREATION FACILITY. VARIAC 4 AMP MAKE: CALTEK
Model of Lighting Arrester To Study different lightning arresters and identify different parts.CONSIST OF:- 10KV LOW CURRENT SOURCE MINIMUM 3 TYPES OF ARRESTER, EFFECT GENERATION STUDY.
Model of ACB/VCB To Study of ACB/VCB and identify different parts.
SMPS trainer kit 5,12,24 VDC
R, C in R and RC triggering circuits on firing angle of SCR. 20V, 50 Hz
SCR commutation circuit Supply required 230V, 50Hz AC. Built-in IC based DC Regulated Supply and LED indication for supply “ON”.
Half wave-controlled rectifier with resistive load 15-0-15 v isolated power supply , 50 Hz
Cut section model of Water Turbine Standard Study Model with various components
Set up to Perform experiment to plot I-V characteristics of photovoltaic cell module and find out the solar cell parameters (O.C. voltage, Short circuit current, Voltage-current-power at Maximum Power point, Fill factor, Efficiency). Solar PV panel:12V, 50W, MONO PERC Solar Panel, Max Power(Pmax)=50Wp, Max Power Voltage(Vmp)=20V, Max Power Current(Imp)=2.51A, Voc=22.5V, Isc=2.65A, Max system voltage=600V. Rheostat:500W, 0-100Ω, wire wound, Digital Multimeter as voltmeter: 0-1000 V DC, 750 AC, 0-10A Ammeter: PMMC type, 0-5 A DC
Observe the effect on speed of the given D.C. separately excited motor by varying voltage using step down chopper. 230 V AC, 230 V DC
Observe the effect on speed of the given D.C. separately excited motor by varying voltage using step down chopper. 230 V AC, 230 V DC
Control the speed of the given separately exited motor by changing the firing angle of SCR using single phase full converter and measure the speed Voltage (0-300V) & Current Measurement (0-10A)2) Digital RPM counter, Double Pole MCB,Type: DC Motor, separately excited, screen protected, horizontal foot mounted, fan cooled, Capacity: 1HP, Winding: Shunt wound, R.P.M.: 1500, Volts. : 230,Insulation: Class 'B', Armature and field sockets
Observe the effect on speed of the given D.C. separately excited motor by varying voltage using step down chopper. 100 - 5000 V, 160 RPM
Set up to perform the testing of dc series motor to obtain i) torque vs current; ii) speed vs current; iii) speed vs torque characteristics. DC Series motor With Loading Arrangement 1HP, 230V, DC & 1500 RPM. Motor should be copper wound with class b insulation. It should be supplied with one MS powder coated Electrical panel fitted with high insulation Bakelite sheet. Analog ammeter and voltmeter should be provided on the front panel sheet. On board DC power supply to operate the DC series motor. Short Circuit protection with the MCB. 2 Point starter to records the reading of armature resistance. 1 Nos. rheostats to control the speed of dc series motor. 4mm terminals to make connections. Supplied with complete operating instruction manual.
Model of Power Circuit of AC locomotive Standard Study Model with various components
Model of different types of Nuclear Reactor used in nuclear power plant Standard Study Model with various components
Model of different types of Boiler used in coal based thermal power plant Standard Study Model with various components
Megger To Test wiring insulation using megger.
Earth Megger/ Earth Tester To Measure earth resistance using earth megger 0-100 Ohms with tool kit set
Static Energy Meter (TV METER) For Measurement of three phase energy using static energy meter which can show maximum demand, reactive power, TOD in addition to active power.
CT and PT Test &Trainer Kit. For Measurement of energy using CT or CT and PT.CONSIST OF:- ACTUAL LOAD OF 100WX5 WATT LAMP LOAD 50:5:5 CT & 250:50 PT DIGITAL AMMETER X 2, VOLTMETER X 2, MULTIFUNCTION METER X1 PHANTOM LOADING FACILITY. MAKE: CALTEK
Smart Meter (Energy) To Study of Smart Meter and associated system for commercial building / complex. CONSIST OF:- MULTIFUNCTION SMART METER WITH RS-485 MODBUS PROTOCOL & LOGGING SOFTWARE. COMPLEX CONNECTION NETWORK. DIGITAL METERS ETC FULL SET.
Auto-CAD software having Electrical Tools as per IS 2032
Reduced voltage running up test Setup To Perform reduced voltage running up test on three-phase Induction motor as per I.S.325.CONSIST OF 1HP 3 PH SQ CAGE MOTOR WITH PRONY MRAKE. V/F UNIT.3 PH 2AMP VARIAC DIGITAL V & AMMETER
Different types of fire extinguisher. To Study of different types of fire extinguisher 3 TYPES OF FIRE EXTINGUISHER IN SEMI CLOSE CONDITION WITH 1 SET OF EACH IN LOOSE CONDITION.
Digital Multimeter DC Voltage:400mV to 1000V, AC Voltage: 400mV to 1000V, DC Current: 4mA to 10A, AC Current: 4mA to 10A, Resistance: 100 ohm to 40Mohm, Resistance: 100 ohm to 40Mohm, Capacitance: 4nF to 200µF, Duty Cycle: 0.1% to 99.9%, Frequency: 10Hz to 10MHz, Temperature: 20oC to 750 oC, Transistor Test: Yes (for NPN & PNP), Diode Test: Yes, Continuing Buzzer: Yes, Power Supply: 9V, Manual and Auto ranging, Display: 4½ Digit
Variable DC Power Supply Dual Supply, 0V to 30V ,2A ; ±3 to ±15v ,1A; 5v, 5A fixed, Digital Display.
Diode Trainer Kit Mains Power: 230 V AC, 50 Hz, Variable DC Power Supply 0V to 12V/500mA DC Power Supply for DPM 5V/500mA, Diodes: IN4001 to 4007, DR25, BY127, Zener Diodes: 3.9VZ, 5.1VZ, 8.2VZ Digital Meters for Measuring Voltage and Current Provision for Add on Components. All Inputs/Outputs through 2mm Socket with provision of Digital Multimeter for measuring input and output
To study the output waveform of push-pull amplifier for Class-A, Class-B & Class-AB operations DC Power Supply Fixed: +12 V, -12 V, +5 V, -5 V In built Sine Wave Generator with Frequency : 10 Hz- 100 KHz, Amplitude : 0 to 5 V pp
MOSFET characteristics Trainer kit Dual Variable DC Power Supplies 0V to -5V/500mA and 0V to 12V/500mA DC Power Supply for DPM 5V/500m, One Gate and Drain Resistor, MOSFET (say 3N187), Digital Meters for Measuring Voltage and Current, Set of Patch Chords & User Manual.
Shunt and series regulator trainer kit for following plots: line regulation and load regulation Variable DC Power Supply 1.2V to 12V/500mA Variable Load Resistor, Transistor Series Voltage Regulator Circuit and Transistor Shunt Voltage Regulator Circuit. All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User Manual
To study the V-I characteristics of UJT Trainer kit. Variable DC Power Supply 1.2V to 12V/500mA DC Power Supply for DPM 5V/500mA UJT (2N2646) UJT Characteristics UJT Relaxation Oscillator with two different Timing Capacitors, Digital Meters for Measuring Voltage and Current, Set of Patch Chords & User Manual
Feedback Amplifier Trainer 12 V DC supply with +/- 10% accuracy, configurable circuit, Inbuilt sine wave generator with frequency range 10 Hz to 10 KHz range and Amplitude variation 10mV to 4V, NPN transistor. Voltage Series & Shunt and Current Series & Shunt configurable operation.
To study the waveform of UJT as relaxation oscillator. Two DC IC Regulated Power Supplies 0-15VDC/150mA & 0- 30VDC/150mA.Three Digital meters for voltage & current measurement. One UJT 2N2646 mounted behind the panel.
To study the characteristics of IC555 timer connected as: a) astable multivibrator, b) monostable multivibrator. DC Regulated Power Supplies 0- 30VDC/150mA, in built IC555, all interconnections are made using 2mm banana Patch cords, CONNECTING WIRES
Multi o/p programmable linear dc power supply 32 V/3 A,-32V /-3 A,3.3V/5A fixed, Easy operation with up down key, high resolution 10mV,1mA, Over voltage over current protection by software, 50 set memory, self-test and software calibration, international safety regulations, Auto step running with time setting, triple o/p, auto tracking, RS232 communication, high stability, low drift, 4 digit display
Complete setup to design / construct programmable UP/Down counter. Trainer kit to design / construct programmable UP/Down counter. Kit with power supply, display unit, patch cords, manuals and necessary IC.
Complete setup to design controlled shift register and study their function. IC For Universal Shift Register, 5V D.C. at 100mA, IC regulated power supply.,10 Nos. SPDT Switches for inputs,5. Nos. Output LEDs with driver circuit to observe the Output.230V ±10% at 50Hz A.C. Mains, necessary patch cords and user manuals.
Complete setup to design / construct binary synchronous and asynchronous counter. Trainer kit for binary Synchronous and Asynchronous counter. with power supply, display unit, patch cords, manuals and necessary IC.
Digital I.C Tester Universal IC tester: 40 pin DIP ZIF socket, 50 cherry keys Key pad and 16 X 2 LCD Display, suitable for testing of Analog IC, Digital IC and 7-segment display.
To verify Thevenin’s and Norton’s theorems Variable DC Power Supply 1.2V to 12V/500mA Load Resistor Variable Current Source Resistive Network Thevenin’s and Norton’s Equivalent Circuit All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User Manual WITH DIGITAL METERS FOR INPUT & OUTPUT.
To verify Maximum Power Transfer theorem. DC Power Supply 5V to 12V/500mA Variable Load Resistor Resistive Network All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User Manual WITH DIGITAL METERS FOR INPUT & OUTPUT.
To verify Superposition theorem. Dual Variable DC Power Supplies 1.2V to 12V/500mA Resistive Network All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User Manual WITH DIGITAL METERS FOR INPUT & OUTPUT.
To study the series and parallel resonant circuit. Independent Resistors - 3 Nos., Independent Capacitors - 3 Nos., Tapped Inductance. All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User Manual WITH SIGNAL GENERATOR, COUNTER, DIGITAL METERS FOR INPUT & OUTPUT and user manual
To measure the characteristic impedance of symmetrical T and II networks Independent T & II Resistive Attenuators Terminating Impedance (600 Ohms) All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User Manual
To test and to measure the cut –off frequencies of the following: —(a) constant k-type low pass filter;(b) constant k-type high pass filter Two Independent Passive LC Filter Networks (LPF & HPF) All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User Manual
Compare and configure different Network Topologies physically or by using CISCO Packet Tracer software. CISCO Packet Tracer software. OR Inbuilt: com1 to com1, star topology, ring topology, wi-fi net working, fiber optic networking, Lan/Hub
To study standing wave pattern for a transmission line of finite length with:(a) open termination, (b) shorted termination and matched termination. 2.To measure the attenuation constant and phase shift constant for matched termination. Tra nsmission Line Trainer Features:* 30-300 MHz sweep source with detector A. Frequency Domain Analyzer Frequency range : 30-300 MHz typical LCD Display. Level : 100mV p-p Attenuator 50 Ohms : 0.5, 1, 2,4, 8,15 dB, Output Impedance : 50 Ohms Scope out : X-Y output to scope B. Resistive Impedance Analyzer ,Characteristic Imp. : upto 800 ohms ,Display : LCD C. Time Domain Reflectometer PRR Short range : 10MHz typical, Pulse width : <10ns typical, PRR Long range : 100KHz typical Amplitude : 1V nominal, Output Impedance : 50 Ohms Accessories: Lengths of 50 ohms and 75 ohms coaxial cable, 300ohms, parallel line, lossy line, Tee connectors, ,Standard load of 50 and 75 ohms, Various capacitive and inductive loads, shorts, Balun 1:1 & 1:4, Operating manual, Mains cord
Study of different types of Network cables and practically implement the cross wired cable and straight through cable by using crimping tool and RJ-45 Connector. All cables are of proper (length), good quality crimping tools with heads and RJ 45 connectors. Software requirement: Command prompt and packet tracer
Study of basic Network and Network configuration and commands. RJ45 connector, Crimping Tool ,Cat5e Cat6 cable, 8P8C Modular Connectors, LAN Tester
Study of different types of IP Addressing and Subnetting and Super netting concepts. Configuring TCP/IP Network. CISCO Packet Tracer software.
To study the given RC integrator and Differentiator at different time constant. Kit consists of Capacitor (220 p F) , Resistor (R= 5.6 K),Function generator (Square wave 5V pp , input frequency is I kHz) , CRO (dual channel)
8085 Microprocessor Trainer Kit High performance 8085A CPU operating at 3 MHz. 16 K powerful monitor FIRMWARE expandable to 32 K. 64 K user RAM. Expanded RAM accessible using bank Write protect facility for RAM. 3.6 V Ni-Cad battery backup. Versatile Keyboard/Display controller using 8279. 24 highly reliable dual function keys. 6 digit seven segment LED display. Parallel I/O lines available through two 8255 chips. Serial I/O through 8251 USART, with on-board level shifters 1488, 1489.Programmable communication parameters. Built-in audio cassette interface.3 channels of 16 bit timer/counters from 8253. Powerful 8085 interrupt capabilities. On-board EPROM programmer with ZIF socket for programming 2716 to 7512 EPROMs and various EEPROMs. Normal and intelligent programming modes. On-board ADC, DAC, opto-isolator, reed relay and miniature speaker. On-board logic probe.
Microprocessor 8086 Trainer Kit INTEL 8086CPU AT 4.77 MHZ CLOCK SPEED,16KB for monitor EPROM upgradable to 64kb 16KB RAM expandable to 64KB Battery backup provision for RAM upto 64KB 16 x 2 (or) 20 x 4 Alphanumeric LCD display 101 keys IBM compatible keyboard 24 TTL I/O lines brought out to two nos., of 26 pin FRC connector 1 number of standard RS232C compatible serial port brought out to a pin D type male connector.3 channel 16 bit counter/timer using 8253. Fully buffered address data and control signals terminated at a 50 pin header(VXT BUS) for interfacing VBMB series of experiment boards and bus expansion. 8 no’s of interrupt lines are terminated at a 10 pin connector. Kit operates with a single +5V/DC supply The kit and the power supply are mounted on a attractive light gray color fiber glass cabinet with fiber glass top cover. Built-in line assembler & Disassembler Powerful debugging monitor to develop user program.
Black & White TV Trainer kit with provision of fault finding System: CCIR-B, 625 lines, Power supply: 230V Ac, 50 Hz, Regulation range 170v Ac to 270v Ac. Power consumption : 70 watts, Gain Limited sensitivity : 55 dB for Video & 25 dB for Audio Sound output : 2.0 watts maximum. Screen size : 20" Diagonal. Channel: VHF 2 to 12, UHF 21 to 68.
DTH TV and SET TOP BOX TRAINER KIT Power supply 230 V ,50 Hz, Input frequency: KU Band, Output frequency: 950-1450 MHz. Noise temp: 35-degree, DISH ANTENNA, LNBIF FREQUENCY: 70 MHz
Colour TV Trainer with provision of fault finding Standard: CCIR-B-PAL-G, 625 Lines Channels: 230, 2 - 4 VHP I (VL), 5 - 12 VHP III (VH), 12 - 100: BAND IV & V, else : S BAND & HYPER BAND Picture Tube Size : 36 cms. Diagonal RF Input Impedance: 75 W (Ohm)
To study the V-I characteristic of Gunn Diode. Gunn Based Microwave trainer bench with Gunn power supply, GUNN OSCILLATOR, ISOLATOR, VARIABLE ATTEUATOR, FRQUENCY METER, BNC to BNC Cable, SWR METER
FDM Transmitter / Receiver Kit On-board clock generator, Carrier generator 1 KHz ~ 30 KHz, Pilot carrier 256 KHz, 2 channel FDM communication system, DSB AM modulator and demodulator, Band pass filters 9 ~ 11 KHz and 16 ~ 20 KHz, 4th order Butterworth low pass filters, Multimedia based interactive e-manual, Transmitter: High frequency transmission using DSB Multiplexing: Frequency division multiplexing Channel: 02 Band pass filter Pass band: Filter 1 and 3 frequency range 8 ~12 KHz with fc 10 KHz: Filter 2 and 4 frequency range 18 ~ 22 KHz with fc 20 KHz AM /DM modulator Modulation: Amplitude modulation double side band Receiver: Amplitude demodulation of DSB De-multiplexing: Frequency division de-multiplexing Low pass filter,4 order butter worth filter Switch faults:8 switch faults are provided on-board to study different effects on circuit Interconnection:2mm banana socket Test points:25 test points are provided on board to observe intermediate signals Power supply : GND, +5V, +12V, -12V
Trainer Kit to study Reverse Recovery Characteristics of Power Diodes The single Board trainer Kit should contain IC Regulated Power Supply, Different types power diodes, Digital Ammeter and Voltmeter and other necessary passive components
Power Transistor Drive Ckt Study Kit The Single Board trainer kit helps to study different Drive Circuits for Power transistors. The Trainer Kit should contain: i) Different Drive Circuits for Transistors. (ii) Power Transistors and Power Diodes (iii) Inductors, Capacitors and Resistors. Other necessary components for necessary following Power transistors base drive controls circuits
To study drive circuit of SCR Isolated 230 V/40 W AC Power Supply 1.2 V to + 15 V/500 mA DC Power Supply * 0-18 V/500 mA,50 Hz, AC Power Supply * Variable frequency triggering pulses * DC Gate signal control, Pulse gate signal * Synchronous AC gate control signal through DIAC * UJT Triggering * 10:1 On- board resistive attenuator * Provision for 40 W Lamp Load * Set of Patch Chords & user Manual.
To study a single-phase rectifier—output waveform with phase control circuit Trainer Kit to study Single Phase Full wave Bridge Rectifier for fixed DC output, Half Controlled and fully controlled rectification facilities with R and RL, loads 1000 Ohms 10 Watts, 14 ma @ 0.05 A inductive loads. The Single Board Trainer Kit contains : (i) Source for rectification of 4 to 24 V DC fixed and variable output @ a max of 500 ma helps to construct and study Series and Parallel resonance Circuit. (ii) Four Diodes and 4 SCRs in bridge configuration with gradual firing controls and necessary capacitive, inductive and Pie filter components. (iii) Digital Ammeter and Voltmeter.
To plot V/I characteristics of Triac Power Supplies: Isolated Supply 0-220V AT 2A. • Operated on Mains power 230V, 50Hz +10% Components are mounted on the panels are: • TRIAC BT136 • DIAC DB3 • AC Phase Control by RC Firing Circuit. • Snubber Circuit. SALIENT FEATURES: • 10:1 Potential Divider for CRO • Protection Cover • Bulb As Load • Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols. • Instruction manual. • Patch Cords 4mm Both. • High Voltage Test Points are Provided With 4mm Safety Sockets • The trainer is housed in Metal cabinet.
To study a polyphase rectifier Isolated 230 V/40 W AC Power Supply Isolated stepped down 3 PH supply. * 3 Phase diode rectifier in open condition * Provision for Load & CRO output. * Electronic phase sequence finder. * Set of Patch Chords & user Manual
To study SMPS with PWM regulator chip Based on IC 494 as PWM, Input Voltage : 170V to 260VAC, 50Hz., Output Voltage : 5V, -5V, 12V, -12V, Power good signal voltage/as required in computers, Wattage (I/P) : 150 Watt (approx.),Assembled on : PCB or board with providing different test points to observe Waveforms and voltage etc. with fan cooling facility
To plot V/I characteristics of Diac Variable DC Power Supply 1.2V to 35V/500mA DC Power Supply for DPM 5V/500mA DIAC (D32) Forward and Reverse Characteristics of DIAC Digital Meter for Measuring Voltage and Current All Inputs/Outputs through 2mm Sockets
To study a phase control AC regulator Isolated 230 V/40 W, 50Hz AC Power Supply, Triac Phase angle control, 10:1 On-Board Resistive Attenuator, Provision for 40 W Lamp Load with digital meters at load., Set of Patch Chords & user Manual
Servo Regulator Stabilizer Study Kit 500VA Servo stabilizer, 2 Amp Variac, Digital input & output meters, Lamp load, Set of Patch Chords & user Manual.
To study a Jones chopper Isolated 230 V/40 W DC Power Supply, + 5 V/500 mA DC Power Supply * SCR Jones chopper * Gate firing pulses for Jones Chopper * 10:1 On-board Resistive Attenuator * Provision for 40 W Lamp Load * Set of Patch Chords & user Manual.
Compare and demonstrate Network directing devices: Repeater, Hub, Switch, Bridge, Router, and Gateway. (Exp-2) All Network directing devices (separately) with accessories. • 8/16 port HUB • 8/16 Port Managed switch • Wi-Fi Router with 4 antenas • Wi-Fi bridge (2.4 GHz)
To study the speed control of DC motor by:(a) varying field current keeping armature voltage constant; and, (b) varying armature voltage keeping field current constant DC SHUNT MOTOR (FULL COPPER WINDING) .5 HP WITH BASE MOUNT FRAME 1 No VARIAC CONTROLLED 2 DC POWER SUPPLY ( 1 FOR FIELD & 1 FOR ARMATURE) DC VOLT & AMMETER DIGITAL………4 Nos PANEL MOUNTED RPM METER………1 No. WHITE BAKELITE FRONT WITH CONN. DIAGRAM & WOODEN SAFETY BOX. METAL FRAME TABLE (Ply board with sun mica) CUM STAND FOR PANEL
Power Electronics Devices Trainer Kit Should have Built in power supply DC supply: +/- 12V, 500mA, Power supply 17V / 750mA, Regulated 13.5V/3A O/P must be provided as 12V Battery charging supply. Isolated DC supply +12V/ 300mA with isolated common. On board Inverter transformer of Primary : 230V & Secondaries 12-11-0-11-12/3A On board Lamp load of 15W (100W) should be provided. AC supply : 230V AC line voltage must be made available on two banana 4mm sockets Must have Two pulse transformers of 1:1:1 are provided for isolation & supplying firing pulses along with required DC Power supply to experiment panel under test through 15 pin female ‘D’ connector. R-L-C Load Panel Must have Load resistor of 10W / 40W --- 1no. Must have Centre tapped 3A choke 4mH/ 16mH each ----2nos. Must have Commutation capacitors of 10mF/100V -------4nos. Must have AC Paper capacitor of 4mF/440V ---1no.
STEPPER MOTOR STUDY SET FORWARD & REVARSE ROTATION, AUTO & MANUAL SPEED CONTROL WITHOUT MICROPROCESSOR OPERATION. INBUILT PULSE GENERATOR & LED SEQUENCE DISPLAY.
Single Phase Bridge Inverter On board firing circuit: Ramp Comparator method Interconnections: 2 mm sockets (Gold plated) SCR: SCR 2P4M 400V/2A Mains Supply: 220V/110V, 50Hz / 60Hz Operating Conditions: 0-40 C, 85% RH Included Accessories: 2mm Patch cords, Mains cord: 1 no., Learning material (CD): 1 no.
PLC Trainer (EXPERIMENT 1-Use of simulation package for different function of PLC. EXPERIMENT 2- Verify function of logic gates by using PLC. EXPERIMENT 3- Write and verify ladder program for motor ON-OFF Control with two push button) HARDWARE SPECIFICATION: TTL Input Switches: 8 Nos, TTL Momentary Switches: 8 Nos., Proximity Switch: 1 No., Optical Transducer (two state): 1 No., Programmable LEDs: 8 Nos., Analog input 0 to 5V DC: 8 channels, Analog output 0 to 5V DC: 1 No., 4 to 20mA Transmitter: 1No., 4 to 20mA Receiver: 1No., Current Meter: 25mA FSD 1No., Voltmeter: 10V FSD 1 No., Piezo Electric Alarm: 1 bit. Built-in power supply. Dedicated I/O interface card suitable for IBM computer suitable for ISA slot. SOFTWARE SPECIFICATION: This is a GUI based LADDER LOGIC SOFTWAREDRAG AND DROP (D&D) an instruction instead of typing an instruction.
1 KVA ONLINE UPS Trainer kit Technology: SPWM, IGBT/MOSFET (for more than 72 DC volt IGBT preferred), Input Voltage Range: 170‐282VAC, Input Phase: Single Phase with Ground, Nominal Output Voltage:230VAC, Output power factor: 0.8 Lagging, Battery connection Should be Internal only, On Battery Output Voltage Pure Sine wave output at 230VAC.
Power Electronics Development Trainer Size of Breadboard : 172.5 mm × 128.5mm DC Power Supply :+5 V, -5 V 500 mA,+12V, -12 V 500 mA +15 V, 250 mA+35V, -35V, 250 mA AC Power Supply : 18V-0V-18V ,0V-15V On board Firing Circuits Frequency range : 30Hz to 900Hz variable Amplitude : 12V PWM control of G1, G2, G3 and G4
Digital LCR meter Variable measured- L,C,R and loss angle (D factor ) Measured frequencies: 1 KHz, 100KHz Display: 3⅟₂ digit , Resistance: 0 to 20 MΩ, 0.1 Ω, Capacitance: 0 to 20000μF, 0.1 pF Inductance: 0 to 20000 H, 0.1μH ,D factor: 0.01 to 8.0 with 1% error
Distortion Factor Meter Frequency: 20 Hz to 200KHz Distortion:0.1% to 100% f.s.d. in steps, Input sensitivity: 100mV (r.m.s.), Input impedance: 1MΩ/160pF, Voltmeter range: 300μv to 300v
To measure L & Q by Maxwell method FULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX
To measure the unknown capacitance by Schering bridge FULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX
To construct and test a Q-meter This kit consists of Mixed signal generator, Digital meter & specially designed Q Meter system to find out all mixed frequency. Decade Inductance box
To measure the unknown frequency by Wein Bridge FULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER WITH FREQ. COUNTER & CRO SIG. O/P INBUILT& CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., BACKLIGHT LED & WOODEN HARD BOX
Microcontroller Trainer Kit 1.Write a Simple Assembly Programs for a. Addition b. Subtraction b. Multiplication d. Division 2. Write a Programs for (any two of the following) i. 4 x 4 Matrix Keypad Interface ii. character based LCD Interface iii. Analog to Digital Conversion (On chip ADC) iv. Serial EEPROM v. Seven Segment LED Display Interface vi. Interfacing With Temperature Sensor vii. Stepper Motor Interface 8 BIT EMBEDDED MICROCONTROLLER TRAINER FEATURES • Single board design with various resources • Excellent training platform for embedded applications • Software development tools include assembler and ‘C’ compiler • Easy adaptability to different versions of microcontroller in the same family SPECIFICATIONS • Experimental board for 40 pin MCS51 and AVR family of microcontrollers • In-system programming (ISP) facility for many microcontrollers • Double RESET signal with manual key • Crystal frequency: 11.0592MHz • On-board RS232 compatible serial interface terminated in a 9 Pin 'D' female connector • 4×4 matrix keyboard • 16×2 alphanumeric LCD connector (4-bit interface) and trimmer for contrast adjustment • Four 7-segment LED displays • I2C EEPROM (24Cxx) • Real time clock (DS1307) with lithium battery and SRAM • 8-high current output port (500mA) for driving external loads • Two 12V sugar cube relays • Continuous tone piezo buzzer • Temperature sensor socket with thermostat functions • Four 8-bit A/D converter, one 8-bit D/A converter provided by PCF8591 • All port-pins available on 10-pin box header • 8 LEDs for easy logic state monitoring • 8 input trigger switches using 8 push buttons • ISP programming with Flash ISP for AT89S51/52/8252/AVR • Infrared remote control receiver module IC supported • P89V51RD2BN • AT89S52 Installable software on CD • Programmers notepad : Free, open source, text editor • Flash ISP programmer software for 89SXX • Bascom basic compiler (demo version) • MIDE-51: An IDE for MCS-51 microcontroller • WinAVR : open source C compiler for AVR • Sample programs for peripherals DC 12V/500mA output power supply EXPERIMENTS • Study of LED blink • Study of dancing light • Study of LCD display • Study of LCD-keyboard display • Study of 7 –segment display • Study of RC5 remote control test program • Study of analog to digital converter • Study of real time clock (RTC)
To study the function of fiber optic analog link. To study the frequency response of optical receiver at various load conditions. 3. To study the losses in optical fiber: — (a) propagation loss, (b) bending loss. 4. To study the numerical aperture of optical fiber. Basic Fiber Optics Trainer Kit will have features of (i) Numerical Aperture calculation (ii) Fiber Loss Measurements facilities. Transmitter: 1 no., LED 660 nm, Receiver: 1 No., Fiber Optic Photodetector Modulation Techniques: 1. AM 2. FM 3.PWM, Drivers: 1 No. with Analog & Digital modes, Clock: Crystal Controlled Clock 4.096 MHz, PLL Detector: 1 no. AC Amplifier: 1 no. Comparator: 1 no. Filters: 1 No. 4 order Butterworth, 3.4 KHz cutoff Frequency, Analog Band Width : 350 KHz, Digital Band Width : 2.5 MHz, Numerical Aperture of PMMA Fiber, Loss in 1 m/ 5m PMMA Patch cord.
To be familiar with the following network components: THIS WILL BE A FULL PACKAGE OF THE FOLLOWINGS: -** RJ5/CAT5 CABLES 100 METERS RJ 45 CONNECTORS 100 PCS CUTTER & CRIMPING TOOLS FOR RJ45/CAT-5 CABLES CABLE TESTER/TRACKER…….. 4 PCS HUBS WITH ACCESSORIES & TOOL KIT NETWORK INTERFACE DIFFERENT CARD
To be familiar with cordless telephone Digital cordless phone with caller ID, Rechargeable Ni-MH battery Caller ID with 50 name and number memory, 100 name and number phonebook entries, Speaker: Yes Large 1.8-inch LCD display It is not wall mountable and does not come with power failure feature The box includes handset, base, battery, charger and user guide
To measure displacement with LVDT ACTUAL LVDT WITH INSTRUMENTATION AMPLIFIER DC O/P WITH DIGITAL METER, 3and 1/2-digit LED display with polarity indicator, sensitivity of 10mV/mm in the range of 10mm
To measure temperature with thermocouple THERMOCOUPLE SENSOR IN STEEL CASE ELECTRIC WATER JAG. INSTRUMENTATION AMPLIFIER WITH DIGITAL METER CIRCUIT DIAGRAM PRINTED ON KIT EXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER
To measure temperature with thermistor THERMOCOUPLE SENSOR IN STEEL CASE ELECTRIC WATER JAG. INSTRUMENTATION AMPLIFIER WITH DIGITAL METER CIRCUIT DIAGRAM PRINTED ON KIT EXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER
To measure pressure with strain gauge STRAIN GAUGE SENSOR WITH WAIGHT LOADING SYSYTEM SAMPLE WEIGHTS. INSTRUMENTATION AMPLIFIER WITH DIGITAL METER CIRCUIT DIAGRAM PRINTED ON KIT EXTERNAL MOUNTED ACTUAL SENSOR
To plot the Characteristics of RTD (PT-100) RTD 3 WAIR SENSOR IN STEEL CASE ELECTRIC WATER JAG. INSTRUMENTATION AMPLIFIER WITH DIGITAL METER CIRCUIT DIAGRAM PRINTED ON KIT EXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER
Temperature controller with on-off controller, Temperature controller with PI controller, Temperature controller with PID controller Temperature controller with facilities for P, I, D and relay control blocks, Operating temperature: Ambient to 90°C, Separate controls for P, I, D channel gains, two settings for relay hysteresis, Fast 25W oven fitted with IC temperature sensor, forced cooling option to ready oven for next experiment, Digital display of set and measured temperature on a 3½ digit built-in DVM, 0-9999 sec, timer on panel for a convenient temperature response experiment, Buffered output for recorder
Discrete Components and ICs AT 59C8051,2051,8052,12F68,16F675,16x2 LCD Display,7 segment common anode LED display,12 MHz crystal, Wireless TX/RX module, Bluetooth Module, Ultrasonic Module for Project work
Arduino Mega Board Standard Specifications
On - Off Temperature Controller Trainer Product Specification: Temperature Range - 32 to 475 Degree F, Controller Function Type - ON-off, Accuracy : -+2 %, Type - Digital, Voltage - 240 V, Frequency - 50 Hz, Rated Current - 0.5 A, Product Description 1. Temperature On/ Off Controller • Minifurnace (100°C) with cooling fan provided. • Digital Indicator to display the set point and real temperature. • Temperature sensor to sense the furnace temperature. • Signal conditioner for above sensor. • This sensor senses the furnace temperature and keeps it at the desired value by ON/OFF control method. • Potentiometer provided to vary dead band in ON/OFF control
Automation LCD PLC Trainer Kit, For Laboratory, PLC MAKE: Allen-bradley Pico / micro 810 / std. Equivalent. • Micro810 Controller, 8IN 120/240VAC, 4RLY, AC PWR • 8 Digital input / 4 Digital outputs • 24VDC, 3A Power source. Size 4”X2”X2” • I/p- O/p LED indication on front panel • PC interface facility. PC-PLC interfacing cable1760-CBL-PM02 • 2080-USBADAPTER: USB Adapter Plug for Micro810 12-pt only • 2080-LCD: 1.5 LCD Display and Keypad, for Micro810 Only (Optional) • Necessary I/p-O/p simulating devices • Ladder diagram programming on PC. Ladder Programming Software : CCW / Pico Soft/ Eqvt. • SCADA SOFTWARE connectivity for PLC.(optional) • Electrical control panel for simulation of digital inputs (Using switches 8 no & proximity sensors 1no) • Front panel for display of digital output status: LED indicators (4no) • PLC panel dimensions: 2Ft. X 1Ft. X 2Ft. With visible transparent front facial • Inductive/ Optical proximity switches (digital inputs) • Output compatibility to Solenoid valves, Electric motors as actuating elements in respective assorted modules
IOT DEVELOPMENT SETUP MODEL: CT-IOT-AIO-01 • This is a single board full IOT development system • On board ARDUINO UNO boardDIL type • On board RASPBERRY PI 4 8GB board with NOOBS in SD card & all cables • On board LED/LCD/OLED display • Communication Interfaces • 10/100 Ethernet • 2.4GHz802.11n wireless • Bluetooth 4.1 Classic • Bluetooth Low Energy • SPI, • I2C • 8 Analog I/O • 31 GPIOs to interface external sensors • 4 USB 2.0 port • 3.5mm analog audio-video jack • HDMI output • Camera Serial Interface (CSI) • Display Serial Interface (DSI) • On board Sensors • ADXL345 - Triple Axis Accelerometer SensorSMD • Type) SHT31 – Temperature & Humidity Sensor (SMD Type) • Onboard User interfaces • 3x3 channel relay 3 RGB LED • 2 Push button Buzzer • OLED display • Additional External Sensors & Accessories • Power Adaptor with USB Cable HDMI to VGA Converter • IR Sensor PIR Sensor • Magnetic Door Sensor DHT11 Sensor Ultrasonic Sensor LM35 Module • LuX Sensor - BH1750 Soil Moisture Sensor Rain Sensor • GAS Sensor (MQ2) Air Quality Sensor (MQ135) Water Turbidity Sensor Water Oxygen Sensor
Study of for various signalling and fault insertion techniques set GSM Handset trainer kit. • Operate both on Windows and Linux platform • USB Interface for communication • Best suitable for IoT gateway application • External connector to interface with any microcontroller • Easy understanding of AT commands • Real time operation • Built in network status LED • Audio interface connector • Simple/Easy operation • External antenna • Application module relay interface for AC device (optional)
To study Transmitter and receiver sections in mobile handset and measure frequency band signal. • Real time Mobile Operation • Full understanding of mobile phone working • Frequency measurement and band verification • Provides study of all sections in mobile phone • TX/RX Frequency measurement • 3G/4G technology and GMSK signals • GSM data rate • Detail study of User Interface Control Signals • Detail study of SIM Operation • Battery identification and charging study • Switched Faults
Study the GPRS system and use it for sending an e mail through WI-GRPS Trainer Wi-GRPS Trainer Kit. Wi-GRPS Trainer Kit.
DRPU ID card maing software • Design and create cards using image designing tools including Line, Ellipse, Pencil, Rectangle, Text, Barcode, Picture, Arc, Triangle and Star objects. • Design and create card and label in Rectangle, Rounded Rectangle or Ellipse shapes. • Option to specify the color and background settings of created ID card including Solid Color, Gradient, Image and Style settings. • Option to print created ID card using advance print settings. • Generate the multiple copies of ID card with different barcode and text value with bulk image printing process.
Colour printer Epson Ecotank L8050 A4 Single function Ink tank printer
Heavy Duty PVC ID Card Die Cutter Full Metal Body Punching Size: 85.6 X 54mm. Punching Thickness: 0.1-1mm. Inlet dimension: 105 X 297mm. Machine Size: 15.8*23.5*32.5cm. Dual uses, can be used to cut PVC as well as paper
Sony Desktop Projector or equivalent to sony Dimensions: 325.1 x 79.8 x230.5 mm Display Type: LCD Focus: Manual Operating Temperature: 0 – 35 Deg C Power consumption: 215 W Screen Size: 0.76 – 7.62 m Voltage: 100 – 120 V Weight: 2.7 Kg Zoom Ratio: Approx. x 1.2 Additional Details: Number of Pixels: 2359296 Zoom: Manual
PODDAR SYSTEM AND SERVICES
SUSHAMA ELECTRONICS
Sikdar Scientific Agency
MD TECHNOCRATE.
DELTA TECHNOLOGIES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.68 MB
BOQ_1400017.xls
BOQ • 0.48 MB
NIT666.pdf
Tender Documents • 1.67 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .